Gebruiksaanwijzing /service van het product Altima Sedan (2015) van de fabrikant Nissan
Ga naar pagina of 440
® 2015 AL TI MA S E D AN OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2015 N IS SAN AL TI MA SE DAN L33-D L33-D Printing : March 2015 (10) Publication No.
Owner’s Manual Supplement The information contained within this supplement revises the “NISSAN Advanced Air Bag System (front seats)” information in the “Safety—Seats, seat belts and supplemental restraint system” section of the 2015 Altima Owner’s Manual: Read carefully and keep in vehicle.
NISSAN Advanced Air Bag System (front seats) 1. T op tether strap anchor 2. Roof-mounted curtain side-impact and rollover supplemental air bag inflators 3. Rear seat belts 4. Roof-mounted curtain side-impact and rollover supplemental air bag 5. Front seat-mounted side-impact supple- mental air bag 6.
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability and may even violate governmental regulations. In addition, damage or performance prob- lems resulting from modifications may not be covered under NISSAN warranties.
If you see this symbol, it means “Do not do this” or “Do not let this happen.” If you see a symbol similar to these in an illustra- tion, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to these indicate movement or action.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone.
I n f o r m a t i o n P r o v i d e d b y :.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. T op tether strap anchor (P . 1-20) 2. Rear seat belts (P . 1-11) 3. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-41) 4. Front seat-mounted side-impact supple- mental air bag (P . 1-41) 5. Head restraints/headrests (P .
1. P ower windows (P . 2-44) 2. P ower moonroof (if so equipped) (P . 2-47) 3. Windshield (P . 8-22) 4. Windshield wiper and washer switch (P . 2-29) 5. Engine hood (P . 3-29) 6. Fog light switch (if so equipped) (P . 2-31) 7. Headlight and turn signal switch (P .
1. Rear window defroster switch (P . 2-31) 2. Interior trunk lid release (P . 3-30) 3. T runk lid (P . 3-30) 4. Opener operation (P . 3-30) 5. Rearview camera (if so equipped) (P . 4-10) 6. Replacing bulbs (P . 8-30) 7. Fuel-filler cap, recommended fuel (P .
1. Interior trunk access (P . 1-2) 2. P ower moonroof (if so equipped) (P . 2-47) 3. Sun visors (P . 3-35) 4. Interior lights, illuminated entry (P . 2-49) 5. HomeLink® Universal T ransceiver (if so equipped) (P . 2-51) 6. Automatic anti-glare rearview mirror (if so equipped) (P .
1. Instrument brightness control/T rip computer reset switch (P . 2-35, P . 2-4) 2. V ents (P . 4-24) 3. Headlight/fog light (if so equipped)/turn signal switch (P . 2-31) 4. Driver supplemental air bag/horn (P . 1-41, P . 2-36) 5. Meters and gauges (P .
22. V ehicle Dynamic Control OFF switch (P . 2-39) T runk opener release switch (P . 3-30) Heated steering wheel switch (if so equipped) (P . 2-38) W arning system switch (if so equipped) (P . 2-38) * Refer to the Navigation System Owner’s manual (if so equipped) See the page number indicated in paren- theses for operating details.
QR25DE engine 1. P ower steering fluid reservoir (P . 8-15) 2. Engine coolant reservoir (P . 8-9) 3. Engine oil filler cap (P . 8-11) 4. Brake fluid reservoir (P . 8-15) 5. Air cleaner (P . 8-21) 6. Fuse block/Fusible links (P . 8-24) 7. Battery (P . 8-17) 8.
VQ35DE engine 1. P ower steering fluid reservoir (P . 8-15) 2. Engine coolant reservoir (P . 8-9) 3. Engine oil filler cap (P . 8-11) 4. Brake fluid reservoir (P . 8-15) 5. Air cleaner (P . 8-21) 6. Fuse block/Fusible links (P . 8-24) 7. Battery (P . 8-17) 8.
W arning light Name Page Anti-lock Braking System (ABS) warn- ing light 2-11 or Brake warning light 2-11 Charge warning light 2-11 Low tire pressure warning light 2-12 Master warning light 2-13 P ower.
1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment (if so equipped) ................................1 - 2 Front power seat adjustment (if so equipped) ...
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward.
FRONT POWER SEA T ADJUSTMENT (if so equipped) Operating tips WARNING Before driving the vehicle, return the seat- back to an upright seating position after manually releasing it. Also, make sure the seat is locked in place. Failure to do so may cause the seat to move in a collision or sudden stop.
Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (if so equipped for driver’s seat) The lumbar support feature provides adjustable lower back support to the driver.
1. Move the front passenger seat to the most forward position. 2. Open the access cover on the rear parcel shelf. 3. Push down on the button 䊊 1 on the rear parcel shelf. 4. Fold down the passenger’s side seatback 䊊 2 . WARNING ● Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position.
Center armrest Pull the armrest down until it rests on the seat cushion. WARNING Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against in- jury in certain rear end collisions. Adjust- able head restraints/headrests must be adjusted properly, as specified in this sec- tion.
● Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock them in a desired adjustment position. ● The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame.
REMOVE Use the following procedure to remove the head restraint/headrest: 1. Pull the head restraint/headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint/headrest from the seat. 4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
SEA T BEL T W ARNING LIGHT Both the driver’s and passenger’s front seats are equipped with a seat belt warning light. The warning light, located on the instrument panel, will show the status of the driver and passenger seat belt. NO TE: The front passenger seat belt warning light will not light up if the seat is not occupied.
Fastening the seat belts 1. Adjust the seat. For additional information, refer to “Seats” in this section. 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle 䊊 2 until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact.
3. Position the lap belt portion low and snug on the hips 䊊 3 as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slack 䊊 4 .
T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer.
WARNING ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.
There are three basic types of child restraint systems: ● Rear-facing child restraints ● Forward-facing child restraints ● Booster seats The proper restraint depends on the child’s size. Generally , infants up to about 1 year and less than 20 lbs (9 kg) should be placed in rear-facing child restraints.
properly , the booster seat should raise the child so that the shoulder belt is properly positioned across the chest and the top, middle portion of the shoulder. The shoulder belt should not cross the neck or face and should not fall off the shoul- der.
– NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the rear seat than in the front seat.
● If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Choose a child restraint that is designed for your child’s height and weight.
– Inspect the lower anchors by insert- ing your fingers into the lower anchor area. Feel to make sure there are no obstructions over the anchors such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the lower an- chors are obstructed.
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts.
REAR-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH For additional information, refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections of this manual before install- ing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.
3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
REAR-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured.
Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. Position the child restraint on the seat.
4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
3. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head restraint/headrest to obtain the correct child restraint fit. If the head restraint/headrest is removed, store it in a secure place.
7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 2 through 6. 䊊 1 T op tether strap 䊊 2 Anchor point Installing top tether strap The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments.
2. Position the top tether strap 䊊 1 over the seatback. 3. Secure the tether strap to the tether anchor point 䊊 2 on the ledge behind the child re- straint. 4. Tighten the tether strap according to the manufacturer’s instructions to remove any slack.
Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be placed in a forward-facing direction only.
4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the ALR mode (child restraint mode) . It reverts to ELR mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.
8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place.
䊊 1 T op tether strap 䊊 2 Anchor point Installing top tether strap The child restraint top tether strap must be used when installing the child restraint with seat belts. First, secure the child restraint with the seat belt. Rear bench seat OUTBOARD SEA TING POSITIONS 1.
Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: – Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach.
● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat is chosen, the vehicle seatback must be at or above the center of the child’s ears.
3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adjust or remove the head restraint/headrest to obtain the correct booster seat fit. If the head restraint/headrest is removed, store it in a secure place.
PRECAUTIONS ON SRS This SRS section contains important information concerning the following systems: ● Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) ● Fr.
WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
ARS1042 ARS1043 ARS1044 1-44 Safety—Seats, seat belts and supplemental restraint system I n f o r m a t i o n P r o v i d e d b y :.
WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained.
WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor.
WARNING ● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured.
NISSAN Advanced Air Bag System (front seats) 1. T op tether strap anchor 2. Roof-mounted curtain side-impact and roll- over supplemental air bag inflators 3. Rear seat belts 4. Roof-mounted curtain side-impact and roll- over supplemental air bag 5. Front seat-mounted side-impact supple- mental air bag 6.
WARNING T o ensure proper operation of the passen- ger’s NISSAN Advanced Air Bag System, please observe the following items. ● Do not allow a passenger in the rear seat to push or pull on the seatback pocket. ● Do not place heavy loads heavier than 2.
crash, depending on the crash severity and whether the front occupants are belted or un- belted. Additionally , the front passenger air bag may be automatically turned off under some con- ditions, depending on the weight detected on the passenger seat and how the seat belt is used.
Status light The front passenger seat is equipped with an Occupant Classification Sensor (weight sensor) that turns the front passenger air bag on or off depending on the weight applied to the front passenger seat.
by the regulations. Failing to properly secure child restraints and to use the ALR mode may allow the restraint to tip or move in a collision or sudden stop.
Steps 1. Adjust the seat as outlined in the “Seats” section of the Owner’s Manual. Sit upright, leaning against the seatback, and centered on the seat cushion with your feet comfort- ably extended to the floor. 2. Make sure there are no objects on the occu- pant’s lap.
● The front seat or seatback is forced back against an object on the seat or floor behind it. ● An object placed under the front passen- ger’s seat. ● An object placed between the seat cushion and center console or between the seat cushion and the door.
● Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave per- manent impressions in the seat. Such objects can damage the seat or Occu- pant Classification Sensors (weight sensors) . This can affect the operation of the air bag system and result in seri- ous personal injury.
● Work on and around the front air bag system should be done by a NISSAN dealer. Installation of electrical equip- ment should also be done by a NISSAN dealer. The Supplemental Restraint System (SRS) wiring harnesses* should not be modified or disconnected.
The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the side air bag. Rear seat passengers should be seated as far away as practical from the door finishers and side roof rails. The side air bags and curtain air bags inflate quickly in order to help protect the occupants.
SEA T BEL TS WITH PRETENSIONERS (front seats) WARNING ● The pretensioners cannot be reused af- ter activation. They must be replaced together with the retractor and buckle as a unit.
1. SRS air bag warning labels (located on the sun visors) SUPPLEMENT AL AIR BAG W ARNING LABELS W arning labels about the supplemental front- impact air bag system are placed in the vehicle as shown in the illustration.
Repair and replacement procedure The front air bags, side air bags, curtain air bags and pretensioners are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light remains illuminated after inflation has occurred.
MEMO Safety—Seats, seat belts and supplemental restraint system 1-61 I n f o r m a t i o n P r o v i d e d b y :.
2 Instruments and controls Instrument panel ...................................2 - 2 Meter and gauges .................................2 - 3 Speedometer and odometer .....................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge .
Console box .................................. 2-43 Grocery hooks ................................ 2-44 Windows ........................................ 2-44 P ower windows ............................... 2-44 Moonroof (if so equipped) ...............
1. Instrument brightness control/T rip com- puter reset switch (P . 2-35, P . 2-4) 2. V ents (P . 4-24) 3. Headlight/fog light (if so equipped)/turn signal switch (P . 2-31) 4. Driver supplemental air bag/horn (P . 1-41, P . 2-36) 5. Meters and gauges (P .
22. V ehicle Dynamic Control OFF switch (P . 2-39) T runk opener release switch (P . 3-30) Heated steering wheel switch (if so equipped) (P . 2-38) W arning system switch (if so equipped) (P . 2-38) * Refer to the Navigation System Owner’s manual (if so equipped) See the page number indicated in paren- theses for operating details.
SPEEDOMETER AND ODOMETER This vehicle is equipped with a speedometer and odometer. The speedometer is located on the right side of the meter cluster. The odometer is located within the vehicle information display Speedometer The speedometer indicates vehicle speed.
T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage.
FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.
Press the button for about 1 second when the ignition switch is placed in the ON position to toggle the compass display 䊊 1 on or off. The display will indicate the direction of the vehicle’s heading.
● If a magnet is located near the com- pass or the vehicle is driven where the terrestrial magnetism is disturbed, the compass display may not indicate the correct direction. ● In places where the terrestrial magne- tism is disturbed, the correction of the direction starts automatically.
● The compass may not indicate the correct compass point in tunnels or while driving up or down a steep hill. (The compass returns to the correct compass point when the ve- hicle moves to an area where the geomag- netism is stabilized.) CAUTION ● Do not install a ski rack, antenna, etc .
Anti-lock Braking System (ABS) warning light Supplemental air bag warning light Overdrive OFF indicator light (if so equipped) or or Brake warning light Cruise main switch indicator light (if so equip.
Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the ABS warning light illuminates and then turns off. This indicates the ABS is opera- tional. If the ABS light comes on while the engine is running, it may indicate the anti-lock braking sys- tem is not functioning properly .
CAUTION ● Do not ground electrical accessories di- rectly to the battery terminal. Doing so will bypass the variable control system and the vehicle battery may not charge completely. For additional information, refer to “Variable voltage control sys- tem” in the “Maintenance and do-it- yourself” section of this manual.
● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under-inflated tires may permanently damage the tires and in- crease the likelihood of tire failure.
Seat belt warning light and chime The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition switch is placed in the ON or ST ART position and remains illuminated until the driver’s seat belt is fastened.
Front passenger air bag status light The front passenger air bag status light ( ) will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used.
Overdrive OFF indicator light (if so equipped) QR25DE: The overdrive off indicator light illuminates when the overdrive off mode is selected. VQ35DE: This light illuminates and then turns off when the ignition switch is placed to the ON position.
AUDIBLE REMINDERS Brake pad wear warning The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard.
HOW T O USE THE VEHICLE INFORMA TION DISPLA Y The vehicle information display can be changed using the buttons and ENTER located on the steering wheel. 1. — navigate through the items in ve- hicle information ENTER — change or select an item in the vehicle information display 2.
Driver Assistance (if so equipped) T o change the status, warnings or turn on or off any of the systems/warnings displayed in the “Driver Assistance” menu: Use the button to select and the ENTER b.
Auto Door Unlock The auto door unlock function automatically un- locks all the doors when the shift lever is placed in the P (Park) position. From the V ehicle Settings menu, select “ Auto Door Unlock”. Use the EN- TER button to enable/disable this function.
Body Color The color of the vehicle that displays in the ve- hicle information display when the ignition switch is placed in the ON position can be changed. 1. scheduled service: oil and oil filter 2. tires 3. other Maintenance The maintenance mode allows you to set alerts for the reminding of maintenance intervals.
WARNING The tire replacement indicator is not a substitute for regular tire checks, includ- ing tire pressure checks. For additional information, refer to “Changing wheels and tires” in the “Maintenance and do-it- yourself” section of this manual.
Units The units that are shown in the vehicle informa- tion display can be changed: ● Mileage ● Tire pressures ● T emperature Use the , , and the ENTER buttons to select and change the units of the vehicle infor- mation display. The units of the navigation screen can be changed independently of the vehicle information display.
VEHICLE INFORMA TION DISPLA Y W ARNINGS AND INDICA T ORS 1. No K ey Detected 2. Key ID Incorrect 3. Shift to Park 4. Push ignition to OFF 5. Key battery low 6. Engine start operation for Intelligent Key sys- tem 7. Release parking brake 8. Low Fuel 9.
12. Timer Alert – Time for a driver break? 13. Low Outside T emperature 14. Power will turn off to save the battery 15. CVT Error: See Owner’s Manual 16. Reminder: T urn OFF headlights 17. Low Oil Pressure: See Owner’s Manual 18. Key Registration Complete 19.
Low Washer Fluid This warning illuminates when the windshield- washer fluid is at a low level. Add windshield- washer fluid as necessary. For additional informa- tion, refer to “Windshield-washer fluid” in the “Maintenance and do-it-yourself” section of this manual.
Push to start This warning appears in the vehicle information display when the vehicle has been started using the remote start function. T o start the vehicle, apply the brake and place the ignition switch in the ON position. Loose Fuel Cap This warning appears when the fuel-filler cap is not tightened correctly after the vehicle has been refueled.
4. Confirm that the security indicator light comes on. The security light stays on for about 30 seconds. The vehicle security sys- tem is now pre-armed. After about 30 sec- onds the vehicle security system automati- cally shifts into the armed phase. The security light begins to flash once every 3 seconds.
NO TE: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment.
If the windshield wiper operation is interrupted by snow or ice, the wiper may stop moving to protect its motor. If this occurs, turn the wiper switch to the OFF position and remove the snow or ice that is on and around the wiper arms. In approximately 1 minute, turn the switch on again to operate the wiper.
T o defrost the rear window glass and outside mirrors (if so equipped) , start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes.
● The life of xenon headlights will be shortened by frequent on-off opera- tion. It is generally desirable not to turn off the headlights for short intervals (for example, when the vehicle stops at a traffic signal) . Even when the daytime running lights are active (Canada only) , the xenon headlights do not turn on.
HEADLIGHT CONTROL SWIT CH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on.
NO TE: Autolight activation sensitivity and the time delay for autolight shutoff can be adjusted. For additional information, refer to “V e- hicle information display” in this section. T o turn on the autolight system: 1. T urn the headlight switch to the AUT O posi- tion 䊊 1 .
DA YTIME RUNNING LIGHT S Y STEM (Canada only) The headlights automatically illuminate at a re- duced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position.
Lane change signal 䊊 2 Move the lever up or down until the turn signal begins to flash, but the lever does not latch, to signal a lane change. Hold the lever until the lane change is completed. Move the lever up or down until the turn signal begins to flash, but the lever does not latch, and release the lever.
The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off.
The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below approximately 68°F (20°C) . Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on.
twice and the BSW indicator light will flash. For additional information, refer to “Blind Spot Warn- ing (BSW) System/Lane Departure Warning (LDW) System” in the “Starting and driving” sec- tion.
The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 volt, 120W (10A) maximum. The power outlets are powered only when the ignition switch is in the ACC or ON position. Open the lower half of the console box to access the power outlet.
MAP POCKETS SEA TBACK POCKETS (if so equipped) The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder.
CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses. CUP HOLDERS The rear center cup holders are located in the rear fold-down armrest.
Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. GL OVE BOX Open the glove box by pulling the handle.
Lower half Pull up on the passenger’s side latch to open the lower half of the console box. A power outlet is located inside the console box. GROCER Y HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag.
1. Window lock button 2. P ower door lock switch 3. Front passenger side switch 4. Right rear passenger side switch 5. Left rear passenger side switch 6. Driver side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows.
Rear power window switch The rear power window switches open or close only the corresponding windows. T o open the window , push the switch and hold it down 䊊 1 .T o close the window, pull the switch up 䊊 2 . Locking passengers’ windows When the window lock switch is depressed, only the driver’s side window can be opened or closed.
1. Place the ignition switch in the ON position. 2. Press and hold the driver’s window switch down until the window opens completely. 3. Release the switch. 4. Pull and hold the driver’s window switch up to the second detent until the window glass has reached the full close position.
If the moonroof does not operate properly after performing the procedure above, have your ve- hicle checked by a NISSAN dealer. Auto-reverse function (when closing or tilting down the moonroof) The au.
䊊 1 The interior light can be turned ON regard- less of door position. The light will go off after a period of time unless the ignition switch is placed in the ON position when any door is opened. 䊊 2 The interior lights can be set to operate when the doors are opened.
T o turn the rear personal lights on, press the switch. T o turn them off, press the switch again. Push the button to turn the map lights on. T o turn them off, press the button again. CAUTION Do not use for extended periods of time with the engine stopped.
The HomeLink® Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink® Universal T ransceiver: ● Will operate most Radio Frequency devices such as garage doors, gates, home and of- fice lighting, entry door locks and security systems.
2. Using both hands, simultaneously press and hold the desired HomeLink® button and hand-held transmitter button. DO NO T re- lease until the HomeLink® indicator light 䊊 1 flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released.
PROGRAMMING HOMELINK® FOR CANADIAN CUST OMERS AND GA TE OPENERS Canadian radio-frequency laws require transmit- ter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink® to pick up the signal during training.
CLEARING THE PROGRAMMED INFORMA TION The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed. For additional informa- tion, refer to “Reprogramming a single HomeLink® button” in this section.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent Key® . .......................3 - 2 NISSAN Vehicle Immobilizer System keys .........3 - 4 Doors .......................................
1. Intelligent Key (2 sets) 2. Mechanical key 3. K ey number plate (1 plate) NISSAN INTELLIGENT KEY® Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent Key system components and NISSAN V e- hicle Immobilizer System components.
● Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV , audio equipment and personal computers. If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key from the vehicle.
For additional information, refer to “Storage” in the “Instruments and controls” section and “Seats” in the “Safety — seats, seat belts and supplemental restraint system” section.
P ower The power door lock system allows you to lock or unlock all doors at the same time. T urning the key toward the front 䊊 1 of the vehicle locks all doors.
L OCKING WITH POWER DOOR L OCK SWIT CH T o lock all the doors without a key , push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊 1 . When locking the door this way , be certain not to leave the key inside the vehicle.
CHILD SAFETY REAR DOOR L OCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the unlock position 䊊 2 , the door can be opened from the outside or the inside.
In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. If the battery is dis- charged, replace it with a new one.
OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 䊊 1 .
● T o prevent the Intelligent K ey from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open.
NO TE: ● Request switches for all doors and trunk can be deactivated when the I-K ey Door Lock setting is switched to OFF in the Vehicle Settings of the vehicle information display. For additional information, refer to “V ehicle information display” in the “Instruments and controls” section.
● When the Intelligent Key is placed in- side the door pockets. ● When the Intelligent Key is placed on or under the spare tire area. ● When the Intelligent Key is placed in- side or near metallic materials. Unlocking doors 1. Carry the Intelligent Key .
The interior light timer illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position. The interior light can be turned off without waiting by performing one of the following operations: ● Placing the ignition switch in the ON posi- tion.
CAUTION When locking the doors using the Intelli- gent Key, be sure not to leave the key in the vehicle. Locking doors 1. Place the ignition switch in the LOCK posi- tion. 2. Close all doors. 3. Press the button on the Intelligent Ke y. 4. The hazard warning lights flash twice and the horn beeps once.
Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors and trunk. NO TE: The unlocking operation can be changed in Selective door unlock in the Vehicle Set- tings of the vehicle information display.
Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch (if so equipped) is in the OFF position.
Answer back horn feature If desired, the answer back horn feature can be deactivated using the Intelligent Key . When it is deactivated and the L OCK button is pushed, the hazard indicator lights flash twice. When the UNL OCK button is pushed, nei- ther the hazard indicator lights nor the horn op- erates.
TROUBLESHOO TING GUIDE V erify the location of all Intelligent K eys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected.
Symptom Possible Cause Remedy When pushing the ignition switch to start the engine The Key low battery indicator appears in the display. The battery charge is low. Replace the battery with a new one. (For additional information, refer to “Battery” in the “Maintenance and do-it-yourself” section.
WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed.
CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function.
Locking doors 1. Place the ignition switch in the LOCK posi- tion. 2. Close all doors. 3. Press the button on the Intelligent Ke y. 4. The hazard warning lights flash twice and the horn beeps once.
NO TE: The unlocking operation can be changed in Selective door unlock in the Vehicle Set- tings of the vehicle information display. For additional information, refer to “V ehicle in- formation display” in the “Instruments and controls” section of this manual.
Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the Intelligent K ey for longer than 0.5 seconds. The panic alarm and headlights will stay on for a period of time.
W ARNING SIGNALS T o help prevent the vehicle from moving unex- pectedly by erroneous operation of the Intelligent K ey or to help prevent the vehicle from being stolen, a chime or buzzer sounds from inside and outside the vehicle and a warning is displayed in the instrument panel.
Symptom Possible Cause Remedy When pushing the ignition switch to start the engine The Key low battery indicator appears in the display. The battery charge is low. Replace the battery with a new one. (For additional information, refer to “Battery” in the “Maintenance and do-it-yourself” section.
The button will be on the NISSAN Intelli- gent K ey® if the vehicle has remote engine start. This feature allows the engine to start from out- side the vehicle. The following features may be affected when the remote start feature is used: ● V ehicles with a manual climate control sys- tem will default to the last used heating or cooling mode.
The following events will occur when the engine starts: ● The parking lights will turn on and remain on as long as the engine is running. ● The doors will be locked and the climate control system may come on. ● The engine will continue to run for 10 min- utes.
● The brake is pressed. ● The doors are not closed and locked. ● The trunk or back door is open. ● The I–Key Indicator Light remains solid in the vehicle information display. ● The alarm sounds due to illegal entry into the vehicle. ● T wo remote vehicle starts, or a single remote start with an extension, have already been used.
OPENER OPERA TION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. For addi- tional information, refer to “Exhaust gas (carbon monoxide)” in the “Starting and driving” section of the manual.
NO TE: Request switches for all doors and trunk can be deactivated when the I-Key Door Lock setting is switched to OFF in the Ve- hicle Settings of the vehicle information display. For additional information, refer to “V ehicle information display” in the “In- struments and controls” section of the manual.
T o open the trunk from the inside, pull the illumi- nated release handle until the lock releases and push up on the trunk lid. The release handle is made of a material that glows in the dark after a brief exposure to ambient light. The handle is located inside the trunk compart- ment on the interior of the trunk lid.
● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. T o reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling.
L OOSE FUEL CAP warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following: 1.
TIL T OPERA TION Pull the lock lever down 䊊 1 and adjust the steer- ing wheel up or down 䊊 2 to the desired position. Push the lock lever up 䊊 1 firmly to lock the steering wheel in place. TELESCOPIC OPERA TION Pull the lock lever down 䊊 1 and adjust the steer- ing wheel forward or backward 䊊 3 to the desired position.
V ANITY MIRRORS T o access the vanity mirror, pull the sun visor down and flip open the mirror cover. Some vanity mirrors are illuminated and turn on when the mirror cover is open. REARVIEW MIRROR (if so equipped) Use the night position 䊊 1 to reduce glare from the headlights of vehicles behind you at night.
T ype A (if so equipped) , T ype B (if so equipped) and T ype C (if so equipped) The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the button for inside mirrors without compass and without HomeLink® Universal T ransceiver.
OUTSIDE MIRRORS WARNING ● Do not adjust the mirrors while driving. Y ou could lose control of your vehicle and cause an accident. ● Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right.
4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 4 How to use the touch-screen . . ..................4 - 5 How to use the BACK button ..
FM/AM/SA T radio with compact disc (CD) player (T ype B) (if so equipped) ................. 4-62 USB (Universal Serial Bus) connection port (models without Navigation System) (if so equipped) ............................... 4-68 USB (Universal Serial Bus) connection port (models with Navigation System) (if so equipped) .
Ending a call ................................. 4-106 T ext messaging ............................... 4-107 Bluetooth® settings .......................... 4-108 Manual control ............................... 4-109 Bluetooth® Hands-Free Phone System with Navigation System (if so equipped) .
WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.
9. CAMERA button 10. NA V button* * For additional information regarding the Naviga- tion system control buttons, refer to the separate Navigation System Owner’s Manual.
T ouch-screen operation Menu Item Result Selecting the item T ouch an item to select . T o select the “Audio” key, touch the “ Audio” key on the screen. T ouch the “BACK” key to return to the previous screen. Adjusting the item T ouch the “+” key or the “ ⫺ ” key to adjust the settings of an item.
T ouch-screen maintenance If you clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or de- tergent. Dampen the cloth first and then wipe the screen.
Menu item Result Audio Refer to “ Audio system” in this section for additional information. Navigation Refer to the separate Navigation System Owner’s Manual for additional information. Phone & Bluetooth Refer to “Bluetooth® Hands-Free Phone System with Navigation System” in this section.
Menu item Result T emperature Unit T ouch this key to change the temperature unit being displayed (Fahrenheit or Celsius) . T ouchscreen click T oggles the touch-screen click feature on or off. When activated a click sound will be heard every time a key on the screen is touched.
When the shift lever is shifted into the R (Re- verse) position, the monitor display shows the view to the rear of the vehicle. WARNING Failure to follow the warnings and instruc- tions for proper use of the RearView Monitor could result in serious injury or death.
HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle bumper line 䊊 A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. ● Red line 䊊 1 : approx.
the hill is the place 䊊 B . Note that any object on the hill is further than it appears on the monitor. Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance.
Backing up near a projecting object The vehicle may seem to nearly clear the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course. Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display .
For vehicles with Navigation System 1. When the car is in P (park) , press the [ ] button. 2. T ouch the SETTINGS key. 3. T ouch the SY STEM key. 4. Select CAMERA SETTINGS.
When the shift lever is shifted into the R (Re- verse) position, the monitor display shows view to the rear of the vehicle. Available views: ● Rear View An approximately 150–degree view of the rear of the vehicle. ● Rear-Wide View An approximately 180–degree view of the rear of the vehicle.
HOW T O SWIT CH THE DISPLA Y 䊊 A : Original screen before the RearView Monitor is operated 䊊 B : Rear-wide view screen 䊊 C : Rear view screen 䊊 1 : Shift lever is moved into the R (Reverse) po.
Rear view Guiding lines which indicate the vehicle width and distances to objects with reference to the bumper line 䊊 A are displayed on the monitor. Distance guide lines: Indicate distances from the bumper. ● Red line 䊊 1 : approx. 1.5 ft (0.5 m) ● Y ellow line 䊊 2 : approx.
V ehicle width guide lines 䊊 5 : Indicates the vehicle width when backing up. HOW T O P ARK WITH PREDICTED COURSE LINES WARNING ● Always turn and check that it is safe to do so before backing up. Always back up slowly. ● Use the displayed lines as a reference.
3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines.
when the vehicle is on a level, paved surface. The distance viewed on the monitor is for reference only and may be different than the actual distance between the vehicle and displayed objects. When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance.
Backing up near a projecting object The vehicle may seem to nearly clear the object in the display. However, the vehicle may hit the object if it projects over the actual backing up course. Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display .
● It may take some time until the RearView Monitor is displayed after the shift lever has been shifted to R (Reverse) . Objects may be distorted momentarily until the RearView Monitor screen is displayed completely . When the shift lever is returned to a position other than R (Reverse) , it may take some time until the screen changes.
T urning the MOD system on or off The MOD system is turned on or off using the settings menu in the vehicle information display . A blue MOD icon is displayed if the MOD is operative. A gray MOD icon is displayed if the MOD is not operative. 1. Press the button until “Settings” dis- plays in the vehicle information display.
Camera Maintenance If dirt, rain or snow accumulates on the camera, the MOD system may not operate properly. Clean the camera. Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them.
1. Fan speed control / system OFF dial / air conditioning (A/C) button 2. Air flow control buttons 3. T emperature control dial / MAX A/C button 4. Air recirculation button 5.
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
The air conditioner cooling function oper- ates only when the engine is running. Rear window and outside mirror (if so equipped) defroster button For additional information, refer to “Rear window and outside mirror (if so equipped) defroster switch” in the “Instruments and controls” section of this manual.
2. T urn the fan control dial to the desired posi- tion. 3. T urn the temperature control dial to the de- sired position between the middle and the hot position. ● When the position is selected, the air conditioner automatically turns on if the out- side temperature is more than 36°F (2°C) .
● After parking in the sun, drive for 2 or 3 min- utes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly . ● The air conditioning system should be operated for approximately 10 minutes at least once a month.
LHA2285 LHA2286 4-30 Monitor, climate, audio, phone and voice recognition systems I n f o r m a t i o n P r o v i d e d b y :.
LHA2287 LHA2288 Monitor, climate, audio, phone and voice recognition systems 4-31 I n f o r m a t i o n P r o v i d e d b y :.
1. (front defroster) button 2. T emperature control dial (driver’s side)/ AUT O (automatic) climate control but- ton 3. Display screen 4. T emperature control dial (passenger’s side)/DUAL (passenger’s side tempera- ture control) button 5. Fresh air intake button 6.
NO TE: ● Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compartment through the vents. ● When parking, set the heater and air condi- tioner controls to turn off air recirculation to allow fresh air into the passenger compart- ment.
Remote start logic (if so equipped) V ehicles equipped with automatic climate con- trols and remote start function may go into auto- matic heating or cooling mode when remote start is activated depending on outside and cabin tem- peratures.
The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner.
Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response.
Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player. ● Trying to load a CD with the CD door closed could damage the CD and/or CD player. ● Only one CD can be loaded into the CD player at a time.
Compact disc with MP3 or WMA T erms ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files.
● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software.
T roubleshooting guide Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty . Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
USB (Universal Serial Bus) Connection P ort (if so equipped) WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury.
Bluetooth® streaming audio ● Some Bluetooth® audio devices may not be recognized by the in-vehicle audio system. ● It is necessary to set up the wireless con- nection between a compatible Bluetooth® audio device and the in-vehicle Bluetooth® module before using the Bluetooth® audio.
FM/AM RADIO WITH COMP ACT DISC (CD) PLA YER (T ype A) (if so equipped) For all operation precautions, refer to “ Audio op- eration precautions” in this section. 1. CD eject button 2. CD insert slot 3. SCAN button 4. DISP (display) button 5. RPT (repeat)/RDM (random) button 6.
When no CD is loaded, the radio comes on. Pressing the (power) button again turns the system off. T urn the VOL (volume) control knob to the right to increase volume or to the left to decrease volume.
Press the FM button to change the band as follows: FM1 → FM2 → FM1 If another audio source is playing when the FM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (ST) illuminates during FM stereo reception.
(When the last track on the compact disc is skipped, the first track is played.) When the TRACK button is pressed, the track being played returns to the beginning. Press the TRACK button several times to skip back several tracks. Each time the button is pressed the CD moves back one track.
FM/AM RADIO WITH COMP ACT DISC (CD) PLA YER (T ype B) (if so equipped) For all operation precautions, refer to “ Audio op- eration precautions” in this section. 1. CD eject button 2. CD button 3. Display screen 4. CD insert slot 5. SEEK button 6. SCAN button 7.
Audio main operation (power) button / VOL (volume) con- trol knob: Place the ignition switch in the ACC or ON position and press the (power) button while the system is off to call up the mode (radio, CD, AUX, Bluetooth® audio, USB or iP od®) that was playing immediately before the system was turned off.
iPod® MENU button This button can only be used for iPod® opera- tions. Refer to “iPod® player operation without Navigation System” later in this section for details about the function of this button.
SEEK/TRACK (Reverse or Fast Forward) button: Press and hold the SEEK button or TRACK button for 1.5 seconds while the com- pact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forward- ing.
Additional features For additional information about the iP od® player available with this system, refer to “iPod® player operation without Navigation System” in this sec- tion.
5. SEEK button 6. SCAN button 7. TRACK button 8. BACK button 9. APPS button 10. ENTER/SETTING button / TUNE/FOLDER knob 11. Station select (1 - 6) buttons 12. RDM (random) button 13. RPT (repeat) button 14. (power) button / VOL (volume) control knob 15.
Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level.
APPS button Press the APPS button to launch the Smartphone Integration Mode. Refer to “NissanConnect SM Mobile Apps” in this section for additional informa- tion about using this feature. For additional information on connecting your phone, refer to the “Bluetooth® Hands-Free Phone system without Navigation” section.
SEEK/TRACK (Reverse or Fast Forward) button: Press and hold the SEEK button or TRACK button for 1.5 seconds while the com- pact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forward- ing.
Additional features For additional information about the iP od® player available with this system, refer to “iPod® player operation without Navigation System” in this sec- tion.
5. SEEK button 6. SCAN button 7. CA T button 8. BACK button 9. APPS button 10. ENTER/SETTING button / TUNE/SCROLL knob 11. Station select (1 - 6) buttons 12. RDM (random) button 13. RPT (repeat) button 14. (power) button / VOL (volume) control knob 15.
Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level.
APPS button Press the APPS button to launch the Smartphone Integration Mode. Refer to “NissanConnect SM Mobile Apps” in this section for additional informa- tion about using this feature. For additional information on connecting your phone, refer to the “Bluetooth® Hands-Free Phone system without Navigation (T ype B)” sec- tion.
2. T une to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly muted. 3. The channel indicator will then come on and the sound will resume.
RDM (random) button When the RDM button is pressed while a com- pact disc is playing, the play pattern can be changed as follows: CD: 1 Disc Random ←→ OFF CD with MP3 or WMA: 1 Disc Random → 1 Folder Random → OFF 1 Disc Random: all tracks on the disc will be played randomly.
FM/AM/SA T RADIO WITH COMP ACT DISC (CD) PLA YER (T ype B) (if so equipped) For all operation precautions, refer to “ Audio op- eration precautions” in this section. 1. POWER button / VOL (volume) control knob 2. CD eject button 3. CD insert slot 4.
Audio main operation POWER button/VOL (volume) control knob: Place the ignition switch in the ACC or ON position, and then push the POWER button while the system is off to call up the mode (radio or CD) which was playing immediately before the system was turned off.
SXM settings: T o view the SXM settings: 1. Press the [ ] button. 2. T ouch the “Settings” key . 3. T ouch the “SXM” key . The signal strength, activation status and other information are displayed on the screen.
1 to 6 Station memory operations: T welve stations can be set for the FM band (6 for FM1, 6 for FM2) and six stations can be set for the AM band. Eighteen stations can be set for the SXM band (6 for SXM1, 6 for SXM2 and 6 for SXM3) .
T o program a Smart Favorite preset: 1. Press the SXM button. 2. T ouch the “Setup” key . 3. T ouch the “T une Start” key to activate (ON) or deactivate (OFF) Smart Favorites.
REWIND/ FAST FORWARD T o rewind/ fast forward a track, hold the or seek/track button. Compact disc (CD) player operation If the radio is already operating, it automatically turns off and the compact disc begins to play.
SEEK/TRACK (Reverse or Fast Forward) buttons: Press and hold the SEEK button or TRACK button for 1.5 seconds while the com- pact disc is playing to reverse or fast forward the track being played. The compact disc plays at an increased speed while reversing or fast forward- ing.
CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
The current play pattern of the USB device is displayed on the screen unless no pattern is applied. RPT (repeat) button When the RPT button is pressed while an audio file on the USB device is playing, the play pattern can be changed as follows: 1 Folder Repeat → 1 T rack Repeat → OFF 1 T rack Repeat: the current track will be re- peated.
CAUTION ● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. ● Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
Press the TRACK button while an audio file on the USB device is playing to advance one track. Press the TRACK button several times to skip forward several tracks. If the last track in a folder on the USB device is skipped, the first track of the next folder is played.
iP od®* PLA YER OPERA TION WITHOUT NA VIGA TION S Y STEM (if so equipped) Connecting iP od® WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an acci- dent or serious injury.
● iP od® nano - 5th generation (firmware ver- sion 1.0.2 or later) ● iP od® nano - 6th generation (firmware ver- sion 1.1 or later) ● iP od® T ouch - 2nd generation (firmware version 4.2.1 or later) ● iP od® T ouch - 3rd generation (firmware ver- sion 5.
1 T rack Repeat: the current track will be re- peated. All Repeat: all songs in the current list are re- peated. Repeat Off: no repeat play pattern is applied.
While connected to the vehicle, the iPod® can only be operated by the vehicle audio controls. T o disconnect the iPod® from the vehicle, re- move the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iPod®. * iPod® is a trademark of Apple Inc.
Interface: The interface for iP od® operation shown on the vehicle’s audio system display screen is similar to the iP od® interface. Use the touch-screen, BACK button or the TUNE/SCROLL knob to navigate the menus on the screen. When the iPod® is playing, touch the “Menu” key to bring up the iPod® interface.
SEEK/TRACK buttons: Press the SEEK button or TRACK button to skip backward or forward one track. Press and hold the SEEK button or TRACK button for 1.5 seconds while a track is playing to reverse or fast forward the track being played. The track plays at an increased speed while reversing or fast forwarding.
4. When prompted for a PIN, enter “1234” from the handset. The PIN “1234” has been assigned by NISSAN and cannot be changed. Audio main operation T o switch to the Bluetooth® audio mode, press the AUX button repeatedly until the Bluetooth® audio mode is displayed on the screen.
Connecting Bluetooth® audio T o connect your Bluetooth® audio device to the vehicle, follow the procedure below: 1. Press the button. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key. 4. T ouch the “Connect New Device” key.
CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth.
Push the source select switch to change the mode in the following sequence: AM → FM → CD* → USB/iPod®* (if so equipped) → Bluetooth® Audio* (if so equipped) → AUX* → AM. * These modes are only available when compat- ible media storage is inserted into the device or connected to the system.
CAUTION ● Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation. ● Be sure that the antenna is removed before the vehicle enters an automatic car wash. ● Be sure to fold down the antenna be- fore the vehicle enters a garage with a low ceiling.
APPLICA TION DOWNL OAD Once connected, the NissanConnect SM Mobile Apps will search your phone to determine which compatible applications are currently installed. The vehicle will then download the in-vehicle interface for each of these compatible applica- tions.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the ve- hicle.
IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
● In most cases you can interrupt the voice feedback to speak the next command by pressing the button on the steering wheel. ● T o use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press the button and after the tone say , “Call Redial.
CONTROL BUTT ONS The control buttons for the Bluetooth® Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a command at once.
NO TE: Y ou must press the button within 5 seconds to change the language. 5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed. Connecting procedure NO TE: The connecting procedure must be per- formed when the vehicle is stationary.
four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Number” . For additional informa- tion, refer to “How to say numbers” in this section. 5. When you have finished speaking the phone number, the system repeats it back and an- nounces the available commands.
(Speak Digits) 䊊 B When prompted by the system, say the number you wish to call. For additional information, refer to “How to say numbers” and “Making a call by entering a phone number” in this section. “Special Number” 䊊 C For dialing more than 10 digits or any special characters, say “Special Number”.
“Phonebook” (phones without automatic phonebook download function) NO TE: The “Transfer Entry” command is not avail- able when the vehicle is moving.
“Phonebook” (phones with automatic phonebook download function) NO TE: The “Transfer Entry” command is not avail- able when the vehicle is moving.
“Call Back” 䊊 D Use the Call Back command to dial the number of the last incoming call to the vehicle. “Redial” 䊊 E Use the Redial command to dial the number of the last outgoing call from the vehicle. “Connect Phone” NO TE: The Add Phone command is not available when the vehicle is moving.
VOICE ADAPT A TION (V A) MODE V oice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy . By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system.
● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five o.
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the ve- hicle.
IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
● If you want to adjust the volume of the voice feedback, press the volume control switches (+ or -) on the steering wheel while being provided with feedback.
CONNECTING PROCEDURE NO TE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. T o connect a phone to the Bluetooth® Hands- Free Phone System: 1.
VOICE COMMANDS V oice commands can be used to operate the Bluetooth® Hands-Free Phone System. Press the button and say “Phone” to bring up the phone command menu.
● Missed Calls Speak this command to list the last five missed calls to the vehicle. If the call is from an entry in the phonebook, the name will be displayed. Otherwise, the phone number of the missed call will be displayed. Say “Dial” to call the number or “Send T ext” to send a text message to that number.
● “Phone Number” — Speak this command to place a call by inputting numbers. For 7– to 10–digit phone number, speak the numbers. Say “Correction” at any time in the process to correct a misspoken or misinterpreted number. For phone numbers with more dig- its or special characters, say “Special Num- ber” , then speak the digits.
TEXT MESSAGING WARNING ● Laws in some jurisdictions may restrict the use of “T ext-to-Speech.” Check lo- cal regulations before using the feature. ● Laws in some jurisdictions may restrict the use of some of the applications and features, such as social networking and texting.
5. Once a recipient is chosen, the system prompts for which message to send. Five predefined messages are available as well as three custom messages. T o choose one of the predefined messages, speak o.
● Delete Phone or Device Select to delete a phone from the displayed list. The system will ask to confirm before deleting the phone. ● Replace Phone Select to replace a phone from the displayed list. When a selection is made, the system will ask to confirm before proceeding.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time.
2. this device must accept any interference, including interference that may cause unde- sired operation of the device. IC Regulatory information – Operation is subject to the following two con- dit.
5. Initiate the connecting process from the handset. The system will display the mes- sage: “Is PIN XXXXXX displayed on your Bluetooth device?” . If the PIN is displayed on your Bluetooth® device, select “Y es” to complete the pairing process.
TEXT MESSAGING WARNING ● Laws in some jurisdictions may restrict the use of “T ext-to-Speech” . Check lo- cal regulations before using this feature. ● Laws in some jurisdictions may restrict the use of some of the applications and features, such as social networking and texting.
● “Where are you?” ● “When?” T o send one of the custom messages, say “Custom Messages”. If more than one cus- tom message is stored, the system will prompt for the number of the desired cus- tom message. For additional information on setting and managing custom text mes- sages, refer to “Bluetooth® settings” in this section.
BLUET OO TH® SETTINGS T o access the phone settings: 1. Press the [ ] button. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key. Menu Item Result Phone Settings Refer to “Phone settings” in this section for additional information.
PHONE SETTINGS T o access the phone settings: 1. Press the [ ] button. 2. T ouch the “Settings” key . 3. T ouch the “Phone & Bluetooth” key.
The NISSAN V oice Recognition system allows hands-free operation of the systems equipped on this vehicle, such as the phone and navigation systems. T o operate NISSAN Voice Recognition, press the button located on the steering wheel. When prompted, speak the command for the system you wish to activate.
Operating tips T o get the best performance out of NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.
BLUET OO TH® HANDS-FREE PHONE S Y STEM VOICE COMMANDS T o access the Bluetooth® Hands-Free Phone System voice commands: 1. Press the button. 2. Say “Call” and then a name in the vehicle phonebook to call that entry . Otherwise, say “Phone” to access various phone com- mands.
NA VIGA TION S Y STEM VOICE COMMANDS The following voice commands are available for the Navigation System: ● Street Address (address) ● P oints of Interest (name) ● POI by Category ● Home ● .
HELP VOICE COMMANDS The following voice commands can be spoken to have the system provide instructions and tips for using the NISSAN V oice Recognition system. ● List Commands ● What Can I Say? ● General Help ● Quit ● Exit TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty.
MEMO Monitor, climate, audio, phone and voice recognition systems 4-123 I n f o r m a t i o n P r o v i d e d b y :.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover .
Freeing a frozen door lock ...................... 5-39 Antifreeze ..................................... 5-39 Battery ....................................... 5-39 Draining of coolant water ....................... 5-39 Tire equipment . . ...............
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) .
● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting.
3. When the designated pressure is reached, the horn beeps once and the hazard indica- tors stop flashing. 4. Perform the above steps for each tire. ● If the tire is over-inflated more than ap- proximately 4 psi (30 kPa) , the horn beeps and the hazard indicators flash three times.
4. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 5. If there is nothing in the way, steer the ve- hicle to follow the road while vehicle speed is reduced. Do not attempt to drive the ve- hicle back onto the road surface until vehicle speed is reduced.
NISSAN is committed to safe driving. However, you must choose not to drive under the influence of alcohol. Every year thousands of people are injured or killed in alcohol-related collisions.
The ignition lock is designed so that the ignition switch position cannot be switched to OFF until the shift lever is moved to the P (Park) position. When the ignition switch cannot be pushed to- ward the OFF position, proceed as follows: 1. Move the shift lever into the P (Park) posi- tion.
ACC (Accessories) This position activates electrical accessories, such as the radio, when the engine is not running. ACC has a battery saver feature that will turn the ignition switch to the OFF position after a period of time under the following conditions: ● all doors are closed.
3. T ouch the ignition switch with the Intelligent K ey as illustrated. (A chime will sound.) After Step 3 is performed, when the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change to ACC. 4. Push the ignition switch while depressing the brake pedal within ten seconds after the chime sounds.
1. Apply the parking brake. 2. Move the shift lever to P (Park) or N (Neu- tral) . P (Park) is recommended. The starter is designed not to operate if the shift lever is in any of the driving positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the igni- tion switch to start the engine.
CONTINUOUSL Y V ARIABLE TRANSMISSION (CVT) WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neu- tral) to R (Reverse) , D (Drive) , Ds (Drive Sport) or manual shift mode (if so equipped) . Always depress the brake pedal until shifting is completed.
NO TE: Engine power may be automatically re- duced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers. Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift lever out of the P (Park) position.
R (Reverse) CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position.
When canceling the manual shift mode, return the shift lever to the D (Drive) position. The trans- mission returns to the normal driving mode. When you pull the paddle shifter (if so equipped) while in the D (Drive) position, the transmission will shift to the upper or lower range temporarily.
Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed. It will be necessary to jump start or have your battery charged.
Overdrive (O/D) mode OFF switch (if so equipped) When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the light in the instrument panel illuminates. For addi- tional information, refer to “Overdrive off indicator light” in the “Instruments and controls” section of this manual.
1. T o engage, firmly depress the foot brake. 2. T o release: ● Move the shift lever to the P (Park) posi- tion. ● Firmly depress the parking brake pedal and it will release. ● Before driving, be sure the brake warning light goes out. WARNING ● Be sure the parking brake is fully re- leased before driving.
The BSW/LDW systems use the rear view moni- tor camera unit 䊊 1 with automatic washer and blower. WARNING ● The BSW system is not a replacement for proper driving procedure and is not designed to prevent contact with ve- hicles or objects.
Detection zone The camera unit can detect vehicles on either side of your vehicle when part of another vehicle is within the detection zone shown as illustrated. This detection zone typically starts from the out- side mirror of your vehicle and extends approxi- mately 10 ft (3.
2. Select “Driving Aids”, and press the ENTER button. 3. T o set the BSW system to on or off, use the buttons to navigate in the menu and use the ENTER button to select or change an item: ● Select “Blind Spot” and press the ENTER button.
The Blind Spot indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane. However, if the overtaking vehicle is traveling much faster than your vehicle, the indicator light may not illuminate before the detected vehicle is beside your vehicle.
If the driver activates the turn signal while another vehicle is in the detection zone, then the Blind Spot indicator light flashes and a chime will sound twice.
T urning on or off the LDW system The LDW system is turned on or off using the settings menu in the vehicle information display . S Y STEM ON: The LDW light on the instrument panel will light up. S Y STEM OFF: The LDW light on the instrument panel will go out.
BSW/LDW TEMPORAR Y DISABLED ST A TUS Under the following condition, the BSW and/or LDW system is turned off temporarily , the BSW light and/or LDW light will blink, and either of the following message.
PRECAUTIONS ON CRUISE CONTROL 1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch ● If the cruise control system malfunctions, it cancels automatically. The SET indicator light in the instrument panel then blinks to warn the driver.
The cruise control is automatically canceled if: ● you depress the brake pedal while pushing the ACCEL/RES or SET/COAST switch. The preset speed is deleted from memory . ● the vehicle slows down more than 8 MPH (13 km/h) below the set speed. ● you move the shift lever to N (Neutral) .
Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use Smooth Accelerator and Brake Pedal Application ● Avoid rapid starts and stops. ● Use smooth, gentle accelerator and brake application whenever possible.
● K eep your engine tuned up. ● Follow the recommended scheduled main- tenance. ● K eep the tires inflated to the correct pres- sure. Low tire pressure increases tire wear and lowers fuel economy . ● K eep the wheels in correct alignment. Im- proper alignment increases tire wear and lowers fuel economy.
● HEADED DOWNHILL WITH CURB: 䊊 A T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. ● HEADED UPHILL WITH CURB: 䊊 B T urn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb.
The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. BRAKE PRECAUTIONS V acuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal.
– When installing a spare tire, make sure that it is the proper size and type as specified on the Tire and Loading Information label. Refer to “Tire and Loading Information label” in the “T echnical and consumer informa- tion” section of this manual.
The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and ve- hicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: ● Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.
● Do not modify the vehicle’s suspension. If suspension parts such as shock ab- sorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly.
● If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extremely deteriorated, the VDC system may not operate properly and the VDC warning light may illuminate. ● If engine control related parts are not NISSAN recommended or are extremely deteriorated, the VDC warning light may illuminate.
the tone will sound for only three seconds. Once the system detects an object approaching, the tone will sound again. The RSS automatically turns on when the shift lever is placed in R (Reverse) and the ignition switch is ON.
● The system may not detect the follow- ing objects: Fluffy objects such as Snow, Cloth, Cotton, Glass-wool, etc ., Thin objects such as rope, wire and chain, etc .
The system indicators 䊊 A will appear when the vehicle moves closer to an object. FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the Intelligent Key .
3. Tire chains may be used. For additional in- formation, refer to “Tire chains” in the “Main- tenance and do-it-yourself” section of this manual.
T o use the engine block heater: 1. T urn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet.
MEMO 5-42 Starting and driving I n f o r m a t i o n P r o v i d e d b y :.
6 In case of emergency Hazard warning flasher switch ......................6 - 2 Emergency engine shut off .........................6 - 2 First aid kit (if so equipped) .........................6 - 3 Flat tire .........................................
Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road.
A first aid kit is located in the trunk. T o remove the first aid kit: Open the trunk. Lift the luggage floor. The first aid kit 䊊 1 is located in the storage cover 䊊 2 . TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) .
● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact a NISSAN dealer as soon as possible for tire replacement and/or system resetting.
Getting the spare tire and tools Open the trunk. Lift the luggage floor. Remove the wheel nut wrench 䊊 1 and the jack 䊊 2 from the from the storage cover 䊊 3 . Then remove the storage cover 䊊 3 to access the spare tire. T urn the clamp to remove the spare tire.
Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle.
Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench.
4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D , 䊊 E ) . Lower the vehicle completely. WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off.
● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery.
● Make sure the jumper cables do not touch moving parts in the engine com- partment and that the cable clamps do not contact any other metal. 6. Start the engine of the booster vehicle and let it run for a few minutes. 7. Keep the engine speed of the booster ve- hicle at about 2,000 rpm and start the en- gine of the vehicle being jump started.
3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood.
For information about towing your vehicle behind a recreational vehicle (RV) , refer to “Flat towing” in the “T echnical and consumer information” sec- tion of this manual.
CAUTION ● Never tow Continuously Variable T rans- mission (CVT) models with the front wheels on the ground or 4 wheels on the ground (forward or backward) , as this may cause serious and expensive damage to the transmission. If it is nec- essary to tow the vehicle with the rear wheels raised always use towing dollies under the front wheels.
4. Slowly rock the vehicle forward and back- ward. ● Shift back and forth between R (Reverse) and D (Drive) . ● Apply the accelerator as little as possible to maintain the rocking motion. ● Release the accelerator pedal before shifting between R (Reverse) and D (Drive) .
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to p.
REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish.
CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish.
Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and one passenger’s side front floor mat bracket to help keep your floor mats in place. Genuine NISSAN floor mats have been specially designed for your vehicle model.
T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process.
CAUTION A license plate frame could vibrate and cause noise or paint damage. To avoid damage or noise, add a soft adhesive pad with a maximum thickness of 1/8 in (4 mm) to the back lower edge of the license plate frame.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions .........................
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money; however, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition as well as its emis- sions and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
Steering wheel Check for changes in the steer- ing system, such as excessive freeplay, hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly . Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak.
Underbody The underbody is frequently ex- posed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances from the underbody , otherwise rust may form on the floor pan, frame, fuel lines and exhaust system.
CAUTION ● Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improperly disposed engine oil, engine coolant and/or other vehicle fluids can damage the environment.
QR25DE engine 1. P ower steering fluid reservoir 2. Engine coolant reservoir 3. Engine oil filler cap 4. Brake fluid reservoir 5. Air cleaner 6. Fuse block/Fusible links 7.
VQ35DE engine 1. P ower steering fluid reservoir 2. Engine coolant reservoir 3. Engine oil filler cap 4. Brake fluid reservoir 5. Air cleaner 6. Fuse block/Fusible links 7.
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Engine Coolant (blue) and 50% water to provide year-round antifreeze and coolant pro- tection. The antifreeze solution contains rust and corrosion inhibitors.
CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the reservoir is empty , check the coolant level in the radiator when the engine is cold.
CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
CAUTION ● Oil level should be checked regularly. Operating the engine with an insuffi- cient amount of oil can damage the engine, and such damage is not covered by warranty. ● It is normal to add some oil between oil maintenance intervals or during the break -in period, depending on the se- verity of operating conditions.
CAUTION Be careful not to burn yourself. The engine oil may be hot. 6. Clean and reinstall the drain plug 䊊 A and a new washer. Securely tighten the drain plug with a wrench. Do not use excessive force. Drain plug tightening torque: 25 Ft-lb (34 N·m) 7.
4. Remove pins 䊊 C from the right engine pro- tector located inside right wheel well, re- move protector. Remove oil filter 䊊 B with an oil filter wrench by turning it counterclock - wise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn yourself.
Check the fluid level in the reservoir. The fluid level should be checked when the fluid is cold at fluid temperatures of 32 to 86ºF (0 to 30ºC) . The fluid level can be checked with the level gauge which is attached to the cap. T o check the fluid level, remove the cap.
BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line 䊊 B or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line 䊊 A . If fluid must be added frequently , the system should be checked by a NISSAN dealer.
● Pre-mix washer fluid concentrates with water to the manufacturer’s recom- mended levels before pouring the fluid into the windshield-washer fluid reser- voir. Do not use the windshield-washer fluid reservoir to mix the washer fluid concentrate and water.
● Keep battery out of the reach of children. ● Do not tip the battery. Keep the vent caps tight and the battery level. 1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell.
V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP ST ARTING If jump starting is necessary , refer to “Jump start- ing” in the “In case of emergency” section of this manual.
1. Crankshaft pulley 2. Drive belt automatic tensioner pulley 3. W ater pump pulley 4. Generator pulley 5. Air compressor pulley WARNING Be sure the ignition switch is placed in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly.
REPLACING SP ARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in the “NISSAN Service and Maintenance Guide” .
T o remove the air cleaner filter: ● Unlatch the clips and move the air cleaner cover upward. ● Remove the air cleaner filter. ● Wipe the inside of the air cleaner filter hous- ing and the cover with a damp cloth. NO TE: After installing a new air cleaner, make sure the air cleaner cover is seated in the housing and latch the clips.
REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push the release tab 䊊 B then move the wiper blade down the wiper arm to remove. 3. Remove the wiper blade from wiper arm 䊊 C . 4. Insert the new wiper blade onto the wiper arm until it clicks into place.
If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes.
If a type 䊊 A fuse is used to replace a type 䊊 B fuse, the type 䊊 A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely.
5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links.
4. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 5. Reverse step 2 to reinstall fuse box cover. 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer.
How to remove the extended storage switch: 1. T o remove the extended storage switch, be sure the ignition switch is in the OFF or L OCK position. 2. Be sure the headlight switch is in the OFF position. 3. Remove the fuse box cover. 4. Pinch the locking tabs 䊊 1 found on each side of the storage switch.
NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent Key as fol- lows: 1. Remove the mechanical key from the Intelli- gent Key . 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part.
HEADLIGHTS Replacing the xenon headlight bulb (if so equipped) WARNING When xenon headlights are on, they pro- duce a high voltage. T o prevent an electric shock, never attempt to modify or disas- semble. Always have your xenon head- lights replaced at a NISSAN dealer.
1. Disconnect the negative battery cable. 2. Remove the fasteners 䊊 A ; carefully pull back the front fender protector. 3. Rotate the bulb 䊊 B counterclockwise and pull out to remove.
1. Disconnect the negative battery cable. 2. Remove the fasteners 䊊 A ; carefully pull back the front fender protector. 3. Rotate the bulb 䊊 B counterclockwise and pull out to remove.
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* Headlight assembly * Low (Halogen) 55 H11 Low (Xenon) 35 D2S High 65 H9 Side marker 5 W5W Door mirror turn signal light (if so equipped) * — — Park/turn signal light 28/8 7444A Front fog light (if so equipped) 55 H11 Day time running lights (Canada only) 19 PS19W Step light 3.
1. Front map light 2. Headlamp assembly 3. Park/T urn signal light 4. Fog light (if so equipped)/Day time running light (Canada only) 5. Step light 6. Door mirror turn signal light (if so equipped) 7. Personal light 8. High-mount stoplight 9. T runk light 10.
Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, light and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the housing. Use a cloth and suitable tool 䊊 1 to protect the housing.
If you have a flat tire, refer “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) WARNING Radio waves could adversely affect electric medical equipment.
The tire pressures should be checked when the tires are cold. The tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 Tire size – refer to “Tire labeling” in this section. 䊊 3 Cold tire pressure: Inflate the tires to this pressure when the tires are cold.
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
Size Cold Tire Inflation Pres- sure Front Original Tire P215/60R16 220 kPa, 32 PSI P215/55R17 230 kPa, 33 PSI P235/45R18 Rear Original Tire P215/60R16 220 kPa, 32 PSI P215/55R17 230 kPa, 33 PSI P235/4.
䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Only certain SAE class “S” tire chains can be used on this vehicle. Using the wrong Class “S” chains on this vehicle will cause damage to the vehicle.
Do not use tire chains on dry roads. Driving with tire chains in such conditions can cause damage to the various mechanisms of the vehicle due to some overstress. CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km).
Tire wear and damage 1. W ear indicator 2. Location mark WARNING ● Tires should be periodically in- spected for wear, cracking, bulg- ing or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.
● If the wheels are changed for any rea- son, always replace with wheels which have the same off-set dimension. Wheels of a different off-set could cause premature tire wear, degrade ve- hicle handling characteristic s, affect the VDC system and/or interference with the brake disc s/drums.
Spare tire (TEMPORAR Y USE ONL Y spare tire) Observe the following precautions if the TEM- PORAR Y USE ONL Y spare tire must be used. Otherwise, your vehicle could be damaged or involved in an accident: WARNING ● The spare tire should be used for emer- gency use only.
9 T echnical and consumer information Recommended fluids/lubricants and capacities .......9 - 2 Recommended fuel .............................9 - 4 Engine oil and oil filter recommendations ..........9 - 6 Air conditioner system refrigerant and oil recommendations .
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.
Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Brake fluid Refill to the proper level according to the instructions in the “Maintenance and do-it-yourself” section.
RECOMMENDED FUEL Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage.
● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors.
ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. For additional infor- mation, refer to “Recommended fluids/lubricants and capacities” in this section.
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
ENGINE Model QR25DE VQ35DE T ype Gasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder in-line 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 151.
WHEELS AND TIRES Wheel type Size Offset in (mm) Steel 16 x 7.0J 1.97 (50) Aluminum 16 x 7.0J 1.97 (50) Aluminum 17 x 7.5J 1.97 (50) Aluminum 18 x 7.5J 2.17 (55) T -type (ST spare) 16 x 4T 1.57 (40) T -type (ST, AL spare) 1 6x4 T 1 . 1 8( 3 0 ) Tire size 2.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
EMISSION CONTROL INFORMA TION LABEL The emission control information label is at- tached to the underside of the hood as shown. TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown.
T o mount the front license plate, attach the li- cense plate bracket 䊊 1 to the plastic finisher at the location marks (small dimples) using the two 6 mm screws provided. WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle.
● Vehicle Capacity W eight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle.
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. Before driving a loaded vehicle, confirm that you do not exceed the Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GA WR) for your vehicle.
Do not tow a trailer with your vehicle. FLA T T OWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage.
WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s.
For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN.
Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns.
Genuine NISSAN Service Manuals for this model year and prior can be purchased. A Genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory- trained technicians working at NISSAN dealer- ships.
MEMO 9-22 T echnical and consumer information I n f o r m a t i o n P r o v i d e d b y :.
10 Index A ABS (Anti-lock Braking System) ........ 5 - 3 2 Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 4 1 Air bag system Front (See supplemental front impact air bag system) ................. 1 - 4 8 A i r b a g w a r n i n g l i g h t .
CD care and cleaning .............. 4 - 8 1 CD player (See audio system) .4-45, 4-49, 4-54, 4-60, 4-67 Check tire pressure ............... 2 - 2 6 Child restraints ....... 1 - 1 8 , 1 - 1 9 , 1 - 2 0 , 1 - 2 2 LA T CH (Lower Anchors and T ethers for CHildren) System .
F First aid kit ..................... 6 - 3 Flashers (See hazard warning flasher switch) . .6-2 Flat tire ....................... 6 - 3 Floor mat positioning aid ............. 7 - 6 Fluid Brake fluid .................. 8 - 1 5 Capacities and recommended fuel/lubricants .
J Jump starting ................ 6 - 8 , 8 - 1 9 K K e y ......................... 3 - 2 Keyless entry With Intelligent Key system (See Intelligent Key system) ..... 3 - 1 3 , 3 - 2 1 Keys NISSAN Intelligent Key® .......... 3 - 2 0 L Labels Air conditioner specification label .
O O c t a n e r a t i n g ( S e e f u e l o c t a n e r a t i n g ) ...... 9 - 5 Odometer ..................... 2 - 4 Oil Capacities and recommended fuel/lubricants ................. 9 - 2 Changing engine oil ............. 8 - 1 2 Changing engine oil filter .
Seats Adjustment ................... 1 - 2 A r m r e s t s .................... 1 - 7 F r o n t s e a t s ................... 1 - 2 H e a t e d s e a t s ................. 2 - 3 7 Manual front seat adjustment ......... 1 - 2 Rear seat ................
T ransmission Continuously V ariable T ransmission (CVT) f l u i d ...................... 8 - 1 4 Driving with Continuously Variable T ransmission (CVT) ............. 5 - 1 3 T ransmission shift lever lock release ...... 5 - 1 7 T ravel (See registering your vehicle in another country) .
RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage.
® 2015 AL TI MA S E D AN OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2015 N IS SAN AL TI MA SE DAN L33-D L33-D Printing : March 2015 (10) Publication No.
Een belangrijk punt na aankoop van elk apparaat Nissan Altima Sedan (2015) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan Altima Sedan (2015) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan Altima Sedan (2015) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan Altima Sedan (2015) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan Altima Sedan (2015) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan Altima Sedan (2015) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan Altima Sedan (2015) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan Altima Sedan (2015) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
