Gebruiksaanwijzing /service van het product D500 and D1500 van de fabrikant NETGEAR
Ga naar pagina of 114
350 East Plumeria Drive San Jose, C A 95134 USA August 2014 202-11390-01 N150 WiFi DSL Modem Rout er—Essentials Edition Model D500 N300 WiFi DSL Modem Rout er—Essentials Edition Model D1500 User M.
2 N150 and N300 WiFi DSL Modem Rout ers Suppor t Thank you f or selecting NET GEAR products. After inst alling your device, locat e the serial number on the label of your pr oduct and use it to r egist er your pr oduct at https ://my .net gear .com . Y ou must r egister your pr oduct befor e you can use NET GEAR telephone support .
3 Cont ents Chapter 1 Hardware Overview of the Modem Router Unpack Y our Modem R out er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 T op P anel with LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 N150 and N300 WiFi DSL Modem Rout ers Chapter 4 Manage the WiFi Network Settings Manage the Basic WiFi Settings and WiF i Security. . . . . . . . . . . . . . . . . . . . . . . . 49 Configur e WP A / WP A2 Ent erprise WiFi Security . . . . . . . . . .
5 N150 and N300 WiFi DSL Modem Rout ers Chapter 7 Troubleshooting Quick Tips f or T r oubleshoo ting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 T r oubleshoot with the LEDs . . . . . . . . . . . . . . . . . . . .
6 1 1. Har dw ar e Ov er view of the Modem Rout er This manual describes the following models: • NETGEAR ® N150 WiFi DSL Modem Router—Essentials Edition, Model D500. Provides a single antenna with WiFi connection speeds up to 1 150 Mbps. • NETGEAR ® N300 WiFi DSL Modem Router—Essentials Edition, Model D1500.
Hardw ar e Over view of the Modem Router 7 N150 and N300 WiFi DSL Modem Rout ers Unpack Y our Modem Rout er Y our package contains the following items. Power adapter Ethernet cable Phone cable ADSL filter Modem router (varies by region) (varies by region) (N300 shown) Figure 1.
Hardw ar e Over view of the Modem Router 8 N150 and N300 WiFi DSL Modem Rout ers T op P anel with LEDs The modem router displays status LEDs on top. Figure 2. Modem router top view The following table describes the LEDs from right to left. T able 1. LED descriptions LED Icon Description Power • Solid green .
Hardw ar e Over view of the Modem Router 9 N150 and N300 WiFi DSL Modem Rout ers Back P anel with P or ts, DC Connec tor , On /Off Button, and Ant ennas Ethernet Ethernet LAN port 2 Power Power or W A.
Hardw ar e Over view of the Modem Router 10 N150 and N300 WiFi DSL Modem Rout ers Bott om P anel Pr oduc t Label The product label on the bottom panel of the modem router lists the WiFi login information, serial number , and MAC address of the modem router.
11 2 2. Inst all and Acc ess the Modem Rout er and Its Network This chapter describes how you can install and access the modem router and its network. The chapter contains the following sections: • .
Install and Acc ess the Modem Rout er and Its Network 12 N150 and N300 WiFi DSL Modem Rout ers P osition Y our Modem Rout er The modem router lets you access your network anywhere within the operating range of your WiFi network.
Install and Acc ess the Modem Rout er and Its Network 13 N150 and N300 WiFi DSL Modem Rout ers Bef or e Y ou Connec t t o the Modem Rout er During and after installation, you can connect to the modem router’s network through a wired or WiFi connection.
Install and Acc ess the Modem Rout er and Its Network 14 N150 and N300 WiFi DSL Modem Rout ers • WiFi network key or password . Y our modem router is preset with a unique WiFi network name (SSID) and password for WiFi access. This information is on the product label.
Install and Acc ess the Modem Rout er and Its Network 15 N150 and N300 WiFi DSL Modem Rout ers Set Up Y our Modem Rout er f or DSL Ser vice Y ou can install you modem router for DSL service or for cable or fiber (Ethernet W AN) service.
Install and Acc ess the Modem Rout er and Its Network 16 N150 and N300 WiFi DSL Modem Rout ers Cable the Modem Rout er f or DSL Ser vice and Ac ces s the Modem Rout er ADS L Ph o n e Line The following figure shows the cabling of your modem router for DSL service.
Install and Acc ess the Modem Rout er and Its Network 17 N150 and N300 WiFi DSL Modem Rout ers 9. Connect a computer to the modem router by one of the following methods: • Ethernet cable . Use an Ethernet cable to connect your computer to a yellow Ethernet port on the modem router.
Install and Acc ess the Modem Rout er and Its Network 18 N150 and N300 WiFi DSL Modem Rout ers • Clear the browser cache. • If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain an IP address automatically from the modem router.
Install and Acc ess the Modem Rout er and Its Network 19 N150 and N300 WiFi DSL Modem Rout ers Cable the Modem Rout er f or C able or Fiber Ser vice and Acc ess the Modem Rout er The following figure shows the cabling of your modem router for cable or fiber service.
Install and Acc ess the Modem Rout er and Its Network 20 N150 and N300 WiFi DSL Modem Rout ers Y our computer connects to the modem router’s LAN. • WiFi . Connect to the default WiFi network of the modem router: a. On your computer or WiFi device, find and select the WiFi network.
Install and Acc ess the Modem Rout er and Its Network 21 N150 and N300 WiFi DSL Modem Rout ers The NETGEAR genie BASIC home screen displays. 12. Change the default connection method: a. Select ADV ANCED > Setup > W AN Setup . b. From the W AN Preference menu, select Must use Ethernet W AN .
Install and Acc ess the Modem Rout er and Its Network 22 N150 and N300 WiFi DSL Modem Rout ers 15. From the Country menu, select the country in which you use the modem router. 16. Select the Ye s radio button. 17. Click the Next button. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration.
Install and Acc ess the Modem Rout er and Its Network 23 N150 and N300 WiFi DSL Modem Rout ers Log In t o the Modem Rout er Af t er Setup t o View or Change Settings After you set up the modem router for DSL, cable, or fiber service, you can view or change the settings for the modem router by accessing NETGEAR genie.
Install and Acc ess the Modem Rout er and Its Network 24 N150 and N300 WiFi DSL Modem Rout ers Change the Language By default, the language is set as Auto. Y ou can change the language. T o change the language: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
Install and Acc ess the Modem Rout er and Its Network 25 N150 and N300 WiFi DSL Modem Rout ers The BASIC Home screen displays. 5. Select ADV ANCED > Administration > Set Password . The Set Password screen displays. 6. T ype the old password. 7. T ype the new password twice.
26 3 3. Manage the Int ernet Settings Manually This chapter describes how you can manage the Internet settings of the modem router manually . Usually , the quickest way to set up the modem router is to allow the NETGEAR genie automatic setup utility to detect the Internet connection when you first access the modem router with an Internet browser .
Manage the Internet Settings Manually 27 N150 and N300 WiFi DSL Modem Rout ers Use the Int ernet Setup Wizar d Af t er Initial Setup Whether you use DSL service or cable or fiber service, you can use the Setup Wizard to detect your Internet settings and automatically set up your modem router.
Manage the Internet Settings Manually 28 N150 and N300 WiFi DSL Modem Rout ers 8. Click the Next button. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. When you are connected to the Internet, the NETGEAR genie BASIC Home screen displays.
Manage the Internet Settings Manually 29 N150 and N300 WiFi DSL Modem Rout ers Manually Set Up the Int ernet Connec tion Y ou can view or change the modem router’s Internet connection settings manually .
Manage the Internet Settings Manually 30 N150 and N300 WiFi DSL Modem Rout ers 7. Enter the settings that are described in the following table. Field Description Account Name (If Required) Enter the account name provided by your ISP . This name might also be called the host name.
Manage the Internet Settings Manually 31 N150 and N300 WiFi DSL Modem Rout ers 8. Click the Apply button. Y our settings are saved. 9. Click the T est button to test your Internet connection. If the NETGEAR website does not display within one minute, see T roubleshoot the Internet Connection on page 104.
Manage the Internet Settings Manually 32 N150 and N300 WiFi DSL Modem Rout ers T o view or specify the Internet connection settings with a login for PPPoE service: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
Manage the Internet Settings Manually 33 N150 and N300 WiFi DSL Modem Rout ers 7. From the Encapsulation menu, select PPPoE (PPP over Ethernet) . 8. Enter the settings that are described in the following table. Field Description Login Enter the login name that your ISP gave you.
Manage the Internet Settings Manually 34 N150 and N300 WiFi DSL Modem Rout ers 9. Click the Apply button. Y our settings are saved. 10. Click the T est button to test your Internet connection. If the NETGEAR website does not display within one minute, see T roubleshoot the Internet Connection on page 104.
Manage the Internet Settings Manually 35 N150 and N300 WiFi DSL Modem Rout ers 6. In the Does your Internet connection require a login? section, make sure that the Ye s radio button is selected (it is selected by default). 7. From the Encapsulation menu, select PPPoA (PPP over A TM) .
Manage the Internet Settings Manually 36 N150 and N300 WiFi DSL Modem Rout ers 9. Click the Apply button. Y our settings are saved. 10. Click the T est button to test your Internet connection. If the NETGEAR website does not display within one minute, see T roubleshoot the Internet Connection on page 104.
Manage the Internet Settings Manually 37 N150 and N300 WiFi DSL Modem Rout ers • Fixed . For more information, see Set Up an IPv6 Fixed Connection on page 39. • DHCP . For more information, see Set Up an IPv6 DHCP Connection on page 41. • PPP over Ethernet .
Manage the Internet Settings Manually 38 N150 and N300 WiFi DSL Modem Rout ers 5. Select ADV ANCED > Advanced Setup > IPv6 . The IPv6 screen displays. 6. From the Internet Connection T ype menu, select 6to4 T unnel . The screen adjusts. The modem router automatically detects the information in the Router ’ s IPv6 Address On LAN field.
Manage the Internet Settings Manually 39 N150 and N300 WiFi DSL Modem Rout ers 10. (Optional) Change the NA T filtering mode: • Secured . In secured mode, the modem router inspects both TCP and UDP packets. • Open . In open mode, the modem router inspects UDP packets only .
Manage the Internet Settings Manually 40 N150 and N300 WiFi DSL Modem Rout ers T o set up a fixed IPv6 Internet connection: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. T ype http://www.routerlogin.
Manage the Internet Settings Manually 41 N150 and N300 WiFi DSL Modem Rout ers • Primary DNS Server . The primary DNS server that resolves IPv6 domain name records for the modem router. • Secondary DNS Server . The secondary DNS server that resolves IPv6 domain name records for the modem router.
Manage the Internet Settings Manually 42 N150 and N300 WiFi DSL Modem Rout ers 3. Enter the modem router user name and password. The user name is admin . The default password is password . The user name and password are case-sensitive. 4. Click the OK button.
Manage the Internet Settings Manually 43 N150 and N300 WiFi DSL Modem Rout ers Y ou can type the domain name of your IPv6 ISP . Do not enter the domain name for the IPv4 ISP here. For example, if your ISP’s mail server is mail.xxx.yyy .zzz, type xxx.
Manage the Internet Settings Manually 44 N150 and N300 WiFi DSL Modem Rout ers The BASIC Home screen displays. 5. Select ADV ANCED > Advanced Setup > IPv6 . The IPv6 screen displays. 6. From the Internet Connection T ype menu, select PPPoE . The screen adjusts.
Manage the Internet Settings Manually 45 N150 and N300 WiFi DSL Modem Rout ers If your ISP did not provide a service name, leave this field blank. Note: The default setting of the Connection Mode menu is Always On to provide a steady IPv6 connection. The modem router never terminates the connection.
Manage the Internet Settings Manually 46 N150 and N300 WiFi DSL Modem Rout ers Leave the MTU unchanged unless one of these situations occurs: • Y ou experience problems connecting to your ISP or other Internet service, and the technical support of either the ISP or NETGEAR recommends changing the MTU setting.
Manage the Internet Settings Manually 47 N150 and N300 WiFi DSL Modem Rout ers T o change the MTU size: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. T ype http://www.routerlogin.net or http://www .
48 4 4. Manage the WiFi Netw ork Settings This chapter describes how you can manage the WiFi network settings of the modem router. The chapter includes the following sections: • Manage the Basic WiF.
Manage the WiFi Network Settings 49 N150 and N300 WiFi DSL Modem Rout ers Manage the Basic WiFi Settings and WiFi Security Y ou can view or change the basic WiFi settings and WiFi security .
Manage the WiFi Network Settings 50 N150 and N300 WiFi DSL Modem Rout ers 6. View or change the basic WiFi settings and security settings. The following table describes the fields on the Wireless Settings screen.
Manage the WiFi Network Settings 51 N150 and N300 WiFi DSL Modem Rout ers Channel From the Channel menu, select Auto for automatic channel selection or select an individual channel. The default selection is Auto . Note: In some regions, not all channels are available.
Manage the WiFi Network Settings 52 N150 and N300 WiFi DSL Modem Rout ers 7. Click the Apply button. Y our settings are saved. If you connected over WiFi to the network and you changed the SSID, you are disconnected from the network. 8. Make sure that you can reconnect over WiFi to the network with its new settings.
Manage the WiFi Network Settings 53 N150 and N300 WiFi DSL Modem Rout ers Configur e WP A / WP A2 Ent erprise WiFi Security Remote Authentication Dial In User Service (RADIUS) is an enterprise-level method for centralized Authentication, Authorization, and Accounting (AAA) management.
Manage the WiFi Network Settings 54 N150 and N300 WiFi DSL Modem Rout ers 7. In the Security Options (WP A/WP A2 Enterprise) section, enter the settings that are described in the following table. Field Description WP A Mode From the WP A Mode menu, select the enterprise mode: • WP A2 [AES] .
Manage the WiFi Network Settings 55 N150 and N300 WiFi DSL Modem Rout ers 3. Enter the user name and password for the modem router. The user name is admin . The default password is password . The user name and password are case-sensitive. 4. Click the OK button.
Manage the WiFi Network Settings 56 N150 and N300 WiFi DSL Modem Rout ers 9. From the Encryption Strength menu, select the encryption key size: • 64-bit . Standard WEP encryption, using 40/64-bit encryption. • 128-bit . Standard WEP encryption, using 104/128-bit encryption.
Manage the WiFi Network Settings 57 N150 and N300 WiFi DSL Modem Rout ers T o manage the WiFi radio: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network. 2. T ype http://www.routerlogin.net or http://www .
Manage the WiFi Network Settings 58 N150 and N300 WiFi DSL Modem Rout ers Manage Advanc ed WiFi Fe atur es For most WiFi networks, the advanced WiFi features work fine and you do not need to change the settings.
Manage the WiFi Network Settings 59 N150 and N300 WiFi DSL Modem Rout ers 6. Enter the settings that are described in the following table. Field Description Enable 20/40 MHz Coexistence By default, 20/40 MHz coexistence is enabled to prevent interference between WiFi networks in your environment at the expense of the WiFi speed.
Modem router functioning as repeater WiFi router functioning as base station Manage the WiFi Network Settings 60 N150 and N300 WiFi DSL Modem Rout ers Note: If you want to change the modem router’s WiFi settings, use a wired connection to avoid being disconnected when the new WiFi settings take effect.
Manage the WiFi Network Settings 61 N150 and N300 WiFi DSL Modem Rout ers 6. Select the Enable Wireless Repeating Function check box. 7. Click the Check button. The modem router checks for available WiFi networks. The Wireless Repeating Function screen adjusts to show the detected WiFi networks.
62 5 5. Manage the W AN and L AN Network Settings This chapter describes how you can manage the W AN and LAN network settings of the modem router. The chapter includes the following sections: • Mana.
Manage the W AN and L AN Network Settings 63 N150 and N300 WiFi DSL Modem Rout ers Manage the ADSL Settings NETGEAR recommends that you use the NETGEAR genie automatic setup utility to detect the DSL connection and automatically set up the modem router (see Set Up Y our Modem Router for DSL Service on page 15).
Manage the W AN and L AN Network Settings 64 N150 and N300 WiFi DSL Modem Rout ers • ADSL2 . Legacy version of ADSL2. • ADSL2+ . ADSL2+ provides the fastest downstream rates and can interoperate with ADSL2 and ADSL (g.dmt). 7. Click the upper Apply button.
Manage the W AN and L AN Network Settings 65 N150 and N300 WiFi DSL Modem Rout ers 5. Select ADV ANCED > Setup > W AN Setup . The W AN Setup screen displays. 6. From the W AN Preference menu, select one of the following options: • Must use DSL W AN .
Manage the W AN and L AN Network Settings 66 N150 and N300 WiFi DSL Modem Rout ers Manage the W AN Securit y Settings The W AN security settings include port scan protection and denial of service (DoS) protection, which can protect your LAN against attacks such as Syn flood, Smurf Attack, Ping of Death, and many others.
Manage the W AN and L AN Network Settings 67 N150 and N300 WiFi DSL Modem Rout ers 6. T o enable port scan and DoS protection, clear the Disable Port Scan and DoS Protection check box. Note: Enabling port scan and DoS protection might affect the performance of the modem router.
Manage the W AN and L AN Network Settings 68 N150 and N300 WiFi DSL Modem Rout ers 6. T o enable IGMP proxying, clear the Disable IGMP Proxying check box.
Manage the W AN and L AN Network Settings 69 N150 and N300 WiFi DSL Modem Rout ers A login screen displays. 3. Enter the user name and password for the modem router. The user name is admin . The default password is password . The user name and password are case-sensitive.
Manage the W AN and L AN Network Settings 70 N150 and N300 WiFi DSL Modem Rout ers Manage the Application Lev el Gatew ay The Application Level Gateways (ALGs) for the Session Initiation Protocol (SIP) and for the File T ransfer Protocol (FTP) are enabled by default for enhanced address and port translation.
Manage the W AN and L AN Network Settings 71 N150 and N300 WiFi DSL Modem Rout ers 6. T o disable the SIP ALG, select the Disable SIP ALG check box. The SIP ALG is enabled by default. 7. T o disable the FTP ALG, select the Disable FTP ALG check box. The FTP ALG is enabled by default.
Manage the W AN and L AN Network Settings 72 N150 and N300 WiFi DSL Modem Rout ers 6. In the IP Address field, type the LAN IP address for the modem router . 7. In the IP Subnet Mask , type the LAN subnet mask for the modem router. 8. Click the Apply button.
Manage the W AN and L AN Network Settings 73 N150 and N300 WiFi DSL Modem Rout ers 7. Click the Apply button. Y our change is saved. Manage the DHCP Ser ver Addr ess P ool By default, the modem router acts as a Dynamic Host Configuration Protocol (DHCP) server .
Manage the W AN and L AN Network Settings 74 N150 and N300 WiFi DSL Modem Rout ers 6. Make sure that the Use Router as DHCP Server check box is selected. This check box is selected by default. 7. Specify the range of IP addresses that the router assigns: a.
Manage the W AN and L AN Network Settings 75 N150 and N300 WiFi DSL Modem Rout ers The user name is admin . The default password is password . The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays. 5. Select ADV ANCED > Setup > LAN Setup .
Manage the W AN and L AN Network Settings 76 N150 and N300 WiFi DSL Modem Rout ers Set Up a St atic Rout e Y ou can add a static route to a destination IP address and specify the subnet mask, gateway IP address, and metric. T o set up a static route: 1.
Manage the W AN and L AN Network Settings 77 N150 and N300 WiFi DSL Modem Rout ers 7. T o prevent the route from becoming active after you click the Apply button, clear the Active check box. In some situations, you might want to set up a static route but keep it disabled until a later time.
Manage the W AN and L AN Network Settings 78 N150 and N300 WiFi DSL Modem Rout ers Change a St atic Rout e Y ou can change an existing static route. T o change a static route: 1. Launch an Internet browser from a computer or WiFi device that is connected to the network.
Manage the W AN and L AN Network Settings 79 N150 and N300 WiFi DSL Modem Rout ers 4. Click the OK button. The BASIC Home screen displays. 5. Select ADV ANCED > Advanced Setup > Static Routes . The Static Routes screen displays. 6. In the Static Routes table, select the radio button to the left of the route that you want to remove.
Manage the W AN and L AN Network Settings 80 N150 and N300 WiFi DSL Modem Rout ers The UPnP Portmap T able displays the IP address of each UPnP device that is accessing the modem router and which internal and external ports that device opened.
81 6 6. Manage the Modem Rout er and Monit or the T r affic This chapter describes how you can manage the settings for administering and maintaining your modem router and monitor the network.
Manage the Modem Rout er and Monitor the T raffic 82 N150 and N300 WiFi DSL Modem Rout ers Updat e the Firmw ar e of the Modem Rout er The modem router firmware is stored in flash memory . Y ou can check to see if new firmware is available and update the modem router to the new firmware.
Manage the Modem Rout er and Monitor the T raffic 83 N150 and N300 WiFi DSL Modem Rout ers The modem router locates the firmware that was downloaded and begins the update. W ARNING: T o avoid the risk of corrupting the firmware, do not interrupt the upload.
Manage the Modem Rout er and Monitor the T raffic 84 N150 and N300 WiFi DSL Modem Rout ers The user name is admin . The default password is password . The user name and password are case-sensitive. 6. Click the OK button. The BASIC Home screen displays.
Manage the Modem Rout er and Monitor the T raffic 85 N150 and N300 WiFi DSL Modem Rout ers c. Enter the user name and password for the modem router. The user name is admin . The default password is password . The user name and password are case-sensitive.
Manage the Modem Rout er and Monitor the T raffic 86 N150 and N300 WiFi DSL Modem Rout ers 6. Click the Back Up button. 7. Choose a location to store the file on your computer . The name of the backup file is NETGEAR_D500.cfg or NETGEAR_D500.cfg . 8. Follow the directions of your browser to save the file.
Manage the Modem Rout er and Monitor the T raffic 87 N150 and N300 WiFi DSL Modem Rout ers The configuration is uploaded to the modem router. When the restoration is complete, the modem router reboots. This process takes about one minute. W ARNING: T o avoid the risk of corrupting the firmware, do not interrupt the restoration.
Manage the Modem Rout er and Monitor the T raffic 88 N150 and N300 WiFi DSL Modem Rout ers 2. Using a straightened paper clip, press and hold the Reset button for eight seconds. 3. Release the Reset button. The configuration is reset to factory default settings.
Manage the Modem Rout er and Monitor the T raffic 89 N150 and N300 WiFi DSL Modem Rout ers 6. Click the Erase button. The configuration is reset to factory default settings. When the reset is complete, the modem router reboots. This process takes about one minute.
Manage the Modem Rout er and Monitor the T raffic 90 N150 and N300 WiFi DSL Modem Rout ers The user name is admin . The default password is password . The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays.
Manage the Modem Rout er and Monitor the T raffic 91 N150 and N300 WiFi DSL Modem Rout ers IP Address The IP address that the Ethernet LAN port uses. The default IP address is 192.168.0.1. DHCP Displays whether the DHCP server of the modem router is enabled for devices that are attached to the LAN.
Manage the Modem Rout er and Monitor the T raffic 92 N150 and N300 WiFi DSL Modem Rout ers View the T r affic Statistics Y ou can view the traffic statistics for the ports of the modem router, change the polling frequency , and stop traf fic polling. T o view the traffic statistics for the ports of the modem router: 1.
Manage the Modem Rout er and Monitor the T raffic 93 N150 and N300 WiFi DSL Modem Rout ers The following table describes the fields and columns of the Show Statistics pop-up screen. Field or Column Description System Up T ime The time elapsed since the modem router was last restarted.
Manage the Modem Rout er and Monitor the T raffic 94 N150 and N300 WiFi DSL Modem Rout ers View or Change a PPP oE or PPP oA Int ernet Connection Y ou can view information about a PPPoE or PPPoA Internet connection of the modem router and establish or terminate such a connection.
Manage the Modem Rout er and Monitor the T raffic 95 N150 and N300 WiFi DSL Modem Rout ers 7. T o establish the Internet connection when the connection is down, click the Connect button. 8. T o terminate the Internet connection when the connection is active, click the Disconnect button.
Manage the Modem Rout er and Monitor the T raffic 96 N150 and N300 WiFi DSL Modem Rout ers The following table describes the fields of the Connection Status pop-up screen. Field Description IP Address The IP address that is assigned by the ISP to the modem router.
Manage the Modem Rout er and Monitor the T raffic 97 N150 and N300 WiFi DSL Modem Rout ers The user name is admin . The default password is password . The user name and password are case-sensitive. 4. Click the OK button. The BASIC Home screen displays.
Manage the Modem Rout er and Monitor the T raffic 98 N150 and N300 WiFi DSL Modem Rout ers 7. Click the Close Window button. The pop-up screen closes. View Devic es Curr ently on the Network Y ou can view the active wired and WiFi devices in both the network to which the modem router is connected and the modem router network.
Manage the Modem Rout er and Monitor the T raffic 99 N150 and N300 WiFi DSL Modem Rout ers The following table describes the fields on the Attached Devices screen. Field Description # The order in which the device joined the network. IP Address The IP address that the modem router assigned to the device when it joined the network.
100 7 7. T r oubleshooting This chapter provides information to help you diagnose and solve problems you might experience with your modem router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear .com for product and contact information.
T r oubleshooting 101 N150 and N300 WiFi DSL Modem Rout ers Quick Tips f or T roubleshooting The following table includes tips for troubleshooting some common problems. T able 3. Quick tips for troubleshooting Problem Possible Solution Y our network is unresponsive or does not function normally .
T r oubleshooting 102 N150 and N300 WiFi DSL Modem Rout ers T r oubleshoot with the LEDs When you turn on the power , the LEDs light as described here. 1. When power is first applied, the Internet LED lights solid green for about 5 seconds and then turns off.
T r oubleshooting 103 N150 and N300 WiFi DSL Modem Rout ers L AN LED Is Off If the LAN LED for a port does not light when you connect a device, check the following: • The Ethernet cable connections are secure at the modem router and at the hub or device.
T r oubleshooting 104 N150 and N300 WiFi DSL Modem Rout ers T r oubleshoot the Internet C onnec tion If your modem router cannot access the Internet, check the DSL connection, then the W AN TCP/IP connection.
T r oubleshooting 105 N150 and N300 WiFi DSL Modem Rout ers Int ernet LED Is Off If the Internet LED is off, the modem router cannot connect to the Internet.
T r oubleshooting 106 N150 and N300 WiFi DSL Modem Rout ers • Y our ISP might check for your computer ’s host name. Assign the computer host name of your ISP account as the account name. For more information, see Manually Set Up the Internet Connection on page 29.
T r oubleshooting 107 N150 and N300 WiFi DSL Modem Rout ers A login screen displays. 3. Enter the user name and password for the modem router. The user name is admin . The default password is password . The user name and password are case-sensitive. 4.
T r oubleshooting 108 N150 and N300 WiFi DSL Modem Rout ers Changes Ar e Not Sav ed If the modem router does not save the changes you make in the web management interface, do the following: • When entering configuration settings, always click the Apply button before moving to another screen or tab or your changes are lost.
T r oubleshooting 109 N150 and N300 WiFi DSL Modem Rout ers T r oubleshoot Y our Network Using the Ping Utilit y Most network devices and routers contain a ping utility that sends an echo request packet to the designated device. The device then responds with an echo reply .
T r oubleshooting 110 N150 and N300 WiFi DSL Modem Rout ers T est the P ath fr om Y our Comput er t o a R emot e Device After you verify that the LAN path works correctly , test the path from your computer to a remote device: 1. From the Windows toolbar , click the Start button and select Run .
111 A A. Supplement al Inf ormation This appendix covers the following topics: • Factory Settings • T echnical and Environmental Specifications.
Supplemental Inf ormation 112 N150 and N300 WiFi DSL Modem Rout ers F ac tory Settings Y ou can return the modem router to its factory default settings (see Return the Modem Router to Its Factory Default Settings on page 87). The following table shows the factory default settings.
Supplemental Inf ormation 113 N150 and N300 WiFi DSL Modem Rout ers T echnical and Envir onment al Specifications WiFi WiFi radio Enabled SSID name See router label Security WP A2-PSK (AES) See router.
Supplemental Inf ormation 114 N150 and N300 WiFi DSL Modem Rout ers Operating humidity 90% maximum relative humidity , noncondensing Electromagnetic emissions EN 55 022 (CISPR 22), Class B C-T ick N10947 LAN 10BASE-T or 100BASE-TX, RJ-45 WA N 10BASE-T or 100BASE-TX, RJ-45 WiFi Maximum WiFi signal rate complies with the IEEE 802.
Een belangrijk punt na aankoop van elk apparaat NETGEAR D500 and D1500 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NETGEAR D500 and D1500 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NETGEAR D500 and D1500 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NETGEAR D500 and D1500 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NETGEAR D500 and D1500 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NETGEAR D500 and D1500 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NETGEAR D500 and D1500 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NETGEAR D500 and D1500 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
