Gebruiksaanwijzing /service van het product iScan Air Go van de fabrikant Mustek
Ga naar pagina of 21
For smartphones, tablets, and computers Wireless Handy Scanner All trademarks are the property of their respective owners and all rights are acknowledged. Images and screenshots used in this User Guide may vary according to the devices used and its operating system.
2 Safety and Precautions Discarded electrical and electronic appliances are recyclable and should separate from the household waste. Please actively support in conserving resources and protecting the environment by returning this appliance to the collection centers (if available).
3 Safety and Precautions ...................................................................................................... 2 Contents ................................................................................................................
4 Supported Devices The Scanner is compatible with following devices in the WiFi mode: iPad Air , iPad (4th generation), iPad (3rd generation), iPad 2, iPad, iPad mini with iOS 5.0 or later . iPhone 5S/5C, iPhone 5, iPhone 4S, iPhone 4, iPod touch with iOS 5.
5 Unpack Make sure following items are included. Scanner USB Cable (See p.15) Calibration Sheet (See p.17) AAA battery x 4 (See p.8) Cleaning Cloth (See p.
6 Scanner Parts POWER/SCAN Button MicroSD Card Slot Mini USB Port Battery Cover SQ/HQ Switch WiFi/MicroSD Switch Guide Scanning LED WiFi LED Power LED Guide Rollers Scanning Lens.
7 LED Messages Symbol LED Light Message Power LED Solid green The power is turned on. Blinking green The battery is low. Solid red Memory is full or unknown error happen. (Note: The scanner will hang, Free up some memory and restart the scanner to solve the problem.
8 Insert AAA Batteries 1. Push and slide the battery cover away to detach it from the base. 2. Place 4 alkaline batteries according to the polarity indicators inside the compartment. 3. Slide back the battery cover to close it. 4. Press and hold the / SCAN button for 3 seconds to turn on or off the scanner .
9 Set the Resolution Locate the SQ/HQ switch on the side of the Scanner . Slide the switch to “SQ” (Standard Quality) or “HQ” (High Quality) for scanning resolution. • Scanning at “HQ” mode will take a longer time to scan the image, and produce a larger files.
10 Set the Scanner Mode Locate the WiFi/MicroSD switch on the side of the Scanner . Slide the switch to “WiFi” or “MicroSD” for setting the scanner mode. In the WiFi mode, you can scan images directly to a supported device using direct WiFi connection.
11 Install the iScanAir Go app (WiFi Mode) The Scanner includes free iScanAir Go apps to scan images directly to your devices. Y ou need to install iScanAir Go from Internet to your device before use. • Ensure that your device has Internet access via your service provider or wireless connection.
12 Connect to Wireless Network (WiFi Mode) Y ou can make a direct wireless connection between the Scanner and your device in following steps. 1. Press and hold the /SCAN button for 3 seconds until the power LED emits green light. * Wait about 20 seconds until the LED blinks blue light.
13 Scan, Save, and Share (WiFi Mode) • Ensure the Scanner is switched to the “ WiFi ” mode on the side of the Scanner , and is connected to your device prior to use. (See p.10) • Make sure your device is supported. (See p.4) NOTES Scan 1.
14 Scan, Save, and Share (WiFi Mode) (cont'd) Save Press Save to save the image to your device’ s photo folder . * For Mac, save the image with a chosen file name, directory, and file format ( JPG or PDF ). * Press Cancel to exit without save or to re-scan.
15 Use as the Standalone Scanner (MicroSD Mode) • Ensure the Scanner is switched to the “ MicroSD ” mode on the side of the Scanner . (See p.10) NOTES 1.
16 Dirt and residues can build up on the Scanner’ s rollers and lens which can affect image quality . Clean Scanner’ s lens and rollers periodically to get the best result. Clean Lens and Rollers • Make sure the Cl ea ni ng C lo th i s cl e an b ef or e us e.
17 Calibrate • Always clean the Scanner’ s rollers and lens first before calibration. If cleaning rollers and lens did not improve image quality , then please per form calibration procedures. • If necessary , perform calibration few times until the image quality is improved.
18 Calibrate (cont'd) Calibrate in the MicroSD Mode 1. Slide the WiFi/Micro SD switch to “ MicroSD ”. 2. Press and hold the /SCAN button for 10 seconds until the WiFi LED blinks a purple light. 3. Remove the plastic foil on the Calibration Sheet, place it on the table with the white side facing up.
19 Helpful Hints Scanner does not turn on • Press and hold the /SCAN button 3 seconds to turn on. • Check if the Scanner’ s batter y has drained and no power is available. Scanner cannot connect to your device • T ry moving the Scanner closer to your device.
20 Scanner hangs with red power LED • Free up some memory and restart the scanner . On the Apple device, a message ‘iScanAir Go Would Like to Access Y our Photos’ appears after pressing SA VE button • This is a privacy settings requested by your device.
21 Specifications Scanner T ype A4 color handheld scanner Image Sensor Color CIS (Contact Image Sensor) Light Source LED (RGB) Scan Size (Max.) W 216mm x L 356 mm (W 8.
Een belangrijk punt na aankoop van elk apparaat Mustek iScan Air Go (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mustek iScan Air Go heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mustek iScan Air Go vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mustek iScan Air Go leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mustek iScan Air Go krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mustek iScan Air Go bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mustek iScan Air Go kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mustek iScan Air Go . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
