Gebruiksaanwijzing /service van het product 4625 van de fabrikant Aspire Digital
Ga naar pagina of 178
Aspire 4625/4625G Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the up dat es made on Aspire 4625/4625G service guides. Date Chapter Up date s.
III Copyright Copyright © 2010 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a.
IV Conventions The following conventi ons are used in this manual: NOTE: This symbol where placed in the Ser vice Guide designates a co mponent that should be recyc led according to th e local regulations. SCREEN MESSAGES Denotes actual messages that appe ar on screen.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rma tion. 1. This Service Guide provides you with all techni cal information relating to the BASIC CONFIGUR A TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Mainboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 Removing the Thermal Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Removing the PCH Thermal Module .
IX T able of Contents Intermittent Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 Undetermined Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: NOTE: Items denoted with a n (*) are only avail able for selected mod els.
2 Chapter 1 • HDMI ™ (High-Definition Multimedia Interface) with HDCP (High-band width Digital Content Protection) support Audio • Optimized Dolby Ho me Theater ® v3 audio e nhancement, featuri.
Chapter 1 3 • 342 (W) x 245 (D) x 24/47.6 (H) mm (13.46 X 9 .64 X 0.94/1.6 inches) • 2.26 kg (4.9 lbs.)15 with 9-cell battery Power adapter and battery • ACPI 3.0 CPU power manageme nt standard: supports S tandby and Hibernation power-saving modes • Acer PowerSmart 3-pin 65 W AC adapter • 95 (W) x 50 (D) x 25.
4 Chapter 1 • Google ™ Setup • Google T oolbar ™ •M i c r o s o f t ® Office Personal 2007 (Service Pack 2) (Jap an only , subject to customer request) •M i c r o s o f t ® Office T rial (Service Pack 2) •M i c r o s o f t ® Works S E 9 •M i c r o s o f t ® Works 9 •M i c r o s o f t ® Works 8.
Chapter 1 5 Warranty • One-year International Tr avellers W arranty (ITW) Environment • T emperature: • Operating: 41 °F to 95 °F (5 °C to 35 °C) • Non-operating: -4 °F to -149 °F (20 °.
6 Chapter 1 System Block Diagram Keyboard LAN Atheros PCIE-LAN AR8151 RJ45 SATA0 150MB CRT HT3 ALINK X4 X1 (10/100/1000) Speaker SATA - CD-ROM USB2.0 Winbond KBC LPC 35mm X 35mm A12 638P (PGA)45W/35W .
Chapter 1 7 Your Acer Aspire Notebook tour Front View No. Icon Item Description 1 Acer Crystal Ey e webcam Web camera for video communication (for selected models). 2 Microphone Internal microphone for recording sound. 3 Display screen Also called Liquid-Crystal Display (LCD), displays computer output.
8 Chapter 1 4 HDD Indicates when the hard disk drive is active. Num Lock indicato r Lights up when Num Lock is activated. Caps Lock indicato r Lights up when Caps Lock is activated. 5 Power button T urns the computer on and off. 6 Keyboard For entering data into your computer .
Chapter 1 9 Closed Front View Left View No. Icon Item Description 1M u l t i - i n - 1 card reader Accepts Secure Digital (SD), MultiMediaCard (MMC), Memory S tick (MS), Memory S tick PRO (MS PRO), xD-Picture Card (xD). Note: Push to remove/i nsta ll the car d.
10 Chapter 1 Right View Bottom View No. Icon Item Description 1 USB 2.0 ports Connect to USB 2.0 devices (e.g. USB mouse, USB camera). 2 Optical drive Internal optica l drive; accepts CDs or DVDs. 3 Optical disk access indicator Lights up when the optical drive is acti ve.
Chapter 1 11 Indicators The computer has several easy-to-read status indicators . The front panel indicators are visible even when the computer cover is closed. 3 Hard disk bay Houses the computer's hard disk (secured with screws). 4 Memory compartment Houses the computer's main memory .
12 Chapter 1 TouchPad Basics The following items show you how to use the T ouchPa d: • Move your finger across the T ouchPad (1) to move th e cursor . • Press the left (2) and right (3) buttons located beneath the T ouchPad to perform selection and execution functions.
Chapter 1 13 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, fun ction and special keys. Lock Keys and embedded numeric keypad The keyboard h as two lock keys which you can toggle on a nd off.
14 Chapter 1 Windows Keys The keyboard has two keys that perform Wi ndow s-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
Chapter 1 15 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
16 Chapter 1 Hardware Specifications and Configurations Skew Comparison Part C1 ZQ2B(AMD1. 8,CMO14 ,SAM1G*2,SGA250G) C2 (UMA) ZQ2C(AMD1.6,SA14,1 G*1+2G*1,TOS320G) C3 (UMA) ZQ2C(AMD2.1,AU14,2 G*1+4G*1,WDC640G) AMD CPU CPU AMD PhenomII P820 1.8G 25W 1.5M L2, T riple-Core CPU AMD PhenomII P920 1.
Chapter 1 17 NOTE: Parts that are the same across all skews have been removed from this table. CPU Processor Specifications CPU Fan T ru e V alue T ab le (Performance Mode) • Throttling 50%: On = 95.
18 Chapter 1 CPU Fan T rue V alue T able (Power Savin g Mode) • Throttling 50%: On = 95C; Off = 90C • OS Shutdown: 98°C • H/W Shutdown: 95°C BIOS System Memory Fan On (°C) Fan Off (°C) RPM 43 38 2600 55 50 3200 65 60 3600 72 69 3900 81 76 4200 94 89 95% Duty Item Specification BIOS vendor Phoenix BIOS V ersion 1.
Chapter 1 19 Memory Combinations Above table list s some system memory configurations. Y ou may combine DIMMs with various capacities to form other combinations.
20 Chapter 1 Wireless Module LAN Module Bluetooth Item Specification Manufacturer • Atheros HB93, Br oadcomm 43225, Atheros HB97, Atheros HB95BG S pecifications • IEEE 802.
Chapter 1 21 Hard Disk Drive Interface Item Sp ecification V endor & Model Name Seagate HGST T oshiba Western Digital Samsung Capacity (MB) 160 , 250, 320, 500 160, 250, 320, 500 160, 250, 320, 50.
22 Chapter 1 Super-Multi Driv e Module Item Specification V end or & model name HLDS G T20N Sony AD7580S Performance S pecificatio n With CD Diskette With DVD Diskette With CD Diskette With DVD Diskette T ransfer rate (MB/ sec) Sustained: 3,600 KB/s (24x) max.
Chapter 1 23 Audio Interface Keyboard Contro ll er Battery RTC Battery Item Specif ication Codec Controller Realtek ALC271X high definition audio codec with embed ded class-D speaker amplifier Audio o.
24 Chapter 1 AC Adapter System LED Indicator LCD 14” Item Specification Input rating 100 V ac to 240 V ac Maximum input AC current 100 V ac, 240 V ac / 3.
Chapter 1 25 LCD Display Supported Resolution Vid eo I n t er f a c e VRAM HDMI Port Resolution 24 bits 30 bits 36 bits 48 bits 640X480p/60Hz 4:3 Y es Y es Y es Y es 720X480p/60Hz 4:3 Y es Y es Y es Y.
26 Chapter 1 Card Reader LCD Inverter (Not available with this model) PCMCIA Port (Not available in this model) Item Specification Part Name R ealT ek RT5160 Package 5-in-1 card reader General Feature.
Chapter 1 27 System Power Manag ement Mechanical off is a condition wher e all power except the R TC battery has been removed from the system. 1. Initial to On st ate: When the AC adapter or Battery p.
28 Chapter 1.
Chapter 2 29 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is alre ady properly configured and optimi zed, and you do not need to run this utility .
30 Chapter 2 Aspire JV41 BIOS Information The Information screen displa ys a summary of the comput er hardware information. NOTE: The screen above is for your reference only . Actual values may differ according to model. The table below describes the parameters in this screen.
Chapter 2 31 Main The Main screen allows th e user to set the system time and date as well as enable and disable bo ot options and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen.
32 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mputer from unauthori zed use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Chapter 2 33 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a pa ssword in the “Enter New Pa ssword” fiel d.
34 Chapter 2 Boot This menu allows the user to deci de the order of boot devices to l oad the operating syste m. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module bay . Select Boot Devices to select specific devices to support boot.
Chapter 2 35 Exit The Exit screen allows you to save or discard any changes you made an d qui t th e BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setup and save your changes.
36 Chapter 2 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following condition s: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the flash utility to update the system BIOS flash ROM.
Chapter 2 37 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order , for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
38 Chapter 2 WinFlash Utility Perform the following steps to use the WinFlash Utility: 1. Double-click the WinFlash executable. 2. Click OK to begin the update.
Chapter 2 39 Remove HDD/BIOS Password Utilities This section provide s you with de tails about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is gen erated. T o reset the HDD p assword, perform the following step s: 1.
40 Chapter 2 Removing BIOS Passw ords If you key in the wrong HDD password three times, an error is gen erated. T o clean the User or Supervisor passwords, perform the following steps: T o reset the BIOS password, perform the following steps: 1. On another computer , run BIOS_PW .
Chapter 2 41.
42 Chapter 2 Clearing BIOS Passwords T o clear the User or Supervisor passwords, open the DIMM door and use a metal instrument to short the G1 jumper .
Chapter 2 43 Using Boot Sequence Selector The Boot Sequen ce Selector allows the boot o rder to be change d withou t accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen.
44 Chapter 2 Configuring UUID Values 1. Boot into DOS. 2. Run UUID.bat Using the LAN MAC EEPROM Utility Y ou can use the MAC.BA T utility to write t he MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (for example: Notepad) to open the MAC.
Chapter 3 45 Machine Disassembly and Replacement IMPORT ANT : The outside housing and color may vary from the mass produced model. This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting .
46 Chapter 3 General Information Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Place the system on a flat, st able surface.
Chapter 3 47 External Module Disassembly Process IMPORT ANT : The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic represen tation on the entire disassembly seque nce and instructs you on the components that need to be remo ved during servicing.
48 Chapter 3 Removing the Battery Pack 1. T urn computer over . Slide the battery lock in the direction shown. 2. Slide and hold the battery rel ease latch to the release po sition (1), then lift out the battery pack from the main unit (2). Please det ach the batter y and follow local regulations for disposa l.
Chapter 3 49 Removing the SD dummy card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot..
50 Chapter 3 Removing the Lower Cover 1. See “Removing the Battery Pack” on page 48. 2. Remove the six (6) screws from the lower cover . 3. Remove the lower cover as shown.
Chapter 3 51 Removing the Optical Drive Module 1. See “Removing the Lower Cover” on page 50. 2. Remove the screw securing the ODD module. 3. Using your fingers, pu ll the optical drive module out from the chassis. 4. Remove the two screws securing the ODD bracket and re move the ODD bracket from the opti cal disk drive module.
52 Chapter 3 5. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module. Ste p Size Quantity Screw T ype ODD Bracket M2.
Chapter 3 53 Removing the DIMM Modules 1. See “Removing the Lower Cover” on page 50. 2. Push out the release latches on both sides of the DIMM socket to release th e DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the seco nd DIMM module if present.
54 Chapter 3 Removing the WLAN Module 1. See “Removing the Lower Cover” on page 50. 2. Disconnect the two (2) antenn a cables from the WLAN Board NOTE: Cable placement is Black to the TR1 terminal (next to DIMM module) and Wh ite to the TR2 terminal (closest to the edge of the chassis).
Chapter 3 55 4. Detach and remove the WLAN Board from the WLAN socket..
56 Chapter 3 Removing the Hard Disk Drive Module 1. See “Removing the Lower Cover” on page 50. 2. Using the pull-tab, slide the HDD Module in the di rection of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay . 4.
Chapter 3 57 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Step Screw Quantity Part No. Lower Cover M2.5*6.5 1 1 86.ARE07.001 M2.5*4 2 86.PSR07.001 M2.0*6 2 86.S6 507.001 M2.0*3widehead 4 86.ARE07.002 Upper Cover M2.5*4 5 86.
58 Chapter 3 Removing the Keyboard CAUTION: Using metal tools to remove the Keyboard ma y cause damage to the outer casing. It is recommended that you use only your fingers and plastic to ols to remove the Keyboard. 1. See “Removing the Battery Pack” on page 48.
Chapter 3 59 5. Open the locking latch on the FFC, an d disconnect the cable as shown. 6. Lift the keyboard clear of the chassis. Removing the Upper Cover 1. See “Removing the Keyboard ” on page 58. 2. T urn the computer over . Disco nnect the fo llowing four cables from the Mainboard: a.
60 Chapter 3 NOTE: Avoid pulling on cables directly to prevent damage to the connectors. Use the pull-tabs on FFC cables whenever available. 3. Disconnect A as sho wn. 4. Release the locking latch and remove B as shown. 5. Release the locking latch and remove C as shown.
Chapter 3 61 7. Remove the sixteen (16) securi ng screws from the lower cover . NOTE: 8. Remove the seven (7) screws from the top cover . Ste p Size Quantity Screw T ype Lower Cover (red callout) M2.5*6.5 1 1 Lower Cover (green callout) M2.5*4L 4 Lower Cover (blue callout) M2.
62 Chapter 3 9. Remove the Upper Cover by lifting directly upward from the front as shown. Removing the Power Switch Board 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Power Switch Board in the Upper Cover . 3. Release the securing latch holding t he Power Switch Board FFC and remove.
Chapter 3 63 4. Remove the two (2) screws and lift the Powe r Switch Board clear of the Upper Cover . Removing the Function Board 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Function Board in the Upper Cover . Ste p Size Quantity Screw T ype Power Switch Board M2.
64 Chapter 3 3. Remove the two (2) screws attaching it to the upper cover . 4. Lift the Function Board clear of the Upper Cover , but do not remove completely . 5. T urn the Function Board over . Release the securing latch holding the Function Board F FC and remove.
Chapter 3 65 Removing the USB Board 1. See See “Removing the Upper Cover” on page 59. 2. Remove the single securing screw from t he USB Board. 3. Release the FFC latch and remove the FF C cable from th e mainboard connector . 4. Release the FFC latch and remove the FFC cable from th e USB connector .
66 Chapter 3 5. Lift the USB Board upward away from the chassis. Removing the Bluetooth Module 1. See “Removing the Upper Cove r” on page 59. 2. Disconnect the cable from the Mainboard and lift the Bluetooth Module off the mainboard. 3. Remove the single securing screw from the Bluetooth board.
Chapter 3 67 4. Remove the Bluetooth board from the mai nboard and di sco nnect the cable as shown. Removing the LCD Module 1. See “Removing the Upper Cove r” on page 59. 2. Disengage the WiFi a ntennas from the guides o n the bottom cover . 3. Rest the computer on the back of the LCD as shown.
68 Chapter 3 4. Peel back the adhesive holding the L VDS cable. 5. Pull up on th e L VDS cable to disconnect it from the mainboard. 6. Unlock the microphone cable release it from the clasps on the cooling fan.
Chapter 3 69 7. Remove the four securing screws (t wo each side) from the LCD module. 8. Ensure that all cables entering the LCD are free of th e chassis and remove the LCD module from the chassis. Ste p Size Quantity Screw T ype LCD Module (red callouts) M2.
70 Chapter 3 Removing the Mainboard 1. See “Removing the Bluetooth Modu le” on page 66. 2. See “Removing the LCD Module” on page 67. 3. Disconnect th e righ t speaker cable. 4. T urn the computer over and remove the DC-In cable. 5. Remove the three (3) securing screws from the Mainboard.
Chapter 3 71 6. Lift the Mainboard right side first and remove it from the Lower Cover . Removing the Thermal Module 1. See “Removing the Mainboard” on page 70. 2. T urn the Mainboard over and disconnect the Fan cable as shown. Ste p Size Quantity Screw T ype Mainboard M2.
72 Chapter 3 3. Loosen the six (6) captive screws (in numerical orde r from 1 to 6) and remove the two (2) screws (green callouts - numbers 7 & 8) from the CPU Thermal Module. 4. Using both hands, lift the Thermal Module clear of the Mainboard. Ste p Size Quantity Screw T ype Thermal Module M2.
Chapter 3 73 Removing the PCH Thermal Module 1. See “Removing the Mainboard” on page 70. 2. remove the two (2) screws from the PCH Thermal Modul e. 3. Lift the PCH Thermal Module clear of the Mainboard. Removing the CPU 1. See “Removing the Therma l Module ” on page 71.
74 Chapter 3 3. Lift the CPU clear of the socket as shown. IMPORT ANT : The pins on the undersi de of the CPU are very delicate. If they are damaged, the CPU may malfunction. Place the CPU on a clean, d ry surface when it is not installed. Removing the RTC Battery 1.
Chapter 3 75 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*4 2 86.PSR0 7.0 01 LCD Panel M2.
76 Chapter 3 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 67. 2. Remove the two (2) bezel screws. 3. S t arting from the top-center of t he beze l, pry the bezel upwards and away from the panel. Move along the top and sides until the bezel is completely detached.
Chapter 3 77 4. Grasp the hinges and lift the Bezel clear of the LCD Module in the direction shown . Removing the Camera Module 1. See “Removing the LCD Bezel” on page 76.
78 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Module” on page 77. 2. Disengage the vari ous cables from the h inges. 3. Remove the four (4) securing screws from the LCD Panel. 4. Disengage the L VD S cable from the left h inge and the cable guides.
Chapter 3 79 5. Lift the LCD Panel clear of the module a s shown. Removing the FPC Cable 1. See “Removing the LCD Panel” on page 78. 2. T urn the LCD panel over to expose the rear . Di sengage the adhesive strip se curing it in place. 3. Lift the adhesive protector and d isc onnect the cable from the LCD Pane l.
80 Chapter 3 Removing the Microphone Module 1. See “Removing the LCD Panel” on page 78. 2. Remove the adhesive tape covering the microphone cable. 3.
Chapter 3 81 Removing the Antennas 1. See “Removing the LCD Panel” on page 78. 2. Disengage the left antenna cable from the guides. 3. Disengage the right antenna cable from the guides. 4. Remove the adhesive tape and lift the left side antenna from the LCD module as shown.
82 Chapter 3 5. Remove the adhesive tape and lift the right side antenna from the LCD module as shown. Removing the Hinges 1. See “Removing the LCD Panel” on page 78. 2. Remove the four (4) screws from the hinges 3. Remove the hinges from the LCD cover .
Chapter 3 83 LCD Module Reassembly Procedure Replacing the MIC and WiFi Antennas 1. Replace the left and right antennas as shown. Press down on the adhesive pads to secure the antennas in place. 2. Replace the left antenna cable (white) as shown. Ensure that the cables are secu red in the cable guides.
84 Chapter 3 Replacing the FPC Cable 1. Attach the FPC cable to the LCD panel and attach the adhesi ve protector . 6. Replace the adhesive tape onto the microphone ca ble.
Chapter 3 85 2. Press down on the adhesive tape to secure the FPC cable in place. Replacing the LCD Panel 3. Place the LCD Panel into the module as shown.
86 Chapter 3 Replacing the Webcam 1. Place the camer a in the LCD Modu le. 2. Conne ct the cable to the camera module..
Chapter 3 87 Replacing the LCD Bezel 1. Reattach the hinges first, then press down until t here are no gaps between the bezel and th e LCD Modul e. IMPORT ANT : Ensure that the LCD cables pass through th e hinge wells and are not trapped by the bezel.
88 Chapter 3 Main Module Reassembly Procedure Replacing the RTC Battery 1. Snap the RTC battery into its socket as shown, plus side (+) up. Replacing the CPU IMPORT ANT : The CPU has a Pin1 locator that must be pos ition ed corresponding to the marker on the CPU socket.
Chapter 3 89 Replacing the Thermal Module IMPORT ANT : Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module. The following thermal grease type s are approved for use: • Silmore GP50 • Honeywell PC M4 5F -SP • ShinEtsu 7762 The following thermal pads are approved for use: • Eapus XR-PE 1.
90 Chapter 3 Replacing the PCH Thermal Module 1. Replace the PCH Thermal Mo dule onto the Mainboard. 2. Replace the two (2 ) screws to secure the PCH Thermal Module.
Chapter 3 91 3. Replacing the Mainboard Disengage the WiFi antennas from the guides on the bottom 1. Place the Mainboard in the chassis, left edge first (1), then rotate it downward into position (2). NOTE: Ensure the left side I/O ports are positioned correctly through the casing.
92 Chapter 3 Replacing the LCD Module 1. Replace the LCD module onto the chassis. 2. Replace the four securing screws (two each side) to the LCD module. 3. S tarting at the top, sli de your finger down the l eng th of the L V DS cable to reattach the adhesive.
Chapter 3 93 cover . 6. Replace the WLAN cables into the cable guides 4. Snap the FPC cable into place. 5. Connect the right speaker cable..
94 Chapter 3 7. Rest the computer on the back of the LCD as shown. Pull the WiFi antennas through the hole in the chassis as shown. 8. Insert the WLAN cables into the cable guides as shown.
Chapter 3 95 Replacing the Bluetooth Module NOTE: The Bluetooth Module and USB Board can be rep laced independently and in any order. 1. Connect the smaller end of the Blu etooth cable to the Bluetooth Module as shown. 2. Secure the Bluetooth module in place using the one (1) screw .
96 Chapter 3 Replacing the USB Board 1. Replace the USB Board in the Lower Cover . 2. Insert the FFC cable in to the connecto r on the Mainboard and se cure the locking latch. 3. Insert the FFC cable in to the connector on the USB Board and secu re the locking latch .
Chapter 3 97 Replacing the Function Board Replacing the Power Switch Board 1. Replace the Function Board FFC and lock it into place. 2. Place the Function Board in to the Upper Co ver as shown and replace the two (2) screws. 1. Place the Power Switch Board in to the Upper Cover as shown and replace the two (2) screws.
98 Chapter 3 Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover back edge first. 2. Lower the cover into position and press down the sides as shown. 3. Continue pressing a round the edges of the casi ng until there are no gaps between the Upper and Lower Covers.
Chapter 3 99 4. Replace the eight (8) se curing screws as shown. NOTE: The securing screws differ in length: M2.5*5 (red ca llout) and M2.5*3 (green ca llout). Ensure that the correct screw is used to secu re the Upper Cover in place. 5. Connect the four cables to the Mainbo ard as sh own.
100 Chapter 3 6. Connect A as sho wn. 7. Insert B as shown and close the locking latch. 8. Insert C as shown and close the locking latch. 9. Insert D as shown and close the locking latch. 10. T urn the computer over and replace th e fourteen scre ws as shown.
Chapter 3 101 Replacing the Keyboard 1. Place the keyboard face down on the Uppe r Cover. Reconnect keyboard FFCs to the mainboard, and secure the locking latch. 2. Slide the Keyboard front edge first into the Upper Cover , ensuring that the four locating tabs are correctly seated.
102 Chapter 3 Replacing the ODD Module Replacing the Hard Disk Drive Module 1. Press the bezel into the tr ay , bottom edge first, to secure it to the ODD Module. 2. Secure the ODD bracket with the two screws. 3. Push the ODD Module into the ODD bay until it is flush with the casing.
Chapter 3 103 2. Insert the HDD, left side first, and lower it into place. 3. Slide the HDD to the right to connect the interface..
104 Chapter 3 Replacing the WLAN Board Replacing the DIMM Modules 3. Repeat with the seco nd DIMM module if present. 1. Insert the WLAN board in to the WLAN socke t. 2. Replace the one (1) screw to secure the module. 3. Connect the two (2) antenna cables to the module.
Chapter 3 105 Replacing the Lower Covers 1. Replace the HDD Cover as shown. IMPORT ANT : Press down aroun d the perimeter of the cover to ensure that the all the securing tabs are snapped correctly . 2. Secure the five captive screws to hold the covers in place.
106 Chapter 3 Replacing the Dummy Cards Replacing the Battery Pack 1. Insert the SD Dummy Card into the sl ot and push until the card clicks in to place and is fl ush with the casing. 1. Insert the bat tery pack and press down. 2. Slide the battery lock in the direction shown to secure the battery in place.
Chapter 4 107 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
108 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llow ing actions one at a time to correct the problem.
Chapter 4 109 No Display Issue If the Displa y doesn’t work, perform the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
11 0 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 111 LCD Failure If the LCD fails, perform the following actions one at a ti me to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the pro blem.
11 2 Chapter 4 TouchPad Failure If the To u c h P a d doesn’t work, perfo r m the follo wing actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem.
Chapter 4 11 3 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager .
11 4 Chapter 4 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac tions one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
Chapter 4 11 5 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits .
11 6 Chapter 4 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-cl ick on the device and click Enable . b. Double-click DVD/C D-RO M dri ves . If the device displays a down arrow , right-click on the device and click Enable .
Chapter 4 11 7 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable.
11 8 Chapter 4 Wireless Function Failure If the WLAN fails, perform th e following actions one at a time to correct th e probl em. Do not replace a non- defective FRUs: Thermal Unit Failure If the Thermal Unit fails, perform the follo wing actions one at a time to correct the problem.
Chapter 4 11 9 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t th e problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connection, i nsert new batteries and confirm there is a good co nnection.
120 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothin g to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 121 Post Codes These tables describe the POST code s and descriptions durin g th e POST . Code POST Routine Description 02h Ve rify Real Mode 03h Disab le Non-Maskable Interrupt (NMI) 04h Ge.
122 Chapter 4 3Dh Load alternate registers with CMOS values 42h Initialize interrupt vectors 45h POST device in itialization 46h 2-1-2-3 Check RO M copyright notice 48h Check video configu ration agai.
Chapter 4 123 86h Re-initialize onboard I/O ports. 87h Configure Motheboard Configurable Devices (optional) 88h Initialize BIOS Data Area 89h Enable Non-Maskable Interrupts (NMIs) 8Ah Initialize Exten.
124 Chapter 4 BFh Check virus and backup reminders C0h Try to boot with INT 19 C1h Initialize POST Error Manager (PEM) C2h Initialize error logging C3h Initialize error d isplay function Code Beeps PO.
Chapter 5 125 Jumper and Connector Locations Top View Item Description Item Description 1 CN2/LED Board conn. 10 Glide P AD Left SW 2 U2,U3/Dis VRAM 1 1 CN13 Int. SPK. conn. (R) 3 CN6/K/B conn. 12 CN1 0/Card reader conn. 4 Glide P AD FFC conn. 13 U2/LAN control IC 5 Y1/KBC X’tal 14 CN9/BT wire 6 U10/EC/KBC 15 CN8/Int.
126 Chapter 5 Bottom View Item Description Item Description 1 PJ1 Battery conn. 15 CN25/L ine -out/SPDIF 2 U16/U18 Dis VRAM IC. 16 CN24/EXT Mic conn. 3 U24/CPU Socket 17 CN16/USB conn. 4 PJ2/PWR Jack conn. 18 CN9/LAN conn. 5 CN16/ODD conn. 19 U21/L AN transformer 6 U23/System BIOS 20 CN1 5/HDMI conn.
Chapter 5 127 Clearing Password Check and BIOS Recovery This section provides you with the st and ard operating procedures of clearing password and BIOS reco very for the Aspire 4625/462 5G . The machine provides one H ardware Open Gap on main b oard for clearing password check, and one Hotke y for enabling BIOS Reco very .
128 Chapter 5 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
Chapter 6 129 FRU (Field Replaceable Unit) List This chapter gives you the FRU (Field Replaceable Unit) listi ng in global configurations of Aspire 4625/4625G . Refer to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).
130 Chapter 6 Aspire 4625/4625G Exploded Diagrams LCD Assembly No. Description Acer P/N No. Description Acer P/N 1 ZQ1 LCD COVER SUB ASSY (AL/3G) 60.PSR07.003 7 CABLE ASSY ZQ1LCD(19V ,40/ 30P ,WXGA,1A)FOX 50.PSR07.00 2 2 CAMERA CNF915721004970 L H(CMOS, 1.
Chapter 6 131 Chassis Assembly 4 ZQ1 LCD BEZEL SUB ASSY 60.PSR07.004 10 SCREW M2.5*3.0(ZN)(NYLOK) IRON T=0.5‘ 86.PSR07.00 2 5 LCD SCREW MYLAR ZQ1 47.PSR07.004 1 1 HINGE R SZS ZQ1 33.PSR07.003 6 SCREW M2.5*3.0- I(ZN)(NYLOK)IRON T=0.5 86.PSR07.003 No.
132 Chapter 6 7 HDD-BKT ZR6(FBZR6004,REV 3A) 33.EDM07.001 20 Z Q1 MB(SG ,P ARK,SAM,BT ,WO CPU)ASSY 8 HDD(160G)WD1600 BEVT -22A23T0 STN BSQ KH.16008.027 21 WWAN MINICARD EM770W FW:1 1.126.07.02.00 9 33ZQ1UB0000 22 CARD READER DUMMY CARD ZR7(EBZR7009,R3A) 42.
Chapter 6 133 FRU List Category Partname Description P/N Adapter Adapter DEL T A 65W 19V 1.7x5.5x1 1 Y ellow ADP-65 JH DB A, L V5 LED LF Z06 ADP 19V 3.42A ADP-65JH DBA S.P AP .06501.026 Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ell ow P A-1650-22AC L V5 LED LF Z06 ADP 19V 3.
134 Chapter 6 Board Foxconn Wireless LAN Atheros HB93 2x2 BGN (HM) ZY6 W/L 802.1 1 B/ G/N H MINI(T77H047.31) S.P NI.23600.062 TBD ZQ2 W/L MINICARD 802.1 1BGN(T77H16 7.07)S.P TBD Foxconn Wirelss LAN Atheros HB95BG (HM) T77H121.1 0 ZQ2 W/L MINICARD 802.
Chapter 6 135 POWER CORD US 3PIN RO HS ZB1 PWR CORD US S/P 27.T AXV7.001 POWER CORD(EU) 1.8M 3PBLACK FM010008-0 10 ZR1 POWER CORD(EU) 1.8M 3PBLACK S/P 27.T A TV7.001 POWER CORD BRAZIL IMETRO 3 PIN BL3 POWER CORD BRAZIL 3P S/P 27.S0607.001 POWER CORD UK 3PIN ET2S POWER CORD S/P-UK 27.
136 Chapter 6 Case/Cover/Bracket/Assembly UPPER CASE(W/FFC*3,TP ,TP BD,SPK-L) ZQ2B TOP SUB ASSY (JM)S.P 60.PSH07 .001 UPPER CASE(W/FFC*3,TP ,TP BD,SPK-L) W/O TIMELINE LOGO ZQ2B TOP SUB ASSY (JM)CN S.P 60.PSH07.002 LOWER CASE(W/DC JACK,USB CABLE,SPK-R,FOR 65W) ZQ2B BASE SUB ASSY(JM/65W/ WO3G)S.
Chapter 6 137 DVD RW Drive DVD/RW SUPER MU L TI 9.5MM MODULE SM 9.5mm (JM) Module 6M.PSH07.001 ODD TOSHIBA Super-Multi DRIVE 9.5mm T ray DL 8X TS- U633F LF W/O bezel SA T A (HF + Windows 7) ZQ1B DVD/RW/ RAM TS-U633F F/ W:AC00 S.P KU.00801.034 ODD P ANASONIC Super-Multi DRIVE 9.
138 Chapter 6 HDD HGST 2.5" 5400rpm 250GB HTS545025B9A300 Panther B SA T A LF F/W:C60F Disk imbalance criteria = 0.014g-cm ZH7 HDD(250G)HTS545 025B9A300 S.P KH.25007.016 HDD WD 2.5" 5400rpm 320GB WD3200BEVT - 22A23T0,ML320S,WD SA T A 8MB LF F/W:01.
Chapter 6 139 Keyboard Keyboard ACER AC4T_A10B AC4T 86KS Black Arabic T exture ZQ1 K/B(ARAB-EN) S.P KB.I140A.204 Keyboard ACER AC4T_A10B AC4T 87KS Black Belgium T exture ZQ1 K/B(BELGIUM) S.P KB.I140A.205 Keyboard ACER AC4T_A10B AC4T 87KS Black Brazilian Portuguese T exture ZQ1 K/B(BRAZIL) S.
140 Chapter 6 Keyboard ACER AC4T_A10B AC4T 87KS Black S panish T exture ZQ1 K/B(SP ANISH) S.P KB.I140A.223 Keyboard ACER AC4T_A10B AC4T 87KS Black Sweden T exture ZQ1 K/B(SWEDISH) S.P KB.I140A.224 Keyboard ACER AC4T_A10B AC4T 87KS Black Swiss/G T exture ZQ1 K/B(SWISS) S.
Chapter 6 141 LCD Module LCD MODULE ASSY AL W/ MIC,CCD CABLE,WLAN ANTENNA*2 FOR NON-3G LCD AL/WO 3G JM 6M.PSH07.002 LED LCD AUO 14" WXGA Glare B140XW03 V0 LF 200nit 8ms 500:1 (Power saving) ZQ1 LCD 14'' HD B140XW03 V0 (0A) S.P LK.14005.
142 Chapter 6 Mainboard MB AMD UMA W/CARD READER W/O CPU ZQ2B MB(AMD,UMA,W/O CPU)S.P MB.PSS06.001 MB AMD P ARK W/CARD READER W/O CPU ZQ2B MB(AMD,P ARK ,W/ O CPU)S.
Chapter 6 143 Memory Memory ELPIDA SO-DIMM DDRIII 1066 1GB EBJ10UE8BDS0-AE-F LF 128*8 0.065um ZE8 RAM(1GB)DDR3 EBJ10UE8BDS0- AE-F S. P KN.1GB09.012 Memory SAMSUNG SO-DIMM DDRIII 1066 1GB M471B2873EH1-CF8 LF 64*16 0.055um ZR6 RAM(1G)DDR3 M471B2873EH1- CF8 S.
144 Chapter 6 Heat sink THERMAL MODULE - DIS ZQ2 THERMAL MODULE 35W DISS.P 60.PSH07.004 THERMAL MODULE - UMA ZQ2 THERMAL MODULE 35W UMA S.P 60.PSS07.002 HEA T SINK ZQ2 HEA T SINK PCH(FBZQ2005,RE V3A)S. P 60.PSH07.005 SPEAKER - L (IN UPPER CASE) ZQ1B SPK ASSY(WITH L)S.
Chapter 6 145 Screw List Part Name Description P/N Screw ZR6 SCREW M2.5*2-I (NI,NYLOK)IRON S.P 86.EDM07.002 ZA3 SCREW M2.0*3.0- I(BKAG)(NYLOK)IRON SP 86.PSR07.003 ZQ1 SCREW M2.5*3.0-I(ZN) T=0.5 S.P 86.PSR07.00 2 TE1 SCREW M2.0*6.0-I SP 86.S6507.001 SCREW M2.
Appendix A 146 Model Definition and Configuration Aspire 4625/4625G Model RO Country Acer Part No Description AS4625G- P922G32Mn CHINA China LX.PSH0 1.001 AS4625G-P922G32Mn W7HB6 4SCA TCN1 MC P ARK_XT512Cks_3V3 1* 2 G/ 320/BT/6L3.0 /5R/ cb_bgn_1.3C_AL_SC13 AS4625G- P522G50Mn TWN GCTWN LX.
147 Appendix A AS4625G- N834G64Mn AAP Singapore LX.PSH0 2.018 AS4625G-N834G64Mn W7HP64A T SG1 MC P ARK_XT512Cks_3V3 2* 2 G/ 640/BT/6L3.0 /5R/ cb_bgn_1.3C_AL_ZH31 AS4625G- N834G50Mn AAP Singapore LX.PSH0 2.017 AS4625G-N834G50Mn W7HP64A T SG1 MC P ARK_XT512Cks_3V3 2*2G/5 00_L/BT/6L3.
Appendix A 148 AS4625G- N934G64Mn AAP Singapore LX.PSH0 2.001 AS4625G-N934G64Mn W7HP64A T SG1 MC P ARK_XT512Cks_3V3 2* 2 G/ 640/BT/6L3.0 /5R/ cb_bgn_1.3C_AL_ZH31 AS4625G- N934G50Mn WW WW S2.PSH0 C.001 AS4625G-N934G50Mn LINPUSAWW1 P ARK_XT512Cks_3V3 2*2G/5 00_L/6L3.
149 Appendix A AS4625- P924G64Mn AAP Singapore LX.PSS0 2.012 AS4625-P924G64Mn W7HP64A TSG1 MC UMACks_3 2*2G/640/BT/6L3.0/5R/ cb_bgn_1.3C_AL_ZH31 AS4625- P924G50Mn AAP Singapore LX.PSS0 2.01 1 AS4625-P924G50Mn W7HP64A TSG1 MC UMACks_3 2*2G/500_L/BT/6L3.
Appendix A 150 AS4625G- P922G50Mn GCTWN LX.PSH02.024 AS4625G_P ARK_XT512 Cks_3V3 APP920 P ARK_XT AS4625G- P324G32Mn Singapore L X.PSH02.023 AS4625G_P A RK_XT512 Cks_3V3 AAP320 P ARK_XT AS4625G- P524G50Mn Singapore L X.PSH02.022 AS4625G_P A RK_XT512 Cks_3V3 AT P 5 2 0 PA R K _ X T AS4625G- P524G32Mn Singapore L X.
151 Appendix A AS4625G- N934G32Mn Singapore LX.PSH02.003 AS4625 G_P ARK_XT512 Cks_3V3 APN930 P ARK_XT AS4625G- N934G50Mn Singapore LX.PSH02.002 AS4625 G_P ARK_XT512 Cks_3V3 APN930 P ARK_XT AS4625G- N934G64Mn Singapore LX.PSH02.001 AS4625 G_P ARK_XT512 Cks_3V3 APN930 P ARK_XT AS4625G- N934G50Mn WW S2.
Appendix A 152 AS4625- P824G64Mn Singapore LX.PSS02.007 AS4 625_UMACks_3 APP820 UMA AS4625- N534G32Mn Singapore LX.PSS02.006 AS4 625_UMACks_3 A TN530 UMA AS4625- N534G50Mn Singapore LX.PSS02.005 AS4 625_UMACks_3 A TN530 UMA AS4625- N534G64Mn Singapore LX.
153 Appendix A AS4625G- N834G50Mn Singapore LX.PSH02 .017 512M-DDR3 (64*16*4) SO2GBIII10 SO2GBIII10 AS4625G- N834G32Mn Singapore LX.PSH02 .016 512M-DDR3 (64*16*4) SO2GBIII10 SO2GBIII10 AS4625G- N536G64Mn Singapore LX.PSH02 .015 512M-DDR3 (64*16*4) SO4GBIII10 SO2GBIII10 AS4625G- N534G64Mn Singapore LX.
Appendix A 154 AS4625- P323G32Mn ACLA- Sp a n i s h LX.PSS02.01 8 N SO2GBIII10 SO1GBIII10 AS4625- P822G25Mn WW S2.PSS02.003 N SO1G BIII10 SO1GBIII10 AS4625- P822G25Mn WW S2.PSS02.003 N SO1G BIII10 SO1GBIII10 AS4625- N932G32Mn Singapore LX.PSS02.01 7 N SO2GBIII10 N AS4625- N834G32Mn Singapore LX.
155 Appendix A AS4625G-P922G50Mn GCTWN LX.PSH02.024 N500GB5.4KS N SM8XS9.5 AS4625G-P324G32Mn Singapore LX.PS H02.023 N320GB5.4KS N SM8XS9.5 AS4625G-P524G50Mn Singapore LX.PS H02.022 N500GB5.4KS N SM8XS9.5 AS4625G-P524G32Mn Singapore LX.PS H02.021 N320GB5.
Appendix A 156 AS4625-N834G32Mn Singapore LX.P SS02.016 N320GB5.4 KS NSM8XS9.5 AS4625-N832G32Mn Singapore LX.P SS02.015 N320GB5.4 KS NSM8XS9.5 AS4625-N333G32Mn Singapore LX.P SS02.014 N320GB5.4 KS NSM8XS9.5 AS4625-N332G32Mn Singapore LX.P SS02.013 N320GB5.
Appendix B 157 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer’s internal testing department. All of it s system functions are tested under Windows ® 7 environment. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
158 Appendix B Microsoft ® Windows ® 7 Environment Test V end or Ty p e Description Part No. A cover 9999995 ONE TIME VENDER Aluminum Aluminum LZ.21000.006 Adapter 10001023 LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ellow P A-1650-22AC L V5 LED LF AP .
Appendix B 159 HDD 60002162 SIMPLO 6CELL3.0 Battery SIMPLO AS10 B Li-Ion 3S2P SAMSUNG 6 cell 6000mAh Main COMMON ID:AS10B7E BT .00607.128 60002162 SIMPLO 9CELL3.0 Battery SIMPLO AS10 E Li-Ion 3S3P SAMSUNG 9 cell 9000mAh Main COMMON ID:AS10E7E BT .00907.
160 Appendix B 60001922 TOSHIBA DIGI N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB Capricorn BS ,MK3265GSX SA T A 8MB LF F/ W:GJ002J KH.32004.0 04 60001922 TOSHIBA DIGI N500GB5.4KS HDD TOSHIBA 2.5" 5400rpm 500GB MK5065GSX,Capricorn BS, 320G/P SA T A 8MB LF F/W:GJ002J KH.
Appendix B 161 10017383 Atheros AR8151L Athero s AR8151L NI.22400.048 MEM 10001038 CMO NLED14WXGAG S LED LCD CMO 14" WXGA Glare N140B6-L24 LF 200nit 8ms 650:1 (Power saving) LK.1400D.007 60002215 SAMSUNG NLED14WXGAG S LED LCD SAMSU NG 14" WXGA G lare L TN140A T06-A01 LF 200n it 16ms LK.
162 Appendix B 60024207 KINGSTON SO1GBIII13 Memory KINGSTON SO-DIMM DDRIII 1333 1GB ACR128X64D3S1333C9 LF 128* 8 0.065um KN.1GB07.00 4 60024207 KINGSTON SO2GBIII13 Memory KINGSTON SO-DIMM DDRIII 1333 2GB ACR256X64D3S1333C9 LF 128* 8 0.065um KN.2GB07.00 4 Modem 10001023 LITE-ON External USB Lite+LSI modem External USB Lite+LSI modem LC.
Appendix B 163 60002215 SAMSUNG VR1GbIII8 VRAM SAMSUNG Graphic DDRIII 800 1Gb K4W1G1646E-HC12 LF VR.1GB0B.00 6 60002215 SAMSUNG VR2GbIII8 VRAM SAMSUNG Graphic DDRIII 800 2Gb K4W2G1646B-HC12 LF+HF VR.2 GB0B.00 1 WiFi Antenna 10000105 WNC PIF A PIF A LZ.
164 Appendix B.
Appendix C 165 Online Support Information This section describe s online techni cal support services av ailable to help you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office.
166 Appendix C.
167 A AFLASH Utility 36 Antennas 81 B Battery Pack 48 BIOS ROM type 18 vendor 18 Version 18 BIOS Utility 29–36 Advanced 32 Boot 34 Exit 35 Navigating 29 Onboard Device Configur ation 33 Power 34 Sav.
168 N No Display Issue 109 O ODD Failure 115 Online Support Information 165 optical drive module 51 P Panel 7 Bottom 10 PC Card 11 Power On Failure 108 R RTC B at t er y 74 S SD Card 49 System Block D.
Een belangrijk punt na aankoop van elk apparaat Aspire Digital 4625 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Aspire Digital 4625 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Aspire Digital 4625 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Aspire Digital 4625 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Aspire Digital 4625 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Aspire Digital 4625 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Aspire Digital 4625 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Aspire Digital 4625 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
