Gebruiksaanwijzing /service van het product WG302 van de fabrikant NETGEAR
Ga naar pagina of 34
Basic Installation and Configuration 3-1 July 2005 v3.0 Chapter 3 Basic Inst allation and Configuration This chapter describes how to set up your N ETGEAR ProSafe W ireless Acc ess Point 802.11g WG302 for wireless connectivity to your LAN. This basic configuratio n will enable computers with 802.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-2 Basic Installation and Configuration July 2005 v3.0 For best results, place your wireless access point: • Near the center of the area in which your PCs will op erate.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-3 July 2005 v3.0 Default Factory Settings When you first rece ive your WG302, the defau lt factory settings will be set as shown below .
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-4 Basic Installation and Configuration July 2005 v3.0 Underst anding WG302 Wireless Security Options Y our wireless data transmissions can be receiv ed well be yond your walls by anyon e with a compatible adapter .
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-5 July 2005 v3.0 • Use WP A, WP A-PSK, WP A2, or WP A2-PSK. W i-Fi Protected Access (WP A and WP A2) data encryption provides data security .
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-6 Basic Installation and Configuration July 2005 v3.0 2C ONFIGURE LAN AND W IRELESS A CCESS a. Configure the WG302 Ethernet port for LAN access. • Connect to the WG302 by opening your browser and enteri ng http://192.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-7 July 2005 v3.0 • The W eb browser will then di splay the WG302 settings page.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-8 Basic Installation and Configuration July 2005 v3.0 – When the wireless acces s point is connecte d to the Internet,.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-9 July 2005 v3.0 b. Click the W ireless Settings link in the Setup sec tion of the main menu to view the W ireless Settings menu. Figure 3-5: Basic Wi reless Settings menu c.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-10 Basic Installation and Configuration July 2005 v3.0 Note: By default, WG302 is set to with the DHCP client disabled. If your network uses dynamic IP addresses, you will need to change this setting.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-11 July 2005 v3.0 How to Log In to the WG302 Us ing It s Default IP Address 1. 192.168.0.228 is the default IP address of your access point.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-12 Basic Installation and Configuration July 2005 v3.0 Figure 3-7: IP Settings menu • Access Point Name (NetBIOS) Enter a new name for the wireless access po int and clic k Apply to save your changes.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-13 July 2005 v3.0 • Spanning T ree Protocol Spanning T ree Protocol in enabled by default for the wirele ss access point. This provides network traffic optimization in settings with multiple WG302 Access Points.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-14 Basic Installation and Configuration July 2005 v3.0 • Tu r n R a d i o O n . On by default, you can also turn of f the radio to disable access through this device. This can be helpful fo r configuration, network tuning , or troubleshooti ng activities.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-15 July 2005 v3.0 – 1 1b Only - All 802.1 1b wireless stations can be used. 802.1 1g wireless stati ons can still be used if they can opera t e in 80 2.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-16 Basic Installation and Configuration July 2005 v3.0 Underst anding WEP/WP A Security Options The table below identifies the various WEP/WP A security options. A full explanation of these standards is available in Appendix B, “W ireless Networking Basics” .
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-17 July 2005 v3.0 – WP A-PSK and WP A2-PSK : This selection allows clients to use either WP A (with TKIP) or WP A2 (with AES). If selected, encryption must be TKIP + AES.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-18 Basic Installation and Configuration July 2005 v3.0 Before Y ou Change the SSID and WEP Settings For a new wireless network, print this form and fill in the parameters.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-19 July 2005 v3.0 How to Set Up and T est B asic Wireless Connectivity Follow the instructions below to set up and te st basic wireless conne ctivity .
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-20 Basic Installation and Configuration July 2005 v3.0 How to Restrict Wirele ss Access by MAC Address T o restrict access ba sed on MA C addresses, follow these steps: 1.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-21 July 2005 v3.0 4. Choose to use the local MAC address database stor ed on the access point, or use the RADIU S MAC address database stored on a RADIUS server .
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-22 Basic Installation and Configuration July 2005 v3.0 4. Select encryption strength. 5. Y ou can manually or automatically program the four data encryption keys. These va lues must be identical on all PCs and Access Points in your network.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-23 July 2005 v3.0 2. Click Radius Server Settings in the Security menu. Figure 3-12: Radius Server Settings 3. Enter the Radius settings.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-24 Basic Installation and Configuration July 2005 v3.0 • Shared Secr et : This is shared betwe en the W ireless Access Point and the Radius Server while authenticatin g the supplicant.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-25 July 2005 v3.0 6. Choose WP A with Radius from the list. 7. Click Apply to save your settings. How to Configure WP A-PSK Note : Not all wireless adapters support WP A.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-26 Basic Installation and Configuration July 2005 v3.0 How to Configure WP A2 with Radius Note : Not all wireless adapters support WP A2. Furthermore, client software is required on the client.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-27 July 2005 v3.0 3. Enter the Radius settings. • Authentication/Access Control Ra dius Server Configuration : This configuration is required for authentication using Radius.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-28 Basic Installation and Configuration July 2005 v3.0 5. Click WEP/WP A Settings in the Security menu. Figure 3-16: WEP/WP A Settings menu 6. Choose WP A2 with Radius from the list.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-29 July 2005 v3.0 2. Click WEP/WP A Settings in the Security me nu of the WG302. Figure 3-17: WEP/WP A Settings menu 3. Choose WP A2-PSK from the list.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-30 Basic Installation and Configuration July 2005 v3.0 T o configure WP A and WP A2, follow these steps: 1.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-31 July 2005 v3.0 3. Enter the Radius settings. • Authentication/Access Control Ra dius Server Configuration : This configuration is required for authentication using Radius.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-32 Basic Installation and Configuration July 2005 v3.0 5. Click WEP/WP A Settings in the Security menu. Figure 3-19: WEP/WP A Settings menu 6. Choose W AP and WP A2 with Radius from the list.
Reference Manua l for the NETGEAR ProSaf e Wire less Access Point 802.11g WG302 Basic Installation and Configura tion 3-33 July 2005 v3.0 2. Click WEP/WP A Settings in the Security me nu of the WG302. Figure 3-20: WEP/WP A Settings menu 3. Choose WP A-PSK and WP A2-PSK from the list.
Reference Manual for the NETGEAR ProSafe Wireless Access Po int 802.11g WG302 3-34 Basic Installation and Configuration July 2005 v3.0.
Een belangrijk punt na aankoop van elk apparaat NETGEAR WG302 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen NETGEAR WG302 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens NETGEAR WG302 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding NETGEAR WG302 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over NETGEAR WG302 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van NETGEAR WG302 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de NETGEAR WG302 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met NETGEAR WG302 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
