Gebruiksaanwijzing /service van het product VT660 van de fabrikant NEC
Ga naar pagina of 41
Portable Projector VT660/VT560/VT460 User’ s Manual.
E-2 Safety Cautions Precautions Please read this manual carefully before using your NEC VT660/VT560/ VT460 Projector and keep the manual handy for future reference. Y our serial number is located on the bottom of your projector . Record it here: CAUTION To turn off main power , be sure to remove the plug from power outlet.
E-3 Fire and Shock Pr ecautions 1. Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the build-up of heat inside your projector . Allow at least 3 inches (10 cm) of space between your projector and a wall. 2. Prevent foreign objects such as paper clips and bits of paper from falling into your projector .
E-4 T ABLE OF CONTENTS Important Information ..................................................... E-2 Safety Cautions ............................................................................................................... E -2 What's in the Box? .
E-5 INTRODUCTION Introduction to the Pr ojector This section introduces you to your new VT660/VT560/VT460 Projector and describes the features and controls. Congratulations on Y our Purchase of The VT660/VT560/ VT460 Projector The VT660/VT560/VT460 is one of the very best projectors available today .
E-6 Part Names of the Pr ojector V entilation (outlet) Heated air is exhausted from here * This security slot supports the MicroSaver ® Security System. MicroSaver ® is a registered trademark of Kensington Microware Inc. The logo is trademarked and owned by Kensington Microware Inc.
E-7 7 6 5 10 13 1 9 12 8 2 3 4 11 T op Features 1. POWER Button (ON / ST AND BY)( ) Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. To turn on the projector , press and hold this button for a minimum of two seconds.
E-8 1. RGB IN / Component Input Connector (Mini D-Sub 15 Pin) Connect your computer or other analog RGB equipment such as IBM compatible or Macintosh computers.
E-9 Part Names of the Remote Control NOTE: If you are using a Macintosh computer , you can click either the CANCEL (right-click) or ENTER (left-click) button to activate the mouse. 1. Infrared T ransmitter Direct the remote control toward the remote sensor on the projector cabinet.
E-10 Battery Installation 1. Press firmly and slide the battery cover off. 2. Remove both old batteries and install new ones (AA). Ensure that you have the batteries' polarity (+/-) aligned correctly . 3. Slip the cover back over the batteries until it snaps into place.
E-11 3 1 2 INST ALLA TION AND CONNECTIONS This section describes how to set up your projector and how to connect video and audio sources. To the wall outlet. Setting Up the Scr een and the Projector Selecting a Location The further your projector is from the screen or wall, the larger the image.
E-12 NOTE: Distances may vary +/-5%. Distance Chart B = V ertical distance between lens center and screen center C = Throw distance D = V ertical distance between lens center and top of screen (bottom.
E-13 Making Connections NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector .
E-14 To connect SCART output (RGB) Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection. NOTE: Audio signal is not available for this connection. RGB IN Video equipment such as DVD player Projector ADP-SC1 Commercially available SCAR T cable Female 1.
E-15 RGB IN AUDIO OUT L AUDIO IN LR R Component YC b C r Connecting Y our DVD Player DVD player Y ou can connect your projector to a DVD player with component output or Video output. T o do so, simply: 1. T urn off the power to your projector and DVD player.
E-16 AUDIO OUT LR AUDIO IN LR VIDEO OUT S-VIDEO OUT VCR/ Laser disc player Connecting Y our VCR or Laser Disc Player Audio equipment S-Video cable (not supplied) V ideo cable (not supplied) Audio cable (not supplied) Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector .
E-17 PROJECTING AN IMAGE (BASIC OPERA TION) This section describes how to turn on the projector and to project a picture onto the screen. Tu r ning on the Projector NOTE: • The projector has two pow.
E-18 Selecting a Sour ce Selecting the computer or video source Using the Remote Control OFF ON VIDEO S-VIDEO RGB PJ MAGNIFY SELECT E M N U T E R N E N C E A C L AUTO ADJ. FREEZE PIC-MUTE PICTURE VOLUME HELP ASPECT POWER Press any one of the RGB, VIDEO or S-VIDEO buttons.
E-19 CAUTION: Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector . Zoom Use the ZOOM lever to finely adjust the image size on the screen.
E-20 Optimizing RGB Picture Automatically Adjusting the Image Using Auto Adjust Optimizing RGB image automatically Press the Auto Adjust button to optimize an RGB image automatically .
E-21 OFF ON VIDEO S-VIDEO RGB PJ MAGNIFY SELECT E M N U T E R N E N C E A C L AUTO ADJ. FREEZE PIC-MUTE PICTURE VOLUME HELP ASPECT POWER OFF ON VIDEO S-VIDEO RGB PJ MAGNIFY SELECT E M N U T E R N E N C E A C L AUTO ADJ.
E-22 Tu r ning Off the Image and Sound Press the PIC-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. PIC-MUTE Freezing a Pictur e Press the FREEZE button to freeze a picture. Press again to resume motion.
E-23 USING ON-SCREEN MENU Basic Menu Operation Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced mo- tion video image is projected. 1. Press the MENU button on the remote control or projector cabinet to display the Menu.
E-24 List of Menu Items Default Factory Default Current Signal Factory Default All Data Clear Filter Usage Clear Lamp Hour Meter Information Information (page1) Source Index, Horizontal Frequency , Ve.
E-25 Menu windows or dialog boxes typically have the following elements: T itle .................... Indicates the menu title. Highlight ............. Indicates the selected menu or item. Source ................ Indicates the currently selected source.
E-26 Menu Descriptions & Functions Picture User Adjust (when using User ) When selecting user adjustable presetting (User), the submenu will be displayed. Y ou can customize each gamma or color . T o do so, first select “User” and press the ENTER button, and then proceed the following steps.
E-27 Selecting Aspect Ratio [ Aspect Ratio] Aspect Ratio allows you to select the best Aspect mode to display your source image. Y ou can also display the Aspect Ratio window by pressing the “ASPECT” button on the remote control. (See page E-9). When 4:3 is selected from the source (i.
E-28 Selecting Signal Format [Signal Select] <RGB> Allows you to choose “RGB” for an RGB source such as a computer , or “Component” for a component video source such as a DVD player . Normally select “RGB/Component” and the projector automatically detects a component signal.
E-29 Default Returning to Factory Default The Factory Default feature allows you to change adjustments and set- ting to the factory preset for source except the following: <Current Signal> Resets the adjustments for the current signal to the factory preset lev- els.
E-30 MAINTENANCE This section describes the simple maintenance procedures you should follow to replace the lamp and clean the filter . Replacing the Lamp After your lamp has been operating for 2000 hours (up to 3000 hours in Eco mode) or longer , the LAMP indicator in the cabinet will blink red and the message will appear .
E-31 Cleaning the Cabinet and the Lens Cleaning Cleaning or Replacing the Filter The air-filter sponge keeps the inside of the projector from dust or dirt and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may over- heat.
E-32 TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector . Power Indicator Indicator Condition Projector Condition Note Off Blinking light Steady light Green blinking Orange blinking 0.5 sec ON, 0.
E-33 Does not turn on No picture Image isn’t square to the screen Picture is blurred Image is scrolling verti- cally , horizontally or both Remote control does not work Indicator is lit or blink- ing Cross color in RGB mode • Check that the power cable is plugged in and that the power button on the projector cabinet or the remote control is on.
E-34 SPECIFICA TIONS This section provides technical information about the VT660/VT560/VT460 Projector's performance Model Number VT660/VT560/VT460 Optical LCD Panel VT660: 0.
E-35 APPENDIX Cabinet Dimensions Unit = mm (inch) Mini D-Sub 15 Pin Connector Pin Assignments of D-Sub RGB Input Connector Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green or Sync on Green Y .
E-36 Compatible Input Signal List Signal Resolution Frequency H. Refresh Rate ( Dots ) ( kHz ) ( Hz ) NTSC – 15.734 60 PA L– 15.625 50 SECAM – 15.625 50 VESA 640 ⳯ 480 31.47 59.94 IBM 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 31.47 60 MAC 640 ⳯ 480 34.
E-37 T ravelCar e Guide T ravelCare - a service for international travelers This product is eligible for "T ravelCare", NEC's unique international war- ranty . Please note that T ravelCare coverage differs in part from coverage un- der the warranty included with the product.
E-38 In Asia and Middle East NEC Viewtechnology , Ltd. Address: 686-1, Nishioi, Oi-Machi, Ashigarakami-Gun, Kanagawa 258-0017, Japan T elephone: +81 465 85 2369 Fax Line: +81 465 85 2393 Email Address: support_pjweb@nevt.nec.co.jp WEB Address: http://www .
E-39 T O: NEC or NEC's Authorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would like to apply your T ravelCare Service Program based on attached registration and .
E-40 Condition of your T ravelCare Service Program Enduser is requested to understand following condition of T ravelCare Service Program and fill necessary information into the application sheet. 1. Service Options: There are 3 types of "Service" available.
E-41 7N950141.
Een belangrijk punt na aankoop van elk apparaat NEC VT660 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NEC VT660 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NEC VT660 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NEC VT660 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NEC VT660 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NEC VT660 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NEC VT660 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NEC VT660 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
