Gebruiksaanwijzing /service van het product VJ-1604 van de fabrikant Mutoh
Ga naar pagina of 141
U s e r ’ s G u i d e V a l u e J e t V J- 1 60 4 E co -S o lv e n t U lt ra P r in te r F OR E UR OP E O N LY ! For Maintenance Ki ts, Spares, Service and Suppo rt Call: +44 (0) 1628 588755 E-mail: support@co lourgen.
Users Guide Va lueJet 1604 2 AP-75760 Re v 1.1 -21/06/20 07, This page is left blank intentionall y.
Users Guide Va lueJet 1604 3 AP-75760 Re v 1.1 -21/06/20 07, COPYRI GHT NOTICE COPYRIG HT © 2007 Mutoh E urope N.V. All rig hts reserved. This document ma y not be reprod uced by any means, in whole or in par t, without writte n permission of the copyright owne r.
Users Guide Va lueJet 1604 4 AP-75760 Re v 1.1 -21/06/20 07, IMPORT ANT N OTICE For user s in Europe This is a Class A produ ct approved fo r industrial environ ments. In a domestic e nvironment this produc t may cause radio interference in which case you may be required to take adequate me asures.
Users Guide Va lueJet 1604 5 AP-75760 Re v 1.1 -21/06/20 07, ABOU T THIS G UIDE Purpos e and Ta rget Re aders Thank you fo r purchasing this p rinting product. We are so g rateful to you! This guide explai ns preparatio ns before use and o perat ion pr ocedures for MUTOHs Full Colour Inkje t printer VJ-1604 se ries.
Users Guide Va lueJet 1604 6 AP-75760 Re v 1.1 -21/06/20 07, This page is left blank intentionall y.
Users Guide Va lueJet 1604 7 AP-75760 Re v 1.1 -21/06/20 07, TABLE OF CONTEN TS 1 REGULARISATION AND SAFETY INFORMATION. ............ ........... ............ ............ ..... 9 1.1 C OMPLY WITH FOLLOWI NG REGULATIONS ........... ............
Users Guide Va lueJet 1604 8 AP-75760 Re v 1.1 -21/06/20 07, This page is left blank intentionall y.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 9 AP-75760 Re v 1.1 -21/06/20 07, 1 REGULARISATION AND SAFETY INFORMATION 1.1 C OMPLY WITH FOLLOWI NG REGULATIONS ........... ............ ............ ............ ............ .......
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 10 AP-75760 Re v 1.1 -21/06/20 07, 1.1 COMPLY WITH FO LLOWING REGUL ATIONS The CE marking is a mandatory European marking for certain p roduct g roups to indicate conformity with the essential h ealth and safety r equirements set ou t in European Direc tives.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 11 AP-75760 Re v 1.1 -21/06/20 07, 1.3 IMPORTANT SAF ETY INSTRUCTIONS Symbol Meaning I n d i c a t e s pr oh i b i t e d ope r a t i ons . I n d i c a t e sr e qui r e d ope r a t i ons .
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 12 AP-75760 Re v 1.1 -21/06/20 07, Caution Pay attention to the following points, while handling the power cables. Do not do anything forcefully on the power cables. Do not keep heavy objects on the power cables.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 13 AP-75760 Re v 1.1 -21/06/20 07, Follow the instructions below when handling the power plugs. Otherwise, fire may occur. Wipe away dust and any other residue before inserting the plugs.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 14 AP-75760 Re v 1.1 -21/06/20 07, 1.4 WARNING LA BELS Be sure to read and understand the safety warnings before handling the printer. A warning la bel is used on parts of the printer whic h especially n eeds your atte ntion.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 15 AP-75760 Re v 1.1 -21/06/20 07, No. Types of warning labels 1 2 3 4.
Users Guide Va lueJet 1604 Chapter 1: Saf ety Instructions 16 AP-75760 Re v 1.1 -21/06/20 07, 5 6 7 8 9.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 17 AP-75760 Re v 1.1 -21/06/20 07, 2 PRODUCT OVERVIEW 2.1 F EATURES 18 2.2 N AME OF THE PARTS AN D FUNCTIONS 19 2.2.1 Front section 19 2.2.2 Rear section 20 2.2.3 Operation panel 21 2.3 P RINTER MODE 24 2.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 18 AP-75760 Re v 1.1 -21/06/20 07, 2.1 FEATURES (1) High -speed output The new type p rint head achiev es high-speed outpu t.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 19 AP-75760 Re v 1.1 -21/06/20 07, 2.2 NAME OF TH E PARTS AND F UNCTIONS Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 20 AP-75760 Re v 1.1 -21/06/20 07, 2.2.2 Re ar sect ion î ì ï ë ê é ï í No. Name Function 1 Roll med ia holders Used to loa d the roll media. Include flanges wh ere roll media is a ttached, and the levers th at fix the roll media holde rs.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 21 AP-75760 Re v 1.1 -21/06/20 07, 2.2.3 Operation pane l Notes Refer to the foll owing for detail s regarding the operation met hod of the operation panel .
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 22 AP-75760 Re v 1.1 -21/06/20 07, (1) Operation keys in t he Normal mo de No. Key Norm al Setup me nu disp lay 1 [Menu] key Changes to Setup m enu Shifts from Setup menu d isplay to Normal.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 23 AP-75760 Re v 1.1 -21/06/20 07, (2) Displa y section. No. Name Colour S tatus Descrip tion Lamp ON Po wer ON Lamp blinks An error has occur red. Error cont ent is displayed o n the LCD 9 Power lamp green Lamp OFF Power OFF Lamp ON Analyzin g received data.
Users Guide Va lueJet 1604 Chapter 2: Prod uct overview 24 AP-75760 Re v 1.1 -21/06/20 07, 2.3 PRINTER M ODE 2.3.1 Norm al m ode Be sure to read and understand the safety warnings before handling the printer. The printer is read y to print. The med ia has been loaded an d the media type ha s been set.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 25 AP-75760 Re v 1.1 -21/06/20 07, 3 INSTALLING THE UNIT 3.1 I NSTALLATION PROCEDURE 26 3.2 I NSTALLATION ENVIRONME NT 27 3.2.1 Environmental conditions for installation 27 3.2.2 Installation space 28 3.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 26 AP-75760 Re v 1.1 -21/06/20 07, 3.1 INSTALLAT ION PROCEDU RE I ns t a l l a t i on p r oc e d ur e w h e n us i ng t h e n e t w or k c onne c t i on Starting point: ASSEMBLED VALUEJET Step Ac tion Reference 1 Connect the p ower cables.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 27 AP-75760 Re v 1.1 -21/06/20 07, 3.2 INSTALLATION ENVIRONMENT Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 28 AP-75760 Re v 1.1 -21/06/20 07, 3.2.2 Ins tallation space Install the p rinter on a levelled fl oor which ha s enough strength to su pport the weigh t of the entire m achine. Notes For the we ight of the print er and the stand, ple ase refer to the Ope ration Manual .
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 29 AP-75760 Re v 1.1 -21/06/20 07, 3.3 POWER CABL ES CONNECTION S Notes When the p ower supply of the p rinter is ON, do not pull out t he power cables from t he socket.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 30 AP-75760 Re v 1.1 -21/06/20 07, 3.4 SWITCHING TH E POWER ON / OFF 3.4.1 Switchin g the power ON Step 1 : Press the [Power] key on th e operation panel to swi tch ON the printer. The Powe r indication light on the operation pane l lights green.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 31 AP-75760 Re v 1.1 -21/06/20 07, 3.4.2 S witching the pow er OFF Be sure to read and understand the safety warnings before handling the printer. Step 1 : Before powering OFF, be sur e that: Printing or o ther operations are stop ped or finished.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 32 AP-75760 Re v 1.1 -21/06/20 07, 3.5 INSTALLING INK C ASSETTES FO R THE FIRST TIME Notes When fillin g ink in the mach ine, use the in k cassette of origina l product manufac turer. This printe r has been adjuste d for use of genuin e ink cassettes.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 33 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Install the cleani ng cassette into the ink c assette slot. o Keep the mark facing up an d insert the cleanin g cassette into the slot of the printer.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 34 AP-75760 Re v 1.1 -21/06/20 07, Result: The o peration panel displa ys "Ink Refill ** %", and the ini tial ink replenishmen t starts. The ink replenis hment takes about fi ve minutes.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 35 AP-75760 Re v 1.1 -21/06/20 07, 3.5.1 Re placing ink Cas settes (1) Replace ment time When [**** ] InkNearEnd is di splayed on the op er ation panel the alarm buzzer s ounds continuously .
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 36 AP-75760 Re v 1.1 -21/06/20 07, (3) Repla cement steps Notes Do not shake i nk cassettes. D oing so may caus e ink leakage. Do not d isassemble the ink cass ette. A disassem bled ink cassette c annot be used.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 37 AP-75760 Re v 1.1 -21/06/20 07, 3.6 CONNECTIN G THE PRINTER TO T HE PC 3.6.1 S ystem requirem ents For details a bout the system r equirements, please refe r to the docum entation of the RIP software o f your choice.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 38 AP-75760 Re v 1.1 -21/06/20 07, 3.7 DISPOSAL OF WAST E FLUIDS. Be sure to read and understand the safety warnings before handling the printer. (1) Disposal period. Dispose the waste fluids in the f ollowing cases.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 39 AP-75760 Re v 1.1 -21/06/20 07, 3.8 TRANSFER AN D TRANSPO RTATION 3.8.1 Tra nsferr ing th e printer When using the dedicated stan d, transfer the pri nter according to the procedure below .
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 40 AP-75760 Re v 1.1 -21/06/20 07, (2) Steps after transfer Step 1 : Choose a suitable place to ins tall the printer. Refer to In stallation guide Step 2 : Verify that the butterfly bo lts fixing the s tand with the print er are well fixed.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 41 AP-75760 Re v 1.1 -21/06/20 07, 3.8.2 Tra nsporting the pri nter Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 3 : Ins talling the Unit 42 AP-75760 Re v 1.1 -21/06/20 07, This page is intention ally left blank..
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 43 AP-75760 Re v 1.1 -21/06/20 07, 4 HANDLING THE PRINTER 4.1 M AKING THE PRINT ER READY - TO - PRINT 45 4.2 G ENERAL INFO ON USA BLE MEDIA 46 4.2.1 Media compatibility 46 4.2.2 Printing area 46 4.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 44 AP-75760 Re v 1.1 -21/06/20 07, 4.7.2.3 I² availability 90 4.7.3 Flushing menu 90 4.7.3.1 Flushing return count menu 91 4.7.4 Side Margin menu 91 4.7.5 Media Initial menu 91 4.7.6 Media Width menu 92 4.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 45 AP-75760 Re v 1.1 -21/06/20 07, 4.1 MAKING THE PR INTER READY- TO-PRINT Starting point: FULLY- INSTALLED VALUEJET Step Action Reference 1 Choose the app ropriate media. General info on u sable media 2 Install an d load the media.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 46 AP-75760 Re v 1.1 -21/06/20 07, 4.2 GENERAL INF O ON USABLE MEDIA 4.2.1 Me dia co mpatibility Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 47 AP-75760 Re v 1.1 -21/06/20 07, 4.2.3 Not es on handling medi a Notes Use compa tible media under an a ppropriate envi ronment. The appropriat e temperatur e and humidity r anges for prin ting are shown belo w.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 48 AP-75760 Re v 1.1 -21/06/20 07, 4.3 HANDLING AND INS TALLING ME DIA Notes Refer to G eneral info o n usable media for d etails on media h andling. It is recommend ed to use tested and compatible media for this printer.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 49 AP-75760 Re v 1.1 -21/06/20 07, Step 1 : Loosen the fixing levers on the righ t and left side of the rear. Set the dis tance between the roll media holder s wider than the roll media widt h.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 50 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Set the roll med ia to the roll medi a holder (left) ï î No. Name 1 Roll me dia holder (left) 2 R oll media Step 4 : Set the roll med ia to the roll medi a holder (right) and fix the fixi ng lever.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 51 AP-75760 Re v 1.1 -21/06/20 07, Step 5 : Loosen the f ixing levers of the right and l eft roll med ia holders, move the ro ll media to the cen tre and tighten the levers. Notes Fix the r oll media holders by pre ssing the holder s to the printer.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 52 AP-75760 Re v 1.1 -21/06/20 07, 4.3.2 Set ting roll media Notes There are two opt ional winding system s available for the ValueJ.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 53 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Open the front cover. ï No. Name 1 Front Cover Step 4 : Set the roll med ia to the med ia feed slot. Notes If the end o f the roll media is no t wound tightly, w ind it tightly again, a nd than load it.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 54 AP-75760 Re v 1.1 -21/06/20 07, Step 5 : Pull the roll m edia out about 1m fro m the front medi a feed slot which is loc ated inside of t he front cover.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 55 AP-75760 Re v 1.1 -21/06/20 07, ë ³ ³ ë ³ ³ ë ³ ³ ë ³ ³ î ï î ï î ï No.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 56 AP-75760 Re v 1.1 -21/06/20 07, Step 8 : Lower the media loading lever No. Name 1 Media loading leve r Notes When load ing the new roll media, cut the front edg e of th e media if it is not st raight.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 57 AP-75760 Re v 1.1 -21/06/20 07, Step 10 : Press the [+] key or th e [-] key to select the type of the lo aded media. Step 11 : Press the [ENTER] k ey on the oper ation panel The med ia type is set.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 58 AP-75760 Re v 1.1 -21/06/20 07, 4.3.3 Set ting media type Introdu ction: Be sure to read and understand the safety warnings before handling the printer. When you have loaded the media in the ValueJet, y ou will have to set the media type.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 59 AP-75760 Re v 1.1 -21/06/20 07, Step 2 : Press the [Setti ng value +] key or [Setting valu e-] key on the operation pa nel to select the cor rect media type. Step 3 : Press the [Enter] k ey on the oper ation panel to confirm you r choice.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 60 AP-75760 Re v 1.1 -21/06/20 07, 4.3.4 He ad heigh t adjust ment When used ? Use the head hei ght adjustment fea ture when printing at high speeds or when usi ng strongly cu rved media.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 61 AP-75760 Re v 1.1 -21/06/20 07, 4.3.5 S tep adjust ment After every pri nted swath, th e media is fed a c ertain distance. Depend ing on the kind o f media (weight, backing) anoth er media feed com pensation has to be s et.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 62 AP-75760 Re v 1.1 -21/06/20 07, Step 7 : Perform the initial adjust print. Press the [Enter] k ey on the oper ation panel. o The operati on panel displays "Feed Len gth: 250 mm".
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 63 AP-75760 Re v 1.1 -21/06/20 07, Step 10 : Per form the Confirm P rint. Press the [+] key or [] ke y to select "PF3: Confirm Print". Press the [Enter] k ey on the operation pan el.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 64 AP-75760 Re v 1.1 -21/06/20 07, Step 12 : Per form Micro adjust ment printing . Display the M edia feed comp ensation menu on the o peration panel. Press the [+] key or [] ke y to select "PF4 : Micro Adj.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 65 AP-75760 Re v 1.1 -21/06/20 07, 4.3.6 Re placing roll medi a (1) Replaceme nt time Be sure to read and understand the safety warnings before handling the printer. Replace rol l media if .
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 66 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Turn the flanges of the r oll media holders a nd wind roll media ï ï î Step 4 : Loosen the lever of the right ro ll media holde r and remove the medi a í ï ï î Nr.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 67 AP-75760 Re v 1.1 -21/06/20 07, Step 5 : Take the same procedure as in step 4, remov e the roll media from the left roll media hol der.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 68 AP-75760 Re v 1.1 -21/06/20 07, 4.4 TEST PRIN T 4.4.1 Ove rview and func tions of th e test prints Testplot Function Action to be pe rformed when needed Nozzle Check To check the he ad nozzles.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 69 AP-75760 Re v 1.1 -21/06/20 07, Step 5 : Press the [>] key on t he operation pa nel Result: The operati on panel displays T est1: Nozzle Chec k.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 70 AP-75760 Re v 1.1 -21/06/20 07, 4.4.3 Nozz le ch eck Used to chec k whether ther e are any head c logging, missing noz zles or misfiring noz zles. Notes If the n ozzle check result ind icates that th e checked points are b lurred or missing, clea n the head.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 71 AP-75760 Re v 1.1 -21/06/20 07, 4.4.5 Set up print Checks the curren t settings of th e printer. Notes User med ia and print mode lists a re printed only when "AL L Set List" is sel ected.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 72 AP-75760 Re v 1.1 -21/06/20 07, 4.4.6 P alette print Used to co mpare pen colours used on the compu ter to the printi ng colours. Notes When B anner 1 or Banner 2 is set in the Prin t Mode menu, PalettePrint is not d isplayed on the Test Print men u.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 73 AP-75760 Re v 1.1 -21/06/20 07, 4.5 ADJUST PR INT Notes This printe r has been adjuste d for optimum print quality before sh ipment at the M utoh factory.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 74 AP-75760 Re v 1.1 -21/06/20 07, Step 6 : Press the [+] or [] key on the o peration panel to s elect the media type to u se. Step 7 : Press the [Enter] ke y on the operation pa nel.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 75 AP-75760 Re v 1.1 -21/06/20 07, Step 9 : Press the [+] or [] key on the o peration panel to select "Adj .4: Bi-D Quality". Step 10 : Press the [C ANCEL] key on the operation pa nel several times.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 76 AP-75760 Re v 1.1 -21/06/20 07, Step 12 : Press the [ >] key on the operation panel. Adj 1 C onfirm is displayed on t he operation pa nel. The displ ay enters the adjustp rint menu.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 77 AP-75760 Re v 1.1 -21/06/20 07, Step 14 : Check that the c onfirmation patte rn printing resul t is as follows .
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 78 AP-75760 Re v 1.1 -21/06/20 07, Start "Bi-D Q uality" pattern pr inting. Check the BI- D Quality p attern printing and select th e number corresponding to the lines tha t are most closely aligned.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 79 AP-75760 Re v 1.1 -21/06/20 07, 4.6 MENU SETUP O N THE OPERA TION PANEL. 4.6.1 Menu setup procedure Be sure to read and understand the safety warnings before handling the printer. Step 1 : Confirm th at the operation pane l is in the Normal mod e.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 80 AP-75760 Re v 1.1 -21/06/20 07, Step 6 : The sett ing in the blinking p art on the LCD mon itor of the operat ion panel can be ch anged. Press the [+] key or the [ -] key to change the settin g.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 81 AP-75760 Re v 1.1 -21/06/20 07, 4.6.2 Pane l set up men u overv iew. The followin g items can be found in the Panel set up menu. Setup item Description Setup men u Va rious settings of t he printer are conf igured.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 82 AP-75760 Re v 1.1 -21/06/20 07, 4.7 PANEL SET UP MENU In the table below you will fin d the complete m enu structure and it s function: Setup item Description Set1: Medi aType Set up the m edia type for pr inting.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 83 AP-75760 Re v 1.1 -21/06/20 07, 4.7.1 Me diaTyp e menu Setup item Settin g Value Description Type 1 Type 2 ... Type 29 Media Type 30 Set up the m edia type for pr inting. It is possible to se t 30 different u ser settings as "Type 1-30" for printing.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 84 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 1 . 2 P r i nt M od e m e nu Set up the p rinting mode accor ding to the used pr int data or print spee d. Resolution print mode Head Media Print Passe s Dir Drop Family/ Drop Size (2) Head Speed (3) Max.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 85 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 1 . 4 I ni t . A d j . P r i nt m e n u Setup Item Setting Value Description 100 mm to <250 mm> to 500 mm Change the length (feed length) of the media feed direction for the initial adjust print.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 86 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 1 . 9 P r e H e a t e r m e nu Set up to acc limatize and pre heat the media b efore printing. Notes The tem perature to be set fo r the Pre Heater vari es depending on the me dia which is us ed.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 87 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 1 . 1 1 D r y e r m e nu Notes Temperature t o be set for the after Heater v aries depending o n the media which is us ed. For recommended temperature settings of the a fter heater, refer to th e "Recommende d media list".
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 88 AP-75760 Re v 1.1 -21/06/20 07, 4.7.2 E ffect me nu Thanks to MUTOHs revolutionary i² technology, it is possible to obtain impeccab le printing quality ev en for the mos t difficult images.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 89 AP-75760 Re v 1.1 -21/06/20 07, Use this menu t o improve the pr int quality by mea ns of intelligen t interweaving prin t algorithms (i²) Setup Item Setting V alue Description None 1 None 2 The effect functi on is not used.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 90 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 2 . 3 I ² a v a i l a b i l i t y There are a lo t of different pri nt modes available o n the ValueJet 1 604. For each mode, 3 diffe rent wave patterns can be chosen, resu lting in differe nt speeds.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 91 AP-75760 Re v 1.1 -21/06/20 07, 4 . 7 . 3 . 1 F l us h i n g r e t ur n c ount m e nu Set the frequen cy (flushing retu rn count) that the pr int head returns to the original spi tting box when setti ng "On Media" in the Flushing men u.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 92 AP-75760 Re v 1.1 -21/06/20 07, 4.7.6 Me dia Widt h men u If media de tection is switched OFF , the media w idth menu allows you to manually ente r the media width .
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 93 AP-75760 Re v 1.1 -21/06/20 07, 4.7.7 Or igin menu Set this menu w hen reprinting on the margin, when the printing data p osition is chan ged to the position o f the already print ed media.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 94 AP-75760 Re v 1.1 -21/06/20 07, 4.7.9 He ad fan menu Activate the head fan if b lurring or dot loss es occur during printing .
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 95 AP-75760 Re v 1.1 -21/06/20 07, 4.7.13 Slant Check menu Setup Item Setting Value Description OFF Slant Check is not per formed. <ON> Slant Check is pe rformed between two consecuti ve print jobs.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 96 AP-75760 Re v 1.1 -21/06/20 07, 4.7.16 Roll Length menu Setup Item Setting V alue Description <OFF> Roll Length is not used. [Enter] key : Save the setting a nd shift to the p revious hierarchy.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 97 AP-75760 Re v 1.1 -21/06/20 07, 4.7.18 CR Mainte nance menu Setup Item Sett ing Value Description Start Clean the wi per. [Enter] key : The print head mo ves to the centre . The wiper move s forward.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 98 AP-75760 Re v 1.1 -21/06/20 07, 4.7.21 IP Address menu Notes Be sur e to set the IP addre ss after consulting y our network ad ministrator. Setup Item Setting Value Description 000.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 99 AP-75760 Re v 1.1 -21/06/20 07, 4.8 OPERATING FROM TH E OPERATION PANE L Notes For the nam es and function s of each key, pleas e refer to Operat ion panel Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 10 0 AP-75760 Re v 1.1 -21/06/20 07, 4.8.2 Stop printing Be sure to read and understand the safety warnings before handling the printer. If you want to sto p printing, opera te as follows.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 10 1 AP-75760 Re v 1.1 -21/06/20 07, 4.8.4 Cut ting m edia Step 1 : Verify the foll owing regarding the o perational condit ion of the product. The operati on panel displays: Re ady to print.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 10 2 AP-75760 Re v 1.1 -21/06/20 07, 4.8.5 Cha nging and conf irming se ttings w hile printing . 4 . 8 . 5 . 1 P r oc e d ur e f or c h a ng i ng a nd c onf i r m i ng s e t t i ng sw h i l e pr i nt i ng .
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 10 3 AP-75760 Re v 1.1 -21/06/20 07, 4 . 8 . 5 . 2 S e t t i ng st h a t c a n b e c h a n g e d or c o nf i r m e d w h i l e pr i nt i ng . Notes The Prin t start menu is disp layed only w hen the printer is warmi ng up.
Users Guide Va lueJet 1604 Chapter 4: Ha ndling the printe r 10 4 AP-75760 Re v 1.1 -21/06/20 07, This page is in tentionally left bla nk..
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 10 5 AP-75760 Re v 1.1 -21/06/20 07, 5 PERIODICAL MAINTENANCE 5.1 D ONE BY END USER 106 5.1.1 Cleaning the printer 106 5.1.2 Cleaning the outer case 106 5.1.3 Cleaning inside the printer 107 5.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 10 6 AP-75760 Re v 1.1 -21/06/20 07, 5.1 DONE BY EN D USER Notes Do not inse rt or drop metal or othe r objects throu gh openi ngs of the printer. It c ould lead to an electr ic shock and / or fire .
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 10 7 AP-75760 Re v 1.1 -21/06/20 07, 5.1.3 Cle aning inside the printer Be sure to read and understand the safety warnings before handling the printer. Step 1 : Open the front cover.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 10 8 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Wipe off paper powder a nd ink from the pl aten using a dust-free and soft cloth slig htly damped with water.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 10 9 AP-75760 Re v 1.1 -21/06/20 07, 5.1.4 Re placing the spitting box sp onges Be sure to read and understand the safety warnings before handling the printer. (1) Pre- tr ansport procedure Replace the sp itting-box spon ges in the followi ng situations.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 0 AP-75760 Re v 1.1 -21/06/20 07, Step 3 : Remove the spi tting-box spon ge from each spitting box b y using forceps. ï ï ï î No. Name 1 spitting boxes 2 spitting-b ox sponge Step 4 : Install the n ew spitting-box sponge to each spitting b ox.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 1 AP-75760 Re v 1.1 -21/06/20 07, 5.1.5 Head cl eaning When to perform? Perform a head c lean if the prints bec ome blurred or are incom plete. Notes Remove media w hile cleaning .
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 2 AP-75760 Re v 1.1 -21/06/20 07, 5.1.6 Cle aning the wipe r (1) Cleaning t ime Clean the wi per once a week or when blurs or incom pleteness in printing remains after th e head cleanin g.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 3 AP-75760 Re v 1.1 -21/06/20 07, Step 5 : Press the [+] key or [-] key to select Set20: C R Maintenance. Step 6 : Press the [ENTER] key o n the operation p anel. CR Ma inte.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 4 AP-75760 Re v 1.1 -21/06/20 07, Step 8 : Open the maintenance c over on the right of the pr inter. ï No. Name 1 Maintenance co ver Step 9 : Use the cleaning stick to r emove the ink and d ust on the cleani ng wiper.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 5 AP-75760 Re v 1.1 -21/06/20 07, Cleaning wiper backside: Wipe vertica lly í ï í î No. Name 1 Cleani ng wiper 2 Cleani ng stick 3 Head cap un it Step 10 : Close the right mainte nance cover Close the cover firmly un til it is locked.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 6 AP-75760 Re v 1.1 -21/06/20 07, Step 11 : Press the [ENTER] k ey on the oper ation panel The pr int head returns to i ts original position The clean ing wiper returns to its original p osition CR Ma inte.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 7 AP-75760 Re v 1.1 -21/06/20 07, 5.1.7 Cle aning around the print head . Be sure to read and understand the safety warnings before handling the printer.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 8 AP-75760 Re v 1.1 -21/06/20 07, Step 4 : Press the [>] key on t he operation pa nel.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 11 9 AP-75760 Re v 1.1 -21/06/20 07, Step 7 : Press the [ENTER] key o n the operation p anel Mainten ance starts The print head m oves to the left. CR Ma intenance: END is displayed on the operation pa nel.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 12 0 AP-75760 Re v 1.1 -21/06/20 07, Step 9 : Confirm, using a light s uch as a penlight, that the re are no fo reign objects, such as dust or ink attached to the following parts: î î ï í ì ì No.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 12 1 AP-75760 Re v 1.1 -21/06/20 07, Step 11 : Close the left maint enance cover. Close the cover firmly un til it is locked. ï No. Name 1 M aintenanc e cover. Step 12 : Press the [ENTER] k ey on the oper ation panel.
Users Guide Va lueJet 1604 Chapter 5: Period ical mainte nance 12 2 AP-75760 Re v 1.1 -21/06/20 07, 5.2 DONE BY AUTH ORIZED MUTO H TECHNICIAN This section des cribes the perio dical part replacement a nd the period ical inspections r equired for this pr inter.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 3 AP-75760 Re v 1.1 -21/06/20 07, 6 TROUBLESHOOTING 6.1 W HEN YOU CAN NOT GENERATE GRAPHICS IN THE WAY YOU W ANT 124 6.1.1 Perform Head cleaning 124 6.1.2 Adjust the print head 125 6.2 W HEN MEDIA IS JA MMED 132 6.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 4 AP-75760 Re v 1.1 -21/06/20 07, Be sure to read and understand the safety warnings before handling the printer. Notes If an error not inc luded in any items of this section occ urs, contact your local MUTOH dealer .
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 5 AP-75760 Re v 1.1 -21/06/20 07, 6.1.2 Adjus t the print head Notes This printe r was adjusted at factory shipment so that it obtains the o ptimum print quality . Adjust t he quality if the p rint quality chang e after the installati on environment or the media is cha nged.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 6 AP-75760 Re v 1.1 -21/06/20 07, Step 6 : Press the [ENTER] key o n the operation p anel. Media: Type 1 is displayed on the operation p anel. Step 7 : Press the [+] key or the [-] key on the operation pane l to select the media ty pe to use.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 7 AP-75760 Re v 1.1 -21/06/20 07, Step 9 : Press the [ENTER] key o n the operation p anel. Mode: Qua lity 1 -> is displaye d on the operati on panel. The displ ay shifts to the p rinting mode menu.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 8 AP-75760 Re v 1.1 -21/06/20 07, Step 13 : Disp lay the Adjust P rint menu on the opera tion panel. Step 14 : Press the [Menu] key on the operation pane l. Menu 1: Set up> is displ ayed on the operat ion panel.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 12 9 AP-75760 Re v 1.1 -21/06/20 07, Step 17 : Press the [ENTER] k ey on the oper ation panel A confirm ation pattern for qua lity adjus.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 0 AP-75760 Re v 1.1 -21/06/20 07, Step 19 : Re gister a set value fo r BI-D Quality (Two-wa y/quality priority mode). Step 20 : Press the [+] key o r the [-] key on the operat ion pa nel to select Adj.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 1 AP-75760 Re v 1.1 -21/06/20 07, Step 23 : Press the [+] or the [ -] key to enter t he number that yo u selected in step c. Step 24 : Press the [ENTER] k ey on the oper ation panel. The set va lue for BI-D Qua lity is registered.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 2 AP-75760 Re v 1.1 -21/06/20 07, 6.2 WHEN ME DIA IS JAMMED Be sure to read and understand the safety warnings before handling the printer. Step 1 : Switch OFF the power o f the printer.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 3 AP-75760 Re v 1.1 -21/06/20 07, Step 4 : Raise the media loading lever . ï í No. Name 1 Media lo ading lever Step 5 : Pull the media to your s ide, and cut the tor n part with cuttin g tools such as a razor bl ade.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 4 AP-75760 Re v 1.1 -21/06/20 07, 6.3 TROUBLE SHOOTING This section de scribes non disp layed malfunc tions and failures of the printer, pos sible causes and countermeasur es. 6.3.1 P roblems in inst allation an d introduc tion Cannot perf orm ink replenishment.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 5 AP-75760 Re v 1.1 -21/06/20 07, Does not work after loading the me dia. No. Possible c ause remedy Reference 1 Is the front c over open or med ia loading lever raised? Close the fron t cover.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 6 AP-75760 Re v 1.1 -21/06/20 07, 6.3.3 M edia-re lated troubleshooti ng The media s lips or is torn during i nitialization. Notes If the medi a is jammed or torn, remo ve it ac cording to when media is jammed No.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 7 AP-75760 Re v 1.1 -21/06/20 07, The wrong me dia size is set duri ng initialization No. Pos si ble cau se Re med y Referenc e 1 Are you using the recommend ed media ? Use the recom men ded media.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 8 AP-75760 Re v 1.1 -21/06/20 07, 6.3.4 P rinting- related troubleshoo ting Printing is partial ly stained or incom plete. Notes Proper print quality may not be obtai ned with the media other than the r ecommended one.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 13 9 AP-75760 Re v 1.1 -21/06/20 07, White or bl ack lines appear o n printed media No. Po ssi bl e c au se R eme dy Reference 1 Are you using the recommende d media? Use the recom men ded media.
Users Guide Va lueJet 1604 Chapter 6 : Tr oubleshoo ting 14 0 AP-75760 Re v 1.1 -21/06/20 07, 6.4 ERROR MESSA GES 6.4.1 Sta tus me ssages This section d escribes mess ages displayed du ring printer norma l operation. When the produ ct is operating correctly, each operation stat us is displayed o n the operation panel as below.
This page is left blank intentionall y.
Een belangrijk punt na aankoop van elk apparaat Mutoh VJ-1604 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Mutoh VJ-1604 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Mutoh VJ-1604 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Mutoh VJ-1604 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Mutoh VJ-1604 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Mutoh VJ-1604 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Mutoh VJ-1604 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Mutoh VJ-1604 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.