Gebruiksaanwijzing /service van het product W 211 van de fabrikant Miele
Ga naar pagina of 64
Operating instructions f or W ashing machine W 211 T o avoid the risk of accidents or damage to the machine it is essential to read these operating instructions before it is installed or used for the first time.
Disposal of the packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Caring for our en vironment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance or machine .
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 29 Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Altering a programme once selected . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 T ranspor t base .
T o avoid the risk of accidents and damage to the machine please read these instructions carefully befor e using it for the first time. They contain important infor mation on its safety , use and maintenance. Keep these operating instructions in a safe place and ensure that new users are familiar with the content.
This machine must only be connected to the on-site water supply using a new hose kit. Old hoses must not be re-used. Check the hose regularly for signs of wear and tear . Change in good time to avoid the risk of leaks and subsequent damage. Faulty components must only be replaced by genuine Miele original spare parts.
The transport base lever must be over to the left when the washing machine is in operation. Only then is the stability of the machine guaranteed. If the correct amount of detergent is dispensed, the machine should not need to be descaled.
Y our machine also has the following special programmes in addition to the standard Cottons and Minimum ir on programmes. Special programmes – Silks / Hand-washable fabrics which crease easily and do not contain wool can be washed in the Silks / programme (30°C temperatur e only).
Time left display After the start of a programme, the duration of the programme selected will be shown in the display counting down in hours and minutes and finally in minutes. At some points during the wash, the time shown can change. This is normal.
Control panel a Display See the following page for more information. b Start button starts the wash programme. c Additional option b uttons Additional options can be added to the basic programme. Use the top button to select the Intensive , Pre-wash , or Soak option or a combination of these options.
Programme duration After a programme has started, the maximum programme duration (wash time) will appear in the display in hours and minutes. In the Cottons , Minimum iron and Auto - matic programmes, the machine measures the amount of water absorbed by the laundry and uses this to calculate the load during the first 10 minutes.
Important control panel features Programme selector The programme selector is used to set the basic wash programme and the temperature for that pr ogramme.
Before using the machine for the first time ensure that it is corr ectly installed and connected. See the relevant section under "Installation". Also check that the fluff filter is securely tightened. Otherwise ther e is a risk of water leakage during use.
Energy and water consumption – W ater consumption and energy usage are determined by the size of the load. – Use the Automatic or the Quick wash programme for smaller amounts of laundry .
Brief instructions Please note: T o help familiarise yourself with your washing machine, please read the sections "Before washing", "Loading the drum and adding detergent", "Selecting a programme" and "At the end of a programme" in detail.
Programme c hart Cottons 30°C to 95°C 9ö876 Fabric Cottons and linen fabrics, e.g. bed linen, table linen, towelling, jeans, underwear , T -shirts, nappies. Additional options Soak, Pre-wash, Intensive, W ater plus Notes – Only use the Cottons 95°C programme for heavily soiled laundry .
Delicates cold to 40°C 21 Fabric For delicate garments made of synthetic fibres, mixed fibres and easy care cotton shirts and blouses. Curtains, including net cur tains, specified as machine-washable by the manufacturer .
Quick wash 40°C 7 Fabric V er y lightly soiled fabrics, which can be washed in the Cottons programme. Additional option W ater plus Notes – Use less detergent (as for a half load). – If fabrics have a high proportion of man-made fibres it is advisable to programme the machine for "Gentle Action".
Important - other care symbols / Hand wash (If no temperature is specified use the lowest temperature or cold) h Do not wash apf Dry clean D Do not dry clean y Suitable for chlorine bleaching z Do not.
Before washing A Sort the laundr y ^ Empty all pockets. , Foreign objects (e.g. nails, coins, paper clips, etc.) can cause damage to garments and components in the machine. ^ Badly soiled areas, e.g. collars and cuffs, and water soluble stains can be pre-tr eated with bar soap, liquid detergent or detergent mixed into a solution or paste.
Loading the drum and adding detergent B Switch on the washing machine and open the drum ^ Press the I-On/0-Off button in. ^ Press the Lid button and open the outer lid fully . ^ Open the inner lid. a Inner lid b Detergent dispenser drawer , T ake care.
C Load the laundry ^ Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. T o protect multi-layer ed garments with particularly fine outer layers from damage, always use a washing bag.
T ake care not to trap items of laundry when closing the drum flaps. ^ Close the inner lid by pressing gently on the lock so that it clicks into position. If the inner lid is not closed properly , the wash programme cannot start and the Excess detergent check light will flash rapidly .
E Add deter gent It is important to dispense the correct amount, because . . . . . . too little detergent results in: – Laundry not getting properly clean and over time becoming grey and hard to the touch. – Greasy particles clinging to the laundry .
Programme selection G Select a programme ^ T ur n the programme selector to the requir ed programme. The maximum duration for the programme will appear in the display . H Select a spin speed ^ Press the “Spin” button r epeatedly until the indicator light for the spin speed you want comes on.
Intensive For normal to heavy soiling or where staining is visible. The duration of the main wash is increased. Pre-wash For heavily soiled and stained items. Soak For heavily soiled and stained items with protein stains (e.g. blood, fats and oils, cocoa).
At the end of a programme K Open the lid ^ Press the Lid button. ^ Open the outer lid fully . ^ Open the inner lid. L Open the drum and remove the laundry Check that all items have been removed fr om the drum. Items left in the drum could discolour other items in the next wash or become discoloured themselves.
Adding or remo ving laundry after a programme has started Laundry can be added or removed after any programme has alr eady started. ^ Press the Lid button. The drum will automatically rotate to the correct position for opening. The Rinse hold and Without spin indicator lights will flash alternately .
Interrupting a programme ^ Switch the washing machine off with the I-On/0-Off button. T o continue with the same programme: ^ Switch the machine back on with the I-On/0-Off button.
Programme sequence This washing machine has fully electronic contr ols with automatic load recognition. This machine takes in the right amount of water requir ed for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations shown in the display can vary .
W oollens / Main wash W ater level: medium W ash rhythm: Woollens Rinses W ater level: medium No of rinses: 2 Spinning Rinse and interim spin 2) : yes Final spin: yes Quick wash Main wash W ater level.
All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), tablets, liquid tablets and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent.
Fabric conditioner s and liquid starc h Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stif fens and gives body to items of laundry , e.g. shirts, tablecloths and bed linen. ^ Dispense according to the amount specified on the packaging.
, Disconnect the machine from the mains electricity supply and withdraw the plug from the socket before cleaning the machine. ^ Clean the casing with a mild non-abrasive cleaning agent or with soap and water . Wipe dr y with a soft cloth. ^ Clean the fascia panel with a damp cloth and wipe dry with a soft cloth.
Cleaning the detergent dispenser drawer Remove detergent residues r egularly . ^ Pull out the detergent dispenser drawer and remove. ^ Pull out the conditioner insert and the siphon tube (see arrows). ^ Clean the detergent dispenser drawer , conditioner inser t and siphon tube under running warm water .
Cleaning the filter in the water inlet The washing machine has a filter to protect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months, or more often if there ar e frequent interruptions to the external water supply .
With the help of the following notes, minor faults in the perfor mance of the appliance, some of which may result fr om incorrect operation, can be put right without contacting the Service Department.
The wash programme stops and a fault indicator light comes on. Prob lem P ossible cause Remedy A The Check drain light flashes. "- - -" appears in the display .
A fault indicator light comes on but the wash pr ogramme continues as normal. Prob lem P ossible cause Remedy A The Check drain light flashes. The drain outlet is restricted. Clean the fluff filter and the drain pump as described in "Problem solving guide – Opening the lid in the event of a blocked water outlet and/or a power failure".
General prob lems or an unsatisfactory wash result. Prob lem P ossible cause Remedy The machine shakes during the spin cyc le. The transport base lever has not been moved over to the left. Push it over to the left. The laundry is not spun satisfactorily .
Prob lem P ossible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, cof fee and tea stains. – Use a general purpose detergent containing a bleaching agent.
Prob lems with opening/closing or a "b uzzing" sound Prob lem P ossible cause Remedy The drum opening is not in the upper position. An imbalance has prevented automatic drum positioning. T ur n the drum by hand to the correct position. Always mix large and small items in a load to avoid imbalance.
Opening the lid in the event of a bloc ked drain outlet and/or power failure ^ Switch the washing machine off. ^ Use the yellow lever to open the access flap. Blocked drain outlet If the drain outlet is blocked, up to 25 litres of water will be r etained in the machine.
^ Clean the fluff filter thor oughly . ^ Check that the impeller can turn easily . Remove any foreign objects (e.g. buttons, coins, etc.) and fluff. Clean the fluff filter housing. ^ Put the fluff filter back in place and secure. , Make sure it is secur ely tightened.
After Sales Service In the event of any faults which you cannot remedy yourself, please contact – Y our Miele Dealer or – The Miele Service Department (see back cover for address).
Front vie w a Mains connection cable b Inlet hose c Lid with fascia panel d Access to fluff filter , drain pump and emergency release e T ranspor t base lever f Feet g Flexible drain hose with detacha.
T ranspor t base This washing machine is fitted with a transport base to allow it to be moved around. Push the lever o ver to the left when using the machine Only then is the stability of the machine guaranteed. , If the lever is not in the left position, the washing machine can move about during washing and spinning and cause a lot of damage.
Removing the transit fittings ^ Remove the packaging and position the washing machine where you want to use it. ^ Unscrew and r emove the 4 outer screws marked A . ^ Unscrew the 4 scr ews marked B . These screws must then be left on the transit bars (see illustration).
Installation surface A concrete floor is the most suitable installation surface for a washing machine. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. , Ensure that the machine feet and the floor are dry to prevent the machine from slipping during the spin cycle.
The Miele water protection system The Miele water protection system protects the washing machine fr om water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose – The inlet hose can withstand pressur e of more than 7,000 kPa.
Connection to the water supply The machine should be connected to a mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.
Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre. The 1.5 metre long drain hose must not be kinked as this would restrict drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if requir ed, with a sharp twist and pull.
Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations. Ensure power is not supplied to the appliance until after installation work has been carried out.
Load Consumption data Energy W ater Duration in kWh in litres Normal Intensive Cottons 95°C 5.0 kg 1.70 45 1 h 45 min 2 h 00 min 60°C 1) 5.0 kg 0.85 45 – 1 h 59 min 60°C 5.0 kg 0.85 45 1 h 29 min 1 h 59 min 40°C 1) 5.0 kg 0.50 45 – 1 h 59 min 40°C 5.
Height 90 cm Height with lid open 139 cm Width 45 cm Depth 60 cm Weight, empty 99 kg Capacity 5 kg dry laundr y V oltage see data plate Connected load see data plate Fuse rating see plug Consumption data see "Consumption data" section W ater flow pressur e min.
Progr ammable functions f or changing standard settings.
The programmable functions can be used to tailor washing programmes to suit your individual requir ements. The programmable functions ar e activated with the help of the Start button and the programme selector . W ater plus system Selecting the W ater plus additional option increases the water intake in the programmes listed below .
Follow steps A to G to pr ogramme and store a setting in memory . Before you begin, first ensur e that: – The washing machine is switched off. – The machine is properly closed. – The programme selector is at Finish . A Press the Start button and keep it pressed in whilst carrying out steps B to C .
Gentle action Activating gentle action reduces the drum action and is suitable for washing slightly soiled items more gently . It should be activated for garments with a single bar under the care label and for articles which feel too hard after they have been dried.
T op-up rinse for Cottons When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. T op-up rinse takes place when temperatures of 95°C and 75°C ar e selected.
Memory Function If an additional option(s) is selected for a programme, and / or the spin speed is altered, the machine stor es these changes in memory at the star t of a programme.
Soak A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process. If the soak option is pressed the selected soak time will be carried out for the period selected before the wash programme is run. The machine is set as standard to a two hour soak time.
Alteration rights reserved/3404/W 211 This paper consists of cellulose which has been bleached without the use of chlorine. M.-Nr . 06 272 390 / 00 gb / GB.
Een belangrijk punt na aankoop van elk apparaat Miele W 211 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Miele W 211 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Miele W 211 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Miele W 211 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Miele W 211 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Miele W 211 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Miele W 211 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Miele W 211 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
