Gebruiksaanwijzing /service van het product X600-096US van de fabrikant MSi
Ga naar pagina of 85
CHAPTER 1 Preface.
1-2 Preface Preface T able of Content ............................................................................................................... ............. 1-2 Regulations In format ion..........................................................
1-3 Preface Rear Si de View ................................................................................................................. ...... 2-19 Bottom Si de View ...............................................................................
1-4 Preface BIOS Setup About BIOS Setup ............................................................................................................... .......... 4-2 When to Use BIOS Setup .............................................................
1-5 Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested an d found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC rules. These lim its are designed to provide reasonable protection against harmful interference in a residential installa tion.
1-6 Preface Shield interface cables and AC power cord, if any , must be used in order to comply with the emission limits. FCC Conditions This device complies with p art 15 of the FCC Ru les. Operation is subject to the following two conditions: This device may not cause harmful interfere nce.
1-7 Preface Safety Instructions Read the safety instructions carefully and thoroughly . All cautions and warnings on the equipment or user ’s manual should be noted. Keep the User ’s Guid e that comes with the packa ge for future reference. Keep this equipment away from humidity and high temperature.
1-8 Preface Place the power cord in a way that people are unlikely to step on it. Do not place anything on top of the power cord. Always unplug the powe r cord before inserting any add-o n card or module. T o prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only .
1-9 Preface Safety Guideline for Using Lithium Battery (English) CAUTION: Danger of explosion if batte ry is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer . Discard used batteries according to manufacturer ’s instructions.
1-10 Preface üreticinin talimatlar ı na göre degerlendiriniz. (Greek) ( Ελληνικά ) ΠΡΟΣΟΧΗ : Κίνδυνος έκρηξ ης εάν η μπαταρία το ποθετηθεί λανθασμένα .
1-1 1 Preface 권장하는 것과 동일하거나 동등한 배터리로만 교 체하십시오 . 사용한 배터리는 제조업체의 지침에 따라 폐기하십시오 . (Vietnam) (Tieng V iet) L Ư U Ý: Thay th ế pin không t ươ ng thích có th ể d ẫ n đế n ngu y c ơ b ị n ổ .
1-12 Preface (Swedish) (Svenska) V ARNING: Explosionsfara vid felaktigt batterib yte . Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kasse ra använt batteri enligt fabrikantens instruction. (Finnish) (Suomi) V AROITUS: P aristo voi räjähtää, jos se on vi rheellisesti asennettu.
1-13 Preface (Estonia) (Eesti) ETTEV AA TUST! Plahvatusoht, kui aku on valesti paigaldatud. Asendage ainult sama või tootja poolt soovitatud võrdväärse akuga.
1-14 Preface (German) (Deutsch) Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entso rgt werden, die sich auf 13.
1-15 Preface (Greek) ( Ελληνικά ) Σύμφωνα με την Οδηγία 2002/96/ ΕΚ της Ευρωπ αϊκής Ένωσης (« ΕΕ ») περί Απόρριψης Ηλεκτρικού .
1-16 Preface 文规定「电机电子 设备产品」不可再以都市废弃物 处理，且所有相关电子设备制造 商，均须在产品使用寿命结束后 进行回 收。 (Japanese) ( 日.
1-17 Preface koja stupa na snagu od 13. Avgust a 2005, proizvodi koji spadaju pod "elektronsku i elektri č nu opremu" ne m ogu više biti odba č eni kao obi č an otpad i proizvo đ a č i ove opreme bi ć e prinu đ eni da uzmu natrag ove proizvode na kraju njihovog uobi č ajenog veka trajanja.
1-18 Preface alaisen sähkö- tai elektroniikkalaitt een valmistajan on otettava laitteet t akaisin niiden käyttöiän päättyessä. (Slovak) (Slovensky/ Sloven č ina) Na základe smernice Európskej únie („EU“) o elektrických a elektronických zariadeniach č íslo 2002/96/ES, ktorá vstúpila do platnosti 13.
1-19 Preface (Croatian) (Hrvats ki) U okviru Direktive Europske Un ije ("EU") o Otpadnim elektri č nim i elektroni č kim ure đ ajima, Direktiva 2002/96/EC, koja je na snazi od 13.
1-20 Preface Trademarks All trademarks are the properties of their respe ctive owners. Release History V ersion Revision Note Date 1.0 First Released 05, 2009.
CHAPTER 2 Introductions.
2-2 Introductions C ongratulations on be coming an user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a del ightful and professional experience in using notebook.
2-3 Introductions Chapter 4, BIOS Setup , provides information on BIOS Setup program and allows you to configure the system for optimum use. Unpacking First, unpack the ship ping carton and check all item s carefully . If any item cont ained is damag ed or missing, please cont act your local dealer immediat ely .
2-4 Introductions Specification Physical Characteristic Dimension 392 (W) x 255 (D) x 25 (H) mm Weight 2.0 kg CPU Processor T ype Intel ® Penryn UL V SFF Support Processor Intel ® Merom Core 2 Duo /.
2-5 Introductions Memory T echnology DDR2 677/ 800 MHz (optional) Memory DDR2 SO-DIMM X 2 slot 256/ 512/ 1024/ 2048 MB DDR2 SDRAM Maximum up to 4GB (2048MB DDR2 SO-DIMMM x 2) (optional) Power AC Adapter 65W , 19V Battery T ype 6 cells (optional) RTC Battery Y es I/O Port Monitor (VGA) 15 pin D-Sub x 1 USB x 2 (USB version 2.
2-6 Introductions Sto r a ge (Items listed here ma y vary depending on the model users purchased) HDD form factor 2.5”, 9.5mm High, 5400rpm Communication Port (Items listed here may vary without not.
2-7 Introductions Sof tware & BIOS USB Flash Boot Y es, USB floppy boot up DOS only BIOS Fast Boot Support --- Y es Others Kensington Lock Hole x 1 Compliance WH QL Upgrade and W arranty Please be.
2-8 Introductions Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearan ce of this notebook before usin g it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased.
2-9 Introductions 1. Webcam/ W ebcam LED (optional) This built-in Webcam can be used for pi cture taking, video recodi ng or conferencing, and any other interactive applications. W ebcam LED indicator , next to the webcam, grows orange when webcam fun ction is activated; LED goes out when this function is turned off.
2-10 Introductions Bluetooth Bluetooth(optional ) Bluetooth LED indi cator glows whit e when Bluetooth function i s enabled. W arning: For flight safety consideration, make sure this LED indicator goes out when you are in flight. Note: The Bluetooth Function may be optional supported depending on the model users purchased.
2-1 1 Introductions Battery S tatus Glowing white whe n the battery is being charged. Glowing amb er when the battery is in low battery status. Blinking amber if the battery fails and it is recommended to replace a ne w battery . Consult the local dealer for purchasing an e quivalent type of battery recommended by the manufacturer .
2-12 Introductions + Smart Pad Press and hold the Fn button, and then press the F3 button repeatedly to enable or disable the Smart Pad function recurrently .
2-13 Introductions + WLAN (WiFi) or WiMax (optional) Press and hold the Fn button, and then press the F8 button repeatedly to turn the Wireless LAN (WiFi) or WiMAX function on or off recurrently . + Bluetooth (optional) Press and hold the Fn button, and then press the F9 button to turn the Bluetooth function on.
2-14 Introductions Front Side V iew 1. Stereo Spea kers Give high quality sound blaster with ste reo system and Hi-Fi function supported . 1. S tereo S peakers 1 1.
2-15 Introductions Right Side V iew 1. V entilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function suppo rted.
2-16 Introductions 3. Power Connector T o connect the AC adapter and supply power for the notebook. 4. Card Reader The built-in card reader m ay support various types of memory card, such as MMC (Mult.
2-17 Introductions Lef t Side V iew 1. RJ-45 Connector The 10/100/1000 Ethernet connector is use d to connect a LAN cable for network connection. 2. E-SA T A Connector (External Seri al A T A) / USB Port (optional) The E-SA T A Connector allows you to connect an external Serial A T A hard disk device.
2-18 Introductions 4. HDMI Connector HDMI (High Definition Multimedia Interface Suppo rt) is a new interface st andard for PCs, displays and consumer electronics devices that supports st andard, enhanced and high-definition video, plus multi-chan nel digit al audio on a single cable.
2-19 Introductions Rear Side V iew 1. Battery Pack This notebook will be powered by the battery p ack when the AC adapter is disconnected. 1. Battery Pack 1.
2-20 Introductions Bottom Side V iew 1. Battery Pack This notebook will be powered by the battery p ack when the AC adapter is disconnected. 2. Battery Lock/Unlock Button Battery cannot be moved when the butt on is positioned on lock st atus. Once the button is slid to unlock position, the battery is removable.
CHAPTER 3 Getting S t arted.
3-2 Getting Started Power Management ECO Engine -- Power Saving Function ECO Engine , the outst anding and unique power savi ng function, provides 5 different po wer saving modes – Gaming mode , Mo .
3-3 Getting Started Present ation Mode Select this mode while performing present ation applications. Office Mode Select this mode while dealing with of fice document ation tasks. T urbo Battery Mode Select this mode to maximize the battery running time.
3-4 Getting Started AC Adapter Please be noted that it is strongly recom mended to connect the AC adapter and use the AC power while using this notebook for the first time.
3-5 Getting Started Connecting the AC Power 1. Unpack the p ackage to find the AC adapter and power cord. 2. Attach the power cord to the con nector of the AC adapter . 3. Plug the DC end of the adapter to the notebook, and the male end of the power co rd to the electrical outlet.
3-6 Getting Started Battery Pack This notebook is equipped with a high-cap acity Li-ion battery pack. The rech argeable Li-ion battery pack is an int ernal power source of the notebook. Be aware of that this battery pack m ay be dama ged if users try to disa ssemble the battery pack on their own.
3-7 Getting Started Releasing the Battery Pack T o remove the battery pack, following the steps below: 1. Make sure the notebook is turned of f, and the AC power is disconnected. 2. Press the lock/unlock butt on to the unlocked position. 3. Locate the battery release button on the bottom side.
3-8 Getting Started Replacing the Battery Pack T o insert the battery pack, followin g the steps below: 1. Align the front edge of the battery pack to the location with “open” mark shown aside the battery tray 2. Place the battery pack into the battery tray vertically with correct orient ation.
3-9 Getting Started Using the Battery Pack Battery Safety Tip s Replacing or handli ng the battery incorrectly may present a risk of fire or explosion, which could cause serious injury . Only replace the main battery pa ck with the same or equivalent type of battery .
3-10 Getting Started Charging the Battery Pack The battery pack can be re charged while it is in stalled in the notebook. Please pay attention to the following tips before re charging the battery: If a charged battery pack i s not available, save your work and close all running progra ms and shut down the system or Save-to-Disk.
3-1 1 Getting Started Basic Operations If you are a beginner to the notebook, please read t he following instru ctions to assure your own safety , and make yourself comfort able during the operations. Safety and Comfort Tips The notebook is a port able platform that allows you to work any where.
3-12 Getting Started 1. Keep your hands and feet with optimal comfort. 2. Adjust the angle and position of LCD pane l. 3. Adjust the desk’s hei ght. 4.
3-13 Getting Started Knowing the Keyboard This notebook provides a full-function ed keyboar d. This keyboard can be divided into fou r categor ies: T ypewriter keys , Cursor keys , Numeric key s and Function keys . The keyboard shown h ere may vary from the actual one, depending on whic h county users purchase the notebook.
3-14 Getting Started Ty p e w r i t e r K e y s In addition to providing the major fu nction of the ke yboard, these typewrite keys also provide several keys for speci al purposes, su ch as [ Ctrl ,] [ Alt ,] and [ Esc ] key .
3-15 Getting Started Cursor Keys The four cursor (arrow) keys and [ Home ], [ PgUp ], [ PgDn ], [ End ] keys are used to control the cursor movement. Move the cursor lef t for one space. Move to the previous page. Move the cursor right for one space. Move to the next page.
3-16 Getting Started Function Keys Windows Keys Y ou can find the Windows Logo key ( ) and one Application Logo key ( ) on the keyboard, which are used to perform Windows-specific functi ons, such as opening the S tart menu and launching the shortcut menu.
3-17 Getting Started Quick Launch [Fn] Butto ns Use the quick launch [Fn] buttons on the keyboard to activate the specific applications o r tools. With the help of these buttons, users w ill be able to do work more efficiently .
3-18 Getting Started + WLAN (WiFi) or WiMax (optional) Press and hold the Fn button, and then press the F8 button repeatedly to turn the Wireless LAN (WiFi) or WiMAX function on or off recurrently . + Bluetooth (optional) Press and hold the Fn button, and then press the F9 button to turn the Bluetooth function on.
3-19 Getting Started Knowing the Smart Pad The Smart Pad integrated in your notebook all ows us ers to perform various actions with multi-finge r tap s and gestures while operating the notebook, and is cap able to detect the changes of the multi-finger movement perf ormed by users precisely .
3-20 Getting Started Gestures Actions Functions T apping the touchp ad once with one finger . Single clicking the Lef t button of the mouse. Double tappi ng the touchpad with one finger . Double clicking the Lef t button of the mouse. T ouch the touchpad with single finger and move around your finger on the touchp ad.
3-21 Getting Started Gestures Actions Functions T ouch the touchpad with two fingers and remain the fingers on the touchpad. Move the two fingers on the touchpad vertically . Scrolling a pa ge vertically . T ouch the touchpad with two fingers and remain both fingers on the touchpad.
3-22 Getting Started Gestures Actions Functions T ouch the touchpad with three fingers and remain it on the touchpad. Double tappi ng the touchpad with one finger to enable the Magnifying Glass function. T o control the magnifying glass, touch the touchpad with single finger and move around your finger on the touchp ad.
3-23 Getting Started Gestures Actions Functions T ouch the touchpad with three fingers and remain the fingers on the touchpad. Move the three fingers to the upper side of the touchp ad to browse “Computer .” Browse the directory of “Computer” T ouch the touchpad with three fingers and remain the fingers on the touchpad.
3-24 Getting Started Gestures Actions Functions T ouch the touchpad with two fingers and remain both fingers on the touchpad. Move a finger clockwise while another remains still to rot ate a selected object clockwise. Refer to the first gesture.
3-25 Getting Started About Hard Disk Drive Y our notebook is equipped with a 2.5-inch hard di sk drive. The hard disk drive is a storage device with much higher sp eed and larger capa city than ot her storage devices, such a s the floppy disk drive and optical storage device.
3-26 Getting Started Connecting the External Devices The I/O (input/output) port s on the notebook allow y ou to connect peripheral devices. All devices listed here are for referen ce only .
3-27 Getting Started DVD Combo Driv e: This device allows you to read DVD and CD, and record CD format. DVD Dual Driv e: In addition to read DVD and CD, this devic e allows you to record CD format and both the –R/R W and +R/RW DV D formats. Super Multi: Wo rks as a multi-functional DV D Dual Drive and a DVD RAM Drive.
3-28 Getting Started Connecting the Peripheral Devices Connecting the USB devices This notebook provides USB port s for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, p rinter , and external optical storage devi ce, ete.
3-29 Getting Started Connecting the External Display Devices This notebook provides a VGA port for conne cting a larger display with higher re solution. The 15-pin-D-sub VGA port allows users to conne ct an external monitor or other standa rd VGA-compatible device (such as a proj ector) for a great view of the notebook display .
3-30 Getting Started T o connect the external display , make sure t he notebook and the external display are both powered off, and then con nect the display to the notebook. Once the display is conne cted to the notebook, power on the noteboo k and the external display should respond by defaul t.
3-31 Getting Started Connecting the External SA T A Hard Disk device The E-SA T A Connector allows you to connect an external Serial A T A hard disk device. Users can now utilize shielded cable outside the notebook to take advant age of the benefits the SA T A interface brings to storage.
3-32 Getting Started Connecting the Communication Devices Using the LAN The RJ-45 connector of the noteb ook allows you to connect the LAN (lo cal area network) devices, such as a hub, switch and gateway , to build a network connection.
3-33 Getting Started Safely Remove Hardware When any peripheral device is connecte d to the notebook, the Safely Remove Hardware icon will appear on the t askbar . Double-click the icon to bring up the Safely Remove Hard ware dialog box. Y ou can see all connected peripheral devices he re.
CHAPTER 4 BIOS Setup.
4-2 BIOS Setup About BIOS Setup When to Use BIOS Setup? Y ou may need to run the BIOS Setup when: An error message appears on the scree n during the system booting up and is requested to run SETUP . Y ou want to change the default settings for customized feature s.
4-3 BIOS Setup Control Keys Y ou can use only the keyboard to control the cursor in the BIOS Setup Utility . Press left arro w to select one menu title. Press right arrow to select one menu title. Press up arrow to select one item under the menu title.
4-4 BIOS Setup BIOS Setup Menu Once you enter the BIOS Setup Utility , the Main M enu will appear on the screen. Select the t ags to enter the other menus. Main Menu Show system overview information about BIOS version, CPU features, memory size and setting of system time and date.
4-5 BIOS Setup Main Menu System Date This item allows you to set the system date. The date format is [day:month:date:year]. Day (T ranslation) Day of the week, from Sun to Sat, whi ch is determined by BIOS (read-only). Month (Month) The month from 01 (January) to 12 (December).
4-6 BIOS Setup System Information This item provides the informatio n about the firmware, processo r , and system memo ry ..
4-7 BIOS Setup Advanced Menu Intel(R) S pee dStep(tm) te ch. This item allows you to enabl e or disable Intel S peedS tep technology . When set to Disabled , the system always op erates in a conserve power mode (the proces sor works at FSB400 -600MHz or FSB533-800MHz).
4-8 BIOS Setup AHCI (Advanced Host Co ntroller Inter face) Use this item to enable or di sable the AHCI Mode. Setting options: Disabled and Enabled .
4-9 BIOS Setup Security menu Change Supervisor Password When this item is selected, a message box shall ap pear on the screen as below: T ype a maximum of eight-digit password and press [Enter] . The password typed no w will replace any pr eviously set password from CMOS memory .
4-10 BIOS Setup The Pass w ord Check item is used to specify the type of BIOS password protection that is implemented. Settings are described below: Setup The password is require d only when users try to access to BIOS SETUP UTILITY .
4-1 1 BIOS Setup Boot menu Boot Settings Configurat ion Configure settings during system boot. Boot Device Priority These items showing the sequence of boot devices where BIOS attempts to load the disk operating system. Boot S ettings Confi guration Main Advanced Security Boot Exit Enter: +/-: F1: F2: F9: F4: Select Change Opt.
4-12 BIOS Setup Exit menu Exit & Save Changes Save the changes you have made and e xit the utility . Exit & Discard Changes and Exit the utility without saving the changes you have made. Discard Changes Abandon your changes and rel oad the previous configuration before running the utility .
Een belangrijk punt na aankoop van elk apparaat MSi X600-096US (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen MSi X600-096US heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens MSi X600-096US vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding MSi X600-096US leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over MSi X600-096US krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van MSi X600-096US bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de MSi X600-096US kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met MSi X600-096US . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
