Gebruiksaanwijzing /service van het product MultiSync MD302C6 van de fabrikant NEC
Ga naar pagina of 36
MD302C6.
Disclaimer * Windows and MS-DOS are trademarks and/or registered trademarks of Microsoft Corporation in the United States and/or other countries. * VESA is a trademark of the Video Electronics Standard Association. * All other products and company names are trademarks of their respective owners.
English.
Inde x Registration Information ...............................................................................................................English-2 Intended Use .....................................................................................
English-1 English Symbol Inf ormation This symbol warns the user that uninsulated voltage within the unit may have suffi cient magnitude to cause electric shock.
English-2 Registration Inf ormation Dec laration Means of Conformity Device Classifi cation: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.
English-3 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE.
English-4 Intended Use The MD302C6 color monitor is intended to be used for displaying and viewing of digital images by trained physicians. Caution: The MD302C6 color display cannot be used for a life-support system. This device is designed as component of a fi nal system which is in compliance to IEC 60601-1-1 requirements.
English-5 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONIT OR: W ARNING: Do not modify this equipment without authorization of the manufacturer .
English-6 Image P ersistence: Image persistence exists, when a residual or “ghost” image of a previous image remains visible on the screen. Unlike with CRT monitors, image persistence on LCD monitors is not permanent, but constant images being displayed for a long period of time should be avoided.
English-7 English Contents Y our new NEC monitor box* should contain the following: • MD302C6 monitor with tilt/swivel/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable.
English-8 Connecting the cables T o connect the LCD monitor to your system, please follow these instructions: NO TE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller that can output a resolution of 3280 x 2048 is needed.
English-9 English Caution For connection to the DVI input(s), make sure to use a DVI Dual Link cable. Dual-link Single-link • Precautions to display tw o 3MP screens from one computer (Figure D): A display controller model, which has two outputs of the same signal type (either DVI + DVI or DisplayPort + DisplayPort) is recommended.
English-10 When using a USB hub... This display has a USB 2.0 compliant hub. By connecting the supplied USB cable to a USB 2.0 port of the computer or another USB 2.
English-11 English Contr ols Po wer On/Off Press and hold the switch to turn on/off the display . NO TE: Wait at least 10 seconds between on/of f actions. MINUS button Without displaying the OSD on the screen, press this button to switch the input source of INPUT 1 to DisplayPort 1 or DVI 1.
English-12 DOWN UP DVI 2 DisplayPort DVI 1 DisplayPort POWER AC IN AC Inlet: Connect the supplied Power cord. Main power switch: Main power supply switch. INPUT1 of DisplayP or t-1: Digital video signal input port.
English-13 English Changing signal inputs T wo methods to switch signal inputs are available, input port switching and input source switching. Press the appropriate buttons located on the front bezel of the display as follows. Input port switching “Input port” here means a combination of the input sources of DisplayPort and DVI.
English-14 The following shows an example of the case when the resolution of QXGA (1536 x 2048) is selected for both INPUT1 and INPUT 2. By pressing the MENU button and switching a port, both screens are active when INPUT 1 + INPUT 2 is selected.
English-15 English Press the plus (+) button on the front bezel without displaying the OSD menu and the input source of INPUT 2 is switched. The following shows an example of the case when Displayport is selected for the input source of both INPUT 1 and Input 2, and the input source of INPUT 2 is switched to DVI.
English-16 Displa y inf ormation Press the appropriate button located on the front bezel of the display to see display information or change settings. 1. Displaying the OSD men u Press and hold the MENU button for 2 seconds. The following OSD menu appears.
English-17 English OSD menu hierar c hy The OSD full menu structure and a brief explanation for each menu item is listed as follows. The highlighted items are shown in the Reference Menu. The other items are only shown in the Full Menu. • INFORMA TION INFORMA TION .
English-18 Displa ying inf ormation V arious display information can be checked by selecting from the OSD menu. 1. Displaying the OSD main men u Press and hold the MENU button for 2 seconds. The OSD menu appears. Press either + or - button to move the cursor “ ” and select “INFORMA TION”.
English-19 English P erf orming a DICOM conf ormance test NO TE: This function is available only when the display has been calibrated to DICOM GSDF . Performing a DICOM conformance test ensures DICOM conformance of the display by measuring and checking the display properties.
English-20 4. P erforming the DICOM conf ormance test Press either + or - button to select “Y es” for ST ART TESTING. (DICOM conformance test starts immediately). Screen that shows the test is in e xecution It takes between 30 seconds to 1 minute to complete the test.
English-21 English Switching the OSD men u Different menu contents can be shown for the menu screen by switching between “Reference Menu” and “Full Menu”. Full Menu allows setting changes. Select “MENU SELECTION” for switching menu contents.
English-22 2. Switching EDID sub menu Press the menu button and the SWITCHING EDID submenu appears. Press either + or - button to move the cursor “ ” and select the preferred mode. See below for selectable resolutions. Press the MENU button again to store the preferred EDID.
English-23 English Changing confi gurations The model MD302C6 can save up to three different Luminance - Gamma - Color Tint confi guration settings within the display . These settings are selectable by a confi guration number , which is shown in the PRESENT ST A TE submenu.
English-24 3. Confi rming the confi guration c hang e Press the MENU button and return to the full main menu, same as in step 1. Press either + or - button to move the cursor “ ” and select “PRESENT ST A TE”. Full Menu Press the MENU button and the PRESENT ST A TE submenu with the selected confi guration number appears.
English-25 English Direct OSD setting menu The direct OSD setting menu allows function setting to be enabled or the mode setting to switch an input signal. Follow the instructions below . By default, this function is disabled. Functions to be enabled 1.
English-26 Enable Functions Explanation Disable Disables both input signal switching and input port switching. (When you try disabled switching operation, the menu will show “LOCKED”). Enable Switching Input Source Enables input source switching only .
English-27 English 3. Selecting switc hing mode of an input signal Press the MENU button and the INPUT SOURCE BUTT ON MODE submenu appears. INPUT SOURCE BUTT ON MODE Press either + or - button to move the cursor “ ” and select either mode.
English-28 Specifi cations Monitor Specifi cations MD302C6 Notes LCD panel color Clear Base LCD 30.0-inch (76.8 cm), color , TFT , Active matrix type, normally black Anti-glare Pixel pitch (H x V) 0.197 x 0.197 mm Display area (H x V) 645.5 x 403.05 mm Pixel (H x V) 3280 x 2048 Display colors 8 bit:16.
English-29 English Attaching a wall mount or m ulti-displa y mounting arm The tilt and swivel stand, as shipped with the display , is interchangeable with commercially available wall mounts or multi-d.
English-30 Antitheft Security Slot The display is equipped with the security slot for use with the MicroSaver Security Lock System by Kensington T echnology Group. The MicroSaver locks are available at PC supply stores. Note: Kensington is the registered trademark of Kensington T echnology Group.
English-31 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.
NEC Display Solutions, Ltd. 4-28, Mita 1-chome, Minato-ku, T okyo, Japan NEC Display Solutions of America 500 Park Blvd. Suite 1 100 Itasca, Illinois 60143 USA Phone: +1-630.467.3000 Fax: +1-630.467.3010 NEC Display Solutions Europe GmbH Landshuter Allee 12-14 D-80637 Muenchen Germany Phone: +49(0)89/99699-0 Fax: +49(0)89/99699-500 V ol.
Een belangrijk punt na aankoop van elk apparaat NEC MultiSync MD302C6 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NEC MultiSync MD302C6 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NEC MultiSync MD302C6 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NEC MultiSync MD302C6 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NEC MultiSync MD302C6 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NEC MultiSync MD302C6 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NEC MultiSync MD302C6 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NEC MultiSync MD302C6 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
