Gebruiksaanwijzing /service van het product MS-6775 (v1.x) van de fabrikant MSi
Ga naar pagina of 97
i KT6M-ILS V ersion 1.0 G52-M6775X1 MS-6775 (v1.X) A TX Mainboard.
ii Manual Rev: 1.0 Release Date: August 2003 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
iii Copyright Notice The material in this document is the intellectual property of MICRO-ST AR INTERNA TIONAL . W e take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
iv 1 . Always read the safety instructions carefully. 2 . Keep this User ’ s Manual for future reference. 3 . Keep this equipment away from humidity. 4 . Lay this equipment on a reliable flat surface before setting it up. 5 . The openings on the enclosure are for air convection hence protects the equipment from overheating.
v CONTENTS FCC-B Radio Frequency Interference Statement ........................................... i i Copyright Notice .......................................................................................... i i i Revision History ................
vi Serial Port Connector: COMA ..................................................... 2-10 RJ-45 LAN Jack (Optional) .......................................................... 2-11 1394 Port .............................................................
vii Control Keys ................................................................................. 3 - 3 Getting Help .................................................................................. 3 - 3 The Main Menu ..............................
1-1 Getting Started Chapter 1. Getting Started Thank you for purchasing KT6M-ILS (MS-6775 v1.X) A TX mainboard. The KT6M-ILS is based on VIA ® Apollo KT600 & VT8237 chipsets and provides eight USB 2.0 ports for high- speed data transmission and Realtek ALC655 chip for 6-channel audio output.
1-2 MS-6775 ATX Mainboard Mainboard Specifications CPU h Supports Socket A (Socket-462) for AMD ® Athlon™/Athlon™ XP /Duron™ processors. h Supports Athlon™/Athlon™ XP 2700+ processor and higher. Chipset h VIA ® Apollo KT600 chipset - FSB @200/266/333/400 MHz.
1-3 Getting Started On-Board Peripherals h On-Board Peripherals include: - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes - 1 serial port (COM A) - 1 parallel port supports SPP/EPP/ECP mode - 1 audio port - 8 USB 2.0 ports (Rear * 4/ Front * 4) Audio h 6 channels software audio codec Realtek ALC655.
1-4 MS-6775 ATX Mainboard Mainboard Layout KT6M-ILS (MS-6775 v1.X) A TX Mainboard BATT + D D R 1 D D R 2 D D R 3 A T X P o w e r S u p p l y JBA T1 SW1 SW2 SA TA1 SA TA2 SOCKET 462 BIOS PCI Slot 5 PCI.
1-5 Getting Started Live BIOS™/Live Driver™ The Live BIOS™/Live Driver™ is a tool used to detect and update your BIOS/drivers online so that you don’t need to search for the correct BIOS/driver version throughout the W eb site. T o use the function, you need to install the “MSI Live Update 2” application.
1-6 MS-6775 ATX Mainboard SOCK ET 462 Color Management MSI has an unified color management rule for some connectors on the mainboards, which helps you to install the memory modules, expansion cards and other peripherals devices more easily and conveniently.
1-7 Getting Started Round Cable (Optional) Round cable is an enhanced cable for PCI IDE and Ultra DMA controller. It has the following benefits: h Data transfer rate at 133MB/s h Backward compatibilit.
2-1 Hardware Setup Chapter 2. Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard. Also, it provides the instructions on connecting the peripheral devices, such as the mouse, keyboard, etc.
2-2 MS-6775 ATX Mainboard SOCKET 462 Quick Components Guide CNR Slot , p.2-23 JCASE1 , p.2-15 DDR DIMMs , p.2-6 CPU , p.2-3 Back Panel I/O , p.2-9 CFAN1 , p.2-14 FDD1 , p.2-14 JFP2 , p.2-18 JFP1 , p.2-18 JBAT1 , p.2-21 AGP Slot , p.2-23 JAUD1 , p.2-19 PCI Slots , p.
2-3 Hardware Setup Central Processing Unit: CPU CPU Core Speed Derivation Procedure If CPU Clock = 100MHz Core/Bus ratio = 14 then CPU core speed = Host Clock x Core/Bus ratio = 100MHz x 14 = 1.4 GHz The mainboard supports AMD ® Athlon™, Athlon™ XP and Duron™ processors in the 462 pin package.
2-4 MS-6775 ATX Mainboard 1 . Please turn off the power and unplug the power cord before installing the CPU. 2 . Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90- degree angle. 3 . Look for the gold arrow. The gold arrow should point to- wards the lever pivot.
2-5 Hardware Setup The following instructions will guide you through the heat sink installation procedures. Please consult your agent for the proper CPU cooler set. 1. Position your CPU cooler set onto the CPU. 2. Use one end of the clip to hook the latch of the CPU sliding plate.
2-6 MS-6775 ATX Mainboard The mainboard provides 3 slots for 184-pin DDR SDRAM DIMM (Double In-Line Memory Module) modules and supports the memory size up to 3GB. You can install PC3200/DDR400, PC2700/DDR333, PC2100/ DDR266 or PC1600/DDR200 modules on the DDR DIMM slots (DDR 1~3).
2-7 Hardware Setup Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket.
2-8 MS-6775 ATX Mainboard Power Supply The mainboard supports A TX power supply for the power system. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused. A TX 20-Pin Power Connector: JWR1 This connector allows you to connect to an ATX power supply.
2-9 Hardware Setup The back panel provides the following connectors: Back Panel Mouse Connector The mainboard provides a standard PS/2 ® mouse mini DIN connector for attaching a PS/2 ® mouse. You can plug a PS/2 ® mouse directly into this connector.
2-10 MS-6775 ATX Mainboard Keyboard Connector The mainboard provides a standard PS/2 ® keyboard mini DIN connector for attaching a PS/2 ® keyboard. You can plug a PS/2 ® keyboard directly into this connector.
2-11 Hardware Setup Serial Port Connector: COMA The mainboard offers one 9-pin male DIN connector as serial port COMA. The port is 16550A high speed communication port that sends/receives 16 bytes FIFOs. Y ou can attach a serial mouse or other serial devices directly to the connector.
2-12 MS-6775 ATX Mainboard Audio Port Connectors Line Out is a connector for Speakers or Headphones. Line In is used for external CD player, Tape player, or other audio devices. Mic is a connector for microphones. 1/8” Stereo Audio Connectors MSI Reminds Y ou.
2-13 Hardware Setup Parallel Port Connector: LPT1 The mainboard provides a 25-pin female centronic connector as LPT. A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
2-14 MS-6775 ATX Mainboard Fan Power Connectors: CF AN1/SF AN1 The CF AN1 (processor fan) and SF AN1 (system fan) support system cooling fan with +12V.
2-15 Hardware Setup IDE1 IDE2 Hard Disk Connectors: IDE1 & IDE2 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100/ 133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 66/ 100/133 function. You can connect up to four hard disk drives, CD-ROM, 120MB Floppy and other devices.
2-16 MS-6775 ATX Mainboard MSI Reminds Y ou... Please do not fold the serial A T A cable in a 90-degr ee angle, since this will cause the loss of data during the transmission.
2-17 Hardware Setup How to attach the IEEE 1394 Port: IEEE 1394 Connectors: J1394 The mainboard provides one 1394 pin header that allows you to connect optional IEEE 1394 ports.
2-18 MS-6775 ATX Mainboard CD-In Connector: JCD1 This connector is provided for CD-ROM audio. Front Panel Connectors: JFP1 & JFP2 The mainboard provides two front panel connectors for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel ® Front Panel I/O Connectivity Design Guide.
2-19 Hardware Setup Front Panel Audio Connector: JAUD1 The JAUD1 front panel audio connector allows you to connect to the front panel audio and is compliant with Intel ® Front Panel I/O Connectivity Design Guide.
2-20 MS-6775 ATX Mainboard Front USB Connectors: JUSB1 & JUSB2 The mainboard provides two USB 2.0 pin headers JUSB1 & JUSB2 that are compliant with Intel ® I/O Connectivity Design Guide. USB 2.0 technology increases data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster than USB 1.
2-21 Hardware Setup The motherboard provides the following jumpers for you to set the computer’s function. This section will explain how to change your motherboard’s function through the use of jumpers. Clear CMOS Jumper: JBAT1 There is a CMOS RAM on board that has a power supply from external battery to keep the data of system configuration.
2-22 MS-6775 ATX Mainboard FSB Clock Jumper: SW1, SW2 These two jumpers provide 100MHz, 133MHz, 166MHz, and 200MHz Front Side Bus frequency selection for overclocking purpose.
2-23 Hardware Setup Slots PCI (Peripheral Component Interconnect) Slots The PCI slots allow you to insert the expansion cards to meet your needs. When adding or removing expansion cards, make sure that you unplug the power supply first.
2-24 MS-6775 ATX Mainboard PCI Interrupt Request Routing The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor.
3-1 BIOS Setup Chapter 3. BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. Y ou may need to run the Setup program when: An error message appears on the screen during the system booting up, and you are required to run SETUP.
3-2 MS-6775 ATX Mainboard Entering Setup Power on the computer and the system will start POST (Power On Self T est) process. When the message below appears on the screen, press <DEL> key to enter Setup.
3-3 BIOS Setup Control Keys Getting Help After entering the Setup utility, the first screen you see is the Main Menu. Main Menu The main menu displays the setup categories the BIOS supplies. Y ou can use the arrow keys ( ↑↓ ) to select the item. The on-line description for the selected setup category is displayed at the bottom of the screen.
3-4 MS-6775 ATX Mainboard The Main Menu Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to setup the items of AMI ® special enhanced features.
3-5 BIOS Setup Frequency/V oltage Control Use this menu to specify your settings for frequency/voltage control. Set Supervisor Password Use this menu to set Supervisor Password.
3-6 MS-6775 ATX Mainboard Standard CMOS Features The items inside ST ANDARD CMOS SETUP menu are divided into 9 categories. Each category includes none, one or more setup items. Use the arrow keys to highlight the item you want to modify and use the <PgUp> or <PgDn> keys to switch to the value you prefer.
3-7 BIOS Setup T ype Select how to define the HDD parameters Cylinders Enter cylinder number Heads Enter head number W rite Precompensation Enter write precomp cylinder Sectors Enter sector number Max.
3-8 MS-6775 ATX Mainboard Advanced BIOS Features Quick Boot Setting the item to Enabled allows the system to boot within 5 seconds since it will skip some check items. A vailable options: Enabled , Disabled . Full Screen Logo Show This item enables you to show the company logo on the bootup screen.
3-9 BIOS Setup 1st/2nd/3rd Boot Device The items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system. T ry Other Boot Devices Setting the option to Ye s allows the system to try to boot from other devices if the system fails to boot from the 1st/2nd/3rd boot device.
3-10 MS-6775 ATX Mainboard Password Check This specifies the type of AMIBIOS password protection that is implemented. Setting options are described below. Boot T o OS/2 This allows you to run the OS/2 ® operating system with DRAM larger than 64MB. When you choose No , you cannot run the OS/2 ® operating system with DRAM larger than 64MB.
3-11 BIOS Setup APIC Function This field is used to enable or disable the APIC (Advanced Programmable Interrupt Controller). Due to compliance to PC2001 design guide, the system is able to run in APIC mode. Enabling APIC mode will expand available IRQs resources for the system.
3-12 MS-6775 ATX Mainboard Advanced Chipset Features DRAM Timing Control Press <Enter> and the following sub-menu appears. Current Host Clock This item shows the current CPU frequency. Configure SDRAM Timing by Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module.
3-13 BIOS Setup Frequency, SDRAM CAS# Latency, Row Precharge Time, RAS Pulse W idth, RAS to CAS Delay and SDRAM Bank Interleave automatically to be determined by BIOS based on the configurations on the SPD. Select- ing User allows users to configure these fields manually.
3-14 MS-6775 ATX Mainboard Bank Interleave This field selects 2-bank or 4-bank interleave for the installed SDRAM. Disable the function if 16MB SDRAM is installed. Settings: Disabled , Auto, 2-W ay and 4-W ay . SDRAM Burst Length This setting allows you to set the size of Burst-Length for DRAM.
3-15 BIOS Setup AGP Mode The item sets an appropriate mode for the installed AGP card. Setting options: 1x , 2x , 4x . Select 4x only if your AGP card supports it.
3-16 MS-6775 ATX Mainboard Power Management Features ACPI Standby State This item specifies the power saving modes for ACPI function. If your operat- ing system supports ACPI, such as W indows 98SE, Windows ME and W in- dows 2000, you can choose to enter the Standby mode in S1 (POS) or S3 (STR) fashion through the setting of this field.
3-17 BIOS Setup is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the card does not support the initialization feature, the display may work abnormally or not function after resuming from S3.
3-18 MS-6775 ATX Mainboard After AC Power Loss This setting specifies whether your system will reboot after a power failure or interrupt occurs. A vailable settings are: Power Off Leaves the computer in the power off state. Power On Leaves the computer in the power on state.
3-19 BIOS Setup MSI Reminds Y ou... If you have changed this setting, you must let the system boot up until it enters the operating system, before this function will work.
3-20 MS-6775 ATX Mainboard PNP/PCI Configurations This section describes configuring the PCI bus system and PnP (Plug & Play) feature. PCI, or P eripheral C omponent I nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its special components.
3-21 BIOS Setup For better PCI performance, you should set the item to higher values. Settings range from 32 to 248 at a 32 increment. PCI IDE BusMaster Set this option to Enabled to specify that the IDE controller on the PCI local bus has bus mastering capability.
3-22 MS-6775 ATX Mainboard Integrated Peripherals OnBoard PCI Controller This is used to enable or disable the onboard PCI controller. Please note that the options showed on your BIOS might be different depending on the motherboard you buy. 1394 Controller, AC’97 Audio Set these options to Enabled to enable the controllers of these 3 PCI devices.
3-23 BIOS Setup Floopy Disk Controller This is used to enable or disable the onboard Floppy controller. Serial Port 1 This item specifies the base I/O port address of the onboard Serial Port 1 (COM A). Selecting Auto allows AMIBIOS to automatically determine the correct base I/O port address.
3-24 MS-6775 ATX Mainboard Port IRQ When Parallel Port is set to Auto , the item shows Auto indicating that BIOS determines the IRQ for the parallel port automatically. Port DMA This feature needs to be configured only when Parallel Port Mode is set to the ECP mode.
3-25 BIOS Setup PC Health Status This section shows the status of your CPU, fan, overall system status, etc. Monitor function is available only if there is hardware monitoring mechanism onboard.
3-26 MS-6775 ATX Mainboard Use this menu to specify your settings for frequency/voltage control. Spread Spectrum When the motherboard’ s clock generator pulses, the extreme values (spikes) of the pulses creates EMI (Electromagnetic Interference).
3-27 BIOS Setup Set Supervisor/User Password When you select this function, a message as below will appear on the screen: T ype the password, up to six characters in length, and press <Enter>. The password typed now will replace any previously set password from CMOS memory .
3-28 MS-6775 ATX Mainboard Load High Performance/BIOS Setup Defaults The two options on the main menu allow users to restore all of the BIOS settings to High Performance defaults or BIOS Setup defaults.
A-1 Using 4- or 6-Channel Audio Function Appendix A: Using 4- or 6-Channel Audio Function The motherboard is equipped with Realtek ALC655 chip, which provides support for 6-channel audio output, including 2 Front, 2 Rear, 1 Center and 1 Subwoofer channel.
A-2 MS-6775 ATX Mainboard Installing the Audio Driver Y ou need to install the driver for Realtek ALC655 chip to function properly before you can get access to 4-/6-channel audio operations. Follow the proce- dures described below to install the drivers for different operating systems.
A-3 Using 4- or 6-Channel Audio Function 3. Click Next to start installing files into the system. 4. Click Finish to restart the system. Select this option.
A-4 MS-6775 ATX Mainboard Using the Back Panel In addition to a default 2-channel analog audio output function, the audio connectors on the Back Panel also provide 4- or 6-channel analog audio output function if a proper setting is made in the software utility.
A-5 Using 4- or 6-Channel Audio Function 2 3 4 5 6.
A-6 MS-6775 ATX Mainboard Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility.
A-7 Using 4- or 6-Channel Audio Function 4-Channel Mode for 4-Speaker Output The audio jacks on the back panel always provide 2-channel analog audio output function, however these audio jacks can be transformed to 4- or 6- channel analog audio jacks by selecting the corresponding multi-channel operation from No.
A-8 MS-6775 ATX Mainboard 6-Channel Mode for 6-Speaker Output Refer to the following diagram and caption for the function of each jack on the back panel when 6-Channel Mode is selected.
A-9 Using 4- or 6-Channel Audio Function Testing the Connected Speakers MSI Reminds Y ou... 6 speakers appear on the “Speaker Test” window only when you select “6-Channel Mode” in the “No. of Speakers” column. If you select “4-Channel Mode”, only 4 speakers appear on the window.
A-10 MS-6775 ATX Mainboard 4. While you are testing the speakers in 6-Channel Mode, if the sound com- ing from the center speaker and subwoofer is swapped, you should select Swap Center/Subwoofer Output to readjust these two channels .
A-11 Using 4- or 6-Channel Audio Function Playing KaraOK The KaraOK function will automatically remove human voice (lyrics) and leave melody for you to sing the song. Note that this function applies only for 2-channel audio operation. Playing KaraOK 1.
VIA VT8237 Serial ATA RAID Introduction B-1 Appendix. Using 4- or 6-Channel Audio Function Appendix B: VIA VT8237 Serial A T A RAID Introduction The Southbridge VT8237 provides a hybrid solution that combines two independent SA T A ports for support of up to two Serial A T A (Serial A T A RAID) drives.
MS-6775 ATX Mainboard B-2 Introduction This section gives a brief introduction on the RAID-related background knowledge and a brief introduction on VIA SA T A RAID Host Controller . For users wishing to install their VIA SA T A RAID driver and RAID software, proceed to Driver and RAID Software Installation section.
VIA VT8237 Serial ATA RAID Introduction B-3 RAID 0 (Striping) RAID 0 reads and writes sectors of data interleaved between multiple drives. If any disk member fails, it affects the entire array. The disk array data capacity is equal to the number of drive members times the capacity of the smallest member.
MS-6775 ATX Mainboard B-4 BIOS Configuration When the system powers on during the POST (Power-On Self T est) process, press <T ab> key to enter the BIOS configuration. The Serial A T A RAID volume may be configured using the VIA T ech. RAID BIOS.
VIA VT8237 Serial ATA RAID Introduction B-5 Create Disk Array Use the up and down arrow keys to select the Create Array command and press <Enter>. MSI Reminds Y ou... The “Channel”, “Drive Name”, “Mode” and “Size (GB)” in the following example might be different from your system.
MS-6775 ATX Mainboard B-6 If user selects a RAID 0 array in step 2, the block size of the array can also be selected. Use the arrow key to highlight Block Size and press <Enter>, then select a block size from the popup menu. The block size can be 4KB to 64KB.
VIA VT8237 Serial ATA RAID Introduction B-7 Use the arrow key to highlight Start Create Process and press <Enter>. A warning message will appear, Press Y to finish the creation, or press N to cancel the creation. Important note: All existing content in the hard drive will be destroyed after array creation.
MS-6775 ATX Mainboard B-8 Delete Disk Array A RAID can be deleted after it has been created. T o delete a RAID, use the following steps: 1 . Select Delete Array in the main menu and press <Enter>. The channel column will be activated. 2 . Select the member of an array that is to be deleted and press <Enter>.
VIA VT8237 Serial ATA RAID Introduction B-9 Create and Delete Spare Hard Drive If a RAID 1 array is created and there are drives that do not belong to other arrays, the one that has a capacity which is equal to or greater than the array capacity can be selected as a spare drive for the RAID 1 array.
MS-6775 ATX Mainboard B-10 View Serial Number of Hard Drive Highlight Serial Number View and press <Enter>. Use arrow key to select a drive, the selected drive’ s serial number can be viewed in the last column. The serial number is assigned by the disk drive manufacturer.
VIA VT8237 Serial ATA RAID Introduction B-11 Duplicate Critical RAID 1 Array When booting up the system, BIOS will detect if the RAID 1 array has any inconsistencies between user data and backup data.
MS-6775 ATX Mainboard B-12 Rebuild Broken RAID 1 Array When booting up the system, BIOS will detect if any member disk drives of RAID has failed or is absent. If BIOS detects any disk drive failures or missing disk drives, the status of the array will be marked as broken.
VIA VT8237 Serial ATA RAID Introduction B-13 3. Choose Replacement Drive and Rebuild: This item enables users to select an already-connected hard drive to rebuild the broken array. After choosing a hard drive, the channel column will be activated. Highlight the target hard drive and press <Enter>, a warning message will appear.
MS-6775 ATX Mainboard B-14 Install Driver in Windows OS h New Windows OS (2000/XP/NT4) Installation The following details the installation of the drivers while installing W indows XP. 1. Start the installation: Boot from the CD-ROM. Press F6 when the message "Press F6 if you need to install third party SCSI or RAID driver" appears.
VIA VT8237 Serial ATA RAID Introduction B-15 Installation of VIA SA T A RAID Utility The VIA SA T A RAID Utility is the software package that enables high- performance RAID 0 arrays in the W indows* XP operating system.
MS-6775 ATX Mainboard B-16 The InstallShield Wizard will begin automatically for installation. Click on the Next button to proceed the installation in the welcoming window. Put a check mark in the check box to install the feature you want. Then click Next button to proceed the installation.
VIA VT8237 Serial ATA RAID Introduction B-17 Once the installation is complete, go to Start ---> Programs ---> VIA -- -> raid_tool.exe to enable VIA RAID T ool . After the software is finished installation, it will automatically started every time W indows is initiated.
MS-6775 ATX Mainboard B-18 The main interface is divided into two windows and the toolbar above contain the main functions. Click on these toolbar buttons to execute their specific functions. The left windowpane displays the controller and disk drives and the right windowpane displays the details of the controller or disk drives.
VIA VT8237 Serial ATA RAID Introduction B-19 Click on the plus (+) symbol next to Array 0---RAID 0 to see the details of each disk. Y ou may also use the same o r button to view the statuses of Array 0---RAID 1.
MS-6775 ATX Mainboard B-20 Click on the plus (+) symbol next to Array 0---RAID 1 to see the details of each disk..
Een belangrijk punt na aankoop van elk apparaat MSi MS-6775 (v1.x) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen MSi MS-6775 (v1.x) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens MSi MS-6775 (v1.x) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding MSi MS-6775 (v1.x) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over MSi MS-6775 (v1.x) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van MSi MS-6775 (v1.x) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de MSi MS-6775 (v1.x) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met MSi MS-6775 (v1.x) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
