Gebruiksaanwijzing /service van het product CT4J01(11) / 6MN55311-01 van de fabrikant Nikon
Ga naar pagina of 147
DIGIT AL CAMERA Ref erence Manual.
.
i Introduction Parts of the Camera Preparing for Shoo ting Using the Camera Shooting Features Using the Menus Connecting the Camera to a TV, Computer, or Printer Reference Section Technical Notes and .
ii Introduction Introduction Thank you for purchasing the Nikon COOLPIX L32 digital camera. Befo re using the camera, please read the informa tion in “For Your Safety” ( A vii-x) and familiarize yourself with the information provided in this manual.
iii Introduction Other Information • Symbols and Conventions To make it easier to find th e information you need, the foll owing symbols and conventions are used in this manual: • SD, SDHC, an d SDXC memory cards are re ferre d to as “memory cards” in this manual.
iv Introduction Information and Precautions Life-Long Learning As part of Nikon’s “Life-Long Learni ng” commit ment to ongoing product support and education, continually updated information is avai lable online at the fo llowing sites: • For users in the U.
v Introduction About the Manuals • No part of the manuals included with this prod uct may be reproduced, transmitted, transcribed, stored in a retrieval sys tem, or tran slated into any language in any form , by any means, without Nikon’s prior written perm ission.
vi Introduction Disposing of Data Storage Devices Please note that deleting images or form atting data storage devices su ch as memory cards or built-in camera memor y does not completely er ase the original image data.
vii Introduction To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety befor e usin g this equipment. Keep thes e safety in structions where all t hose who us e the prod uct will read the m.
viii Introduction Keep out of reach of children Particular care should be taken to prevent infants from putting the batteries or other small par ts into their mouths. Do not remain in contact with the camera, battery charger, or AC adapter for extended periods while the devices are on or in use Parts of the devices become hot.
ix Introduction • Do not immerse in or expose to water. • Do not transport or store with metal objects such as necklaces or hairpins. • Batteries ar e prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the batteries when no charge remains.
x Introduction Use appropriate cables When connecting cables to the inpu t and output jacks, use only the cables provided or sold by Ni kon for the purpose, to maintain complia nce with product regulations. Do not touch the moving parts of the lens Failure to observe this precaution could result in injury.
xi Introduction Notice for Customers in the U.S.A. Federal Communications Commissio n (FCC) Rad io Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
xii Introduction Interface Cables Use the interface cables sold or provided by Nikon f or your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.
xiii Introduction This symbol on the batt eries indicates that the batteries are to be collected separately. The following apply only to users in European countries: • All batteries, whether marked with this symbol or not, are designated for separate collec tion at an appropriate collection point.
xiv Introduction Introduction ............ ............ .............. ............ . ii Read This First ....................................................... ii Attaching the Cam era Strap .................. ............. ii About This Manu al ....
xv Introduction Reference Section . ............ .............. ...... E 1 x (Scene Auto Selector) M ode .............. E 3 Scene Mode (Shooting Suited to Scenes) ............... ...... E 4 Tips and Notes .......... .................. ................
xvi Introduction The Shooting Menu (for A (Auto) Mode) ................... ............. E 43 Image Mode Settings (Image Size and Qu ality) ...................... ..... E 43 White Balance (Adjusti ng Hue) ............ E 45 Continuous Shooting ........
1 Parts of the Camera Parts of the Camera The Camera Body 12 3 4 5 6 7 8 9 10 Lens cover closed 1 Shutter-release bu tton ............. ............... ........ 13 2 Zoom control ...................... ................... ............... 14 f : wide-angle .
2 Parts of the Camera 1 3 4 5 6 7 8 9 10 11 2 14 12 13 1 Monitor ..... ................... .................. ................... ........... 3 2 Speaker ......... ............... .................. ................... E 40 3 Flash lamp ..............
3 Parts of the Camera The information that is displayed changes de pending on the camera’s settings and state of use. By default, information is displayed when the ca mera is first turned on and whe.
4 Parts of the Camera 1 Shooting mode .............. ................... ............... .... 20 2 Macro mode .................... ................... ... 19, E 15 3 Zoom indicator ....... .................. ........... 14, E 15 4 Focus indicator.....
5 Parts of the Camera Playback Mode 1m 0s 1m 0s 999/ 999 999/ 999 1m 0s 1m 0s 9999/9999 9999/9999 9999.JPG 9999.JPG 999/ 999 999/ 999 15/11/2015 12:00 15/11/2015 12:00 15 16 6 9 b a 1 3 12 4 10 11 13 2 5 14 7 8 1 Shooting date and time ...............
6 Preparing for Shooting Preparing for Shooting 1 Open the battery-chamber/memory card slot cover. • Hold the camera upside down to prevent the batteries from falling out. 2 Insert the batteries and memory card. • Confirm that the positive (+) and negative (–) battery terminals are oriented correctly and inse rt the batteries.
7 Preparing for Shooting B Notes About the Batteries • Do not combine old and new batteries or batteries of different makes or type s. • Batteries with the following defects cannot be used: B Form.
8 Preparing for Shooting When the camera is turne d on for the first time, the la nguage-selection scr een and the date and time setting screen for the camera clock are displaye d. • If you exit without setting th e date and time, O will flash when th e shooting scre en is displayed.
9 Preparing for Shooting 4 Use JK to select your home time zone and press the k button. • Press H to turn on daylight saving time ( W is displayed above the map). Press I to turn it off. 5 Use HI to select the date format and press the k button. 6 Set the date and time, and press the k button.
10 Preparing for Shooting 9 Use HI to select Scene auto selector and press the k button. • The camera enters th e shooting mode and you can take ima ges in Scene auto selector mode. • While shooting, you can ch eck the battery level indicator and the number of exposures remaining .
11 Preparing for Shooting C The Auto Off Function • If you do not operate the camera for about 30 se conds, the monitor turns off, the camera enters standby mode, and the power-on lamp flashes. Th e camera turns off after about three minutes in standby mode.
12 Using the Camera Using the Camera 1 Hold the camera steady. • Keep fingers and other objects away from the lens, flash, AF-assist illu minator, microphone , and speaker. • When taking pictures in the “tall” (portrait) orientation, make sure the flash is above the lens.
13 Using the Camera 3 Press the shutter-release button halfway ( A 14). • When the sub ject is in focus, the focus area glows gr een. • Multiple focus areas can glow green. • When you are using digital zoom, the camera focuses on the subject in the center of th e fr ame and the focus a rea is not displayed.
14 Using the Camera Using the Zoom When you move the zoom control, th e zoom lens positio n changes. • To zoom in closer to th e subject: Move to ward g (telephoto) • To zoom out a nd view a larger area: Move t oward f (wide-angle) When you turn the camera o n, the zoom moves to the maximum wide-angle position.
15 Using the Camera B Notes About Scene Auto Selector Mode • Depending upon shooting conditio ns, the camera may not select the desired scene mode. I n this case, select another shooting mode ( E 4, E 7, E 8, E 10). • When the dig ital zoom is in effect, the sh ooting mode icon changes to d .
16 Using the Camera 1 Press the c (playback) button to enter playback mo de. • If you pre ss and hold down the c (playback) button while the camera is turned off, the camera turns on in playback mode. 2 Use the multi selector HIJK to select an image to display.
17 Using the Camera 1 Press the l (delete) button to delete the image currently displayed in the monitor. 2 Use the multi selector HI to select Current image and press the k button. • Current image : The im age currently dis played is dele ted. • Erase select ed images : Multiple images that you select are deleted ( A 18).
18 Using the Camera Operating the Erase Selected Images Screen 1 Use the multi selector JK to select an image to be deleted, and then use H to display c . • To undo th e selection, press I to remove c . • Move the zoom control ( A 1) towar d g ( i ) to switch to full-frame playback or f ( h ) to switch to thumbnail playbac k.
19 Using the Camera You can use the multi selector to se t frequently used functions such as the flash and self-timer. You can set the following functions u sing HIJK in the shooting scree n. • X Flash mode ( E 11) You can select t he flash mode to match the s hooting conditions.
20 Shooting Features Shooting Features The following shooting modes are available. • x Scene auto selector ( E 3) The camera automatica lly selects the opt imum scene mode when you fram e an image, making it even easier to take ima ges using settings that suit the scene.
21 Shooting Features 2 Use the multi selector HI to select a shooting mode and press the k button. Scene auto selector.
22 Shooting Features 1 Display the shooting screen. • Check the re maining amount of m ovie recording time. 2 Press the b ( e movie-record) button to start movie recording.
23 Shooting Features 4 Select a movie in full-frame playback mode and press the k button. • Movies are indicated by the movie options icon. • See “Recording Movies” ( E 38 ) for more i nformation. • See “Playing Back M ovies” ( E 40) for more infor mation.
24 Using the Men us Using the Menus Use the multi se lector and k button to navigate the menu s. The following menus are available. • A Shooting menu ( E 42) Available by pressing the d butt on in the shooting screen. Allows you to change image size and quality, cont inuous shooting settings, etc.
25 Using the Men us • Certain menu options cannot be set depending on the current shoo ting mode or the state of the camera. • When a menu is displayed, you can switc h to shooti ng mode by pressing the shutter- release b utton, A (shooting mode) button, or b ( e movie-record) button.
26 Connecting th e Camera to a TV, Computer, or Print er Connecting the Camera to a TV, Computer, or Printer You can enhance yo ur enjoyment of images and movies by conne cting the camera to a TV, computer, or printer.
27 Connecting th e Camera to a TV, Computer, or Print er Viewing images on a TV E 32 Images and movies capture d with the camera can be viewed on a TV. Connection method: Connect the video and audio plugs of the Audio Video Cable EG-CP14 to the TV’s input jacks.
28 Connecting th e Camera to a TV, Computer, or Print er Install ViewNX 2 to upload, view, edit, and shar e photos and movies. Installing ViewNX 2 An Internet connect ion is required. For system r equirements and o ther informatio n, see the Nikon webs ite for your region.
29 Connecting th e Camera to a TV, Computer, or Print er Transferring Images to the Computer 1 Choose how ima ges will be copied to t he computer. Choose one of the following methods: • SD card slot : If your comp uter is equ ipped with an SD card s lot, the car d can be ins erted directly in the slot.
30 Connecting th e Camera to a TV, Computer, or Print er If a message is displayed pr ompting yo u to choose a prog ram, select Nikon Transf er 2. • When using Windows 7 If the dialog shown at ri ght is displayed, follow the steps be low to sele ct Nikon Transf er 2.
31 Connecting th e Camera to a TV, Computer, or Print er 3 Terminate the connection. • If you are using a card reader or card slot, choose the appropriate op tion in the computer operating sy stem to eject the removable disk corresponding to the memory card , and then remove the card from the card reader or ca rd slot.
32.
E 1 The Reference Section provides detailed info rmation and hints about using the camera. Shooting x (Scene Auto Selec tor) Mode ....... ............ ............... ............. ............... . E 3 Scene Mode (Shooting Suited to Scen es) ........
E 2 Movies Recording Movies ............... ................ ............ ............... ............. ............ ..... E 38 Playing Back M ovies .... ............ ............. ............... ............ ................ ........... E 40 Menu Options Availab le in the Shooting Menus .
E 3 Reference Sect ion The camera au tomatically recognizes the shooting sce ne when you frame a picture, making it easier to take pictures using settings that suit the sce ne. When the camera auto matically recognizes the sho oting scene, the shoot ing mode icon displayed on the shooting screen changes accordingly.
E 4 Reference Sect ion When a scen e is selected , camera set tings are automatically optimiz ed for the selected scene. * The icon of th e last sc ene selected is display ed. 1 The camera focuses on the area in the center of the frame. 2 The camera focuses at infinity.
E 5 Reference Sect ion Tips and Notes d Sports • While the shutter-release button is held all the way down, the camera shoots up to about 6 images continuously at a ra te of about 1.
E 6 Reference Sect ion B Pet Portrait Auto Release • Press the multi sel ector J ( n ) to change the Pet portrait auto release settings. - Y : The shutter is automatically released wh en th e camera dete ct s a dog or cat face. - k : The camera does not release th e shutter automatically, even if a dog or cat face is detect ed.
E 7 Reference Sect ion Effects can be applied to images during shooting. * The icon o f the las t effect selected is displ ayed. • The camera focuses on the area in the center of the fram e. • When Selective color or Cross process is selected, use the multi sel ector HI to select the desired color, and pres s the k button to apply the color.
E 8 Reference Sect ion When the camera detec ts a smiling face, you can ta ke an image automaticall y without pressing the shutter-relea se button (smile timer ( E 48)). You can use the skin softening option to smo oth the sk in tones of human faces. 1 Frame the picture.
E 9 Reference Sect ion Functions Available in Smart Portrait Mode • Flash mode ( E 11) • Self-timer ( E 14) • Exposure compensation ( E 16) • Smart portrait menu ( E 42).
E 10 Reference Sect ion Used for general shooting. Sett ings can be adjusted to suit the shooting conditions and the type of shot you want to capture. • The camera focuses on the area in the center of the fram e.
E 11 Reference Sect ion The functions that are available vary with the shooting m ode ( E 17). Using the Flash When using A (auto) mode and other shooting modes, you can select the flash mode to match the shooting condit ions. 1 Press the multi selector H ( X ).
E 12 Reference Sect ion Available Flash Modes U Auto The flash fires when necessary, such as in dim lighting. • The flash mode icon on the shooting screen is displayed only imme diately after the setting is made . V Auto with red-eye reduct ion Reduce red-ey e in portraits caus ed by the flash ( E 13).
E 13 Reference Sect ion C The Flash Lamp The status of the flash can be confirmed by pressing the shutter- release button halfway. • On: The flash fires whe n you press the shutter-rele ase button all the way down. • Flashing: The flash is charging.
E 14 Reference Sect ion Using the Self-timer The camera is equipped with a self-tim er that releases the shu tter about ten sec onds after you press the shutte r-release button.
E 15 Reference Sect ion Using Macro Mode Use macro mode when taking clos e-up images. 1 Press the multi selector I ( p ). 2 Select ON and press the k button. • If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled.
E 16 Reference Sect ion Adjusting Brightness (E xposure Compensation ) You can adjust overall imag e brightness. 1 Press the multi selector K ( o ). 2 Select a compensation value and press the k button. • To brighten the imag e, set a positive (+) value.
E 17 Reference Sect ion Default Settings Default settings fo r each shoo ting mode are described below. Flash ( E 11) Self-timer ( E 14) Macro ( E 15) Exposure compensa tion ( E 16) x (scene auto selector) U 1 Off Off 2 0.0 Scene b (portrait) V Off Off 3 0.
E 18 Reference Sect ion 1 The camera automatically select s the flash mo de appropriate f or the scene i t has selected. W (off) can be selected manually. 2 The setting cannot be changed. Automatically change s to macro mode when the camera selects Close-up .
E 19 Reference Sect ion Some functions cannot be used with other menu options. Functions That Cannot Be Used Simultaneously Restricted function Option Description Flash mode Continuous ( E 47) When Continuous is selected, the fla sh cannot be used. Blink proof ( E 49) Wh en Blink proof is set to On , the flash cannot be used.
E 20 Reference Sect ion The focus area varie s depe nding on the shooting mode. Using Face Detection In the follow ing shooting modes, the camera uses face detection to a utomatically focus on human faces.
E 21 Reference Sect ion Using Skin Softening When the shutte r is released while using one of the shoot ing modes listed below, the camera detects human face s and processes the image to soft en facial skin tones (up to three fa ces).
E 22 Reference Sect ion Focus Lock Focus lock shoot ing is recommended when the camera does not activate the focu s area that contains the desired subject. 1 Select A (auto) mode ( E 10). 2 Position the subject in the center of the frame and press the shutter- release button halfway.
E 23 Reference Sect ion Moving the zo om control toward g ( i ) in full-frame playback mode ( A 16) zooms in on the image. • You can change the zoom ratio by m oving the z oom control to ward f ( h ) or g ( i ). • To view a different area of the image, press the multi sele ctor HIJK .
E 24 Reference Sect ion Moving the z oom control to ward f ( h ) in full-frame playback mode ( A 16) displays images as thumbnails. • You can change the number of thumbnails di splayed by moving the zoom control toward f ( h ) or g ( i ).
E 25 Reference Sect ion Before Editing Images You can easily edit images on this came ra. Edited copies are saved as separate file s. • Edited copies are saved wit h the same shoot ing date and t ime as the o riginal.
E 26 Reference Sect ion Quick Effects: Changing Hue or Mood 1 Display the image to which you want to apply an effect in full-frame playback mode and press the k button. 2 Use the multi selector HIJK to select the desired effect and press the k button.
E 27 Reference Sect ion D-Lighting: Enhancin g Brightness and Contrast Use the multi selector HI to select OK and press the k button. • The edi ted version is displ ayed on th e right. • To exit without saving the copy, select Cancel a nd press the k button.
E 28 Reference Sect ion Glamour Retouch: Enhancing H uman Faces 1 Use the multi selector HIJK to select the face that you want to retouch and press t he k button. • When only one face is detected, proceed to step 2. 2 Use JK to select the effect, use HI to select the effect level, and press the k button.
E 29 Reference Sect ion 4 Select Yes and press the k button. • An edited copy is created. B Notes About Glamour Retouch • Only one face at a time can be edit ed using the glamour retouch function.
E 30 Reference Sect ion Small Picture: Reducing the Size of an Im age 1 Use the multi selector HI to select the desired copy size and press the k button. • For images taken at an image mode settin g of z 5120×2880 , only 640×36 0 is displayed. 2 Select Yes and press the k button.
E 31 Reference Sect ion Crop: Creat ing a Cropped Copy 1 Move the zoom control to enlarge the image ( E 23). 2 Refine copy composition and press the d button. • Move the zoom control toward g ( i ) or f ( h ) to adjust the zoom ratio. Set a zoom ratio at which u is displaye d.
E 32 Reference Sect ion Connect the camera to a TV using an audio/video cabl e ( E 72) to play back images or movies on the TV. 1 Turn off the camera and connect it to the TV. • Make sure th at the plugs are properly or iented . Do not insert or remove the plugs at an angle when connectin g or disconnecting them.
E 33 Reference Sect ion Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a co mputer. Connecting the Camer a to a Printer 1 Turn off the camera. 2 Turn on the printer. • Check printer settings.
E 34 Reference Sect ion 4 Turn on the camera. • The PictBridge startup screen ( 1 ) is displayed in the camera monitor, followed by th e Print selection screen ( 2 ). Printing Individual Images 1 Connect the camera to a printer ( E 33). 2 Use the multi selec tor to select the de sired image and press the k button.
E 35 Reference Sect ion 4 Select the desired number of copies (up to nine) and press the k button. 5 Select Paper size and press the k button. 6 Select the desired paper size and pres s the k button. • To apply the p aper size setting co nfigured on the print er, select Default as the paper size option.
E 36 Reference Sect ion Printing Multiple Images 1 Connect the camera to a printer ( E 33). 2 When the Print selection screen is displayed, press the d button. 3 Use the multi selector HI to select Paper size and press the k button. • To exit the print menu, press the d button.
E 37 Reference Sect ion 6 When printing is complete, turn the camera off and disconnect the USB cable. Print selection Select images (up to 99) and the number of copies (up to nine) of each. • Use the multi selector JK to select images, and use HI to specify the number of copies to be printed.
E 38 Reference Sect ion • When no memory card is ins erted (i.e., wh en using the camera’s internal memory), Movie options ( E 55) is set to g 480/30p or u 240/30p . f 720/30p cannot be selected. 1 Display the shooting screen. • Check the re maining amount of m ovie recording time.
E 39 Reference Sect ion B Maximum Movie Length Individual mo vie files cann ot exceed 2 GB in size or 29 minu tes in length, even when there is sufficient fr ee space on the memory card fo r longer recordi ng. • The maximum movi e length for a single mov ie is displayed on the shooting screen.
E 40 Reference Sect ion B Camera Temperature • The camera may become warm when s hooting movies for an extended peri od of time or when the camera is used in a hot area. • If the ins ide of the camera becomes ext remely hot when recording movies, t he camera will automatically stop recording.
E 41 Reference Sect ion Functions Available During Playback Playback controls are di splayed in the monitor. The operations listed below can be performed by using the multi selector JK to select a control and then pressing the k button. Function Icon Description Rewind A Hold down the k button to rewind the movie.
E 42 Reference Sect ion The settings listed bel ow can be changed by pressing the d button during shooting. The settings that can be chan ged vary depending on the shooting mode, as shown below.
E 43 Reference Sect ion Image Mode Settings (Image Size and Quality) Select the combination of image size and compre ssion ratio that is used when sav ing images.
E 44 Reference Sect ion C Notes About Image Mode • The image mode setti ng can also be changed in shooting modes other than A (auto) mode. The changed setting is also applied to other shooting mo des. • The setting may not be changed whe n using certain setting s of other functions.
E 45 Reference Sect ion White Balance (Adjusting Hue) Adjust white balance to suit the light source or weat her conditions in order to make the colors in images match what you see with yo ur eyes. • Use Auto under most conditio ns. Change the setting when yo u want to adjust t he hue of the image you are taking.
E 46 Reference Sect ion Using Preset Manual Use the procedure be low to measure the white bal ance value under the light ing used during shooting. 1 Place a white or gray referenc e object under the light ing that will be used during shooting. 2 Use the multi selector HI to select Preset manual in the White balance menu, and press the k button.
E 47 Reference Sect ion Continuous Shooting B Notes About Continuous Shooting • When Continuous is s elected, th e flash ca nnot be us ed . Focus, exposure, and white balan ce are fixed at the values determined with the first image in each series.
E 48 Reference Sect ion • See “Image Mode Se ttings (Image Size an d Quality)” ( E 43) for information about Image mode . Skin Softening The result o f skin softening effect on your subject cannot be confirmed when framing images for shooting. Check the resu lts in playback mode, after taking ima ges.
E 49 Reference Sect ion Blink Proof Enter smart portrait mode M d button M Blink proof M k button Option Description y On The camera automatically release s the shutter twice with every shot and saves one image in which the subject’s eyes are ope n.
E 50 Reference Sect ion • See “Editing Still Images” ( E 25) for information about image editing functions. Slide Show Play back images one by one in an automated “sli de show.” When movie f iles are played back in the slide show, onl y the first frame of ea ch movie is displ ayed.
E 51 Reference Sect ion Protect The camera prot ects selected ima ges from accidenta l deletion. Select images to prot ect or ca ncel protec tion for previously protected images fro m the image selection scre en ( E 52). Note that formatt ing the camera’s internal mem ory or the memory car d permanently dele tes protected files ( E 65).
E 52 Reference Sect ion The Image Selection Screen When an image selectio n screen such as the one shown on the right is displayed while op er ating the camera, follow the procedures desc ribed below to select the images. 1 Use the multi selector JK to select an image.
E 53 Reference Sect ion Rotate Image Specify the orientation in which saved images are displayed during pla yback. Still images can be rotated 90 de grees clockwis e or 90 degrees counterclo ckwise. Select an image from the image selection scre en ( E 52).
E 54 Reference Sect ion Copy (Copy Betw een Internal Memory and Memory Card) Copy images between the internal memory and a memory card. 1 Use the multi selector HI to select a destination option to which images are copied and press the k button. 2 Select a copy option and press the k button.
E 55 Reference Sect ion Movie Options Select the desired movie option to record. • Memory cards (Class 6 or higher) ar e recommended for re cording movies ( F 19). * When no me mory card i s inserted (i.e., wh en us ing the camera’s inte rnal memory), the setting is g 480/30p or u 240 /30p .
E 56 Reference Sect ion Autofocus Mode Set how the camera focuses in movie mode. Enter shooting mode M d button M D me nu icon M Autofocus mode M k button Option Description A Single AF (default setting) Focus is locked when the b ( e movie-record) b utton is pressed to start recording.
E 57 Reference Sect ion Time Zone and Date Set the camera clock. The Setup Menu d button M z menu icon M Time zo ne and date M k button Option Description Date and time • Use JK to select a field and then use HI to set the date and time. • Select the minute fie ld and then press the k button to finish.
E 58 Reference Sect ion Setting the Time Zone 1 Use the multi selector HI to select Time zone and press the k button. 2 Select w Home time zone or x Travel destination and press the k button. • The date and time displayed in th e monitor chang es depending on whether the ho me time zone or travel destination is sel ected.
E 59 Reference Sect ion 4 Use JK to select the time zone. • Press H to enable daylight saving time function , and W is displaye d. Press I to disable the daylight saving time function.
E 60 Reference Sect ion Monitor Settings Photo Info d button M z menu icon M Monitor settings M k button Option Description Photo info Set whether or not to display information i n the monitor.
E 61 Reference Sect ion Framing grid+auto info In addition to information shown with Auto info , a framing grid is displayed to help frame images. The framing gri d is not displayed when recording movies. The current settings or ope ration guide is display ed as in Auto info .
E 62 Reference Sect ion Date Stamp The shooting date and time can be imprinted on the images when shooting, allowing the info rmation to be printed even from printers tha t do not support date printing. B Notes About Date Stamp • Imprinted dates form a permanent part of image data and cannot be deleted.
E 63 Reference Sect ion Electronic VR Select the electronic VR (vibratio n reduction) setting used when shooting. When Auto is selected, electr onic VR is applied according to the shoo ting conditions while R is displayed in the shooting screen ( A 3).
E 64 Reference Sect ion AF Assist Enable or disable the AF-assist illuminator which assis ts autofocus oper ation. Sound Settings d button M z menu icon M AF assis t M k button Option Description a Auto (defaul t settin g) The AF-assist illuminator automaticall y ligh ts up when the subject is dimly lit.
E 65 Reference Sect ion Auto Off Set the amount of time that elapses before the camera enters standby mode ( A 11). You can select 30 s (default sett ing), 1 min , 5 min , or 30 min .
E 66 Reference Sect ion Language Select a language for display of camer a menus and messages . Video Mode Adjust settings fo r connection to a TV. Select from NTSC and PAL . Both NTSC and PAL are standards for anal og color tele vision broadca sting. Reset All When Reset is selected, th e camera’s settings are res tored to their default valu es.
E 67 Reference Sect ion Battery Type To ensure that the ca mera shows the corr ect battery level ( A 10), select the type that matches the batterie s currently in use.
E 68 Reference Sect ion Refer to the table belo w if an error message is displayed. Error Messages Display Cause/Solut ion A Memory card is write protecte d. The write-protec t switch is in th e “lock” posi tion. Slide the write-protec t switch to the “write” position .
E 69 Reference Sect ion Image cannot be modified . Select images that sup port the editing fun ction. E 25, F 13 Cannot record mov ie. A time-out error occurred while saving the movie on the memory card. Select a memory c ard wit h a faster write s peed.
E 70 Reference Sect ion * See the documenta tion provided w ith your printe r for further guidance and in formation. Printer error: check printer st atus.
E 71 Reference Sect ion Images or m ovies are assigned file na mes as fol lows. File Names DSCN0001.JPG Identifier (not shown on camera monitor) Original still images and movies DSCN Small copi es SSC.
E 72 Reference Sect ion * To charge EN-MH2 batterie s, use only Battery Ch arger MH-72 or MH-73. Do not use these battery chargers to char ge any other type of battery. Availability may vary with country or region. See our we bsite or br ochures fo r the late st informat ion.
F 1 Caring for the Product ................... ............... ............. F 2 The Camera .... ............ ............... ............. ............... ............. ............ ................ ......... F 2 Batteries ............. ............ .
F 2 Technical Notes and Index The Camera To ensure continued enj oyment of this Nikon product, observe the precautions described below in addition to the wa rn ings in “For Your Safety” ( A vii - x) when using or stor ing the device. B Do Not Drop The product may m alfunction if subjec ted to strong shock or vibration.
F 3 Technical Notes and Index B Do Not Point the Lens at Strong Light Sources for Extended Periods Avoid pointing the lens at the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause deteri oration of the image sensor, producing a white blur effect in photographs.
F 4 Technical Notes and Index Batteries Be sure to read and follo w the warnings in “For Your Safety” ( A vii-x) before use. B Notes About Using Batter ies • Used batteri es may over heat. Handle with caution. • Do not use batteries beyond their recommen ded expiration date.
F 5 Technical Notes and Index B Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rech argeable Ni-MH batteri es while the y still ha ve some charge remaining, the message Battery exhauste d. may be display ed prematurel y when using th e batteries.
F 6 Technical Notes and Index Memory Cards • Use only Secure Digital memory cards. See “Approv ed Memory Car ds” ( F 19) for recommended memory cards. • Observe the precautions n oted in the documentation included with your memory card. • Do not affix labels or stickers to the memory card.
F 7 Technical Notes and Index Cleaning Do not use alcohol, thinne r, or other volatile chemical s. Storage Turn the camera off when not in use. Be sure th at the power-on lamp is off before putting the camera away. Remove the batteries if the camera will not be used for an extended period.
F 8 Technical Notes and Index If the camera fails to function as expected, check t he list of common proble ms below before consulting your re tailer or Nikon-aut horized service repr esentative. Power, Display, Settings Issues Troubleshooting Proble m Cause/Soluti on A The camera is on but does not respond.
F 9 Technical Notes and Index Monitor is hard to read. • Select Monitor settings > Brig htness in the setup menu and ad just the monitor brigh tness. • The monitor is dirty. Clean the monitor. 24, E 60 F 7 Date and time of recording are not correct.
F 10 Technical Notes and Index Shooting Issues Proble m Cause/Soluti on A Cannot switch to shooting mode. Disconnect the USB cable. 26, 29, E 33 No image captured when the shutter-release button is pressed. • When the camera is in playba ck mode, press the A button or the shutte r-release button.
F 11 Technical Notes and Index Bright specks appear in images captured with flash. The flash is reflecting off particles in the air. Set the flash mode settin g to W (off) . 19, E 12 Flash does not fire. • The flash mode is set to W (off). • A scene mode that restricts the flash is selected.
F 12 Technical Notes and Index Images are too dark (underexposed ). • The flash mode is set to W (off). • The flash wi ndow is blocked. • The subject i s beyond the rang e of the flash. • Adjust exposure compensation. • The subject is backlit.
F 13 Technical Notes and Index Playback Issues Proble m Cause/Soluti on A File cannot be played ba ck. • This camera may not be able to play back images saved with another make or model of digital camera. • This camera cannot play ba ck movies record ed with another make or model of digital c amera.
F 14 Technical Notes and Index Images to be printed are not displaye d. • The memory card contains no im ages. Replace the memory card. • Remove the memory card to pri nt images from the internal memory.
F 15 Technical Notes and Index Nikon COOLPIX L32 Digital Camera Specific ations Type Compact digital camera Number of effective pixels 20.1 million (Image processi ng may reduce the number of effective pixels.) Image sensor 1 / 2.3 -in. type CCD; approx.
F 16 Technical Notes and Index Storage Media Internal memory (approx. 2 5 MB), SD/SDHC/SDXC memory card File syst em DCF and Exif 2.3 compliant File formats Still pictures: JPEG Movies: AVI (Motion-JP.
F 17 Technical Notes and Index • Unless otherwise stated, all fi gures assume fresh LR6/L40 (AA-size ) alkaline batteries and an ambient temperature of 23 ±3°C (73.
F 18 Technical Notes and Index 1 Battery life ma y vary depend ing on condition s of use, such as the interval between shots or the length of time that menu s and images are displayed.
F 19 Technical Notes and Index Approved Memory Ca rds The following Secure Digital (SD) memory cards have been tested and approv ed for use in this camera. • Memory cards with an SD Speed Class rating of 6 or faster are recommended for reco rding movies.
F 20 Technical Notes and Index Trademark Information • Windows is either a registered tradem ark or trademark of Microsoft Corpora tion in the United States and/ or ot her countries. • Mac is a trademark or registe red trademark of Apple Inc. in th e U.
F 21 Technical Notes and Index Symbols g Telephoto ................ ...................... ................... 14 f Wide-angle ...................... ..................... ......... 14 i Playback zoom ........... .................. 16, E23 h Thumbnail playback .
F 22 Technical Notes and Index Cross process o ...................... .................... E7 D Date and time ............................ .......... 8, E57 Date format.. ........................... ............... 9, E57 Date stamp.............. ....
F 23 Technical Notes and Index Movie options ............ ........................... ...... E55 Movie playback .................... ............ 22, E40 Movie recording ............................. . 22, E38 Movie-record button ........ ............
F 24 Technical Notes and Index Slide show .......................... ..................... ..... E50 Slow sync ................. ..................... ................. E12 Small picture ............... ...................... .......... E30 Smart portrait menu.
No rep ro duc t io n i n a ny fo rm o f th i s m an ua l, i n w ho le or in pa r t (e xcep t for brief quotation in critical ar ticles or reviews), may be made without writ- ten authorization from NIKON C ORPORA TION.
Een belangrijk punt na aankoop van elk apparaat Nikon CT4J01(11) / 6MN55311-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nikon CT4J01(11) / 6MN55311-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nikon CT4J01(11) / 6MN55311-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nikon CT4J01(11) / 6MN55311-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nikon CT4J01(11) / 6MN55311-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nikon CT4J01(11) / 6MN55311-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nikon CT4J01(11) / 6MN55311-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nikon CT4J01(11) / 6MN55311-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
