Gebruiksaanwijzing /service van het product IDC3000 van de fabrikant NEC
Ga naar pagina of 24
NEC Improved Definition Converter IDC-3000 R User's Manual Printed in Japan 79TM0282 NEC Technologies, Inc. 1255 Michael Drive Wood Dale, Illinois 60191 NEC Improved Definition Converter IDC-3000.
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UN- LESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
CONTENTS FEATURES ..................................................... 1 WARNINGS AND PRECAUTION ................... 2 PART NAMES AND FUNCTIONS .................. 4 FRONT PANEL ......................................................... 4 INDICATORS ..
Warnings and Safety Precaution The NEC IDC-3000 is designed and manufactured to provide long, trouble- free service. No maintenance other than cleaning is required. Use a soft cloth and if necessary, mild detergent. Do not use commercial spray cleaners which may damage the surface.
P AR T NAMES AND FUNCTIONS REMOTE EXT POWER STAND-BY SCAN CONVERTER IDC-3000 VIDEO NTSC PAL 12 3 4 5 MONITOR RGB NOISE REDUCTION MOVIE STILL MODE1 DOWN UP MODE2 NR MOVIE STILL VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 MONITOR RGB NORMALIZE 12 1 2 3 NORM. SET 3D 3D 67 8 FRONT PANEL 12 4 5 3 D C 9 0 A B 4 5 MODE 2 Button Used to select the image system.
VIDEO NTSC PAL 12 3 4 5 MONITOR RGB NOISE REDUCTION MOVIE STILL 12 1 2 3 INDICATORS 6 NR Button Used when screen noise becomes annoying. Each time this button is pressed, the NR function will change a.
VIDEO 1 S-VIDEO AUDIO L R VIDEO 2 S-VIDEO AUDIO L R VIDEO 3 AUDIO L R VIDEO 4 AUDIO L R VIDEO 5 AUDIO L R INPUT AUDIO L R RGB (THROUGH) MONITOR VIDEO1 • 2 S ONLY AUDIO L R R G B HORIZONTAL VERTICAL H/V AUDIO L R PC-CONTROL EXTERNAL CONTROL OUTPUT HV HV-POL.
8 MONITOR Output Jack (OUTPUT) MONITOR (BNC) ........... Outputs the signals of the equipment con- nected to VIDEO 1 through 5. S-VIDEO .......................... Outputs an S video signal, (derived from the signal of the equipment connected to VIDEO 1 or VIDEO 2), which has been divided to a luminance signal (Y) and a chrominance signal (C).
REMOTE CONTROL 3 1 2 9 E 7 4 5 6 0 POWER VIDEO1 RGB SPLIT VIDEO2 VIDEO3 NORMALIZE MODE1 VIDEO4 UP MODE2 DOWN REMOTE CONTROL UNIT RD-338E MONITOR VIDEO5 NOISE REDUCTION MOVIE STILL D C 8 B A F B 1 POWER Button Turns the power on or off. 2 VIDEO 1 Button Switches the unit to the video 1 input mode.
REMO TE CONTR OL NO TES Remote Control Precautions v The remote control system may not function when direct sunlight or strong illumination strikes the remote sensor window of the main unit. v Do not place in locations where there is a high temperature or high humidity.
ADJUSTMENT Adjustment of COLOR, TINT, SHARPNESS, and SOUND (1) Press the MODE 1 button and select the mode to be adjusted. Each press of the MODE 1 button will change the selection as follows: → COLOR → TINT → SHARPNESS → SOUND (2) While the indicator is on, press and hold the UP or DOWN button and adjust.
ON-SCREEN DISPLA Y Screen Display During Input Signal Selection Screen Display During DVNR (Noise Reduction) Selection Display characters during video 1 to 5 input signal selection During video 1 input signal selection .......... SOURCE VIDEO 1 During video 1 S input signal selection .
During the NTSC COLOR Adjustment Display characters during the color adjustment During NTSC ............................................... COLOR Display color COLOR ........................................................ Green Bar Normal ...........
During the TINT (Center) Adjustment TINT R G Display characters during the tint adjustment Display color during the center adjustment Tint .............................................................. Green R .........................................
SOUND – + During the SOUND Adjustment Display characters during the sound adjustment Display color SOUND ........................................................ Green Bar Normal .............................................. Magenta Max ...........
VIDEO 1 S-VIDEO AUDIO L R VIDEO 2 S-VIDEO AUDIO L R VIDEO 3 AUDIO L R VIDEO 4 AUDIO L R VIDEO 5 AUDIO L R INPUT AUDIO L R RGB (THROUGH) MONITOR VIDEO1 • 2 S ONLY AUDIO L R R G B HORIZONTAL VERTICAL H/V AUDIO L R PC-CONTROL EXTERNAL CONTROL OUTPUT HV HV-POL.
Using the EXTERNAL CONTROL Connector 543 21 10 9 8 7 6 15 14 13 12 11 Mini D-SUB 15 Pin Function Table Function Pin No. External control ON External control OFF POWER ON POWER OFF VIDEO 1 VIDEO 2 VIDE.
Connection Examples for Personal Computer Control for the Two Varia- tions. 1 RS-232C IDC-3000 Personal computer RS-232C PC-CONTROL Terminal 1 When using the PC-CONTROL terminal as RS-232C: Request to.
RA CK MOUNTING Use the accompanying rack mount bracket to mount the IDC-3000 to the rack. NOTE: This rack mount bracket is designed for used with EIA standard racks. 1 Remove the four (A) screws from the IDC-3000. 2 Use the screws removed in Step 1 to fasten the supplied rack mount bracket (B) to the IDC-3000.
SPECIFICA TIONS X Input impedance: 75 Ω 1.0 Vp-p Y: Input impedance: 75 Ω 1.0 Vp-p C: Input impedance: 75 Ω 0.28 Vp-p (Burst level) Input impedance: 22 k Ω or greater 0.5 Vrms Output impedance: 75 Ω 1.0 ± 0.1 Vp-p (with 75 Ω termination) Y: Output impedance: 75 Ω 1.
APPENDIX (IDC-3000 stand alone PC-CONTR OL command reference) You can control the main functions from external equipment such as personal computer using the PC-CONTROL terminal. The following sections explain the interface. Interface Condition • RS-232C or RS-422 • Baud rate .
PC CONTROL COMMAND LIST FOR USE WITH THE IDC-3000 COM2 4E 4F 47 COM1 9F DF Contents Power On Power Off Input switching Length 00 00 01 COM1 3F COM2 4E 4F 47 Contents Power On (ACK) Power Off (ACK) Inp.
` PROFESSIONAL GRAPHICS PRODUCTS LIMITED W ARRANTY NEC Technologies, Inc. (hereafter NECTECH) warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year from the date of the first customer purchase.
b • MEMO • c.
Een belangrijk punt na aankoop van elk apparaat NEC IDC3000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NEC IDC3000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NEC IDC3000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NEC IDC3000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NEC IDC3000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NEC IDC3000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NEC IDC3000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NEC IDC3000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
