Gebruiksaanwijzing /service van het product Cube (2014) van de fabrikant Nissan
Ga naar pagina of 332
® 2014 cube OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2014 N I SSAN cube Z12-D Z12-D Printing : September 2013 (18) Publication No.
Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure.
WHEN READING THE MANUAL This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing.
Arrows in an illustration that are similar to those above indicate movement or action. Arrows in an illustration that are similar to those above call attention to an item in the illustration.
NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
.
.
Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving checks and adjustments Center display, heater, air conditioner, au.
.
0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ............................................................................ 0-2 Exterior front .................................................................
0-2 Illustrated table of contents SSI0659 1. Supplemental front-impact air bags (Page 1-41) 2. Front seat-mounted side-impact supplemental air bags (P .1-41) 3. Seat belts (P .1-11) 4. Front head restraints (P .1-6) — Front-seat Active Head Restraints (P .
SSI0559 1. Hood (P .3-19) 2. Headlights and turn signal lights — Switch operation (P .2-24) — Bulb replacement (P .8-26) 3. Windshield wiper and washer — Switch operation (P .2-22) — Blade replacement (P .8-17) — Window washer fluid (P .8-12) 4.
0-4 Illustrated table of contents SSI0660 1. Rear window wiper and washer — Switch operation (P .2-23) — Window washer fluid (P .8-12) 2. High-mounted stop light — Bulb replacement (P .8-28) 3. Antenna (P .4-48) — Satellite radio antenna* (P .
SSI0634 1. Rear pillar pocket (P .2-32) 2. Soft bottle holders (P .2-31) 3. Ceiling light (P .2-37) 4. Utility hooks (P .2-33) 5. Jack and tools (P .6-4) 6. Door armrest — Power window switch (P .2-33) — Power door lock switch (P .3-5) 7. Microphone — Bluetooth ® Hands-Free Phone System (P .
0-6 Illustrated table of contents SSI0563 1. Front cup holders (P .2-29) 2. Headlight, fog light and turn signal switch — Headlight (P .2-24) — T urn signal light (P .2-27) — Fog light* (P .2-27) 3. Steering wheel — Electric power steering system (P .
JVC0529X 1. Side ventilator (P .4-13) 2. Meters and gauges (P .2-4) 3. Center ventilator (P .4-13) 4. Hazard warning flasher switch (P .6-2) 5. Audio system* (P .4-21) or Navigation system** — Clock* (P .4-6, 4-32) 6. Front passenger air bag status light (P .
0-8 Illustrated table of contents SIC4119 1. T achometer (P .2-7) 2. Engine coolant temperature gauge (P.2-7) 3. V ehicle information display (P .2-8) — Odometer/twin trip odometer (P .2-5) — T rip computer (P .2-9) — Outside air temperature* (P .
SSI0564 MR18DE ENGINE* 1. Engine oil filler cap (P .8-9) 2. Brake and clutch (*1) fluid reservoir (P .8-12) 3. Air cleaner (P .8-16) 4. Battery (P .8-13) — Jump starting (P .6-10) 5. Window washer fluid reservoir (P .8-12) 6. Engine drive belt location (P .
0-10 Illustrated table of contents Warning light Name Page Anti-lock Braking System (ABS) warning light 2-12 Brake warning light 2-12 Charge warning light 2-13 Door open warning light 2-13 Electric po.
1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats .......................................................................
1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries.
SSS0792 FRONT SEA TS Front manual seat adjustment Forward and backward: Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining: T o recline the seatback, pull the lever * 2 up and lean back.
1-4 Safety — Seats, seat belts and supplemental restraint system SSS0961 REAR SEA TS Forward and backward Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position.
SSS0962 T o fold down the seatback of each rear seat, pull the strap * 1 or * 2 . CAUTION When folding or returning the seatback(s) to the upright position, to avoid injury to yourself and others: . Make sure that the seat path is clear before moving the seat.
1-6 Safety — Seats, seat belts and supplemental restraint system SSS0970 ARMREST Front Pull the armrest down until it is horizontal. SSS0963 Rear Pull the armrest down until it is horizontal. WARNING Head restraint/headrest supplement the other vehicle safety systems.
JVR0060X The illustration shows the seating positions equipped with head restraint/headrest. Indicates the seating position is equipped with a head restraint. . Y our vehicle is equipped with a head restraint/headrest that may be integrated, adjustable or non-adjustable.
1-8 Safety — Seats, seat belts and supplemental restraint system JVR0203X NON-ADJUST ABLE HEAD RE- STRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks SSS1037 REMOVE Use the following procedure to remove the head restraint/headrest.
SSS0997 ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
1-10 Safety — Seats, seat belts and supplemental restraint system SSS1036 Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position.
PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
1-12 Safety — Seats, seat belts and supplemental restraint system SSS0016 SSS0014 WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint.
. Once a seat belt pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See a NISSAN dealer. . Removal and installation of the pretensioner system components should be done by a NISSAN dealer.
1-14 Safety — Seats, seat belts and supplemental restraint system JVR0276X WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Re- tractor (ALR) mode seat belts.
SSS0290 4. P osition the lap belt portion low and snug on the hips as shown. 5. Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: .
1-16 Safety — Seats, seat belts and supplemental restraint system SSS0987 Rear seat belt buckles The rear seat belt buckles can be stowed by pushing the buckles into the pockets of the seat cushion when the rear seatback is folded. The buckles should only be stowed when the seat- back is folded.
WARNING . After adjustment, release the ad- justment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position.
1-18 Safety — Seats, seat belts and supplemental restraint system SSS0241 WARNING . Always fasten the connector tongue and the seat belt in the order shown. . Always make sure both the connec- tor tongue and the seat belt tongue are secured when using the seat belt or installing a child restraint.
Stowing rear center seat belt: When folding down the rear seat, the rear center seat belt can be retracted into a stowed position as follows: 1. Hold the connector tongue * 1 so that the seat belt does not retract suddenly when the tongue is released from the connector buckle.
1-20 Safety — Seats, seat belts and supplemental restraint system SEA T BEL T EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap-shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased.
may also be released. Release the connector tongue * 1 by inserting a suitable tool (such as a key) * 2 into the connector buckle. If the seat belt can not be unbuckled or is already un- buckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt.
1-22 Safety — Seats, seat belts and supplemental restraint system should choose a child restraint that fits your vehicle and always follow the manufacturer’s instructions for installation and use.
PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- stallation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child restraint must be used and installed properly.
1-24 Safety — Seats, seat belts and supplemental restraint system “Lower Anchors and T ethers for CHildren System (LA T CH) ” (P .1-24). If you do not have a LA T CH compatible child restraint, the vehicle seat belts can be used. Several manufacturers offer child restraints for infants and small children of various sizes.
Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages.
1-26 Safety — Seats, seat belts and supplemental restraint system SSS0644 LA TCH rigid-mou nted attachment The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts.
SSS0967 Anchor points are located on the seat cushion behind the outboard and center seating posi- tions. The child restraint top tether strap must be used when installing child restraints with the LA T CH lower anchor attachments or seat belts.
1-28 Safety — Seats, seat belts and supplemental restraint system SSS0648 Rear-facing web-mounted — step 2 2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachments are properly attached to the lower anchors.
SSS0650 Rear-facing — step 4 4. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child restraint should not move more than 1 inch (25 mm) , from side to side.
1-30 Safety — Seats, seat belts and supplemental restraint system passenger air bag. See “Front pas- senger air bag and status light” (P .1- 49) . . When installing a child restraint system in the rear center position, both the center seat belt connector tongue and buckle tongue must be secured.
SSS0655 Rear-facing — step 3 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
1-32 Safety — Seats, seat belts and supplemental restraint system SSS0658 Rear-facing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path.
SSS0646 Forward-facing rigid-mounted — step 2 3. The back of the child restraint should be secured against the vehicle seatback. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. If the head restraint is removed, store it in a secure place.
1-34 Safety — Seats, seat belts and supplemental restraint system child restraint is loose, repeat steps 1 through 6. FORW ARD-FACING CHILD RE- STRAINT INST ALLA TION USING THE SEA T BEL TS WARNING . The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint.
SSS0360B Forward-facing — step 3 3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage.
1-36 Safety — Seats, seat belts and supplemental restraint system SSS0653 Forward-facing — step 6 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
SSS0481 Forward-facing — step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated, see “Front passenger air bag and status light” (P .
1-38 Safety — Seats, seat belts and supplemental restraint system BOOSTER SEA TS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: .
LRS0464 All U.S. states require that infants and small children be restrained in an ap- proved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats or the front passenger seat.
1-40 Safety — Seats, seat belts and supplemental restraint system LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint to obtain the correct booster seat fit.
PRECAUTIONS ON SUPPLEMENT AL RESTRAINT SY STEM This Supplemental Restraint System (SRS) section contains important information concern- ing the following systems: . Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) .
1-42 Safety — Seats, seat belts and supplemental restraint system SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower se- verity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
back against the seatback and as far away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened.
1-44 Safety — Seats, seat belts and supplemental restraint system SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations.
SSS0059A Do not lean against doors or windows. SSS0188A SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact sup- plemental air bags and roof-mounted curtain side-impact supplemental air bags: .
1-46 Safety — Seats, seat belts and supplemental restraint system . The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force.
SSS1049 1. Crash zone sensor 2. Supplemental front-impact air bag modules 3. Front seat-mounted side-impact supplemental air bag modules 4. Occupant classification sensors (weight sen- sors) 5. Occupant classification system control unit 6. Roof-mounted curtain side-impact supplemental air bag modules 7.
1-48 Safety — Seats, seat belts and supplemental restraint system . Until you have confirmed with your dealer that your passenger seat occupant classification system is working properly, position the occu- pants in the rear seating positions.
SSS0481 Front passenger air bag status light Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some conditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is necessary for most effective protection.
1-50 Safety — Seats, seat belts and supplemental restraint system sensors to turn the air bag OFF . Always be sure to be seated and wearing the seat belt properly for the most effective protection by the seat belt and supplemental air bag. NISSAN recommends that pre-teens and chil- dren be properly restrained in a rear seat.
. Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave permanent impressions in the seat. Such objects can damage the seat or occupant classification sensors (weight sensors). This can affect the operation of the air bag system and result in serious perso- nal injury.
1-52 Safety — Seats, seat belts and supplemental restraint system *The SRS wiring harness connectors are yellow and orange for easy identification. When selling your vehicle, we request that you inform the buyer about the front air bag system and guide the buyer to the appropriate sections in this Owner’s Manual.
rails. The side air bags and curtain air bags inflate quickly in order to help protect the occupants in the outboard seating positions. Because of this, the force of the side air bags and curtain air bags inflating can increase the risk of injury if the occupant is too close to, or is against, these air bag modules during inflation.
1-54 Safety — Seats, seat belts and supplemental restraint system activated, be sure to have the pre- tensioner system checked and, if necessary, replaced by a NISSAN dealer. . No unauthorized changes should be made to any components or wiring of the pretensioner system.
SSS1020 * 1 SRS air bag The warning labels are located on the surface of the sun visors. SP A1097 SUPPLEMENT AL AIR BAG WARNING LIGHT The supplemental air bag warning light, display- ing in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring.
1-56 Safety — Seats, seat belts and supplemental restraint system REP AIR AND REPLACEMENT PRO- CEDURE The front air bags, side air bags, curtain air bags and pretensioners are designed to activate on a one-time-only basis.
2 Instruments and controls Cockpit ........................................................................................ 2-2 Instrument panel ........................................................................ 2-3 Meters and gauges ...........
2-2 Instruments and controls SSI0563 1. Front cup holders 2. Headlight, fog light and turn signal switch 3. Steering wheel — Horn — Driver’s supplemental air bag 4. Wiper and washer switch 5. Fuse box cover 6. Outside mirror remote control switch 7.
JVC0529X 1. Side ventilator 2. Meters and gauges 3. Center ventilator 4. Hazard warning flasher switch 5. Audio system* or Navigation system** — Clock* 6. Front passenger air bag status light 7. Front passenger supplemental air bag 8. Fuel-filler door release handle 9.
2-4 Instruments and controls SIC4119 1. T achometer 2. Engine coolant temperature gauge 3. V ehicle information display — Odometer/twin trip odometer — T rip computer — Outside air temperature* 4. Fuel gauge 5. Speedometer 6. Warning/indicator lights 7.
SIC4120 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h) . SIC4121 Odometer/twin trip odometer Odometer/twin trip odometer The odometer * 1 /twin trip odometer * 2 are displayed when the ignition switch is in the ON position.
2-6 Instruments and controls SIC4712 Loose fuel cap warning message Push the trip computer mode switch * A for more than 1 second to reset the L OOSE FUEL CAP warning message after the fuel cap has been tightened. For additional information see “Fuel-filler cap” (P .
SIC4122 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM) . Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage.
2-8 Instruments and controls SIC4124 FUEL GAUGE The gauge * 1 indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Refill the fuel tank before the gauge registers 0 (empty) .
OUTSIDE AIR TEMPERA TURE (if so equipped) The outside air temperature is displayed in 8 F. When the outside air temperature becomes 37 8 F( 3 8 C) or lower, the outside air temperature display blinks to give a warning. The display will stop blinking after 1 minute or when the outside air temperature becomes 39 8 F( 4 8 C) or above.
2-10 Instruments and controls Average fuel consumption (mpg or l (liter)/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the trip computer mode switch * A for approximately 1 second.
Anti-lock Braking System (ABS) warning light Low tire pressure warning light Front passenger air bag status light Brake warning light P position selecting warning light* High beam indicator light Char.
2-12 Instruments and controls CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine.
Charge warning light If the light illuminates while the engine is running, it may indicate the charging system is not functioning properly . T urn the engine off and check the alternator belt. If the belt is loose, broken, missing or if the light remains on, see a NISSAN dealer immediately .
2-14 Instruments and controls Low fuel warning light This light illuminates when the fuel in the tank is getting low . Refuel as soon as it is convenient, preferably before the fuel gauge reaches the 0 (empty) position. There will be a small reserve of fuel remaining in the tank when the fuel gauge reaches the 0 position.
tire pressure warning light OFF. If the light still illuminates while driv- ing after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible.
2-16 Instruments and controls restraint system” (P .1-41). WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pretensioner systems will not operate in an accident.
Malfunction Indicator Light (MIL) If the malfunction indicator light illuminates steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable T ransmission (CVT) mal- function.
2-18 Instruments and controls T urn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on. V ehicle Dynamic Control (VDC) off indicator light The light comes on when the V ehicle Dynamic Control (VDC) off switch is pushed to OFF .
SIC4160 Y our vehicle has two types of security systems, as follows: . V ehicle security system . NISSAN V ehicle Immobilizer System The security condition will be shown by the security indicator light.
2-20 Instruments and controls a. the L OCK button on the keyfob or Intelligent Key (if so equipped) b. any request switch (Intelligent Key equipped model) c. the power door lock switch d. the key — master or mechanical (Intelli- gent Key equipped model) 4.
FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer- ence received, including interference that may cause undesired operation.
2-22 Instruments and controls WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshield. CAUTION . Do not operate the washer continu- ously for more than 30 seconds.
WARNING In freezing temperatures the washer solution may freeze on the rear window glass and obscure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION . Do not operate the washer continu- ously for more than 30 seconds.
2-24 Instruments and controls SIC4127 T ype A SIC4145 T ype B T o defog/defrost the rear window glass, start the engine and push the switch * 1 on. The indicator light * 2 will illuminate. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes.
SIC3669 Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically . T o set the autolight system: 1. Make sure the headlight switch is in the AUT O position * 1 . 2. Place the ignition switch in the ON position.
2-26 Instruments and controls SIC3670 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam.
Instrument brightness control The instrument brightness control operates when the ignition switch is in the ON position. Push the control knob * A to adjust the bright- ness of the instrument panel lights. The bright- ness indicator * B will be shown briefly in the vehicle information display when the control is turned.
2-28 Instruments and controls SIC4130 T o sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. T ampering with the supplemental front air bag system may result in serious personal injury.
. Avoid using power outlet when the air conditioner, headlights or rear window defroster is on. . This power outlet is not designed for use with a cigarette lighter unit. . Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal tem- perature fuse may open.
2-30 Instruments and controls SIC4134 Center console Front SIC4135 Rear Pull the armrest down until it is horizontal. SIC4137 Door (front and rear) SIC4136 Rear of center console 2-30 Instruments and controls SIC4134 Center console Front SIC4135 Rear Pull the armrest down until it is horizontal.
Soft bottle holders CAUTION . Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident.
2-32 Instruments and controls SIC4147 REAR PILLAR POCKET CAUTION Do not keep heavy or long objects in the pocket. SIC4141 LUGGAGE HOOKS WARNING . Do not attach upper tether anchors to the luggage hooks. The child restraint will not be properly in- stalled.
SIC4142 Instrument panel UTILITY HOOKS T wo removable utility hooks are supplied with your vehicle. The utility hooks can be attached to or removed from the holes on the instrument panel and the rear doors. CAUTION Do not apply a total load of more than 3 lb (1.
2-34 Instruments and controls SIC3507 1. Window lock button 2. Driver side window 3. Rear left passenger side window 4. Front passenger side window 5. Rear right passenger side window Main power window switch (driver’s side) T o open or close the window, push down * A or pull up * B the switch and hold it.
SIC3509 Automatic operation The automatic operation is available for the switch that has an mark on its surface. T o fully open or close the window, completely push down or pull up the switch and release it; the switch need not be held. The window will automatically open or close all the way.
2-36 Instruments and controls CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. SIC4572 MAP LIGHTS Operate the map light switch to turn the map light on or off.
Center position When the switch is in the center position, the map lights will illuminate under the following conditions: . ignition switch is placed in the OFF position (models with Intelligent Key system) — remain on for about 15 seconds.
2-38 Instruments and controls OFF position When the switch is in the OFF position * 3 , the ceiling light will not illuminate, regardless of the condition. JVI0358X When the switch is in the ON position * 1 , the light illuminates while the back door is opened.
3 Pre-driving checks and adjustments Keys .............................................................................................. 3-2 NISSAN V ehicle Immobilizer System keys ................... 3-2 Intelligent Keys (if so equipped) ............
3-2 Pre-driving checks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number.
SP A2406 1. Intelligent Key (2 sets) 2. Mechanical key (inside Intelligent Key) (2 sets) 3. Key number plate INTELLIGENT KEYS (if so equipped) Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intelligent K ey system components and NISSAN V ehicle Immobilizer System compo- nents.
3-4 Pre-driving checks and adjustments SP A2033 Mechanical key T o remove the mechanical key , release the lock knob at the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.
SP A2602 L OCKING WITH KEY The power door lock system allows you to lock or unlock all doors simultaneously . . T urning the driver’s door key cylinder to the front of the vehicle * 1 will lock all doors and the back door. . T urning the driver’s door key cylinder once to the rear of the vehicle * 2 will unlock the driver’s door.
3-6 Pre-driving checks and adjustments Lockout protection Lockout protection function helps to prevent the keys from being accidentally locked inside the vehicle.
It is possible to lock/unlock all doors (including the back door) , and activate the panic alarm by using the keyfob from outside the vehicle. Before locking the doors, make sure the key is not left in the vehicle. The keyfob can operate at a distance of approximately 33 ft (10 m) from the vehicle.
3-8 Pre-driving checks and adjustments JVP0213X * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button * 4 Battery indicator light HOW T O USE REMO TE KEYLESS ENTR Y S Y STEM Locking doors 1. Remove the key from the ignition switch. 2. Close all the doors.
Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the L OCK button * 1 is pushed, the hazard indicator flashes twice and the horn chirps once.
3-10 Pre-driving checks and adjustments WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use. . The Intelligent Key transmits radio waves when the buttons are pushed.
the system function. . Do not drop the Intelligent Key. . Do not strike the Intelligent Key sharply against another object. . Do not change or modify the Intel- ligent Key. . Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is comple- tely dry.
3-12 Pre-driving checks and adjustments SP A2612 INTELLIGENT KEY OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch * 1 .
. Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. SP A2408 SP A2605 SP A2606 INTELLIGENT KEY OPERA TION Y ou can lock or unlock the doors without taking the key out from your pocket or bag.
3-14 Pre-driving checks and adjustments Locking doors 1. Place the ignition switch in the OFF position and carry the Intelligent K ey with you.*1 2. Close all the doors.*2 3. Push the door handle request switch (dri- ver’s or front passenger’s) * A or the back door request switch * B while carrying the Intelligent Key with you.
TROUBLESHOO TING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The P position selecting warning light in the meter illuminates and the inside warn- ing chime sounds continuously. The shift lever is not in the P (Park) position.
3-16 Pre-driving checks and adjustments HOW T O USE REMO TE KEYLESS ENTR Y FUNCTION WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
SP A2252 * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button When you lock or unlock the doors, the hazard indicator will flash and the horn will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P .3-17). Locking doors 1.
3-18 Pre-driving checks and adjustments horn operates. Hazard indicator and horn mode: Operation DOOR LOCK DOOR UNLOCK Pushing door handle request switch or back door request switch HAZARD - twice OUT.
WARNING . Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. . If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
3-20 Pre-driving checks and adjustments WARNING . Always be sure the back door has been closed securely to prevent it from opening while driving. . Do not drive with the back door open. This could allow dangerous exhaust gases to be drawn into the vehicle.
SP A2336 OPENING THE FUEL -FILLER DOOR T o open the fuel-filler door, pull the release handle located below the instrument panel. T o lock, close the fuel-filler door securely . SP A2800 FUEL -FILLER CAP T o remove the fuel-filler cap: 1. T urn the fuel-filler cap counterclockwise * 1 to remove.
3-22 Pre-driving checks and adjustments . Do not fill a portable fuel container in the vehicle or trailer. Static elec- tricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer.
CAP warning message after tightening the fuel cap. WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. SP A2611 TIL T OPERA TION Push the lock lever down * 1 and adjust the steering wheel up or down * 2 to the desired position.
3-24 Pre-driving checks and adjustments SIC2872 1. T o block out glare from the front, swing down the sun visor * 1 . 2. T o block glare from the side, remove the sun visor from the center mount and swing it to the side * 2 . SP A2447 INSIDE MIRROR Adjust the angle of the inside mirror to the desired position.
SP A2214 OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.
3-26 Pre-driving checks and adjustments SP A1733 V ANITY MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover. 3-26 Pre-driving checks and adjustments SP A1733 V ANITY MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover.
MEMO Pre-driving checks and adjustments 3-27 MEMO Pre-driving checks and adjustments 3-27.
3-28 Pre-driving checks and adjustments MEMO 3-28 Pre-driving checks and adjustments MEMO.
4 Center display, heater, air conditioner, audio and phone systems Safety note .................................................................................. 4-2 Control panel buttons — color screen with navigation system (if so equipped) ......
4-2 Center display, heater, air conditioner, audio and phone systems WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound.
SAA3377 1. (brightness control) button (P .4-5) 2. Display screen 3. MAP button* 4. NAV button* 5. TRAF button* 6. SETUP button (P .4-6) 7. BACK button (P .4-5) 8. TUNE/SCROLL knob (P .4-39) 9. Power button/V olume control knob (P .4-39) *For navigation system control buttons, refer to the separate Navigation System Owner’s Man- ual.
4-4 Center display, heater, air conditioner, audio and phone systems . T o clean the display, never use a rough cloth, alcohol, benzine, thin- ner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deterio- rate the panel.
SAA3388 Other items are adjusted by selecting one of a set number of conditions. For example, the Display Mode can be set to “Automatic” , “Day” or “Night” .
4-6 Center display, heater, air conditioner, audio and phone systems SAA3390 HOW T O USE THE SETUP BUTT ON When the SETUP button is pushed, the Setup screen will appear on the display. Y ou can select and/or adjust several functions, features and modes that are available for your vehicle.
SAA3391 System setup Select the “System” key to select and/or adjust various functions of the system. A screen with additional options will appear. SAA3392 Display: Select the “Display” key to adjust the appear- ance of the display . The following settings can be adjusted: .
4-8 Center display, heater, air conditioner, audio and phone systems SAA3393 Clock: Select the “Clock” key to adjust the time and the appearance of the clock on the display. The following settings can be adjusted: . Time Format : The clock can be set to 12 hours or 24 hours.
(such as the button) is pressed and held for two seconds. Reset all settings/memory: Select the “Reset All Settings/Memory” key to return all settings to default and to clear the memory . T raffic Info setup Refer to the separate Navigation System Own- er’s Manual for information regarding this item.
4-10 Center display, heater, air conditioner, audio and phone systems may malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the camera lens when cleaning dirt or snow from the lens.
SAA2777 Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on the hill is the place * B .
4-12 Center display, heater, air conditioner, audio and phone systems the hill is viewed closer than it appears on the monitor. SAA3440 Backing up near a projecting object The vehicle may seem to nearly clear the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course.
course. HOW T O ADJUST THE SCREEN The brightness can be adjusted by performing the following procedure. 1. Push the SETUP button and then select the “System” key . 2. Select the “Display” key. The “Brightness” key is displayed. 3. Select the preferred brightness level.
4-14 Center display, heater, air conditioner, audio and phone systems SAA2344 SIDE VENTILA T ORS Adjust the air flow direction of ventilators as illustrated. : This symbol indicates that the vents are closed. : This symbol indicates that the vents are open.
SAA2345 1. Rear window defroster button (See “Rear window defroster switch” (P .2-24) .) 2. Fan speed control dial 3. A/C (Air Conditioner) button 4. Air flow control dial 5. Air recirculation button 6. T emperature control dial T o turn off the heater and air conditioner, turn the fan speed control dial to the OFF (0) position.
4-16 Center display, heater, air conditioner, audio and phone systems A/C (Air Conditioner) operation: Push the A/C button to turn on or off the air conditioner. When the air conditioner is on, the A/C indicator light on the button illuminates. T emperature control: T urn the temperature control dial to set the desired temperature.
1. T urn the air flow control dial to the position. 2. T urn the fan speed control dial to the desired position. 3. T urn the temperature control dial to the desired position. When the position is selected, the air conditioner will automatically turn on.
4-18 Center display, heater, air conditioner, audio and phone systems SAA2346 1 Front defroster button 2 Display 3 Rear window defroster button (See “Rear window defroster switch” (P .
3. Push the temperature control , button to set the desired temperature. The temperature range is between 60 8 F (18 8 C) and 90 8 F (32 8 C) . . Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be con- trolled properly .
4-20 Center display, heater, air conditioner, audio and phone systems SAA2368 SAA2369 OPERA TING TIPS (for automatic air conditioner) . When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate.
AUDIO OPERA TION PRECAUTION S Radio Place the ignition switch in the ACC or ON position and push the PWR (power/VOL (vo- lume) control to turn on the radio. If you listen to the radio with the engine not running, the ignition switch should be placed in the ACC position.
4-22 Center display, heater, air conditioner, audio and phone systems Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard.
and dehumidify or ventilate the player completely. . The player may skip while driving on rough roads. . The CD player sometimes cannot func- tion when the passenger compartment temperature is extremely high. De- crease the temperature before use. . Only use high quality 4.
4-24 Center display, heater, air conditioner, audio and phone systems . The iPod nano ® (1st Generation) may remain in fast forward or rewind mode if it is connected during a seek operation.
. Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second. . Multisession — Multisession is one of the methods for writing data to media. W riting data once to the media is called a single session, and writing more than once is called a multisession.
4-26 Center display, heater, air conditioner, audio and phone systems . An iPod nano ® (2nd Generation) will con- tinue to fast-forward or rewind if it is disconnected during a seek operation. . An incorrect song title may appear when the Play Mode is changed while using an iP od nano ® (2nd Generation) .
Playback order: SAA1025 Playback order chart Music playback order of a CD with MP3 or WMA files is as illustrated. . The names of folders not containing MP3 or WMA files are not shown in the display . . If there is a file in the top level of the disc, “Root Folder” is displayed.
4-28 Center display, heater, air conditioner, audio and phone systems Specification chart (for FM-AM Radio with Compact Disc (CD) player): Supported media CD, CD-R, CD-RW Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide (for FM-AM Radio with Compact Disc (CD) player): Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly.
4-30 Center display, heater, air conditioner, audio and phone systems Specification chart (for FM-AM-SA T Radio with Compact Disc (CD) Player): Supported media CD, CD-R, CD-RW , USB2.0 Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide (for FM-AM-SA T Radio with Compact Disc (CD) Player) : Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player.
4-32 Center display, heater, air conditioner, audio and phone systems SAA2782 1. MUTE button 2. DISP (display)/TEXT button 3. FM·AM radio band select button 4. CD PLA Y button 5. Station preset buttons 6. iPod ® button 7. AUX (auxiliary) button 8. Audio display 9.
setting. AUDIO button: Push the AUDIO button to change the selecting mode as follows. Push the TUNE ( , ) or SEEK ( , ) button to adjust Bass and T reble to the desired level.
4-34 Center display, heater, air conditioner, audio and phone systems Radio operation Radio (FM/AM) band select: Pushing the FM·AM radio band select button will change the band as follows: AM ? FM1 ? FM2 ? AM When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception.
is not available, pressing the DISP button will only switch between the frequency display and the PS display . Compact Disc (CD) player operation Place the ignition switch in the ACC or ON position, and insert the CD into the slot with the label side facing up.
4-36 Center display, heater, air conditioner, audio and phone systems RANDOM (RDM)/REPEA T (RPT) : When the RPT button is pushed for less than 1.5 seconds while the CD is being played, the play pattern can be changed as follows: CD: CD with MP3 or WMA: CD EJECT: When the CD EJECT button is pushed with the CD loaded, the CD will be ejected.
iPhone ® 3G may not work with the system in some cases. Make sure that your iP od ® firmware is updated. * 12V-charge iPod ® s are not chargeable with this system. iPod ® button: Place the ignition switch in the ACC or ON position. Then, push the iP od ® button to switch to the iPod ® mode.
4-38 Center display, heater, air conditioner, audio and phone systems AUX (Auxiliary) input AUX IN jack: The AUX IN jack is located on the audio unit. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer.
FM-AM-SA T RADIO WITH COMP ACT DISC (CD) PLA YER For all operation precautions, see “ Audio opera- tion precautions” (P .4-21) . The satellite radio mode requires an active SiriusXM Satellite Radio subscription. The sa- tellite radio is not available in Alaska, Hawaii and Guam.
4-40 Center display, heater, air conditioner, audio and phone systems TUNE (T uning) : . For AM and FM radio T urn the TUNE/SCROLL knob for manual tuning. . For SiriusXM Satellite Radio T urn the TUNE/SCROLL knob to seek channels from all of the categories when any category is not selected.
to play . While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the text is displayed listing the artist, album and song title. Next/Previous T rack and Fast Forward/Rewind: When the or button is pushed for more than 1.
4-42 Center display, heater, air conditioner, audio and phone systems the list to begin playing that song. If an MP3 CD is playing, touching the “Browse” key will also list the folders on the disc. Follow the procedure for selecting a song with the touchscreen to choose a folder.
If the system has been turned off while the USB memory was playing, pushing the ON·OFF/VOL control knob will start the USB memory . WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury.
4-44 Center display, heater, air conditioner, audio and phone systems SAA3491 Random and repeat play mode: While files on a USB device are playing, the play pattern can be altered so that songs are repeated or played randomly . Random: T ouch the “Random” key to apply a random play pattern to the USB device.
the U.S. and other countries. WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION . Do not force the USB device into the USB port.
4-46 Center display, heater, air conditioner, audio and phone systems . Genres . Songs . Composers . Audiobooks . Podcasts The following touch-panel buttons shown on the screen are also available: . : returns to the previous screen. . : plays/pauses the music selected.
SAA0451 CD/USB MEMORY CARE AND CLEANING . Handle a CD by its edges. Never touch the surface of the disc. Do not bend the disc. . Always place the discs in the storage case when they are not being used. . T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth.
4-48 Center display, heater, air conditioner, audio and phone systems VOLUME control switch Push up or down the VOLUME control switch to increase or decrease the volume. T uning switch Memory change (radio) : Push the tuning switch for less than 1.5 seconds to change the next or previous radio preset.
— The vehicle is covered with a car cover. . Be sure that antenna is removed before the vehicle enters an auto- matic car wash. . Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation.
4-50 Center display, heater, air conditioner, audio and phone systems WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
slow down or disconnect the communica- tion and cause undesired noise. It is recommended that you turn off the wireless LAN (Wi-Fi) when using the Bluetooth ® functions. . Set up the wireless connection between a compatible cellular phone and the in-vehicle phone module before using the Bluetooth ® Hands-Free Phone System.
4-52 Center display, heater, air conditioner, audio and phone systems USING THE SY STEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth ® Hands- Free Phone System. If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation.
— “One eight zero zero six six two six two oh oh” . Words can be used for the first 4 digits places only . Example: 1-800-662-6200 — “One eight hundred six six two six two oh oh” , — NO T “One eight hundred six six two sixty two hundred, and — NO T “One eight oh oh six six two sixty two hundred.
4-54 Center display, heater, air conditioner, audio and phone systems SAA2351 CONTROL BUTTONS The control buttons for the Bluetooth ® Hands- Free Phone System are located on the steering wheel. PHONE SEND Push the button to initiate a VR session or answer an incoming call.
1. Push the button on the steering wheel. The system announces the available com- mands. 2. Say: “Connect Phone” * A . The system acknowledges the command and an- nounces the next set of available commands. 3. Say: “ Add phone” * B . The system acknowl- edges the command and asks you to initiate pairing from the phone handset * C .
4-56 Center display, heater, air conditioner, audio and phone systems LIST OF VOICE COMMANDS When you push and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.
commands. . “Help” — The system announces the avail- able commands. . “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call. . “Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call.
4-58 Center display, heater, air conditioner, audio and phone systems number. “Delete Entry” * B Use the Delete Entry command to delete one entry from the phonebook. After the system acknowledges a command, say the name to delete or say “List Names” to choose an entry .
“Previous Name” * D Use the Previous Name command to move the previous name of list. Recent Calls Use the Recent Calls command to access outgoing, incoming or missed calls. “Outgoing” * A Use the Outgoing command to list the outgoing calls made from the vehicle.
4-60 Center display, heater, air conditioner, audio and phone systems T raining procedure 1. P osition the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in Park.
. go back . call 5 6280 . dial 66437 Center display, heater, air conditioner, audio and phone systems 4-61 . go back . call 5 6280 . dial 66437 Center display, heater, air conditioner, audio and phone.
4-62 Center display, heater, air conditioner, audio and phone systems TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty .
MEMO Center display, heater, air conditioner, audio and phone systems 4-63 MEMO Center display, heater, air conditioner, audio and phone systems 4-63.
4-64 Center display, heater, air conditioner, audio and phone systems MEMO 4-64 Center display, heater, air conditioner, audio and phone systems MEMO.
5 Starting and driving Precautions when starting and driving ................................ 5-2 Exhaust gas (carbon monoxide) ...................................... 5-2 Three-way catalyst .............................................................
5-2 Starting and driving WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle.
THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING . The exhaust gas and the exhaust system are very hot.
5-4 Starting and driving pressure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly .
sure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF . If you have a flat tire, replace it with a spare tire as soon as possi- ble.
5-6 Starting and driving result in a collision with other vehicles or objects, or cause the vehicle to rollover, particularly if the loss of control causes the vehicle to slide sideways.
2. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 3. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle. 4. Gradually steer the vehicle to a safe location off the road and away from traffic if possible.
5-8 Starting and driving SSD0392 CONTINUOUSL Y V ARIABLE TRANS- MISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the L OCK position until the shift lever is moved to the P (Park) position. . When turning the ignition switch to the L OCK position, make sure that the shift lever is in the P (Park) position.
KEY POSITIONS L OCK (0) The key can only be removed from the ignition switch at this position. OFF (1) The engine is turned off. The power supply is turned off. ACC (2) The electrical accessory power activates without the engine turned on. ON (3) The ignition system and the electrical accessory power activate without the engine turned on.
5-10 Starting and driving . The cargo room area is not included in the operating range but the Intelligent Key may function. . If the Intelligent K ey is placed on the instrument panel, inside the glove box or door pocket, the Intelligent Key may not function.
ACC (Accessories) This position activates electrical accessories such as the radio, when the engine is not running. ON (Normal operating position) This position turns on the ignition system and electrical accessories. OFF The engine can be turned off in this position.
5-12 Starting and driving After step 3 is performed, when the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change to ACC.
. If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Crank the engine for 5 - 6 seconds. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedal by turning the ignition switch to ST ART .
5-14 Starting and driving the engine. If the engine starts, but fails to run, repeat the above procedure. CAUTION Do not operate the starter for more than 15 seconds at a time. If the engine does not start, push the ignition switch to OFF and wait 10 seconds before cranking again, otherwise the starter could be damaged.
2. K eep the foot brake pedal depressed, push the shift lever button and move the shift lever to a driving position. 3. Release the parking brake and foot brake pedal, and then gradually start the vehicle in motion. WARNING . Do not depress the accelerator pedal while shifting from P (Park) or N (Neutral) to R (Reverse) , D (Drive) or L (Low).
5-16 Starting and driving WARNING Apply the parking brake if the shift lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage.
SSD0863 Overdrive (O/D) OFF switch (if so equipped) When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the indicator light in the instrument panel illuminates. Use the overdrive off mode when you need improved engine braking.
5-18 Starting and driving SSD0864 Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed. T o move the shift lever, perform the following procedure: 1.
applied. SSD0552 Shifting T o change gears, or when upshifting or down- shifting, fully depress the clutch pedal, shift into the appropriate gear, then slowly and smoothly release the clutch pedal. Start the vehicle in 1st gear and shift to 2nd, 3rd, 4th, 5th and 6th gear in sequence accord- ing to vehicle speed.
5-20 Starting and driving For normal acceleration in high altitude areas [over 4,000 ft (1,219 m)]: Gear change MPH (km/h) 1st to 2nd 15 (24) 2nd to 3rd 25 (40) 3rd to 4th 40 (64) 4th to 5th 45 (72) 5th to 6th 51 (82) Suggested maximum speed in each gear Downshift to a lower gear if the engine is not running smoothly , or if you need to accelerate.
SP A2110 T o apply: Pull the parking brake lever up * 1 . T o release: 1. Firmly apply the foot brake. 2. While pulling up on the parking brake lever slightly , push the button * 2 and lower the lever completely * 3 . 3. Before driving, be sure the brake warning light goes out.
5-22 Starting and driving SSD0861 1. ACCELERA TE/RESUME switch 2. COAST/SET switch 3. CANCEL switch 4. MAIN (ON·OFF) switch CRUISE CONTROL OPERA TIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal.
CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to ob- tain maximum engine performance and ensure the future reliability and econo- my of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.
5-24 Starting and driving fuel and reduces emissions. 8. Buy an automated pass for toll roads. . Automated passes permit drivers to use special lanes to maintain cruising speed through the toll and avoid stopping and starting. 9. Winter warm up. . Limit idling time to minimize impact to fuel economy .
SSD0488 WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle.
5-26 Starting and driving center of the road if it moves. 4. Models with Intelligent Key system: Place the ignition switch in the OFF position. Models without Intelligent Key system: Place the ignition switch in the L OCK position and remove the key .
BRAKING PRECAUTION S The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly. This is not a malfunction and indicates that the brake assist mechanism is operating properly .
5-28 Starting and driving Tire and Loading Information label. See “Tire and loading information label” (P .9-11) of this manual. — For detailed information, see “Wheels and tires” (P .
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving con- ditions, the VDC system helps to perform the following functions. . Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.
5-30 Starting and driving NISSAN recommended or are extre- mely deteriorated, the VDC system may not operate properly and the VDC warning light may illumi- nate. . If engine control related parts are not NISSAN recommended or are extremely deteriorated, the VDC warning light may illuminate.
TIRE EQUIPMENT SUMMER tires have a tread designed to provide superior performance on dry pavement. How- ever, the performance of these tires will be substantially reduced in snowy and icy condi- tions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON tires on all four wheels.
5-32 Starting and driving MEMO 5-32 Starting and driving MEMO.
6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Emergency engine shut off (models with Intelligent Key system) ................................................................................ 6-2 Flat tire .
6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road.
TIRE PRESSURE MONIT ORING S Y S- TEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare.
6-4 In case of emergency WARNING . Make sure the parking brake is securely applied and the Manual T ransmission is shifted into R (Re- verse) , or the Continuously V ariable T ransmission into P (Park) . . Never change tires when the vehicle is on a slope, ice or slippery areas.
SCE0811 Spare tire Spare tire: The spare tire is stored under the rear of the vehicle. 1. Open the back door. 2. Open the bolt cover * 1 . 3. Loosen the bolt * 2 counterclockwise ap- proximately 25 turns using the wheel nut wrench to lower the spare tire.
6-6 In case of emergency SCE0630 Removing wheel cover (if so equipped) WARNING Never use your hands to remove the wheel cover. This may cause personal injury. T o remove the wheel cover, use the jack rod * 1 as illustrated. Apply cloth * 2 between the wheel and jack rod to prevent damaging the wheel and wheel cover.
SCE0812 Jack-up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown.
6-8 In case of emergency SCE0576 Installing the spare tire The spare tire is designed for emergency use. (See specific instructions under the heading “Wheels and tires” (P .8-30) .) 1. Clean any mud or dirt from the surface between the wheel and hub.
SCE0828 Securely store the damaged tire in the cargo area as illustrated. The spare tire basket cannot be used for the conventional tire. Return the spare tire basket to its original position in the reverse order of removal. (See “Getting the spare tire and tools” (P .
6-10 In case of emergency T o start your engine with a booster battery, the instructions and precautions below must be followed. WARNING . If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle.
SCE0862 WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle * B , position the two vehicles ( * A and * B ) to bring their batteries into close proximity to each other.
6-12 In case of emergency wait 10 seconds before trying again. 9. After starting your engine, carefully discon- nect the negative cable and then the positive cable ( * 4 ? * 3 ? * 2 ? * 1 ). 10. Replace the vent caps (if so equipped) . Be sure to dispose of the cloth used to cover the vent holes as it may be contaminated with corrosive acid.
Do not stop the engine. 3. T urn off the air conditioner (if so equipped) . Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed. 4. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood.
6-14 In case of emergency When towing your vehicle, all State and local regulations for towing must be followed. Incor- rect towing equipment could damage your vehicle. T owing instructions are available from a NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing.
SCE0814 T OWING RECOMMENDED B Y NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
6-16 In case of emergency Distance: Less than 50 miles (80 km) . Four wheels on the ground: Speed: Below 60 MPH (96 km/h) Distance: Less than 500 miles (800 km) SCE0815 Front SCE0833 VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle.
SCE0678 Rear Rear: Do not use the tie down hook to pull the vehicle. CAUTION . T ow chains or cables must be at- tached only to the vehicle recovery hook or main structural members of the vehicle. Otherwise, the vehicle body will be damaged. . Do not use the vehicle tie down hook to free a vehicle stuck in sand, snow, mud, etc.
6-18 In case of emergency MEMO 6-18 In case of emergency MEMO.
7 Appearance and care Cleaning exterior ....................................................................... 7-2 Washing ................................................................................. 7-2 Waxing ..................................
7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory stores.
7-4 Appearance and care TIRE DRESSING NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a com- pound.
may damage the lens cover. AIR FRESHENERS Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: . Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces.
7-6 Appearance and care SAI0054 Bracket positions The illustration shows the location of the floor mat brackets. SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them.
T emperature A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process.
7-8 Appearance and care MEMO 7-8 Appearance and care MEMO.
8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ..................................
8-2 Maintenance and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle good mechan- ical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts.
8-4 Maintenance and do-it-yourself Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washers operate properly and that the wipers do not streak.
When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
8-6 Maintenance and do-it-yourself improper servicing may result in operating difficulties or excessive emissions, and could affect your warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. SSI0564 MR18DE ENGINE* 1.
SDI2394 Removing the resonator Remove the resonator * A if necessary. Pull the resonator upward to remove it. Install the resonator securely after any inspection or maintenance work is performed.
8-8 Maintenance and do-it-yourself . The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Anti.
SDI2386 CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
8-10 Maintenance and do-it-yourself SDI1978 1. Oil filler cap 2. Oil drain plug 3. Oil filter Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug with a wrench and completely drain the oil.
After the operation 1. Install the engine undercover into position as the following steps. a. Pull the center of the small plastic clips out. b. Hold the engine undercover into position. c. Insert the clips through the undercover into the holes in the frame, then push the center of the clips in to lock the clips in place.
8-12 Maintenance and do-it-yourself For additional brake and clutch fluid information, see “Capacities and recommended fuel/lubri- cants” (P .9-2) of this manual. WARNING . Use only new fluid from a sealed container. Old, inferior or contami- nated fluid may damage the brake and clutch systems.
conditions require an increased amount of window washer fluid. Recommended fluid: Genuine NISSAN Wind- shield W asher Concentrate Cleaner & Anti- freeze or equivalent CAUTION . Do not substitute engine anti-freeze coolant for window washer solution.
8-14 Maintenance and do-it-yourself DI0137MA Check the fluid level in each cell. It should be between the UPPER LEVEL * 1 and L OWER LEVEL * 2 lines. If it is necessary to add fluid, add only distilled water to bring the level to the indicator in each filler opening.
CAUTION . Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. . Use electrical accessories with the engine running to avoid discharging the vehicle battery.
8-16 Maintenance and do-it-yourself WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs.
flame if the engine backfires. If it is not there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed. . Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed.
8-18 Maintenance and do-it-yourself SDI1803 REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push and hold the release tab * A , and move the wiper blade down the wiper arm * 1 . 3. Insert the new wiper blade onto the wiper arm until a click sounds.
Contact a NISSAN dealer if checking or replacement is required. If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied.
8-20 Maintenance and do-it-yourself SDI1959 ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse.
SDI1869 Fusible links If any electrical equipment does not operate and the fuses are in good condition, check the fusible links in the holders * 1 , * 2 and * 3 .I f any of these fusible links are melted, replace only with genuine NISSAN parts. For checking and replacing the fusible links in the holders * 2 and * 3 , see a NISSAN dealer.
8-22 Maintenance and do-it-yourself SDI1753 4. If the fuse is open * A , replace it with a new fuse * B . 5. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer.
CAUTION Be careful not to allow children to swallow the battery and removed parts. SDI2134 KEYFOB Replace the battery in the keyfob as follows: 1. Remove the screw. 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part.
8-24 Maintenance and do-it-yourself compliance could void the user’s authority to operate the equipment. SDI2451 INTELLIGENT KEY Replace the battery in the Intelligent Key as follows: 1.
SDI2452 4. Align the tips of the upper and lower parts * 1 , and then push them together * 2 until it is securely closed. 5. Operate the buttons to check its operation. See a NISSAN dealer if you need any assistance for replacement. FCC Notice: This device complies with Part 15 of the FCC Rules.
8-26 Maintenance and do-it-yourself SDI2497 1. Front turn signal light 2. Headlight (high-beam/low-beam) 3. Front side marker/parking light 4. Map light 5. Ceiling light 6. Front fog light (if so equipped) 7. Side turn signal light 8. High-mounted stop light 9.
Replacing Halogen headlight model: The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. CAUTION . Do not leave the bulb out of the headlight reflector for a long period of time. Dust, moisture, smoke, etc . entering the headlight body may affect bulb performance.
8-28 Maintenance and do-it-yourself EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight high/low beams (Halogen) 60/55 HB2 Front turn signal light* 21 PY21W Front fog light (if so equippe.
SDI2391 Map light SDI1845 Ceiling light SDI2392 Cargo light Maintenance and do-it-yourself 8-29 SDI2391 Map light SDI1845 Ceiling light SDI2392 Cargo light Maintenance and do-it-yourself 8-29.
8-30 Maintenance and do-it-yourself If you have a flat tire, see “Flat tire” (P.6-3) . TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It monitors tire pressure of all tires except the spare.
SDI2503 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “Vehicle load- ing information” (P .9-13) . * 3 Original size: The size of the tires originally installed on the vehicle at the factory .
8-32 Maintenance and do-it-yourself SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem.
SDI1575 Example TIRE LABELING Federal law requires tire manufacturers to place standardized information on the side- wall of all tires. This information identifies and describes the fundamental character- istics of the tire and also provides the tire identification number (TIN) for safety stan- dard certification.
8-34 Maintenance and do-it-yourself SDI1607 Example * 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Department of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number.
TYPES OF TIRES WARNING . When changing or replacing tires, be sure all four tires are of the same type (Example: Summer, All Season or Snow) and construction. A NISSAN dealer may be able to help you with information about tire type, size, speed rating and availability.
8-36 Maintenance and do-it-yourself equipped tire size. Other types may damage your vehicle. Use chain tensioners when re- commended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody .
SDI1663 1. W ear indicator 2. W ear indicator location mark Tire wear and damage WARNING . Tires should be periodically in- spected for wear, cracking, bul- ging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.
8-38 Maintenance and do-it-yourself accident and personal injury. . If the wheels are changed for any reason, always replace with wheels which have the same off-set dimen- sion. Wheels of a different off-set could cause premature tire wear, degrade vehicle handling character- istics and/or interference with the brake discs/drums.
. With the TEMPORARY USE ONL Y spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h) . . When driving on roads covered with snow or ice, the TEMPORARY USE ONL Y spare tire should be used on the rear wheels and original tire used on the front wheels (drive wheels) .
8-40 Maintenance and do-it-yourself MEMO 8-40 Maintenance and do-it-yourself MEMO.
9 T echnical and consumer information Capacities and recommended fuel/lubricants ................... 9-2 Fuel recommendation ......................................................... 9-4 Engine oil and oil filter recommendation .......................
9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.
Window washer fluid 1-1/4 gal 1 gal 4.5 Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent T echnical and consumer information 9-3 Window washer fluid 1-1/4 gal 1 gal 4.
9-4 T echnical and consumer information FUEL RECOMMEND A TION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control system, and may also affect warranty coverage.
blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles.
9-6 T echnical and consumer information JVT0159X ENGINE OIL AND OIL FIL TER RE- COMMENDA TION 1. API certification mark 2. API service symbol Selecting the correct oil It is essential to choose the co.
interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes. . repeated short distance driving at cold outside temperatures . driving in dusty conditions .
9-8 T echnical and consumer information ENGINE Model MR18DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder, in-line Bore 6 Stroke in (mm) 3.307 6 3.193 (84.0 6 81.1) Displacement cu in (cm 3 ) 109.65 (1,798) Firing order 1-3-4-2 Idle speed rpm No adjustment is necessary.
DIMENSIONS AND WEIGHTS Overall length in (mm) 156.7 (3,980)*1 156.5 (3,975)*2 Overall width in (mm) 66.7 (1,695) Overall height in (mm) 66.1 (1,680) Front tread in (mm) 58.1 (1,475) Rear tread in (mm) 58.3 (1,480) Wheelbase in (mm) 99.6 (2,530) Gross Vehicle Weight Rating (GVWR) lb (kg) See the F .
9-10 T echnical and consumer information STI0637 VEHICLE IDENTIFICA TION NUMBER (chassis number) The vehicle identification number is located as shown. Remove the cover to access the number. STI0466 ENGINE SERIAL NUMBER The number is stamped on the engine as shown.
STI0638 EMISSION CONTROL INFORMA TION LABEL The emission control information label is at- tached to the underside of the hood as shown. STI0494 TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as shown.
9-12 T echnical and consumer information STI0647 Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . J-nut 6 2 . Screw 6 2 .
7. Carefully drill the two pilot holes using a 0.39 in (10 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 8. Insert grommets into the hole on the fascia. 9. Insert a flat-blade screwdriver into the grommet hole to add a 90 8 turn onto the part * E .
9-14 T echnical and consumer information cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the subtracted weight of occu- pants from the load limit.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs.
9-16 T echnical and consumer information WARNING . Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION . Failure to follow these guidelines can result in severe transmission damage.
9-18 T echnical and consumer information WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying NISSAN.
9-20 T echnical and consumer information of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed.
10 Index A A/C (Air Conditioner) operation .............................. 4-16 ABS (Anti-lock Braking System) ............................ 5-27 Advanced air bag system ......................................... 1-47 Air bag system Advanced air bag system .
10-2 Checking engine coolant level ............................. 8-8 Corrosion protection .................................................... 7-6 Cruise control ............................................................... 5-21 Cup holders.........
Headlights Bulb replacement ................................................. 8-26 Headlight switch ................................................... 2-24 Heater Heater and air conditioner operation .............. 4-14 Hood release..................
10-4 Mirror Inside mirror........................................................... 3-24 Outside mirrors..................................................... 3-25 V anity mirror ........................................................... 3-26 Monitor, Rearview monitor.
Shift lever Shift lock release .................................................. 5-18 Shift lock release T ransmission.......................................................... 5-18 Shifting CVT (Continuously V ariable T ransmission) ................
10-6 V ehicle dynamic control (VDC) off switch ..... 2-28 V ehicle dynamic control (VDC) system.......... 5-29 V ehicle dynamic control (VDC) warning light .......................................................... 2-16 V entilators ..................
MEMO 10-7 MEMO 10-7.
FUEL RECOMMEND A TION: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control systems, and may also affect warranty coverage.
® 2014 cube OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2014 N I SSAN cube Z12-D Z12-D Printing : September 2013 (18) Publication No.
Een belangrijk punt na aankoop van elk apparaat Nissan Cube (2014) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan Cube (2014) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan Cube (2014) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan Cube (2014) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan Cube (2014) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan Cube (2014) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan Cube (2014) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan Cube (2014) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
