Gebruiksaanwijzing /service van het product 250C van de fabrikant New Transducers
Ga naar pagina of 46
Fishfinder 250/250C high-resolution sonar owner’ s manual (Fishfinder 250C shown).
© Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street Olathe, Kansas 66062, U.S.A. T el. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle Abbey Park Industrial Estate Romsey , SO51 9DL, U.
I NTRODUCTION Thank you for choosing the Garmin ® Fishfinder 250/250C. This product is designed for easy operation and to provide years of reliable service.
T ABLE OF C ONTENTS Introduction .........................................................................iii Product Support ............................................................................. iii Product Registration ......................
G ETTING S T ARTED Packing List Before installing and using your Fishfinder 250/250C, check to see that your package includes the following items. The package part number can be found on the outside of the box. If any parts are missing, contact your Garmin dealer immediately .
G ETTING S T ARTED > T RANSDUCERS 2 Fishfinder 250/250C Owner ’s Manual T ransducers The transducer acts as the eyes and ears of your sonar , transmitting sound waves toward the bottom in a cone shape. Proper transducer selection and installation are important to the operation of your unit.
Installation The Fishfinder 250/250C must be properly installed according to the following instructions to get the best possible performance. T o complete the installation, you need the appropriate fasteners and tools.
G ETTING S T ARTED > I NST ALLA TION 4 Fishfinder 250/250C Owner ’s Manual T o install the swivel-mount bracket: T ools (not included) —Drill, screwdriver (Phillips or standard), and either of the following: • Three #8 (4mm) pan head machine bolts with matching nuts and washers and a 5/32” (5mm) drill bit.
G ETTING S T ARTED > I NST ALLA TION Fishfinder 250/250C Owner ’s Manual 5 T o install the unit on the bracket 1. Align the slot on the back of the unit with the long mounting knob, and slide the unit into place. Y ou may need to adjust the long mounting knob to spread the bracket arms apart.
G ETTING S T ARTED > I NST ALLA TION 6 Fishfinder 250/250C Owner ’s Manual Flush Mounting the Fishfinder 250/250C Unit The Fishfinder 250/250C can be flush mounted on a flat panel. When flush mounting the Fishfinder 250/250C, choose an appropriately sized location for the unit.
G ETTING S T ARTED > I NST ALLA TION Fishfinder 250/250C Owner ’s Manual 7 Connecting the Power/Data Cable The power/data cable connects the Fishfinder 250/250C to a 10-35 V olt DC system and provides interface capabilities for connecting external devices.
G ETTING S T ARTED > I NST ALLA TION 8 Fishfinder 250/250C Owner ’s Manual The Fishfinder 250/250C can be connected to another piece of NMEA compatible electronic equipment, such as a Garmin GPS (Global Positioning System).
(Red) + 10-35 VDC (Black) - Ground (Power/Data) (Blue) Port 1 Data OUT (Brown) Port 1 Data IN (White) Port 2 Data IN (N/C) (Green) Port 2 Data OUT (Y ellow) Alarm Low GPS/NMEA Device RXD + NMEA Device.
.
G ETTING S T ARTED > I NST ALLA TION Fishfinder 250/250C Owner ’s Manual 1 1 Shoot-Thru-Hull Installation T o avoid drilling a hole to mount a thru-hull transducer , a transducer may be secured with epoxy inside a boat (“shoot-thru-hull” installation).
G ETTING S T ARTED > I NST ALLA TION 12 Fishfinder 250/250C Owner ’s Manual T o permanently install the transducer: 1. Lightly sand the surface of the hull and face of the transducer with 400-grit wet or dry sandpaper . 2. Build a dam using strip caulk about 1/4” (6mm) tall.
B ASIC O PERA TION > U SING THE K EYP AD Fishfinder 250/250C Owner ’s Manual 13 B ASIC O PERA TION Using the Keypad ADJ MENU NOTE: Pr ess and r elease a key to activate its primary function. Pr essing and holding a key activates its secondary function (if available).
Numeric data Depth scale Flasher Current adjustment option Fish arches (simulated) Bottom Thermocline Frequency mode B ASIC O PERA TION > U SING THE S ONAR P AGE 14 Fishfinder 250/250C Owner ’s Manual Using the Sonar Page The Sonar page is where your Fishfinder 250/250C becomes a powerful fishfinder/flasher .
Wide beam returns Narrow beam returns Fish symbol B ASIC O PERA TION > U SING THE S ONAR P AGE Fishfinder 250/250C Owner ’s Manual 15 The display may also be set to show a split screen view of a zoomed portion of the sonar , bottom lock (display scaled from the bottom up), or a combination of these options (pages 17-18).
Adjustment window Current option Pointer Current adjustment setting Normal setting area B ASIC O PERA TION > U SING THE A DJUSTMENT M ENU 16 Fishfinder 250/250C Owner ’s Manual Using the Adjustment Menu The Adjustment Menu allows direct access to the settings and features most commonly used on the Sonar page.
2x Zoom view Normal view Depth Line B ASIC O PERA TION > U SING THE A DJUSTMENT M ENU Fishfinder 250/250C Owner ’s Manual 17 Adjustment Options Adjustment Menu The following adjustments can be made from the Adjustment Menu: • Range —sets the display depth range used for viewing.
B ASIC O PERA TION > U SING THE A DJUSTMENT M ENU 18 Fishfinder 250/250C Owner ’s Manual Btm (Bottom) Split ––shows two reduced pictures, the right at the original depth scale and the left showing only sonar returns close to the bottom.
B ASIC O PERA TION > U SING THE A DJUSTMENT M ENU Fishfinder 250/250C Owner ’s Manual 19 250C and black on the Fishfinder 250. When set at Normal or 1-100% , this option can be used to better determine bottom hardness. See page 34 for more information on this feature.
B ASIC O PERA TION > U SING THE A DJUSTMENT M ENU 20 Fishfinder 250/250C Owner ’s Manual Pausing the Sonar Page Y ou may pause the Sonar page to stop it from scrolling.
B ASIC O PERA TION > U SING THE M AIN M ENU Fishfinder 250/250C Owner ’s Manual 21 Using the Main Menu The Main Menu contains the unit settings that usually do not require frequent change. The Main Menu is divided into eight tabs: Graph, T ools, T emp, Alarms, System, Units, Sonar , and T ime.
B ASIC O PERA TION > U SING THE M AIN M ENU 22 Fishfinder 250/250C Owner ’s Manual The following settings are available: • Fish Symbols —controls how the graph shows underwater targets and background information. If the symbols are Off , the unit displays all of the available information about the underwater environment.
B ASIC O PERA TION > U SING THE M AIN M ENU Fishfinder 250/250C Owner ’s Manual 23 T ools T ab The T ools tab controls the display of useful sonar tools. Main Menu—T ools tab The following settings are available: • Flasher— this option activates a graphic flasher representation, displayed on the right side of the graph.
B ASIC O PERA TION > U SING THE M AIN M ENU 24 Fishfinder 250/250C Owner ’s Manual The following selections require the proper NMEA data (pages 8-9) in order to display information in a data field: Bearing , Compass , Course , Distance to Next , Off Course , Pointer , Position , Speed , Time of Day , T rack , T urn , and VMG .
B ASIC O PERA TION > U SING THE M AIN M ENU Fishfinder 250/250C Owner ’s Manual 25 T emp (T emperature) T ab The T emp tab displays the water temperature log (if equipped with a temperature transducer/sensor). The graph reads from right to left, so the most recent temperature measured is displayed on the far right side of the graph.
B ASIC O PERA TION > U SING THE M AIN M ENU 26 Fishfinder 250/250C Owner ’s Manual Sonar alarms: • Fish —sets an alarm/icon to sound/display when the unit detects a fish of the specified symbol size. • Shallow W ater/Deep W ater— sets alarms to sound for when you enter areas of specified depth that are too shallow or too deep.
B ASIC O PERA TION > U SING THE M AIN M ENU Fishfinder 250/250C Owner ’s Manual 27 System T ab The System tab controls various system and interface settings. Main Menu—System tab The following settings are available: • Beeper— controls audible beep.
B ASIC O PERA TION > U SING THE M AIN M ENU 28 Fishfinder 250/250C Owner ’s Manual Units T ab The Units tab defines units of measure. Main Menu—Units tab The following settings are available: • Depth— select units of measure for depth in Feet (ft) , Fathoms (fa) , or Meters (m) .
B ASIC O PERA TION > U SING THE M AIN M ENU Fishfinder 250/250C Owner ’s Manual 29 The following settings are available: • W ater T ype— allows you to select either Fr esh or Salt to ensure accurate readings on the unit. Sound waves travel at different rates through each type.
B ASIC O PERA TION > U SING THE M AIN M ENU 30 Fishfinder 250/250C Owner ’s Manual T o calibrate the water speed: 1. Use the ARROW keys to highlight Calibrate W ater Speed and press ENTER . 2. Bring the boat to a cruising speed. Both the top GPS ground speed and uncalibrated water speed will be shown at the bottom of the calibration window .
B ASIC O PERA TION > U NDERST ANDING S ONAR Fishfinder 250/250C Owner ’s Manual 31 Understanding Sonar If you are unfamiliar with basic sonar or need help determining what appears on the graph, this section may benefit you.
B ASIC O PERA TION > U NDERST ANDING S ONAR 32 Fishfinder 250/250C Owner ’s Manual T ransducer Coverage The area covered by the transmitted sound waves is determined by the cone angle of the transducer and the water depth. Cone angles may vary among different types of transducers.
B ASIC O PERA TION > U NDERST ANDING S ONAR Fishfinder 250/250C Owner ’s Manual 33 Understanding the Graph It is important to understand that the unit does not display a 3-D representation of the underwater environment. The unit can display multiple items at the same time and determine when they were received but not where they originated.
B ASIC O PERA TION > U NDERST ANDING S ONAR 34 Fishfinder 250/250C Owner ’s Manual Whiteline The Fishfinder 250/250C can help you to determine if the bottom is hard or soft. When the sonar soundwaves are reflected back by the bottom, a hard bottom returns a stronger signal than a soft bottom.
B ASIC O PERA TION > U NDERST ANDING S ONAR Fishfinder 250/250C Owner ’s Manual 35 Thermoclines One feature unique to Garmin is See-Thru ® technology . See-Thru technology allows the Fishfinder 250/250C to “see” through thermoclines and locate fish where they live—and fish love thermoclines.
A PPENDIX > P HYSICAL S PECIFICA TIONS , C LEANING AND S TORAGE 36 Fishfinder 250/250C Owner ’s Manual A PPENDIX Physical Specifications Size: 6.1" W x 4.9" H x 2.9" D (15.5 cm x 12.5 cm x 7.4 cm) Weight: 1.1 lbs . (0.5 kg) Display: (Fishfinder 250) 4.
Messages and Alarms The Fishfinder 250/250C uses an on-screen alert message system. Press the ENTER key to acknowledge a message. Battery Alarm— The battery’ s voltage has fallen below the value entered in the Battery Alarm setup. Battery V oltage High— The input voltage is too high; the unit will shut off.
A PPENDIX > S OFTW ARE L ICENSE A GREEMENT , L IMITED W ARRANTY 38 Fishfinder 250/250C Owner ’s Manual Software License Agreement BY USING THE FISHFINDER 250/250C, YOU AGREE T O BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTW ARE LICENSE AGREEMENT .
A PPENDIX > L IMITED W ARRANTY Fishfinder 250/250C Owner ’s Manual 39 number . The unit should be securely packed with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station.
I NDEX 40 Fishfinder 250/250C Owner ’s Manual I NDEX A Accessories 2 Adjustment Menu 16 Advanced Data Fields 23 Alarms 25 Alarms T ab 25 ARROW Keys 13 Automatic Scroll Speed 29 B Background Color 2.
I NDEX Fishfinder 250/250C Owner ’s Manual 41 Reset Odometer 27 Reset Scale 25 S Scale 22 Scroll 19, 20 Scroll Speed 29 Setting an Alarm 26 Set Up T ab 33 Shallow W ater Alarm 26 Simulator 27 Size .
© Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL, U.K. Garmin Corporation No.
Een belangrijk punt na aankoop van elk apparaat New Transducers 250C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen New Transducers 250C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens New Transducers 250C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding New Transducers 250C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over New Transducers 250C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van New Transducers 250C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de New Transducers 250C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met New Transducers 250C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
