Gebruiksaanwijzing /service van het product GTR (2015) van de fabrikant Nissan
Ga naar pagina of 355
I n f o r m a t i o n P r o v i d e d b y :.
Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilometers) of driving pleasure.
WHEN READING THE MANUAL This manual includes information for all features and equipment available on this model. Features and equipment in your vehicle may vary depending on model, trim level, options selected, order, date of production, region or availability.
If you see the symbol above, it means “Do not do this” or “Do not let this happen” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action.
NISSAN CUSTOMER CARE PROGRAM NISSAN CARES ... Both NISSAN and your G T-R certified NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your G T -R certified NISSAN dealer are our primary concerns.
GT -R Overview GTR Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, ai.
.
GT -R Overview G T -R specific information ............................................... G TR-3 Warranty information .................................................. GTR-3 Maintenance information ........................................... GTR-3 G T -R special specification parts .
Change of surface color of titanium muffler (if so equipped) ......................................................... G TR-26 Sound heard around titanium muffler (if so equipped) ......................................................... G TR-27 Dry carbon fiber parts (if so equipped) .
The GT -R is NISSAN’s first supercar category vehicle. The G T -R is equipped with special systems. These systems are different than those used on conventional vehicles to allow for the high performance driving characteristics of this vehicle. Y our vehicle should be maintained by a G T -R certified NISSAN dealer.
G TR-4 GT -R Overview engine oils may cause internal engine damage. Engine oil maintenance . When the vehicle is delivered, the engine oil level is 0.39 in (10 mm) below the H mark on the engine oil dipstick for optimum high performance driving. The engine oil can be filled up to the H mark if not engaging in performance driving.
TIRES AND ROAD WHEELS Tires The GT -R uses specially designed run-flat tires and matching road wheels. Use of these specially developed tires and wheels provides the greatest potential for maximum performance.
G TR-6 GT -R Overview certified technician must inspect the vehicle and determine that only the brake pads need to be replaced. In this case, replacing all brake pads and disc rotors as a set is not necessary .
been tested on a test circuit to ensure the suspension components “settle” prior to ship- ping. Following this circuit test the odometer reading at the time of vehicle shipment is as listed. Please note a small amount of additional mileage may have been added in the subse- quent onward transportation.
G TR-8 GT -R Overview use that mixture to clean the parts. NOTE: The surfaces of the dry carbon fiber parts are lightly coated like a race car so that you can feel the proper texture of real carbon, which may feel rough.
rates and wear patterns in comparison to conventional passenger vehicles. Contact a G T -R certified NISSAN dealer to confirm that the alignment is within specifications. Preventing toe-out: T oe-out can cause uneven tire wear or damage to areas inside the tires due to high heat.
G TR-10 GT -R Overview . Drive with the suspension setup switch in the COMF mode to allow more suspension stroke. 600 to 1,200 miles (1,000 to 2,000 km): . Drive with the engine speed kept relatively high with the shift lever in the & M position. Shifting is recommended between 1st and 4th gears.
component(s) by overheating or ex- cessive force. . Damage to the powertrain or any drivetrain component(s) that occurs when there is a record in the Vehicle Status Data Recorder (VSDR) that the vehicle was driven with VDC off during the period when the damage was incurred is excluded from war- ranty coverage.
G TR-12 GT -R Overview FUEL NISSAN recommends using fuels that contain no alcohol. However, fuels containing up to 10% alcohol may be used, if necessary.
PRECAUTIONS ON PERFORMA NCE DRIVING The information and specifications in this section apply only when engaging in performance driving. Checking the temperature of the coolant and oils on the multi fu.
G TR-14 GT -R Overview vehicle is refueled when the vehicle is hot, the fuel pump may automatically shut off before the tank is full. This does not indicate that there is a malfunction.
. Adjust the power steering fluid level to the R mark * 5 on the power steering dipstick when the fluid temperature is hot or * 6 when the fluid temperature is cold.
G TR-16 GT -R Overview NO TICE Failure to have the clutch properly adjusted before performance driving may cause the transmission oil tem- perature to increase which may cause transmission damage. . Inspect and confirm the clearance between the exhaust finisher and rear bumper is more than 0.
WARNING Keep your tires inflated to the correct tire pressure. Driving with low tire pressure can damage some powertrain systems and affect the operation of the ABS and VDC systems. Low Tire pres- sure may also cause tire failure and result in serious personal injury or death.
G TR-18 GT -R Overview the wheels. The tire may slip on the wheel if the vehicle is driven in these conditions before 48 hours have passed. If the tire slips on the wheel, the wheel/tire assembly will be out of balance and will require rebalancing.
Recommended fluids and maintenance interval The information and specifications in this section apply only when engaging in performance driving. ITEMS Engine Oil G T -R SPECIFIED FLUIDS Mobil 1 (0W-40)*1 MAINTENANCE INTERVAL .
G TR-20 GT -R Overview ITEMS T ransmission Oil G T -R SPECIFIED FLUIDS Genuine NISSAN T ransmission Oil R35 Special MAINTENANCE INTERVAL . When the oil temperature stays below 248 8 F (120 8 C) while driving Change transmission oil at the same interval as Schedule 1 and 2 in the 2015 NISSAN GT -R Service and Maintenance Guide.
ITEMS Brake Fluid G T -R SPECIFIED FLUIDS Genuine NISSAN Brake Fluid R35 Special II*3 MAINTENANCE INTERVAL Change brake fluid every 3,000 miles (5,000 km) .
G TR-22 GT -R Overview Suspension and wheel alignment . Check the steering and suspension system and other links for loose and/or damaged parts. . Measure and adjust the wheel alignment. Contact a G T -R certified NISSAN dealer to adjust the wheel alignment to the recom- mended setting for normal driving.
REFUELING PRECAUTIONS WARNING Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire. The fuel tank is full at the first automatic shutoff.
G TR-24 GT -R Overview 158 8 F (70 8 C) , drive the vehicle until it reaches normal operating temperature. If the temperature is higher than 230 8 F (110 8 C) , perform cool- down driving procedure.
Additionally, the brakes must be dry before parking the vehicle after driving on wet roads or after washing the vehicle. If the roads are wet, lightly apply the brakes for a short distance before parking the vehicle to dry the brakes.
G TR-26 GT -R Overview BRAKE SY STEM INFORMA TION Cracks on brake pad The friction material of the G T -R disc brake pad is bonded to the pad backing plate more strongly than conventional brake pads to with- stand the high brake temperatures. The friction material and backing plate expand due to heat at different rates.
SOUND HEARD AROUND TITANIUM MUFFLER (if so equipped) When stopping the engine (rapid cooling) , you may hear a metal-rubbing sound or unusual ticking sound because of the differential thermal expansion between the inner and outer pipes of the muffler.
G TR-28 GT -R Overview TRANSMISSION OPERA TION CHARACTERISTI CS Mechanism Operation characteristic s Base Manual transmission . The G T -R transmission design is different from transmissions used in conventional passenger cars.
Mechanism Operation characteristic s Electronically-controlled All-wheel drive (A WD) If the vehicle accelerates from a stop with the steering wheel turned half a turn in cold temperatures, it may be hard to move the vehicle when the accelerator pedal is depressed.
G TR-30 GT -R Overview MEMO I n f o r m a t i o n P r o v i d e d b y :.
0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ........................................................................... 0-2 Front ...........................................................................
0-2 Illustrated table of contents FRONT 1. Seat belt (Page 1-6) 2. Rear seat walk -in lever (P .1-5) 3. Roof-mounted curtain side-impact supplemental air bag system (P .1-34) 4. Supplemental front-impact air bags (P .1-34) 5. Seat belt pretensioner (P .
REAR 1. Rear seats — Child restraint installation (P .1-15) 2. Child restraint anchor points (for top tether strap child restraint) (P .1-19) 3. LA TCH (Lower Anchors and T ethers for CHil- dren) system (P .
0-4 Illustrated table of contents FRONT 1. Hood (P .3-18) 2. Windshield wiper and washer (P .2-48, P .8-22) 3. Doors (P .3-2, P .3-4, P .3-8) 4. Outside mirrors (P .3-28) 5. Power windows (P .2-60) 6. Daytime running light (P .2-50) 7. Headlight and turn signal (P .
replaced. *2: “Replacement of brake pads and disc rotors” page G TR-5 Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC) unit and other related parts were specially designed for this brake fluid.
0-6 Illustrated table of contents REAR 1. High-mounted stop light (P .8-29) 2. T runk (P .3-8, P .3-20) 3. Rear window defroster (P .2-50) 4. Satellite antenna* 5. Rear view camera* 6. Rear combination light (P .8-29) 7. Fuel-filler door (P .3-24, P .
1. Coat hooks (P .2-59) 2. Inside lock knob (P .3-5) 3. Interior light control switch (P .2-62) 4. Map lights (P .2-62) 5. Sun visors (P .3-27) 6. Sunglasses holder (P .2-57) 7. Inside rearview mirror (P .2-64, P .3-27) 8. Center console box (P .2-59) — USB memory operation* — iPod player operation* 9.
0-8 Illustrated table of contents 1. Headlight and turn signal switch (P .2-50) 2. Paddle shifters (P .5-15) 3. Steering-wheel-mounted controls (left side)* 4. Meters and gauges (P .2-5) 5. Steering-wheel-mounted controls (right side) — MRK (Mark) switch* — Cruise control (P .
1. Outside mirror control switch (P .3-28) 2. Center dial* 3. Audio system* 4. Heater and air conditioner* 5. Multi function display* 6. Hazard warning flasher switch (P .6-2) 7. Glove box (P .2-58) 8. Fuse box cover (P .8-24) 9. Power outlet (P .2-55) 10.
0-10 Illustrated table of contents 1. T rip A/B reset switch (P .2-6) 2. Speedometer (P .2-6) 3. T achometer (P .2-7)/Upshift indicator (P .2-9) 4. T ransmission position indicator (P .2-9) 5. Engine coolant temperature gauge (P.2-7) 6. ENTER switch (P .
1. Fuse/fusible link holder (P .8-24) 2. Battery (P .8-17) 3. Engine oil filler cap (P .8-13) 4. Engine oil dipstick (P .8-13) 5. Brake fluid reservoir (P .8-15) 6. Air cleaner (P .8-21) 7. Power steering fluid reservoir (P .8-14) 8. Radiator filler cap (P .
0-12 Illustrated table of contents Warning light Name Page All-Wheel Drive (AWD) warning light 2-25 Anti-lock Braking System (ABS) warning light 2-26 Brake warning light 2-26 Charge warning light 2-27.
1 Safety — Seats, seat belts and supple- mental restraint system Seats ........................................................................................... 1-2 Front seats ......................................................................
1-2 Safety — Seats, seat belts and supplemental restraint system WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries.
FRONT SEA TS Front power seat adjustment Operating tips . The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. . Do not operate the power seat switch for a long period of time when the engine is off.
1-4 Safety — Seats, seat belts and supplemental restraint system Seat Adjustment Switch Operation Location Forward and backward * A Move the switch * A forward or backward until the desired seat position is obtained.
Rear seat walk-in This feature makes it easier to get in and out of the rear seat. Use the following procedure when getting in and out of the rear seat.
1-6 Safety — Seats, seat belts and supplemental restraint system The illustration shows the seating positions equipped with head restraint/headrest. Indicates the seating position is equipped with a head restraint. + Indicates the seating position is not equipped with a head restraint or headrest.
WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint. . The seat belt should be properly adjusted to a snug fit.
1-8 Safety — Seats, seat belts and supplemental restraint system . Be sure the seat belt tongue is securely fastened to the proper buckle. . Do not wear the seat belt inside out or twisted. Doing so may reduce its effectiveness. . Do not allow more than one person to use the same seat belt.
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest.
1-10 Safety — Seats, seat belts and supplemental restraint system Fastening the seat belts 1. Adjust the seat. ( “Seats” page 1-2) 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage.
of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during impacts. The Automatic Locking Retractor (ALR) mode or child restraint mode locks the seat belt for child restraint installation.
1-12 Safety — Seats, seat belts and supplemental restraint system quickly. The retractor should lock and restrict further belt movement. If the retractor does not lock during this check or if you have any question about seat belt operation, see a G T-R certified NISSAN dealer.
collision or a sudden stop. SEA T BEL T MAINTE NANCE . T o clean the seat belt webbing, apply a mild soap solution or any solution recom- mended for cleaning upholstery or carpets. Then, wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry .
1-14 Safety — Seats, seat belts and supplemental restraint system restraints for infants and small children. ( “Child restraints” page 1-15) A child restraint may be secured in the vehicle by using either the LA TCH (Lower Anchor and T ethers for CHildren) system or with the vehicle seat belt.
PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- stallation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child restraint must be used and installed properly.
1-16 Safety — Seats, seat belts and supplemental restraint system front passenger seat. — Keep seatbacks as upright as possible after fitting the child restraint. — Infants and children should al- ways be placed in an appropri- ate child restraint while in the vehicle.
LA TCH label location Lower Anchors and T ethers for CHildren System (LA TCH) Y our vehicle is equipped with special anchor points that are used with the LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system.
1-18 Safety — Seats, seat belts and supplemental restraint system LA TCH lower anchor location LA TCH lower anchor location The LA TCH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH anchors.
T op tether anchor point locations Anchor points are located on the rear parcel shelf. WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle.
1-20 Safety — Seats, seat belts and supplemental restraint system Rear-facing rigid-mounted — step 2 Rear-facing — step 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments.
5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. REAR-FACING CHILD RESTRAIN T INST ALLA TION USING THE SEAT BEL TS WARNING The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint.
1-22 Safety — Seats, seat belts and supplemental restraint system Rear-facing — step 1 Refer to all Warnings and Cautions in “Child safety” and “Child restraints” before installing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.
Rear-facing — step 3 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
1-24 Safety — Seats, seat belts and supplemental restraint system Rear-facing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path.
Forward-facing rigid-mounted — step 2 3. The back of the child restraint should be secured against the vehicle seatback. If the seating position is interfering with the proper child restraint fit, try another seating position or a different child restraint.
1-26 Safety — Seats, seat belts and supplemental restraint system child restraint is loose, repeat steps 1 through 6. Installing top tether strap WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints.
FORWARD-FACING CHILD RE- STRAINT INST ALLATION USING THE SEA T BEL TS WARNING The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured.
1-28 Safety — Seats, seat belts and supplemental restraint system Forward-facing — step 3 3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.
Forward-facing — step 6 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7.
1-30 Safety — Seats, seat belts and supplemental restraint system Forward-facing — step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate.
BOOSTER SEA TS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: . Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach.
1-32 Safety — Seats, seat belts and supplemental restraint system All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated.
Outboard position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If the seating position is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips.
1-34 Safety — Seats, seat belts and supplemental restraint system 7. If the booster seat is installed in the front passenger seat, push the ignition switch to the ON position. The front passenger air bag status light may or may not illuminate depending on the size of the child and the type of booster seat used.
Sit upright and well back. Sit upright and well back. WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower se- verity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
1-36 Safety — Seats, seat belts and supplemental restraint system back against the seatback and as far-away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened.
WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations.
1-38 Safety — Seats, seat belts and supplemental restraint system Do not lean against doors or windows. Do not lean against doors or windows. WARNING Front seat-mounted side-impact sup- plemental air bag and roof-mounted curtain side-impact supplemental air bag : .
tions are shown in the previous illustrations. . When sitting in the rear seat, do not hold onto the seatback of the front seat. If the supplemental side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained.
1-40 Safety — Seats, seat belts and supplemental restraint system 1. Crash zone sensor 2. Supplemental front-impact air bag modules (NISSAN Advanced Air Bag System) 3. Front seat-mounted side-impact supplemental air bags 4. Roof-mounted curtain side-impact supplemental air bags 5.
and seat belt usage for the driver. For the front passenger, the occupant classification sensor is also monitored. Based on information from the sensors, only one front air bag may inflate in a crash, depending on the crash severity and whether the front occupants are belted or unbelted.
1-42 Safety — Seats, seat belts and supplemental restraint system increase the risk or severity of injury in an accident. Status light : The front passenger air bag status light is located on the center instrument panel.
classification sensor. Other conditions could also result in air bag inflation, such as if a child is standing on the seat, or if two children are on the seat, contrary to the instructions in this manual. Always be sure that you and all vehicle occupants are seated and restrained properly.
1-44 Safety — Seats, seat belts and supplemental restraint system bag system and result in serious personal injury. . Immediately after inflation, several front air bag system components will be hot. Do not touch them; you may severely burn yourself.
FRONT SEA T -MOUNTED SIDE-IM- PACT SUPPLEMENTAL AIR BAG AND ROOF-MOU NTED CURTAIN SIDE-IMPACT SUPPLEMENTAL AIR BAG SY STEMS The front side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails.
1-46 Safety — Seats, seat belts and supplemental restraint system . No unauthorized changes should be made to any components or wiring of the side air bags and curtain air bags. This is to prevent damage to or accidental inflation of the side air bag and curtain air bag systems.
helping to restrain front seat occupants. The pretensioner is encased with the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a preten- sioner activates, smoke is released and a loud noise may be heard. The smoke is not harmful, and it does not indicate a fire.
1-48 Safety — Seats, seat belts and supplemental restraint system . The supplemental air bag warning light remains on after approximately 7 seconds. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all.
2 Instruments and controls Cockpit ....................................................................................... 2-3 Instrument panel ....................................................................... 2-4 Meters and gauges .............
Cruise control system warning .................................... 2-40 Low fuel warning ............................................................. 2-40 Door/trunk open warning .............................................. 2-41 Headlight system warning .
1. Headlight and turn signal switch (P .2-50) 2. Paddle shifters (P .5-15) 3. Steering-wheel-mounted controls (left side)* 4. Meters and gauges (P .2-5) 5. Steering-wheel-mounted controls (right side) — MRK (Mark) switch* — Cruise control (P .5-34) 6.
2-4 Instruments and controls 1. Outside mirror control switch (P .3-28) 2. Center dial* 3. Audio system* 4. Heater and air conditioner* 5. Multi function display* 6. Hazard warning flasher switch (P .6-2) 7. Glove box (P .2-58) 8. Fuse box cover (P .8-24) 9.
1. T rip A/B reset switch (P .2-6) 2. Speedometer (P .2-6) 3. T achometer (P .2-7)/Upshift indicator (P .2-9) 4. T ransmission position indicator (P .2-9) 5. Engine coolant temperature gauge (P.2-7) 6. ENTER switch (P .2-15) 7. Instrument brightness control switch (P.
2-6 Instruments and controls SPEEDOMETER The speedometer indicates the vehicle speed. CAUTION . For cleaning, use a soft cloth, dam- pened with water. Never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent.
RESET switch for more than 1 second. NOTE: When the battery is disconnected, the memory for trips & A and & B is erased, and both return to zero. T ACHOMETER The tachometer indicates the engine speed in revolutions per minute (rpm) . Do not rev the engine into the red zone * 1 .
2-8 Instruments and controls NO TICE If the gauge indicates engine coolant temperature near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If gauge is over the normal range, stop the vehicle as soon as safely possible.
TRANSMISSION POSITION INDICA- TO R The transmission position indicator indicates the gear positions. The indicator blinks if it is not possible to shift the gear when in the & M position. 1. Upshift indicator (green) 2. Upshift indicator (yellow) 3.
2-10 Instruments and controls Setting Push the ignition switch to the ON position. Use the ENTER switch and toggle the vehicle information display to show the SETTING screen.
to go to ALERT > UPSHIFT. The current status of the upshift indicator will be shown on the UPSHIFT screen. Note that the function is set to AUT O as the factory default setting. T o change the upshift indicator mode, choose SETTING on the UPSHIFT screen.
2-12 Instruments and controls NOTE: . The instrument brightness can be ad- justed separately for daytime and nighttime conditions. The adjusted set- tings are automatically stored. . When the battery terminal is discon- nected, the set memory will be erased and the setting returns to the default.
NOTE: The engine oil level can be displayed after the “OIL LEVEL OK” display turns off or while the engine is started and running. ( “Maintenance” page 2-20) When the oil level is low If the message shown above is displayed, the engine oil level is low .
2-14 Instruments and controls When the oil level sensor malfunc- tion occurs If the message shown above is displayed, the engine oil level sensor may be malfunctioning.
1. ENTER switch 2. NEXT switch 3. V ehicle information display The drive computer displays the following information: . Current fuel consumption . V ehicle speed . Cruise control . Average fuel consumption and speed . Elapsed time and trip computer . Distance to empty .
2-16 Instruments and controls VEHICLE SPEED This displays the vehicle speed while driving. CRUISE CONTROL This displays the set cruise control status. NOTE: The cruise control display is shown if cruise control is set.
NOTE: . “ ” is displayed during the first 1/3 mile (500 m) or the first 30 seconds after a reset. . The values are updated approximately every 30 seconds. ELAPSED TIME AND TRIP OD- OMETER This displays the elapsed time and trip odometer beginning from the time when the display was last reset.
2-18 Instruments and controls on the driving conditions. This does not indicate that there is a malfunction. . The values are updated approximately every 30 seconds. OUTSIDE AIR TEMPERATURE This displays the outside air temperature. NOTE: . The outside air temperature may not be displayed correctly in the following cases.
SETTING (drive computer) This is used to set the alert, maintenance and optional settings. Use the NEXT switch to select an item, then confirm with the ENTER switch to change to the corresponding setting screen. T o return to the initial setting screen, push and hold the ENTER switch for more than 1 second.
2-20 Instruments and controls “TIMER” indicator: This alert informs the driver that the set driving time has elapsed. On the TIMER screen, push the NEXT switch to change the time. Push and hold the switch to increase the number every 1 hour. A maximum of 6 hours can be set.
switch to change the mileage. Push and hold the switch to increase the number every 600 miles (1,000 km) . . Set to “—” to set no reminders. . T o reset the accumulated mileage to zero, go to the RESET screen, then push the NEXT switch and confirm with the ENTER switch .
2-22 Instruments and controls Engine oil filter: The reminder is displayed when the customer set mileage is exceeded. Select SETTING > MAINTENANCE > FIL TER to set or reset the mileage for the engine oil filter change. NOTE: The default setting is 9,500 miles (15,000 km) .
tion, alignment, driving habits and road conditions affect tire wear and when tires should be replaced. Setting the tire maintenance reminder for a certain driving distance does not mean your tires will last that long. Use the tire maintenance reminder as a guide only and always perform regular tire checks.
2-24 Instruments and controls among them. T o return to the initial warning, push and hold the ENTER switch for more than 1 second. NOTE: If there are no warnings to display, only “SKIP” can be selected.
All-Wheel Drive (A WD) warning light Low tire pressure warning light Cruise set switch indicator light Anti-lock Braking System (ABS) warning light Master warning light Exterior light indicator Seat b.
2-26 Instruments and controls Pull off the road in a safe area, and idle the engine. The driving mode will change to RWD to prevent the AWD system from malfunctioning. If the warning light turns off, you can drive again. This does not indicate that there is a malfunction.
WARNING . Y our brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive care- fully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous.
2-28 Instruments and controls Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. When the low tire pressure warning light illuminates,.
. Although you can continue driving with a punctured run-flat tire, re- member that vehicle handling sta- bility is reduced, which could lead to an accident and personal injury.
2-30 Instruments and controls off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag and pretensioner systems need servicing and your vehicle must be taken to a G T -R certified NISSAN dealer.
When the warning light illuminates, perform cool down driving (driving 1.3 mile (2 km) in 5th or 6th gear at a speed of approximately 37 - 50 MPH (60 - 80 km/h) while checking the temperature of the transmission oil until the warning light goes off.
2-32 Instruments and controls and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/ maintenance test.
Parking brake reminder chime A chime will sound if the vehicle speed is above 4 MPH (7 km/h) with the parking brake applied. Stop the vehicle and release the parking brake. Reverse warning chime The chime will sound inside the vehicle if any of the following conditions occurs.
2-34 Instruments and controls If there are multiple warnings, the warning lights remain lit or continue to blink and the warnings displayed in the vehicle information display are switched at regular intervals. The warnings displayed in the vehicle information display can be switched voluntarily by pushing the ENTER switch .
SHIFT LEVER POSITION WARNING This will appear if the system cannot detect the shift lever position. Stop the vehicle in a safe location. Depress the brake pedal and move this shift lever to another position then move the lever back to the desired position.
2-36 Instruments and controls TRANSMISSION OIL HIGH TEM- PERA TURE WARNING This will appear if the transmission oil tempera- ture becomes unusually high. ( “T ransmission warning light” page 2-30) TRANSMISSION CLUTCH HIGH TEMPERA TURE WARNING This will appear if the transmission clutch temperature becomes unusually high.
LOW BRAKE FLUID WARNING This will appear if the brake fluid level becomes low . ( “Brake warning light” page 2-26) ANTI-LOCK BRAKIN G SY STEM (ABS) WARNING This will appear if the Anti-lock Braking System (ABS) is not functioning properly.
2-38 Instruments and controls AWD CLUT CH HIGH TEMPERATURE WARNING This will appear if the temperature of the AWD clutch becomes unusually high. ( “ All- Wheel Drive (AWD) warning light” page 2-25.
AWD SY STEM WARNING This will appear if the AWD system is not functioning properly while the engine is running. ( “ All-Wheel Drive (A WD) warning light” page 2-25) LOW TIRE PRESSURE WARNING This will appear if the vehicle is being driven with low tire pressure.
2-40 Instruments and controls TIRE PRESSURE MONITORING S Y STEM (TPMS) WARNING This will appear if the Tire Pressure Monitoring System (TPMS) is not functioning properly. ( “Low tire pressure warning light” page 2-27) CRUISE CONTROL SY STEM WARN- ING This will appear if the cruise control system is not functioning properly.
NOTE: . The low fuel warning will appear when the amount of fuel remaining in the tank decreases to approximately 3 US gallons (12 liters) . . The timing of the low fuel warning display may change depending on braking, turning, acceleration, or going up or down hills.
2-42 Instruments and controls LOW WASHER FLUID WARNING This will appear when the washer tank fluid is at a low level. Add washer fluid as necessary. ( “Window washer fluid” page 8-16) NO KEY WARNING This will appear in either of the following conditions.
These displays appear when an appropriate operation is required in starting or stopping the engine. ENGINE START OPERA TION INDI- CA TOR This indicator appears when the shift lever is in the & P position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed.
2-44 Instruments and controls “PUSH” WARNING This warning appears when the shift lever is moved to the & P position with the ignition switch in the ACC position after the SHIFT & P warning appears. If this warning appears, push the ignition switch to the OFF position.
INTELLIGENT KEY REMOVAL INDI- CA TOR This indicator appears when the driver’s door is opened with the ignition switch in the OFF or L OCK position and the Intelligent K ey placed in the Intelligent Key port.
2-46 Instruments and controls The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your Intelligent Key(s) in the vehicle, and always lock it when un- attended.
The alarm is activated by: . Opening the door or the trunk lid without using the button on the Intelligent Key , the door handle request switch or the mechan- ical key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activate.
2-48 Instruments and controls bilizer System service as soon as possible. Please bring all Intelligent Keys that you have when visiting a GT-R certified NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident.
USING THE WIPERS Push the lever down to operate the wiper at the following speed: * 1 INT (Intermittent) — intermittent operation can be adjusted by turning the knob toward * A (Slower) or * B (Faster) .
2-50 Instruments and controls T o defog/defrost the rear window, start the engine and push the switch on. The indicator light on the switch will come on. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes.
T urning the switch to the position: Headlights will come on and all the other lights remain on. The daytime running light will turn off. Autolight system The autolight system allows the headlights to be set so they turn on and off automatically. T o set the autolight system: 1.
2-52 Instruments and controls Headlight beam select When the headlights are on, push the lever to the front of the vehicle * 1 to switch to the high beams. The high-beam indicator light illumi- nates. ( “High beam indicator light” page 2- 31) Pull the lever to the neutral position * 2 to switch to the low beams.
WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. T urn signal Move the lever up or down to the position * 1 to signal the turning direction.
2-54 Instruments and controls The seat heaters can be used when the ignition switch is in the ON position. The front seats are warmed by the built-in heaters. TURNING ON THE HEATERS Push the "HI" or "LO" side of the switch to activate the heaters.
CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. . This power outlet is not designed for use with a cigarette lighter unit.
2-56 Instruments and controls Inside the console box (except for NISMO models) Open the cap to use the outlet. Close the cap after use. CUP HOLDERS CAUTION . Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink.
Rear NOTE: Cup holder * A is wider and shallower than cup holders * B and * C . Small-size cups are likely to tip over in cup holder * A . Use cup holders * B and * C . SUNGLASSES HOLDER WARNING Keep the sunglasses holder closed while driving to prevent an accident.
2-58 Instruments and controls DOOR POCKET Door pockets are located inside the driver’s side and passenger’s side doors. NO TICE Do not grasp the door pockets to open and close the doors. Doing so may damage the pockets. GLOVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
CONSOLE BOX Lift up the lock knob * 1 to open the lid. T o close the center console box, press on the lid until it locks in place. NOTE: The console box contains a power outlet (except for NISMO models) or a USB (Universal Serial Bus) connection port (for NISMO models) .
.
Passenger’s side power window switch The passenger side switch will open or close only the corresponding window. T o open close the window, push down or pull up the switch and hold it. Automatic operation T o fully open or close the window, completely push down or pull up the switch and release it; it does not need to be held.
2-62 Instruments and controls If the power window automatic function does not operate properly after performing the pro- cedure above, have your vehicle checked by a G T -R certified NISSAN dealer. MAP LIGHTS Push the button as illustrated to turn the light on or off.
NOTE: The lights will also turn off after a period of time when the lights remain illuminated after the ignition switch has been pushed to the OFF or LOCK position to prevent the battery from becoming discharged.
2-64 Instruments and controls The HomeLink Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device.
2. Using both hands, simultaneously press and hold the desired HomeLink button and handheld transmitter button. DO NO T re- lease until the HomeLink indicator light * 1 flashes slowly and then rapidly . When the indicator light flashes rapidly, both buttons may be released.
2-66 Instruments and controls PROGRAMMING HomeLink FOR CANADIAN CUSTOMERS AND GA TE OPENERS Canadian radio-frequency laws require trans- mitter signals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink to pick up the signal during programming.
CLEARING THE PROGRAMME D IN- FORMA TION The following procedure clears the programmed information from both buttons. Individual buttons cannot be cleared. However, individual buttons can be reprogrammed, see “Reprogramming a single HomeLink but- ton” page 2-67.
2-68 Instruments and controls MEMO I n f o r m a t i o n P r o v i d e d b y :.
3 Pre-driving checks and adjustments Keys ............................................................................................. 3-2 Intelligent Key ...................................................................... 3-2 Doors ..............
3-2 Pre-driving checks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a G T -R certified NISSAN dealer for duplicates by using the key number.
function properly. — Do not change or modify the Intelligent Key. — Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set, personal computer or cellular phone.
3-4 Pre-driving checks and adjustments WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle.
LOCKING WITH INSIDE LOCK KNOB T o lock a door individually, push down the inside lock knob to the lock position * 1 then close the door. T o unlock, lift up the inside lock knob to the unlock position * 2 . NOTE: When locking the door without an Intelli- gent Key, be sure not to leave the Intelli- gent Key inside the vehicle.
3-6 Pre-driving checks and adjustments The automatic unlock function can be deactivated or activated. T o deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position.
3. T urning the door key cylinder to the front of the vehicle * 1 will lock the driver’s door, and turning to the rear of the vehicle * 2 will unlock the driver’s door. 4. Replace the key cylinder cap in the reverse order. NO TICE Do not drive with the cap removed.
3-8 Pre-driving checks and adjustments NO TICE Do not grasp the door pockets to open and close the doors. Doing so may damage the pockets. WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
— When any type of radio wave remote control is used nearby. — When the Intelligent Key is placed near an electric appliance such as a personal computer. — When the vehicle is parked near a parking meter. . Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years.
3-10 Pre-driving checks and adjustments . If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function. . When the Intelligent Key is within the operating range, it is possible for any- one who does not carry the Intelligent Key to push the request switch to lock/ unlock the doors.
horn mode” page 3-13) Locking doors: 1. Move the shift lever to the & P position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you. 2. Close all the doors. 3. Push the driver’s or front passenger’s door handle request switch while carrying the Intelligent Key with you.
3-12 Pre-driving checks and adjustments Opening trunk lid: 1. Push the trunk open request switch * A for more than 1 second. 2. The trunk will unlatch.
Locking doors: 1. Move the shift lever to the & P position, push the ignition switch to the OFF position, and make sure you carry the Intelligent Key with you. 2. Close all the doors. 3. Push the L OCK button * 1 on the Intelligent Key . 4. All the doors will lock.
3-14 Pre-driving checks and adjustments Hazard indicator and horn mode DOOR LOCK DOOR UNLOCK TRUNK UNLOCK Intelligent Key system (Using door handle request switch or trunk open request switch) HAZARD .
Hazard indicator mode DOOR LOCK DOOR UNLOCK TRUNK UNLOCK Intelligent Key system (Using door handle request switch or trunk open request switch) HAZARD - twice HAZARD - none HAZARD - none Remote keyles.
3-16 Pre-driving checks and adjustments WARNING SIGNALS T o help prevent the vehicle from moving unexpectedly due to an erroneous operation of the Intelligent Key listed on the following chart or to h.
TROUBLESHOOTING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds continuously . The shift lever is not in the & P position.
3-18 Pre-driving checks and adjustments OPENING THE HOOD 1. Pull the hood lock release handle * 1 located below the instrument panel. The hood will then spring up slightly. 2. Pull the lever * 2 at the front of the hood with your fingertips and raise the hood.
CAUTION . Do not insert hands, clothing, tools or other items into the engine compartment while the engine is running. . Do not touch the exhaust system parts, radiator or other hot parts until the engine and the parts have cooled. NO TICE Do not open the hood while the wiper arms are lifted away from the wind- shield.
3-20 Pre-driving checks and adjustments WARNING . Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle.
TRUNK RELEASE POWER CANCEL SWITCH When the switch located inside the glove box is in the OFF position * 1 , the power to the trunk lid will be canceled and the trunk lid cannot be opened by the trunk lid release switch, the trunk open request switch or the TRUNK button on the Intelligent Key .
3-22 Pre-driving checks and adjustments OPENING AND CLOSING THE TRUNK When opening the trunk, first unlock it then lift up the trunk lid so that it is fully open. When closing the trunk, lower the trunk lid and press it until it is securely locked in place.
The emergency trunk lid release mechanism allows opening of the trunk lid in the event that people become locked inside the trunk or in the event of the loss of electrical power such as a discharged battery. Inside the trunk T o open the trunk lid from the inside, pull the release handle * 1 until the lock releases and push up on the trunk lid.
3-24 Pre-driving checks and adjustments The fuel-filler door is located on the right and rear side of the vehicle. WARNING . Gasoline is extremely flammable and highly explosive under certain conditions. Y ou could be burned or seriously injured if it is misused or mishandled.
OPENING THE FUEL FILLER DOOR 1. Unlock the fuel-filler door by using one of the following operations. . Push the door handle request switch with the Intelligent Key carried with you. . Push the UNL OCK button on the In- telligent Key . . Push the power door lock switch to the UNL OCK position.
3-26 Pre-driving checks and adjustments . Push the power door lock switch to the L OCK position. NOTE: After a single click is heard and the cap is released it may move slightly. This is not a malfunction. WARNING . Do not adjust the steering wheel while driving.
T elescopic adjustment This adjusts the forward/backward position of the steering wheel. 1. Press lever * B down * 1 . 2. Move the steering wheel forward/backward * 2 and stop it in an appropriate position. 3. Lift up lever * B to lock the steering wheel in position * 3 .
3-28 Pre-driving checks and adjustments rearview mirror operate normally. The indicator light will turn off. Push the “I” switch * D to turn the system on. NO TICE Do not allow any object to cover the sensors * E or apply glass cleaner on them. Doing so will reduce the sensi- tivity of the sensor, resulting in impro- per operation.
Folding the outside mirrors Push the switch down * 2 to fold the outside mirrors. Push the switch up * 1 to unfold the mirrors before driving. CAUTION . Do not touch the mirrors while they are moving. Y our hand may be pinched, and the mirror may mal- function.
3-30 Pre-driving checks and adjustments MEMO I n f o r m a t i o n P r o v i d e d b y :.
4 Display screen, heater, air conditioner and audio systems Multi Function Display Owner’s Manual ............................. 4-2 4 Display screen, heater, air conditioner and audio systems Multi Function Display Owner’s Manual .................
4-2 Display screen, heater, air conditioner and audio systems Refer to the separate Multi Function Display Owner’s Manual that includes the following information. . Multi function display system . Navigation . Audio system . Bluetooth hands-free phone system .
5 Starting and driving Precautions when starting and driving ............................... 5-3 Exhaust gas (carbon monoxide) ..................................... 5-3 Three-way catalyst ............................................................. 5-3 Tire Pressure Monitoring System (TPMS) .
Brake system .......................................................................... 5-48 Braking precautions ........................................................ 5-48 Parking brake break-in ................................................... 5-48 Brake assist .
WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle.
5-4 Starting and driving WARNING . The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable materials away from the exhaust system com- ponents. . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags.
Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approxi- mately one minute and then remain continuously illuminated.
5-6 Starting and driving Nitrogen for maximum tire performance. . The Tire and Loading Information label (also referred to as the vehicle placard or tire inflation pressure label) is located in the driver’s door opening. . Y ou can also check the pressure of all tires on the multi function display.
GT -R are installed on your vehicle. . The TPMS will not function properly if non-GT-R wheels are installed on the vehicle. . Do not place metalized film or any metal parts (antenna, etc .) on the windows. This may cause poor re- ception of the signals from the tire pressure sensors, and the TPMS will not function properly.
5-8 Starting and driving 1. Remain calm and do not overreact. 2. Do not apply the brakes. 3. Maintain a firm grip on the steering wheel with both hands and try to hold a straight course. 4. When appropriate, slowly release the accel- erator pedal to gradually slow the vehicle.
DRINKING ALCOHOL /DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the blood- stream reduces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others.
5-10 Starting and driving WARNING Do not operate the push-button ignition switch while driving the vehicle except in an emergency. (The engine will stop when the ignition switch is pushed three consecutive times or the ignition switch is pushed and held for more than 2 seconds.
IGNITION SWITCH POSITIONS LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the port.
5-12 Starting and driving INTELLIGENT KEY BA TTERY DIS- CHARGE If the battery of the Intelligent Key is almost discharged, the guide light * 1 of the Intelligent Key port blinks and the indicator appears on the vehicle information display.
( “Intelligent Key battery replace- ment” page 8-27) . Make sure the area around the vehicle is clear. . Check fluid levels such as engine oil, cool- ant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel.
5-14 Starting and driving 1. Check the positions of the accelerator pedal * 1 and brake pedal * 2 . Adjust the steering wheel and seat positions so that the correct driving posture is achieved. ( “Front seats” page 1-3) 2. Check that the parking brake is engaged.
drive the vehicle even when the shift lever is moved to the & A ņ & M or & R position. If this occurs, the SHIFT & P warning appears on the vehicle infor- mation display.
5-16 Starting and driving medical devices or other electronic products that are susceptible to magnetic force close to the shift lever. . Do not downshift abruptly on slip- pery roads.
Operating the shift lever After starting the engine, fully depress the brake pedal and move the shift lever from the & P position to the & R , & N , or & A ņ & M position. Push the button to shift into the & P or & R position.
5-18 Starting and driving CAUTION . Grip the shift lever correctly when operating it. Failure to do so may cause a finger or other items to be trapped between the lever and gate, possibly causing an accident.
and maintenance. ( “Cleaning in- terior” page 7-7) Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the & P position even with the brake pedal depressed and the shift lever button pushed. T o move the shift lever, perform the following procedure.
5-20 Starting and driving Control on downhill roads: The adaptive shift control system shifts to a low gear that suits the degree of the slope, and uses the engine brake to reduce the number of times that the foot brake must be used.
. First gear: Use this position when accelerating from a stop, climbing a steep hill slowly or engine braking at low speeds. . Second gear: Use this position when accelerating or engine braking at mid-low speeds. . Third gear: Use this position when accelerating or gently engine braking at middle speeds.
5-22 Starting and driving 2. Release the parking brake. 3. Release the foot brake pedal gradually, then slowly depress the accelerator pedal to start the vehicle in motion.
WARNING . When the shift lever is in the & A position, the adaptive shift control system will stay in a low gear in order to maintain the effectiveness of the engine brake. However if the vehicle is traveling too fast depend- ing on the degree of the slope, you should shift to the & M position and use the paddle shifter to shift down.
5-24 Starting and driving when the vehicle is driven, a wheel may not roll correctly, or the brake pads could be damaged. If the pads are damaged, this may reduce the effec- tiveness of the brake system which could cause a collision, serious perso- nal injury or death.
The control of the dual clutch transmission, Bilstein Damp T ronic electronically controlled shock absorbers and Vehicle Dynamic Control (VDC) can be changed to the desired modes by operating the setup switches. Select the desired mode best suited to the driving conditions.
5-26 Starting and driving : Push and hold the switch for longer than approximately 1 second : Push the switch * The selected mode is maintained even if the shift lever is moved between & A and & M position. NO TICE . “ESC (Electronic Stability Control) OFF” indicated on the VDC setup switch stands for “VDC OFF” .
FEA TURES OF EACH MODE T ransmission The transmission mode differs depending on the shift lever position, & A or & M . & A position: Set up mode Features . In addition to the normal mode functions, this mode allows you to achieve higher engine speed, greater powertrain torque and engine braking.
5-28 Starting and driving & M position: Set up mode Features . This mode allows you to shift gears quickly and directly. . This mode will not allow the transmission to automatically upshift even when the engine speed reaches the red zone. Do not rev the engine into the red zone.
Suspension Set up mode Features . The damping force of the shock absorbers is set for maximum vehicle performance. . Riding comfort becomes harder. Normal (light is off) . The damping force of the shock absorbers is variably adjusted for everyday driving or maximum vehicle performance.
5-30 Starting and driving V ehicle Dynamic Control (VDC) Set up mode Features . In addition to the normal mode function, this mode adjusts front and rear wheel power distribution to improve handling. . With the transmission switch in R mode, the R mode start function can be used.
See your 2015 Warranty Information Booklet for important related information and warranty coverage exclusions. See also section 2 ( “T ransmission warning light” page 2-30) and section 5 ( “V eh.
5-32 Starting and driving conditions, and oil consumption by itself does not necessarily indicate any malfunction. If your rate of oil consumption increases suddenly or without explanation, NISSAN recom- mends that you have your vehicle inspected by a GT -R certified NISSAN dealer.
abled, the warning light illuminates. When the warning light illuminates, perform cool down driving. ( “Cool down” page GTR-13) When the warning light turns off, the function can be used again.
5-34 Starting and driving a vehicle. They could release the parking brake and cause an acci- dent. T o apply: Pull the parking brake lever up. T o release: 1. Firmly apply the foot brake. 2. While pulling up on the parking brake lever slightly, push the button * A and lower the lever completely.
PRECAUTIONS ON CRUISE CON- TROL . If the cruise control system malfunctions, it will cancel automatically. The SET indicator will blink and the cruise control system warning will appear to warn the driver. ( “Cruise control system warning” page 2-40) .
5-36 Starting and driving INDICA TORS AND DISPLA Y 1. CRUISE display Displays the set vehicle speed. 2. CRUISE indicator Informs the driver that the MAIN switch is ON.
Passing another vehicle T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. Increasing the set vehicle speed T o reset at a faster cruising speed, use one of the following methods: .
5-38 Starting and driving NOTE: . If cruise control was canceled by press- ing the cancel switch or by depressing the brake pedal, the system changes to standby status. . If you depress the brake pedal while pushing the RESUME/ACCELERA TE or SET/COAST switch and reset at the cruising speed, the cruise control will be deactivated.
hill start assist will stop operating completely. Hill start assist will not operate when the shift lever is moved to the & N or & P position or on a flat and level road. NOTE: This system does not function when the V ehicle Dynamic Control VDC) system warning appears on the vehicle informa- tion display located in the tachometer.
5-40 Starting and driving certified NISSAN dealer in accordance with specifications for city driving to high perfor- mance driving. The tires on the G T -R may have different wear rates and wear patterns in comparison to conventional passenger vehicles.
7. Avoid idling. . Shutting off your engine when safe for stops exceeding 30-60 seconds saves fuel and reduces emissions. 8. Buy an automated pass for toll roads. . Automated passes permit drivers to use special lanes to maintain cruising speed through the toll and avoid stopping and starting.
5-42 Starting and driving If any malfunction occurs in the A WD system while the engine is running, the warning light will come on. The warning light may blink rapidly (about twice per second) while trying to free a stuck vehicle due to high AWD clutch temperature.
TIGHT CORNER BRAKING PHE- NOMENON If the steering wheel is turned more than half a turn when the vehicle is started when it is cold, it may be harder to move the vehicle forward and backward. This phenomenon is known as the “tight corner braking phenomenon”.
5-44 Starting and driving mately 4 seconds again. The driving mode will switch to the normal AWD mode. Reduction of the tight corner braking phenom- enon will be cancelled when: .
The rear final drive of this vehicle is equipped with a 1.5-way mechanical Limited Slip Differ- ential (LSD) . WARNING Sudden operation of the accelerator pedal can result in fishtailing or side- slip, possibly causing an accident. Use particular caution when driving in rainy weather or on slippery roads.
5-46 Starting and driving WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle.
. HEADED UPHILL WITH CURB: * 2 T urn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb. . HEADED UPHILL OR DOWNHILL, NO CURB: * 3 T urn the wheels toward the side of the road so the vehicle will move away from the center of the road if it moves.
5-48 Starting and driving BRAKING PRECAUTI ONS The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly.
ANTI-LOCK BRAKIN G SY STEM (ABS) WARNING . The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces.
5-50 Starting and driving The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving con- ditions, the VDC system helps to perform the following functions.
shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN approved or are extremely deteriorated, the VDC system may not operate prop- erly. This could adversely affect vehicle handling performance, and the VDC warning light may illuminate.
5-52 Starting and driving See your 2015 Warranty Information Booklet for important related information and warranty coverage exclusions. See also section 2 ( “T ransmission warning light” page 2-3.
TIRE EQUIPMENT The G T -R summer tires are made from a specially formulated rubber to maximize the vehicle’s performance capabilities. Performance of summer tires is substantially reduced when temperatures are less than 32 8 F (0 8 C) so you must drive carefully.
5-54 Starting and driving ENGINE BLOCK HEA TER (if so equipped) Engine block heaters are used to assist with cold temperature starting. The engine block heater should be used when the outside temperature is 20 8 F( í 7 8 C) or lower. T o use the engine block heater 1.
This system uses the front and rear microphones * 1 to detect engine booming noise. The system then automatically generates a noise cancelling sound through the speakers * 2 and woofer * 3 to reduce engine booming noise. The front and rear microphones * 1 are located inside of the roof.
5-56 Starting and driving MEMO I n f o r m a t i o n P r o v i d e d b y :.
6 In case of emergency Hazard warning flasher switch ............................................. 6-2 Roadside assistance program .............................................. 6-2 Emergency engine shut off ...........................................
6-2 In case of emergency Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. The flasher can be actuated with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.
T o shut off the engine in an emergency situation while driving, perform the following procedure: . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or . Push and hold the push-button ignition switch for more than 2 seconds.
6-4 In case of emergency NOTE: . Y ou can check the pressure of all four tires on the multi function display. See the separate Multi Function Display Owner’s Manual. . The tires of this vehicle are filled with nitrogen gas. When the tire pressure is low, fill the tires with nitrogen.
6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle. For the tire removing procedure, see the following section. ( “Jacking vehicle and removing wheels” page 8-43) The following circumstances indicate that the battery is discharged.
6-6 In case of emergency remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. . Do not attempt to jump start a frozen battery. It could explode and cause serious injury. . Y our vehicle has an automatic en- gine cooling fan.
electrical systems (light, heater, air condi- tioner, etc.) . 3. Remove the battery cover. Cover the battery with a firmly wrung out moist cloth to reduce explosion hazard. 4. Connect jumper cables in the sequence as illustrated ( * 1 ? * 2 ? * 3 ? * 4 ).
6-8 In case of emergency WARNING . Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire. . T o avoid the danger of being scalded, never remove the radiator filler cap and the coolant reservoir cap while the engine is still hot.
When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from a G T -R certified NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing.
6-10 In case of emergency Front Rear VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged.
original place after use. Rear: The rear hook * 5 is designed as the recovery hook. T o remove the cover * 6 from the rear bumper, first push in the tabs * 7 until they unlatch and then pull the cover. Securely install the recovery hook * 3 to the attaching mount located on the rear bumper.
6-12 In case of emergency 3. T urn the steering wheel right and left to clear an area around the front tires. 4. Slowly rock the vehicle forward and back- ward. . Shift back and forth between the & R and & A ņ & M positions. . Apply the accelerator as little as possible to maintain the rocking motion.
7 Appearance and care Cleaning exterior ...................................................................... 7-2 Matte paint care (if so equipped) .................................. 7-2 Washing .......................................................
7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
Washing Hand wash the vehicle for best results. Park the vehicle in a cool, shaded area, out of direct sunlight. Read these procedures and gather the necessary equipment and supplies before washing the vehicle. Equipment/Supplies: . V ehicle soap specifically made for matte paint .
7-4 Appearance and care water-spotted. . Avoid using tight-napped or rough cloths, such as washing mitts. Care must be taken when removing caked-on dirt or other foreign sub- stances so the paint surface is not scratched or damaged. Rinse the vehicle thoroughly with plenty of clean water.
UNDERBOD Y In areas where road salt is used in winter, the underbody must be cleaned regularly. This will prevent dirt and salt from building up and causing the acceleration of corrosion on the underbody and suspension. Before the winter period and again in the spring, the underseal must be checked and, if necessary, re-treated.
7-6 Appearance and care OUTSIDE DOOR HANDLES After driving on a road where salt is used in winter, immediately wash and clean the outside door handles that are provided with a special coating. This will keep the beautiful finish longer. TIRE DRESSING NISSAN does not recommend the use of tire dressings.
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dam- pened in mild soap solution, then wipe clean with a dry soft cloth.
7-8 Appearance and care FLOOR MA TS WARNING T o avoid potential pedal interference that may result in a collision or injury: . NEVER place a floor mat on top of another floor mat in the driver front position. . Use only genuine NISSAN floor mats specifically designed for use in your vehicle model.
WARNING Do not allow wet seat belts to roll up in the retractor. NEVER use bleach, dye, or chemical solvents to clean the seat belts, since these materials may se- verely weaken the seat belt webbing. Cleaning the power window finisher Moisten a soft cloth with neutral detergent and wipe off the dirt on the power window finisher * 1 .
7-10 Appearance and care T emperature A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process.
8 Maintenance and do-it-yourself Maintenance requirement ....................................................... 8-3 Scheduled maintenance ................................................... 8-3 General maintenance ....................................
Tire labeling ...................................................................... 8-37 T ypes of tires .................................................................... 8-38 Tire chains ...........................................................
Some day-to-day and regular maintenance is essential to maintain your vehicle good mechan- ical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
8-4 Maintenance and do-it-yourself During the normal day-to-day operation of the vehicle, general maintenance should be per- formed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smell, be sure to check for the cause or have a G T -R certified NISSAN dealer do it promptly.
Inside the vehicle The maintenance items listed here should be checked on a regular basis, such as when performing scheduled maintenance, cleaning the vehicle, etc. Accelerator pedal: Check the pedal for smooth operation and make sure the pedal does not catch or require uneven effort.
8-6 Maintenance and do-it-yourself engine. W ait at least 5 minutes for the oil to drain back into the oil pan before checking the oil. Exhaust system: Make sure there are no loose supports, cracks or holes.
. If you must run the engine in an enclosed space such as a garage, be sure there is proper ventilation for exhaust gases to escape. . Never get under the vehicle while it is supported only by a jack. If it is necessary to work under the vehicle, support it with safety stands.
8-8 Maintenance and do-it-yourself 1. Fuse/fusible link holder 2. Battery 3. Engine oil filler cap 4. Engine oil dipstick 5. Brake fluid reservoir 6. Air cleaner 7. Power steering fluid reservoir 8. Radiator filler cap 9. Coolant reservoir cap (pressure type) 10.
REMOVING THE COWL T OP COVER Remove the cowl top cover if necessary. 1. Remove the battery cover. 2. Unfasten the 5 clips and remove the cowl top cover * A by pulling it up. 3. Unfasten the 3 clips and remove the cowl top cover * B by pulling it towards the front of the vehicle.
8-10 Maintenance and do-it-yourself The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors.
Except for NISMO models NISMO models * 1 : MAX line * 2 : MIN line * 3 : Between MAX and MIN lines (except for NISMO models) CHECKING ENGINE COOLAN T LE- VEL Check the coolant level in the reservoir when the engine is cold .
8-12 Maintenance and do-it-yourself This vehicle contains Genuine NISSAN Long Life Antifreeze/Coolant (blue) . The life expec- tancy of the factory-fill coolant is 24,000 miles (38,400 km) or 2 years. Mixing any other type of coolant or the use of non-distilled water will reduce the life expectancy of the factory-fill coolant.
CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. T urn off the engine. Wait at least 5 minutes for the oil to drain back into the oil pan before checking the oil.
8-14 Maintenance and do-it-yourself CHANGING ENGINE OIL AND FIL TER NOTE: When replacement is required, contact a GT -R certified NISSAN dealer for servicing. WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. . T ry to avoid direct skin contact with used oil.
NOTE: For maximum steering system perfor- mance, adjust the fluid level at the line * 5 at the hot fluid temperature or * 6 at the cold fluid temperature. Contact a GT-R certified NISSAN dealer when precise fluid level adjustment is required. NO TICE .
8-16 Maintenance and do-it-yourself Check the fluid level in the reservoir. If the fluid is below the MIN line * 1 or the brake warning light comes on, add Genuine NISSAN Brake Fluid R35 Special II fluid up to the MAX line * 2 . If fluid must be added frequently, the system should be checked by a G T-R certified NISSAN dealer.
window washer reservoir to mix the washer fluid concentrate and water. . Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water.
8-18 Maintenance and do-it-yourself 3. Connect the negative ( í ) battery terminal. Then close the hood. 4. Fully open the driver side door window. 5. Close the driver side door and the window. FLUID LEVEL CHECK WARNING . Do not expose the battery to flames or electrical sparks.
1. Remove the cell plugs * A . 2. Add distilled water up to the UPPER LEVEL * 1 line. If the side of the battery is not clear, check the distilled water level by looking directly above the cell; the condition * 1 indicates OK and the conditions * 2 needs more to be added.
8-20 Maintenance and do-it-yourself the belt is in poor condition or loose, have it replaced or adjusted by a GT -R certified NISSAN dealer. 2. Have the belts checked regularly for condi- tion and tension in accordance with the maintenance schedule in your NISSAN Service and Maintenance Guide.
Remove the retainers * 1 as illustrated and pull out the filter element * 2 . The filter element should not be cleaned and reused. Replace it according to the maintenance intervals. See NISSAN Service and Mainte- nance Guide for maintenance intervals.
8-22 Maintenance and do-it-yourself CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
Be careful not to clog the washer nozzle * A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin * B . Be careful not to damage the nozzle. If the brakes do not operate properly, have the brakes checked by a G T -R certified NISSAN dealer.
8-24 Maintenance and do-it-yourself dry road, especially after washing the vehicle or driving in rain. Contact a GT -R certified NISSAN dealer if the noise and vibration continue. Frequent hard braking may cause scorching of the brake pads. This will require the brake pads to be replaced, even if the wear limit has not been reached.
2. Open the engine hood and remove the cover on the battery and the fuse/fusible link holder. 3. Remove the fuse/fusible link holder cover. 4. Remove the fuse with the fuse puller that is located in the engine compartment fuse box. 5. If the fuse is open * A , replace it with a new fuses * B .
8-26 Maintenance and do-it-yourself 2. Open the fuse box lid. 3. Remove the fuse with the fuse puller * A . 4. If the fuse is open, replace it with a new fuse. 5. If a new fuse also opens, have the electrical system checked and repaired by a G T -R certified NISSAN dealer.
How to remove the extended storage fuse switch: 1. T o remove the extended storage fuse switch, be sure the ignition switch is in the OFF or L OCK position. 2. Be sure the headlight switch is in the OFF position. 3. Remove the fuse box cover. 4. Pinch the locking tabs * 1 found on each side of the extended storage fuse switch.
8-28 Maintenance and do-it-yourself 3. Remove the old battery and insert a new battery with the + side facing down. NO TICE . Be sure that the + and í sides of the battery are facing in the correct directions when the battery is in- serted. . Do not touch the internal circuits or electronic terminals.
1. Headlight (High beam) 2. Front parking light 3. Front turn signal light 4. Daytime running light 5. Headlight (Low beam) 6. Front side marker light 7. High-mounted stop light 8. License plate light 9. Rear combination light (rear turn signal/tail/stop/ back-up) 10.
8-30 Maintenance and do-it-yourself HEADLIGHTS Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This does not indicate that there is a malfunction.
Always check with the Parts Department at a G T -R certified NISSAN dealer for the latest parts information. Replacement procedures All other lights are either type A , B, C, D, E or F.
8-32 Maintenance and do-it-yourself If you have a flat tire, see the following section. ( “Flat tire” page 6-3) CAUTION A GT-R certified NISSAN dealer should perform a tire change. It will be neces- sary to reset the tire pressure sensors. T o change the tires, contact a GT-R certified NISSAN dealer.
. If nitrogen is not available, compressed air may be safely used under normal driving conditions. However, NISSAN recommends refilling with nitrogen for maximum tire performance.
8-34 Maintenance and do-it-yourself rigid side wall. Special techniques and equipment are therefore required when replacing these tires. NISSAN recom- mends that tire replacement be per- formed at a GT -R certified NISSAN dealer.
TIRE AND LOADING INFORMA TION LABEL * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See the following section. ( “V ehicle loading infor- mation” page 9-14) * 3 Original size: The size of the tires originally installed on the vehicle at the factory .
8-36 Maintenance and do-it-yourself CHECKING THE TIRE PRESSURE 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem.
Example TIRE LABELING Federal law requires tire manufacturers to place standardized information on the side- wall of all tires. This information identifies and describes the fundamental character- istics of the tire and also provides the tire identification number (TIN) for safety stan- dard certification.
8-38 Maintenance and do-it-yourself Example * 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Department of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number.
.
8-40 Maintenance and do-it-yourself warning appears on the vehicle information display: . Do not exceed 50 MPH (80 km/h) . . Increase your following distance to allow for increased stopping distances. . Avoid sudden maneuvers, hard cornering and hard braking.
NOTE: Tire chains must be installed only on the rear wheels and not on the front wheels. CAUTION Do not use tire chains on dry roads. NO TICE Never install tire chains on a punctured run-flat tire, as this could damage your vehicle. Do not drive with tire chains on paved roads that are clear of snow.
8-42 Maintenance and do-it-yourself wear indicators are visible, the tire(s) should be replaced. . Tires degrade with age and use. Have tires, over 6 years old checked by a qualified techni- cian because some tire damage may not be obvious. Replace the tires as necessary to prevent tire failure and possible personal injury.
which have the same off-set dimen- sion. Wheels of a different off-set could cause premature tire wear, degrade vehicle handling character- istic s, affect the VDC system and/or cause interference with the brake disc s. Such interference can lead to decreased braking efficiency and/or early brake pad wear.
8-44 Maintenance and do-it-yourself Blocking wheels Place suitable blocks * 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury.
limited slip differentials. . Do not allow passengers to stay in the vehicle while it is on the jack. Carefully read the caution label attached to the jack body and the following instruc- tions. Jack-up point 1. Place the jack directly under the jack-up point as illustrated so the top of the jack contacts the vehicle at the jack -up point.
8-46 Maintenance and do-it-yourself 2. Fit the jack head into the recess * A of the jack -up point by turning the jackscrew clockwise with your fingers. 3. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground.
5. Remove the wheel nuts and then remove the wheel. NOTE: When putting a wheel on the ground, put it down with the outer side of the wheel facing up to prevent scratching of the wheel surface. 6. Clean any mud or dirt from the surface between the brake disc rotor * 1 and wheel * 2 .
8-48 Maintenance and do-it-yourself 8. With the wheel nut wrench, tighten wheel nuts alternately and evenly in the sequence as illustrated ( * 1 , * 2 , * 3 , * 4 , * 5 ) until they are tight. 9. Lower the vehicle slowly until the tire touches the ground.
MEMO Maintenance and do-it-yourself 8-49 I n f o r m a t i o n P r o v i d e d b y :.
8-50 Maintenance and do-it-yourself MEMO I n f o r m a t i o n P r o v i d e d b y :.
9 T echnical and consumer information Capacities and recommended fluids/lubricants ............... 9-2 Fuel information .................................................................. 9-4 Engine oil and oil filter recommendation ...................
9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.
Brake fluid Refill to the proper oil level according to the instructions in the “8. Maintenance and do-it-yourself” section. . Genuine NISSAN Brake Fluid R35 Special II .
9-4 T echnical and consumer information FUEL INFORMATION VR38 engine Use unleaded premium gasoline with an octane rating of at least 93 AKI (Anti-Knock Index) number (Research octane number 98) to max- imize vehicle performance.
fuels may cause vehicle performance problems and/or fuel system damage. . The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. . If an oxygenate-blend, excepting a methanol blend, is used, it should contain no more than 10% oxygenate.
9-6 T echnical and consumer information Octane rating tips Using unleaded gasoline with an octane rating lower than recommended above can cause persistent, heavy spark knock. (Spark knock is a metallic rapping noise.) If severe, this can lead to engine damage.
life. Damage to engines caused by improper maintenance or use of incorrect oil and filter quality and/or viscosity is not covered by the NISSAN new vehicle limited warranties. Y our engine was filled with a high quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
9-8 T echnical and consumer information ENGINE Model VR38 T ype Gasoline, 4-cycle Cylinder arrangement 6-cylinder, V-slanted at 60 8 Bore 6 Stroke in (mm) 3.760 6 3.480 (95.5 6 88.4) Displacement cu in (cm 3 ) 231.83 (3,799) Firing order 1-2-3-4-5-6 Idle speed rpm No adjustment is necessary.
WHEELS AND TIRES Tire T ype Size Pressure PSI (kPa) [Cold] Summer Front: 255/40ZRF20 (97Y) 30 (210) Rear: 285/35ZRF20 (100Y) 29 (200) All-season Front: 255/40RF20 97W 32 (220) Rear: 285/35RF20 100W 30 (210) Make sure to use the tires for G T -R. See the 2015 Warranty Information Booklet for the applicable exclusions.
9-10 T echnical and consumer information Road wheel T ype Size Offset in (mm) Aluminum Front: 20 6 9-1/2J*1 20 6 10J*2 1.77 (45)*1 1.61 (41)*2 Rear: 20 6 10-1/2J 0.98 (25) *1: Except for NISMO models *2: NISMO models Make sure to use the road wheels for G T -R.
If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
9-12 T echnical and consumer information ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M .V.S.S./C.M .V.S.S. CERTIFICA- TION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F.M.V .S.S./C.M.V.S.S.) certification label is affixed as shown.
TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the door end as illustrated. AIR CONDITIONE R SPECIFICATION LABEL The air conditioner specification label is at- tached as shown. Make sure that the two POP nuts as illustrated are enclosed in the plastic bag.
9-14 T echnical and consumer information WARNING . It is extremely dangerous to ride in a cargo area inside the vehi- cle. In a collision, people riding in these areas are more likely to be seriously injured or killed. . Do not allow people to ride in any area of vehicle that is not equipped with seats and seat belts.
VEHICLE LOAD CAPACITY Do not exceed the load limit of your vehicle shown as “The combined weight of occu- pants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Informa- tion label.
9-16 T echnical and consumer information Also check tires for proper inflation pres- sures. See the Tire and Loading Information label. LOADING TIPS . The GVW must not exceed GVWR or GA WR as specified on the F .M.V.S.S./ C.M.V .S.S. certification label.
Do not tow a trailer with your vehicle. T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. DO NO T tow the G T -R with all four wheels on the ground (flat towing) .
9-18 T echnical and consumer information TRACTION A A , A , B AND C The traction grades, from highest to lowest, are AA , A , B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on spe- cified government test surfaces of asphalt and concrete.
For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying NISSAN.
9-20 T echnical and consumer information A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing) , or similar equipment.
EDR data with the type of personally identifying data routinely acquired during a crash investiga- tion. T o read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed.
9-22 T echnical and consumer information Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory-trained technicians working at NISSAN dealerships.
10 Index A Active noise control.................................................... 5-54 Additional maintenance items............................ GTR-12 Air cleaner..................................................................... 8-21 Air conditioner Air conditioner specification label .
10-2 Cruise control system warning................................ 2-40 Cup holders.................................................................. 2-56 Current fuel consumption ......................................... 2-15 D Differential oil .....
Front seat-mounted side-impact supplemental air bag and roof-mounted curtain side-impact supplemental air bag systems ................................. 1-45 Front seats...................................................... ................ 1-3 Front/rear tire size discrepancy warning.
10-4 Intelligent Key battery discharge...................... 5-12 Intelligent Key battery discharge indicator ..... 2-45 Intelligent Key battery replacement ................. 8-27 Intelligent Key functions ....................................... .. 3-9 Intelligent Key insertion indicator .
T ransmission oil high temperature warning .... 2-36 Opening and closing the trunk................................ 3-22 Opening the doors ....................................................... 3-7 Opening the fuel filler door ........................
10-6 Front seat-mounted side-impact supplemental air bag and roof-mounted curtain side-impact supplemental air bag systems .......................... 1-45 Front seats...................................................... .......... 1-3 Heated seats...
Tire and loading information label ......... 8-35, 9-13 Tire chains .............................................................. 8-40 Tire dressing............................................................. 7-6 Tire equipment .....................
10-8 Low brake fluid warning ..................................... 2-37 Low fuel warning.................................................. 2-40 Low tire pressure warning ................................. 2-39 Low washer fluid warning..................
Een belangrijk punt na aankoop van elk apparaat Nissan GTR (2015) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan GTR (2015) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan GTR (2015) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan GTR (2015) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan GTR (2015) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan GTR (2015) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan GTR (2015) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan GTR (2015) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
