Gebruiksaanwijzing /service van het product Juke (2014) van de fabrikant Nissan
Ga naar pagina of 356
® 2014 JUK E OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2014 N I SSAN J U K E F15-D F15-D Printing : November 2013 (23) Publication No.
Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure.
.
MODIFICA TION OF Y OUR VEHI- CLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems result- ing from modification may not be covered under NISSAN warranties.
above call attention to an item in the illustration. CALIFORNIA PROPOSIT ION 65 W ARNING WARNING Engine exhaust, some of its constitu- ents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
.
Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving checks and adjustments Heater, air conditioner, audio and phone sy.
.
0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ............................................................................ 0-2 Exterior front .................................................................
0-2 Illustrated table of contents JVC0533X 1. Rear head restraints (Page 1-5) 2. Child restraint anchor points (for top tether strap child restraint) (P .1-32) 3. Front head restraints (P .1-5) — Front-seat Active Head Restraints (P .1-9) 4. Roof-mounted curtain side-impact supplemental air bags (P .
SSI0766 1. Hood (P .3-19) 2. Windshield wiper and washer — Switch operation (P .2-32) — Blade replacement (P .8-17) — Window washer fluid (P .8-12) 3. Parking lights, turn signal lights and front side marker lights — Switch operation (P .2-35) — Bulb replacement (P .
0-4 Illustrated table of contents JVC0534X 1. Lift gate (P .3-20) — Intelligent Key system* (P .3-10) 2. Rear window wiper and washer — Switch operation (P .2-34) — Window washer fluid (P .8-12) 3. Rear spoiler* (P .7-3) 4. High-mounted stop light (P .
JVC0413X For NISMO models, the vehicle parts listed below require special care or caution for cleaning. Refer to the additional information in each section. 1. Front bumper (P .3-20, P .6-14) 2. Daytime running light (P .2-37, P .3-20, P .8-26, P .8-28) 3.
0-6 Illustrated table of contents JVC0184X 1. Cargo area — Cargo cover* (P .2-44) — Cargo light (P .2-51, P .8-26) 2. Coat hook (P .2-44) 3. Sun visors (P .3-24) 4. Microphone (P .4-50) 5. Moonroof switch* (P .2-48) 6. Room light and map lights (P .
JVC0572X 1. Outside mirror remote control switch (P .3-25) 2. Headlight, fog light and turn signal switch — Headlight (P .2-35) — Turn signal light (P .2-38) — Fog light* (P .2-39) 3. Paddle shifter* (P .5-20) 4. Steering wheel — Electric power steering system (P .
0-8 Illustrated table of contents JVC0607X 1. Meters and gauges (P .2-5) 2. Center ventilator (P .4-12) 3. Audio system* or Navigation system** (P .4-21) — Clock* (P .2-41) 4. Hazard warning flasher switch (P .6-2) 5. Integrated Control System* (P .
SIC4601 1. T achometer (P .2-8) 2. Engine coolant temperature gauge (P.2-8) 3. V ehicle information display (P .2-9) — Odometer/twin trip odometer (P .2-6) — Trip computer (P .2-10) — Torque vectoring AWD (AWD model) (P .2-11) — Outside air temperature (P .
0-10 Illustrated table of contents SDI2639 MR16DDT ENGINE 1. Engine oil filler cap (P .8-8) 2. Radiator filler cap (P .8-8) — Vehicle overheat (P .6-10) 3. Brake and clutch* fluid reservoir (P .8-11) 4. Air cleaner (P .8-16) 5. Window washer fluid reservoir (P .
Warning light Name Page All-Wheel Drive (AWD) warning light (yellow) (A WD model) 2-13 Anti-lock Braking System (ABS) warning light 2-13 Brake warning light 2-13 Charge warning light 2-14 Door open wa.
0-12 Illustrated table of contents MEMO.
1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats .......................................................................
1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries.
SSS0792 T ype A JVR0342X T ype B FRONT SEA TS Front manual seat adjustment Forward and backward: Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining (T ype A) : T o recline the seatback, pull the lever * 2 up and lean back.
1-4 Safety — Seats, seat belts and supplemental restraint system seatback in position. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. (See “Precautions on seat belt usage” (P .
CAUTION When folding or returning the seatback(s) to the upright position, to avoid injury to yourself and others: . Make sure that the seat path is clear before moving the seat. WARNING . Do not fold down the rear seats when occupants are in the rear seat area or any objects are on the rear seats.
1-6 Safety — Seats, seat belts and supplemental restraint system JVR0051X The illustration shows the seating positions equipped with head restraint/headrest. Indicates the seating position is equipped with a head restraint. Indicates the seating position is equipped with a headrest.
JVR0203X NON-ADJUST ABLE HEAD RE- STRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks SSS1037 REMOVE Use the following procedure to remove the head restraint/headrest. 1. Pull the head restraint/headrest up to the highest position.
1-8 Safety — Seats, seat belts and supplemental restraint system SSS0997 ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
SSS1036 Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position.
1-10 Safety — Seats, seat belts and supplemental restraint system PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
SSS0016 SSS0014 WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint. . The seat belt should be properly adjusted to a snug fit.
1-12 Safety — Seats, seat belts and supplemental restraint system . Once a seat belt pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See a NISSAN dealer. . Removal and installation of the pretensioner system components should be done by a NISSAN dealer.
Fastening the seat belts 1. Adjust the seat. (See “Seats” (P .1-2) .) SSS0292 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. . The retractor is designed to lock during a sudden stop or on impact.
1-14 Safety — Seats, seat belts and supplemental restraint system of movement in the seat. The ELR locks the seat belt when the vehicle slows down rapidly or during certain impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation.
belt may vary depending on the model. WARNING . After adjustment, release the ad- justment button and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. . The shoulder belt anchor height should be adjusted to the position best for you.
1-16 Safety — Seats, seat belts and supplemental restraint system . If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly.
“Child restraints” (P .1-18) . A child restraint may be secured in the vehicle by using either the LA T CH (Lower Anchors and T ethers for CHildren) system or with the vehicle seat belt. See “Child restraints” (P .1-18) for more information. NISSAN recommends that all pre-teens and children be restrained in the rear seat.
1-18 Safety — Seats, seat belts and supplemental restraint system SSS0099 SSS0100 PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- s.
— Keep seatbacks as upright as possible after fitting the child restraint. — Infants and children should al- ways be placed in an appropri- ate child restraint while in the vehicle. . When the child restraint is not in use, keep it secured with the LAT CH system or a seat belt.
1-20 Safety — Seats, seat belts and supplemental restraint system SSS0801 LA T CH label location Lower Anchors and T ethers for CHildren System (LA T CH) Y our vehicle is equipped with special anchor points that are used with LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints.
SSS0637 LA T CH lower anchor location LA T CH lower anchor location The LA T CH anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH anchors.
1-22 Safety — Seats, seat belts and supplemental restraint system may damage the top tether strap during a collision. Y our child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged. . Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor.
SSS0648 Rear-facing web-mounted — step 2 2. Secure the child restraint anchor attach- ments to the LA TCH lower anchors. Check to make sure the LA T CH attachment is properly attached to the lower anchors. SSS0649 Rear-facing rigid-mounted — step 2 SSS0639 Rear-facing — step 3 3.
1-24 Safety — Seats, seat belts and supplemental restraint system SSS0650 Rear-facing — step 4 4. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LA TCH attachment path.
ger air bag and status light” (P .1-43) . SSS0100 Rear-facing — step 1 Refer to all Warnings and Cautions in the “Child safety” (P .1-16) and “Child restraints” (P .1-18) before installing a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1.
1-26 Safety — Seats, seat belts and supplemental restraint system SSS0655 Rear-facing — step 3 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) .
SSS0658 Rear-facing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side.
1-28 Safety — Seats, seat belts and supplemental restraint system SSS0646 Forward-facing rigid-mounted — step 2 3. The back of the child restraint should be secured against the vehicle seatback. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit.
child restraint is loose, repeat steps 1 through 6. FORW ARD-F ACING CHILD RE- STRAINT INST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured.
1-30 Safety — Seats, seat belts and supplemental restraint system SSS0360B Forward-facing — step 3 3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.
SSS0653 Forward-facing — step 6 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
1-32 Safety — Seats, seat belts and supplemental restraint system SSS1135 Forward-facing — step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate.
BOOSTER SEA TS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: . Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach.
1-34 Safety — Seats, seat belts and supplemental restraint system LRS0464 All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated.
LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint to obtain the correct booster seat fit. If the head restraint is removed, store it in a secure place.
1-36 Safety — Seats, seat belts and supplemental restraint system PRECAUTIONS ON SUPPLEMENT AL RESTRAINT SY STEM This Supplemental Restraint System (SRS) section contains important information concern- ing the following systems: . Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) .
SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower se- verity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
1-38 Safety — Seats, seat belts and supplemental restraint system back against the seatback and as far-away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened.
SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations.
1-40 Safety — Seats, seat belts and supplemental restraint system SSS0059A Do not lean against doors or windows. SSS0188A SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact sup- plemental air bags and roof-mounted curtain side-impact supplemental air bags: .
. The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the side roof rails.
1-42 Safety — Seats, seat belts and supplemental restraint system NISSAN ADVANCED AIR BAG SY S- TEM (front seats) WARNING T o ensure proper operation of the passenger’s advanced air bag system, please observe the following items. . Do not allow a passenger in the rear seat to push or pull on the seatback pocket.
a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. Front air bags, along with the use of seat belts, help to cushion the impact force on the head and chest of the front occupants.
1-44 Safety — Seats, seat belts and supplemental restraint system below as permitted by U.S. regulations. If the front passenger air bag is OFF , it will not inflate in a crash. The driver air bag and other air bags in your vehicle are not part of this system.
OFF) . Y our NISSAN dealer can check that the system is OFF by using a special tool. However, until you have confirmed with your dealer that your air bag is working properly, reposition the occupant or child restraint in a rear seat.
1-46 Safety — Seats, seat belts and supplemental restraint system jects under the front passenger seat or the seat cushion and seatback. Such objects may interfere with the proper operation of the occupant classification sensors. . No unauthorized changes should be made to any components or wiring of the seat belt system.
to inflate on the side where the vehicle is impacted. They may not inflate in certain side collisions on the side where the vehicle is impacted. V ehicle damage (or lack of it) is not always an indication of proper side air bag and curtain air bag operation.
1-48 Safety — Seats, seat belts and supplemental restraint system stallation of electrical equipment should also be done by a NISSAN dealer. The Supplemental Restraint System (SRS) wiring harnesses* should not be modified or discon- nected.
in this Owner’s Manual. SSS1020 SUPPLEMENT AL AIR BAG W ARNING LABELS Warning labels about the supplemental front- impact air bag system are placed in the vehicle as shown in the illustration. * 1 SRS air bag The warning labels are located on the surface of the sun visors.
1-50 Safety — Seats, seat belts and supplemental restraint system . The supplemental air bag warning light remains on after approximately 7 seconds. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all.
2 Instruments and controls Cockpit ........................................................................................ 2-3 Instrument panel ........................................................................ 2-4 Meters and gauges ...........
Map light control switch (if so equipped) ................. 2-50 Cargo light ......................................................................... 2-51.
JVC0572X 1. Outside mirror remote control switch 2. Headlight, fog light and turn signal switch — Headlight — Turn signal light — Fog light* 3. Paddle shifter* 4. Steering wheel — Electric power steering system — Horn — Driver’s supplemental air bag 5.
2-4 Instruments and controls JVC0607X 1. Meters and gauges 2. Center ventilator 3. Audio system* or Navigation system** — Clock* 4. Hazard warning flasher switch 5. Integrated Control System* — Drive mode — Heater and air conditioner control — Defroster switch 5.
SIC4601 1. T achometer 2. Engine coolant temperature gauge 3. V ehicle information display — Odometer/twin trip odometer — Trip computer — Torque vectoring AWD (AWD model) — Outside air temperature 4. Fuel gauge 5. Speedometer 6. Warning/indicator lights 7.
2-6 Instruments and controls SIC4504 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h) . SIC4571 Odometer/twin trip odometer Odometer/twin trip odometer The odometer * 1 /twin trip odometer * 2 are displayed when the ignition switch is in the ON position.
SP A2809 Loose fuel cap warning message Push the reset switch * A for more than 1 second to reset the L OOSE FUEL CAP warning message after the fuel cap has been tightened. For additional information see “Fuel-filler cap” (P .3-21) of this manual.
2-8 Instruments and controls SIC4506 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM) . Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed.
SIC4124 FUEL GAUGE The gauge * 1 indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. Refill the fuel tank before the gauge registers 0 (empty) . The low fuel warning light illuminates when the amount of fuel in the tank is getting low .
2-10 Instruments and controls OUTSIDE AIR TEMPERA TURE The outside air temperature is displayed in 8 Fo r 8 C. When the outside air temperature becomes 37 8 F( 3 8 C) or lower, the outside air temperature display blinks to give a warning.
Average fuel consumption (mpg or l (liter)/100 km) The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the trip computer mode switch * A for approximately 1 second. The display is updated every 30 seconds.
2-12 Instruments and controls All-Wheel Drive (AWD) warning light (AWD model)* Low fuel warning light Cruise indicator light Anti-lock Braking System (ABS) warning light Low tire pressure warning ligh.
CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: , or , , , , , The follow.
2-14 Instruments and controls . Pressing the brake pedal with the engine stopped and/or low brake fluid level may increase your stop- ping distance and braking will re- quire greater pedal effort as well as pedal travel.
This light illuminates or blinks as follows: . The light blinks in yellow when the door is closed with the Intelligent Key left outside the vehicle and the ignition switch in the ACC or ON position. Make sure that the Intelligent Key is inside the vehicle.
2-16 Instruments and controls WARNING . If the light does not illuminate with the ignition switch placed in the ON position, have the vehicle checked by a NISSAN dealer as soon as possible.
occupied. For about 5 seconds after the ignition switch is in the ON position, the system does not activate the warning light for the front passenger. See “Seat belts” (P .
2-18 Instruments and controls Cruise indicator light Cruise main switch indicator: This light illuminates when the cruise control main switch is pushed. The light turns off when the main switch is pushed again. When the cruise indicator light illuminates, the cruise control system is operational.
warning message is displayed on the twin trip odometer. If the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The light should turn off after a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer.
2-20 Instruments and controls Light reminder chime The light reminder chime will sound when the driver side door is opened with the light switch in the AUT O (if so equipped) , or position, and the ignition switch is in the ACC, OFF or LOCK position. T urn the light switch off when you leave the vehicle.
The Integrated Control System is located below the audio system or navigation system (if so equipped) . T wo Integrated Control System modes can be selected: Drive mode and Climate Control mode.
2-22 Instruments and controls SETUP FUNCTION . Display Brightness . Button Brightness . Clock Time Setting . Select Language . Select Units . Auto Interior Illumination . Selective Door unlock . Auto Headlight Sensitivity (if so equipped) . CLIMA TE ECO NOTE: .
Clock Time Setting NOTE: Clock Time Setting is used for displaying the ECO information. See “Eco informa- tion” (P.2-28) . SIC4558 1. Press the Drive Mode Select button. 2. Press the SETUP button. 3. T urn the Selection dial to “Clock Time Setting”, then press the ENTER button.
2-24 Instruments and controls SIC4560 Select Language 1. Press the Drive Mode Select button. 2. Press the SETUP button. 3. T urn the Selection dial to “Select Lan- guage”, then press the ENTER button. SIC4561 4. T urn the Selection dial to select the pre- ferred language, then press the ENTER button to apply the selection.
SIC4581 4. T urn the Selection dial to select “US” or “METRIC”, then press the ENTER button to apply the selection. SIC4605 Auto Interior Illumination Select to turn the illumination of the interior lights on or off when any door is unlocked. 1.
2-26 Instruments and controls 4. T urn the Selection dial to select “ON” or “OFF”, then press the ENTER button to apply the selection. The indicator will turn red when selective door unlock is on. SIC4607 Auto Headlight Sensitivity (if so equipped) Select to adjust the sensitivity of the automatic headlight.
JVI0324X DRIVE INFORMA TION While in the Drive mode, push the Drive information button to display elapsed time, average speed and trip distance. Pressing the Drive information button a second time will display the G (gravity) -Force screen. Elapsed time The elapsed time shows the time since the last reset.
2-28 Instruments and controls ECO INFORMA TION CAUTION Do not adjust the display controls while driving so that full attention may given to vehicle operation. The following ECO INFO mode will appear on the display by pushing the ECO information button, then turning the selection dial to scroll through the different screens.
W eekly Reset Records of up to the past 4 weeks of each week’s fuel consumption can be shown on the display . NOTE: When the clock is not set, the ECO information (daily and weekly) cannot be used. Reset at Start Records of up to the past 4 times of each time of ignition switch ON fuel consumption can be shown on the display.
2-30 Instruments and controls SIC2045 How to arm the vehicle security system 1. Close all windows. The system can be armed even if the windows are open. 2. Models with Intelligent Key system: Place the ignition switch in the OFF position and remove the Intelligent Key from the vehicle.
NISSAN VEHICLE IMMOBILIZER S Y S- TEM The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of the registered key. If the engine fails to start using the registered key, it may be due to interference caused by another registered key, an automated toll road device or automated payment device on the key ring.
2-32 Instruments and controls service as soon as possible. Please bring all registered keys that you have when visiting a NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident.
SIC3664 The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 Intermittent — intermittent operation can be adjusted by turning the knob toward * A (Slower) or * B (Faster) .
2-34 Instruments and controls WARNING In freezing temperatures the washer solution may freeze on the rear window glass and obscure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION . Do not operate the washer continu- ously for more than 30 seconds.
SIC4520 T ype A SIC4519 T ype B T o defog/defrost the rear window glass and outside mirrors (if so equipped) , start the engine and push the switch * 1 on. The indicator light * 2 will illuminate. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes.
2-36 Instruments and controls SIC3669 Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. T o set the autolight system: 1. Make sure the headlight switch is in the AUT O position * 1 .
SIC3670 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position.
2-38 Instruments and controls SIC4517 SIC4129 Instrument brightness control The instrument brightness control operates when the ignition switch is in the ON position. Push the control knob * A to adjust the bright- ness of the instrument panel lights.
SIC3672 FOG LIGHT SWITCH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. T o turn them off, turn the switch to the OFF position. The headlights must be on for the fog lights to operate.
2-40 Instruments and controls WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat tempera- tures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in serious injury.
The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn off the switch.
2-42 Instruments and controls SIC4525 The power outlet is located in the instrument panel. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory.
SIC4527 Center console SIC4528 Door (front and rear) Soft bottle holders CAUTION . Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. . Do not use bottle holder for open liquid containers.
2-44 Instruments and controls SIC4526 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. T o open the glove box, pull the handle. T o close, push the lid in until the lock latches. The glove box light illuminates when the head- light switch is turned on.
SIC4584 T o install the cargo cover: 1. Open the lift gate. 2. Fix the clip * A on the lift gate lower garnish. 3. Fix the clip * B on the lift gate side garnish. 4. Hook the rope on the clip located on the lift gate side garnish. T o remove the cargo cover: 1.
2-46 Instruments and controls SIC4533 1. Window lock button 2. Driver side window 3. Rear left passenger side window 4. Front passenger side window 5. Rear right passenger side window Main power window switch (driver’s side) T o open or close the window, push down * A or pull up * B the switch and hold it.
SIC4524 Automatic operation The automatic operation is available for the switch that has an mark on its surface. T o fully open or close the window, completely push down or pull up the switch and release it; the switch need not be held. The window will automatically open or close all the way.
2-48 Instruments and controls WARNING . In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. . Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.
Auto reverse function WARNING There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc .
2-50 Instruments and controls SIC4572 MAP LIGHTS (if so equipped) Operate the map light switch to turn the map light on or off. * 1 : ON position * 2 : OFF position SIC4573 MAP LIGHT CONTROL SWIT CH (if so equipped) The map lights control switch has three posi- tions: ON * 1 , OFF * 2 and center.
CARGO LIGHT The cargo room lights illuminate when the lift gate is opened. When the lift gate is closed, the lights will turn off. Instruments and controls 2-51.
2-52 Instruments and controls MEMO.
3 Pre-driving checks and adjustments Keys .............................................................................................. 3-2 NISSAN Vehicle Immobilizer System keys ................... 3-2 Intelligent Keys (if so equipped) .............
3-2 Pre-driving checks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number.
SP A2406 1. Intelligent Key (2 sets) 2. Mechanical key (inside Intelligent Key) (2 sets) 3. Key number plate INTELLIGENT KEYS (if so equipped) Y our vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and NISSAN V ehicle Immobilizer System compo- nents.
3-4 Pre-driving checks and adjustments SP A2033 Mechanical key T o remove the mechanical key, release the lock knob at the back of the Intelligent Key . T o install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.
SP A2602 L OCKING WITH KEY The power door lock system allows you to lock or unlock all doors simultaneously. . T urning the driver’s door key cylinder to the front of the vehicle * 1 will lock all doors and the lift gate. . T urning the driver’s door key cylinder once to the rear of the vehicle * 2 will unlock the driver’s door.
3-6 Pre-driving checks and adjustments Lockout protection Lockout protection function helps to prevent the keys from being accidentally locked inside the vehicle.
It is possible to lock/unlock all doors (including the lift gate) , and activate the panic alarm by using the keyfob from outside the vehicle. Before locking the doors, make sure the key is not left in the vehicle. The keyfob can operate at a distance of approximately 33 ft (10 m) from the vehicle.
3-8 Pre-driving checks and adjustments JVP0213X * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button * 4 Battery indicator light HOW T O USE REMO TE KEYLESS ENTR Y S Y STEM Locking doors 1. Remove the key from the ignition switch. 2. Close all the doors.
Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle. In hazard indicator and horn mode, when the L OCK button * 1 is pushed, the hazard indicator flashes twice and the horn chirps once.
3-10 Pre-driving checks and adjustments WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use. . The Intelligent Key transmits radio waves when the buttons are pushed.
the system function. . Do not drop the Intelligent Key. . Do not strike the Intelligent Key sharply against another object. . Do not change or modify the Intel- ligent Key. . Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is comple- tely dry.
3-12 Pre-driving checks and adjustments SP A2074 INTELLIGENT KEY OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch * 1 .
. Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. SP A2408 SP A2710 SP A2545 INTELLIGENT KEY OPERA TION Y ou can lock or unlock the doors without taking the key out from your pocket or bag.
3-14 Pre-driving checks and adjustments Locking doors 1. Place the ignition switch in the OFF position and carry the Intelligent Key with you.*1 2. Close all the doors.*2 3. Push the door handle request switch (dri- ver’s or front passenger’s) * A or the lift gate request switch * B while carrying the Intelligent Key with you.
TROUBLESHOO TING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The P position selecting warning light in the meter illuminates and the inside warning chime sounds continuously (Continuously Variable T ransmission models) .
3-16 Pre-driving checks and adjustments HOW T O USE REMO TE KEYLESS ENTR Y FUNCTION WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
SP A2252 * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button When you lock or unlock the doors, the hazard indicator will flash and the horn will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” (P .3-17) . Locking doors 1.
3-18 Pre-driving checks and adjustments horn operates. Hazard indicator and horn mode: Operation DOOR LOCK DOOR UNLOCK Pushing door handle request switch or lift gate request switch HAZARD - twice OUT.
WARNING . Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. . If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
3-20 Pre-driving checks and adjustments WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. . Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle.
JVP0208X CAUTION Do not place your foot on or step on the front bumper. Also, do not step on the side sill extensions when getting in or out of the vehicle.
3-22 Pre-driving checks and adjustments WARNING . Gasoline is extremely flammable and highly explosive under certain conditions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
SP A2809 L OOSE FUEL CAP warning message The L OOSE FUEL CAP warning message is displayed on the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed.
3-24 Pre-driving checks and adjustments SP A2808 TIL T OPERA TION Push the lock lever down * 1 and adjust the steering wheel up or down * 2 to the desired position. Pull the lock lever up * 3 securely to lock the steering wheel in place. SIC3451 CAUTION .
SP A2447 INSIDE MIRROR Adjust the angle of the inside mirror to the desired position. SP A2143 The night position * 1 will reduce glare from the headlights of vehicles behind you at night. Use the day position * 2 when driving in daylight hours. WARNING Use the night position only when ne- cessary, because it reduces rear view clarity.
3-26 Pre-driving checks and adjustments SP A2214 Adjusting outside mirrors The outside mirror control switch is located at the lower part of the instrument panel. The outside mirror will operate only when the ignition switch is in the ACC or ON position.
SIC3869 V ANITY MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover. Pre-driving checks and adjustments 3-27.
3-28 Pre-driving checks and adjustments MEMO.
4 Heater, air conditioner, audio and phone sys- tems Safety note .................................................................................. 4-2 Control panel buttons — color screen with navigation system (if so equipped) ....................
4-2 Heater, air conditioner, audio and phone systems WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound.
If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. Reference symbols: “Example” — Words marked in quotes refer to a key shown only on the display.
4-4 Heater, air conditioner, audio and phone systems SAA3387 Adjusting the item: For screens where an item can be adjusted incrementally , such as when adjusting the bass and treble for the audio system, touch the “+” key * 1 or the “ − ” key * 2 to adjust the settings of an item.
. OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or detergent.
4-6 Heater, air conditioner, audio and phone systems to disable the feature entirely. AUX Level: Controls the volume level of incoming sound when an auxiliary device is connected to the system.
times of day, while “ Automatic” controls the display automatically. . Scroll Direction: The direction that menus scroll can be adjusted. Choose either “up” or “down”. SAA3393 Clock: Select the “Clock” key to adjust the time and the appearance of the clock on the display .
4-8 Heater, air conditioner, audio and phone systems SAA3395 Language: Select the “Language” key to adjust the language used by the system. The language can be set to English, Franc ¸ ais or Espan ˜ ol. T ouch click: Select the “T ouch Click” key to toggle the touch click feature on or off.
. Underneath the bumper and the corner areas of the bumper cannot be viewed on the RearView Monitor because of its monitoring range limitation. The system will not show small objects below the bumper, and may not show objects close to the bumper or on the ground.
4-10 Heater, air conditioner, audio and phone systems SAA1978 DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance.
the hill is viewed in the monitor closer than it appears. SAA3440 Backing up near a projecting object The vehicle may seem to nearly clear the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course.
4-12 Heater, air conditioner, audio and phone systems course. OPERA TING TIPS . When the shift lever is shifted to the R (Reverse) position, the monitor screen auto- matically changes to the RearView Monitor mode. However, the radio can be heard. . When the view is switched, the display images on the screen may be displayed with some delay.
SAA2381 SIDE VENTILA T ORS Open or close the vents, and adjust the air flow direction of ventilators as illustrated. WARNING . The air conditioner cooling function operates only when the engine is running. . Do not leave children or adults who would normally require the support of others alone in your vehicle.
4-14 Heater, air conditioner, audio and phone systems SAA3447 1. Air intake lever (Outside air circulation /Air recirculation ) 2. Air flow control dial 3. Fan speed control dial 4. A/C (Air Conditioner) button 5. T emperature control dial 6. Rear window defroster button (See “Rear window and outside mirror defroster switch” (P .
Heater operation Heating: This mode is used to direct heated air to the foot outlets. 1. Move the air intake lever to the position. 2. T urn the air flow control dial to the position.
4-16 Heater, air conditioner, audio and phone systems 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. T urn the temperature control dial to the desired position between the middle and the cool (left) position. . For quick cooling when the outside tem- perature is high, move the air intake lever to the position.
SAA3443 1. AUT O button/Temperature control dial 2. OFF button 3. A/C button 4. CLIMA TE button 5. Display screen* 6. Air flow control buttons 7. Fan speed control dial 8. Front defroster button 9. Air intake button (Outside air circulation /Air recirculation ) 10.
4-18 Heater, air conditioner, audio and phone systems 3. If the A/C indicator light illuminates, push the A/C button. (The A/C indicator light will turn off.) 4. T urn the temperature control dial to set the preferred temperature. The temperature range is between 60 8 F (18 8 C) and 90 8 F (32 8 C) .
illuminates, the flowing air is drawn from outside the vehicle. Automatic air intake control: Push and hold the outside air circulation “ ” /air recirculation “ ” button for more than 1.5 seconds to set the automatic control between the outside air circulation and air recirculation modes.
4-20 Heater, air conditioner, audio and phone systems SAA2368 SAA3441 OPERA TING TIPS (for automatic air conditioner) . When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate. This is not a malfunction.
AUDIO OPERA TION PRECAUTIONS Radio Place the ignition switch in the ACC or ON position and push the PWR (power/VOL (vo- lume)) control to turn on the radio. If you listen to the radio with the engine not running, the ignition switch should be placed in the ACC position.
4-22 Heater, air conditioner, audio and phone systems Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard.
and dehumidify or ventilate the player completely. . The player may skip while driving on rough roads. . The CD player sometimes cannot func- tion when the passenger compartment temperature is extremely high. De- crease the temperature before use. . Only use high quality 4.
4-24 Heater, air conditioner, audio and phone systems . The iPod nano ® (1st Generation) may remain in fast forward or rewind mode if it is connected during a seek operation.
The vehicle is not equipped with a USB device. USB devices should be purchased separately as necessary. This system cannot be used to format USB devices. To format a USB device, use a personal computer. In some states/area, the USB device for the front seats plays only sound without images for regulatory reasons, even when the vehicle is parked.
4-26 Heater, air conditioner, audio and phone systems are converted from analog to digital (A/D conversion) per second. . Multisession — Multisession is one of the methods for writing data to media. Writing data once to the media is called a single session, and writing more than once is called a multisession.
Specification chart (for FM-AM-SAT Radio with Compact Disc (CD) player (T ype A)) : Supported media CD, CD-R, CD-RW Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
4-28 Heater, air conditioner, audio and phone systems Specification chart (for FM-AM-SAT Radio with Compact Disc (CD) player (T ype B)) : Supported media CD, CD-R, CD-RW, USB2.0 Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide (for FM-AM-SA T Radio with Compact Disc (CD) player (T ype A)) : Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly.
4-30 Heater, air conditioner, audio and phone systems T roubleshooting guide (for FM-AM-SA T Radio with Compact Disc (CD) player (T ype B)) : Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty.
SAA2782 1. MUTE button 2. DISP (display)/TEXT button 3. FM·AM radio band select button 4. CD PLA Y button 5. Radio station preset buttons 6. iPod ® button 7. AUX (auxiliary)/SAT band select button 8. Audio display 9. CL OCK button 10. CD EJECT button 11.
4-32 Heater, air conditioner, audio and phone systems Audio main operation Head unit : The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback.
Radio (SAT) band select : Pushing the button will change the band as follows: AUX (if connected portable device) ? XM1* ? XM2* ? XM3* ? AUX (if connected portable device) The last channel played will also come on when the ON·OFF button is pushed to ON.
4-34 Heater, air conditioner, audio and phone systems *: if so equipped Radio Data System (RDS) : RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) encoded within a regular radio broadcast.
CD PLA Y : When the CD button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play. When the CD button is pushed with the CD loaded and the radio playing, the radio will automatically be turned off and the CD will start to play.
4-36 Heater, air conditioner, audio and phone systems CD EJECT: When the CD EJECT button is pushed with the CD loaded, the CD will be ejected. When this button is pushed while the CD is being played, the CD will come out and the system will turn off. If the CD comes out and is not removed, it will be pulled back into the slot to protect it.
iPhone ® 3G may not work with the system in some cases. Make sure that your iPod ® firmware is updated. * 12V-charge iPod ® s are not chargeable with this system. iPod ® button: Place the ignition switch in the ACC or ON position. Then, push the iPod ® button to switch to the iPod ® mode.
4-38 Heater, air conditioner, audio and phone systems AUX (Auxiliary) input AUX IN jack: The AUX IN jack is located on the audio unit. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer.
FM-AM-SA T RADIO WITH COMPACT DISC (CD) PLA YER (T ype B) No satellite radio reception is available unless a SiriusXM Satellite Radio subscription is active. For all operation precautions, see “ Audio opera- tion precautions” (P .4-21) . The satellite radio mode requires an active SiriusXM Satellite Radio subscription.
4-40 Heater, air conditioner, audio and phone systems TUNE (Tuning): . For AM and FM radio T urn the TUNE knob for manual tuning. . For SiriusXM Satellite Radio T urn the TUNE knob to seek channels from all of the categories when any category is not selected.
While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the text is displayed listing the artist, album and song title. Next/Previous T rack and Fast Forward/Rewind: When the or button is pushed for more than 1.
4-42 Heater, air conditioner, audio and phone systems the list to begin playing that song. If an MP3 CD is playing, touching the “Browse” key will also list the folders on the disc. Follow the procedure for selecting a song with the touch screen to choose a folder.
SAA3444 USB memory operation Audio main operation: The USB outlet connector is on the lower center of the instrument panel. Connect a USB memory as illustrated, and then switch to the USB memory mode automatically. If the system has been turned off while the USB memory was playing, pushing the ON·OFF/VOL control knob will start the USB memory.
4-44 Heater, air conditioner, audio and phone systems forwarding. When the button is released, the audio file returns to normal play speed. SAA3491 Random and repeat play mode: While files on a USB device are playing, the play pattern can be altered so that songs are repeated or played randomly.
SAA3445 iPod ® player operation Connecting iPod ® : Connect the iPod ® cable to the USB connector. If the iP od ® supports charging via USB, the battery of the iPod ® will be charged while connected to the vehicle.
4-46 Heater, air conditioner, audio and phone systems was playing, pushing the ON·OFF button will start the iPod ® . . PLA Y: When the button is pushed with the system off and the iPod ® connected, the system will turn on. If another audio source is playing and the iPod ® is connected, push the button repeatedly to switch to the iPod ® mode.
mode is active, the icon is displayed to the left of the song title or album name to denote which repeat pattern is applied. T o cancel Repeat mode, touch the “Repeat” key until no icon is displayed. SAA0451 CD/USB MEMORY CARE AND CLEANING CD . Handle a CD by its edges.
4-48 Heater, air conditioner, audio and phone systems SAA3383 1. SOURCE select switch 2. T uning switch 3. VOLUME control switch STEERING WHEEL SWIT CH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. SOURCE select switch Push the SOURCE select switch to change the mode to available audio source.
— The vehicle is covered with a car cover. . Be sure that antenna is removed before the vehicle enters an auto- matic car wash. . Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation.
4-50 Heater, air conditioner, audio and phone systems WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
phone. . Y ou will not be able to use a hands-free phone under the following conditions: — Y our vehicle is outside of the telephone service area. — Y our vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area.
4-52 Heater, air conditioner, audio and phone systems . This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations. USING THE SY STEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth ® Hands- Free Phone System.
How to say numbers NISSAN V oice Recognition requires a certain way to speak numbers in voice commands. Refer to the rules and examples below. . Either “zero” or “oh” can be used for “0” . Example: 1-800-662-6200 — “One eight oh oh six six two six two oh oh” , or — “One eight zero zero six six two six two oh oh” .
4-54 Heater, air conditioner, audio and phone systems SAA3385 CONTROL BUTTONS The control buttons for the Bluetooth ® Hands- Free Phone System are located on the steering wheel. PHONE SEND Push the button to initiate a VR session or answer an incoming call.
3. Say: “ Add phone” * B . The system acknowl- edges the command and asks you to initiate pairing from the phone handset * C . The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for details.
4-56 Heater, air conditioner, audio and phone systems LIST OF VOICE COMMANDS When you push and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.
commands. . “Help” — The system announces the avail- able commands. . “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call. . “Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call.
4-58 Heater, air conditioner, audio and phone systems Phonebook (phones with automatic phonebook download function) NOTE: Phonebook commands are not available when the vehicle is moving.
calls made to the vehicle that were not answered. “Call Back” * D Use the Call Back command to dial the number of the most recently received call. Connect Phone NOTE: Add Phone command is not available when the vehicle is moving.
4-60 Heater, air conditioner, audio and phone systems 6. If the connected phone is already in use, the system will prompt you to overwrite. Follow the instructions provided by the system. 7. When preparation is complete and you are ready to begin, push the button.
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
4-62 Heater, air conditioner, audio and phone systems MEMO.
5 Starting and driving Precautions when starting and driving ................................ 5-3 Exhaust gas (carbon monoxide) ...................................... 5-3 Three-way catalyst .............................................................
Cold weather driving ............................................................. 5-43 Freeing a frozen door lock ............................................. 5-43 Anti-freeze .........................................................................
WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle.
5-4 Starting and driving system, underbody, or rear of the vehicle. THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants.
pressure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale.
5-6 Starting and driving sure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF . If you have a flat tire, replace it with a spare tire as soon as possi- ble.
A VOIDING COLLISION AND ROLL - OVER WARNING Failure to operate this vehicle in a safe and prudent manner may result in loss of control or an accident. Be alert and drive defensively at all times.
5-8 Starting and driving WARNING The following actions can increase the chance of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collision and result in personal injury. . The vehicle generally moves or pulls in the direction of the flat tire.
. Do not drive across steep slopes. Instead drive either straight up or straight down the slopes. Off-road vehicles can tip over sideways much more easily than they can forward or backward. . Many hills are too steep for any vehicle. If you drive up them, you may stall.
5-10 Starting and driving ment even if the other two wheels are raised off the ground. Make sure you inform test facility personnel that your vehicle is equipped with AWD before it is placed on a dynamometer.
SSD0392 CONTINUOUSL Y V ARIABLE TRANS- MISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position. . When turning the ignition switch to the L OCK position, make sure that the shift lever is in the P (Park) position.
5-12 Starting and driving KEY POSITIONS L OCK (0) The key can only be removed from the ignition switch at this position. OFF (1) The engine is turned off. The power supply is turned off. ACC (2) The electrical accessory power activates without the engine turned on.
. The cargo room area is not included in the operating range but the Intelligent Key may function. . If the Intelligent Key is placed on the instrument panel, inside the glove box or door pocket, the Intelligent Key may not function. . If the Intelligent Key is placed near the door or window outside the vehicle, the Intelligent Key may function.
5-14 Starting and driving PUSH-BUTT ON IGNITION SWIT CH POSITIONS L OCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key.
4. Push the ignition switch while depressing the brake pedal within 10 seconds after the chime sounds. The engine will start. After step 3 is performed, when the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change to ACC.
5-16 Starting and driving . If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Crank the engine for 5 - 6 seconds. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedal by turning the ignition switch to ST ART.
position to start cranking the engine. After 5 or 6 seconds, stop cranking by pushing the ignition switch to OFF. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedal by depressing the brake pedal and pushing the push-button ignition switch to start the engine.
5-18 Starting and driving 2. Keep the foot brake pedal depressed, push the shift lever button and move the shift lever to a driving position. 3. Release the parking brake and foot brake pedal, and then gradually start the vehicle in motion.
WARNING Apply the parking brake if the shift lever is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage.
5-20 Starting and driving JVS0388X Paddle shifter (if so equipped) Manual shift mode (if so equipped) When the shift lever is shifted from the D position to the manual shift gate, the transmis- sion enters the manual shift mode.
M1 (1st) : Use this position when climbing steep hills slowly or driving slowly through deep snow, sand or mud, or for maximum engine braking on steep downhill grades. . Remember not to drive at high speeds for extended periods of time in lower than M6 (except for NISMO and NISMO RS models) , M7 (NISMO models) or M8 (NISMO RS models) range.
5-22 Starting and driving safe place and allow the transmission to return to normal operation, or have it repaired if necessary. SSD1142 Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed.
others. MANUAL TRANSMISSION (MT) WARNING . Do not downshift abruptly on slip- pery roads. This may cause a loss of control. . Do not over-rev the engine when shifting to a lower gear.
5-24 Starting and driving T o back up, pull the shift lever ring * 1 upward and then move it to the R (Reverse) gear after stopping the vehicle completely. The shift lever ring returns to its original position when the shift lever is moved to the N (Neutral) position.
The Integrated Control System is located below the audio system or navigation system (if so equipped) . T wo Integrated Control System modes can be selected: Drive mode and Climate Control mode. Depending on which Integrated Control System mode selected (Drive mode or Climate Control mode) , the screen display and some button functions will change.
5-26 Starting and driving SSD1144 Example DRIVE MODE Three drive modes (NORMAL, SPORT and ECO) can be selected depending on the driving condition. When each mode is selected, the control state of the engine, CVT (if so equipped) , steering and climate appears on the display briefly.
. At start up, the vehicle is automatically set to the NORMAL drive mode. SSD1146 SPORT drive mode The SPORT drive mode is recommended for an enhanced performance feel. T o set the SPORT drive mode, press the drive mode select button. The control state of the engine, CVT (if so equipped) , steering and climate control is displayed briefly.
5-28 Starting and driving SSD1147 ECO drive mode The ECO drive mode is recommended for maximum fuel economy. In the ECO drive mode, the engine and CVT (if so equipped) are adjusted to enhance fuel economy. T o set the ECO drive mode, press the drive mode select button and then press the ECO drive mode button.
screen. WARNING . Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. . Do not release the parking brake from outside the vehicle. . Do not use the shift lever in place of the parking brake.
5-30 Starting and driving PRECAUTIONS ON CRUISE CON- TROL . If the cruise control system malfunctions, it will cancel automatically. The CRUISE in- dicator light on the meter panel will then blink to warn the driver. . If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically.
accelerator pedal. Y our vehicle will maintain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not maintain the set speed on winding or hilly roads.
5-32 Starting and driving Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. . Avoid rapid starts and stops. . Use smooth, gentle accelerator and brake application whenever possible.
. Keep your engine tuned up. . Follow the recommended scheduled main- tenance. . Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. . Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy.
5-34 Starting and driving engine is running. If the AWD warning light (yellow) illumi- nates, the AWD mode indicator lights will turn off. Push the AWD mode switch, located on the instrument panel, to select 2WD, AWD-V or AWD. AWD-V : Push the AWD mode switch to the neutral (AWD-V) position.
A WD shift tips . If the AWD mode switch is operated while making a turn, accelerating or decelerating, or if the ignition switch is turned off while in the AWD-V or AWD mode, you may feel a jolt.
5-36 Starting and driving warning light will either remain illuminated or blink. High-temperature power train oil due to con- tinuous operation of the vehicle to free a stuck vehicle makes the warning light blink rapidly (about twice per second) . The driving mode may change to the 2WD mode.
SSD0488 WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle.
5-38 Starting and driving 4. Models with Intelligent Key system: Place the ignition switch in the OFF position. Models without Intelligent Key system: Place the ignition switch in the L OCK position and remove the key. WARNING . If the engine is not running or is turned off while driving, the power assist for the steering will not work.
BRAKING PRECAUTION S The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly. This is not a malfunction and indicates that the brake assist mechanism is operating properly.
5-40 Starting and driving BRAKE ASSIST When the force applied to the brake pedal exceeds a certain level, the Brake Assist is activated generating greater braking force than a conventional brake booster even with light pedal force.
indicate a malfunction. If the computer senses a malfunction, it switches the ABS off and illuminates the ABS warning light on the instrument panel. The brake system then oper- ates normally, but without anti-lock assistance. If the ABS warning light illuminates during the self-test or while driving, have the vehicle checked by a NISSAN dealer.
5-42 Starting and driving occurs, you may hear a “clunk” noise and/or feel a pulsation in the brake pedal. This is normal and is not an indication of a malfunction.
FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob.
5-44 Starting and driving . Allow more stopping distance under these conditions. Braking should be started sooner than on dry pave- ment. . Allow greater following distances on slippery roads. . Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas.
6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Emergency engine shut off (models with Intelligent Key system) ................................................................................ 6-2 Flat tire .
6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road.
TIRE PRESSURE MONIT ORING SY S- TEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare.
6-4 In case of emergency WARNING . Make sure the parking brake is securely applied and the Manual T ransmission is shifted into R (Re- verse) , or the Continuously V ariable T ransmission into P (Park) . . Never change tires when the vehicle is on a slope, ice or slippery areas.
SCE0947 The spare tire is located under the cargo floor board. Loosen the clamp * 2 and remove the spacer * 1 and take out the spare tire. Jacking up the vehicle and removing the damaged tire WARNING . Never get under the vehicle while it is supported only by the jack.
6-6 In case of emergency SCE0948 Jack-up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack-up point. Align the jack head between the two notches in the front or the rear as shown.
SCE0933 Installing the spare tire The spare tire is designed for emergency use. (See specific instructions under the heading “Wheels and tires” (P .8-30) .) 1. Clean any mud or dirt from the surface between the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger tight.
6-8 In case of emergency heading “ Wheels and tires” (P .8-30) . T o start your engine with a booster battery, the instructions and precautions below must be followed. WARNING . If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death.
SCE0981 WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle * B , position the two vehicles ( * A and * B ) to bring their batteries into close proximity to each other.
6-10 In case of emergency CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, place the ignition switch in the OFF position and wait 10 seconds before trying again.
Do not stop the engine. 3. T urn off the air conditioner (if so equipped) . Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed. 4. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood.
6-12 In case of emergency When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from a NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing.
SCE0950 T wo-wheel drive models T OWING RECOMMENDED BY NISSAN T wo-Wheel Drive (2WD) models NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
6-14 In case of emergency SCE0952 All-wheel drive models All-Wheel Drive (AWD) models NISSAN recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow AWD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain.
SCE0951 Front (except for NISMO models) JVE0109X Front (NISMO models) SCE0833 Front : 1. Remove the hook cover * 1 from the bumper with a suitable tool. 2. Securely install the recovery hook * 2 as illustrated. Make sure that the hook is properly secured in its original position after use.
6-16 In case of emergency . Never tow a vehicle using the vehi- cle tie down hook or recovery hook. . Always pull the cable straight out from the front of the vehicle. Never pull on the vehicle at an angle. . Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cool- ing systems.
7 Appearance and care Cleaning exterior ....................................................................... 7-2 Washing ................................................................................. 7-2 Waxing ..................................
7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
JVA0014X Model with rear spoiler CAUTION Do not use an automatic car wash for model with rear spoiler. The rear spoiler may be damaged. W AXING Regular waxing protects the paint surface and helps retain new vehicle appearance. Polishing is recommended to remove built-up wax residue and to avoid a weathered appearance before reapplying wax.
7-4 Appearance and care WHEELS Wash the wheels when washing the vehicle to maintain their appearance. . Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. . Inspect wheel rims regularly for dents or corrosion.
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth dam- pened in mild soap solution, then wipe clean with a dry soft cloth.
7-6 Appearance and care FL OOR MA TS WARNING T o avoid potential pedal interference that may result in a collision or injury: . NEVER place a floor mat on top of another floor mat in the driver front position. . Use only genuine NISSAN floor mats specifically designed for use in your vehicle model.
belts, since these materials may se- verely weaken the seat belt webbing. MOST COMMO N F ACTORS CONTRI- BUTING T O VEHICLE CORROSIO N . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas.
7-8 Appearance and care Remove dirt with a vacuum cleaner. . Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them.
8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ..................................
8-2 Maintenance and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle good mechan- ical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely. Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts.
8-4 Maintenance and do-it-yourself comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washers operate properly and that the wipers do not streak.
When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
8-6 Maintenance and do-it-yourself improper servicing may result in operating difficulties or excessive emissions, and could affect your warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. SDI2639 MR16DDT ENGINE 1.
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors.
8-8 Maintenance and do-it-yourself SDI2641 CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level * 2 , open the reservoir cap and add coolant up to the MAX level * 1 .
opening. Do not overfill * B . 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the break- in period, depending on the severity of operating conditions. CAUTION Oil level should be checked regularly.
8-10 Maintenance and do-it-yourself Engine oil and filter 1. Oil filler cap 2. Oil drain plug 3. Oil filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug with a wrench and completely drain the oil.
When checking or replacement is required, we recommend a NISSAN dealer for servicing. CAUTION . Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. . Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT , which is not covered by the NISSAN new vehicle limited warranty.
8-12 Maintenance and do-it-yourself SDI2429 T o fill the window washer fluid reservoir, lift the cap and pour the window washer fluid into the reservoir opening. Add a washer solvent to the washer for better cleaning. In the winter season, add a windshield washer antifreeze.
. Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. . Make certain the terminal connections are clean and securely tightened. . If the vehicle is not to be used for 30 days or longer, disconnect the negative 7 battery terminal cable to prevent discharging it.
8-14 Maintenance and do-it-yourself SDI1480C 1. Remove the cell plugs * A . 2. Add distilled water up to the UPPER LEVEL * 1 line. If the side of the battery is not clear, check the distilled water level by looking directly above the cell; the condition * 1 indicates OK and the condition * 2 needs more to be added.
SDI1881 1. Alternator 2. Drive belt auto-tensioner 3. Crankshaft pulley 4. Air conditioner compressor 5. Water pump WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unex- pectedly.
8-16 Maintenance and do-it-yourself SDI2670 REPLACING SPARK PLUGS If replacement is required, see a NISSAN dealer for servicing. Iridium platinum-tippe d spark plugs It is not necessary to replace the iridium platinum-tipped spark plugs as frequently as the conventional type spark plugs since they will last much longer.
CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
8-18 Maintenance and do-it-yourself SDI1865 Be careful not to clog the washer nozzle * A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin * B .B e careful not to damage the nozzle.
light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “NISSAN Service and Maintenance Guide”.
8-20 Maintenance and do-it-yourself SDI1754 6. If the fuse is open * A , replace it with a new fuse * B . 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. The holder * 4 also contains the fuses. For checking and/or replacing, see a NISSAN dealer.
SDI2643 P ASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse.
8-22 Maintenance and do-it-yourself SDI2705 Extended storage fuse switch (if so equipped) T o reduce battery drain, the extended storage fuse switch comes from the factory switched off. Prior to delivery of your vehicle, the switch is pushed in (switched on) and should always remain on.
SDI2134 KEYFOB Replace the battery in the keyfob as follows: 1. Remove the screw. 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. 3. Replace the battery with a new one.
8-24 Maintenance and do-it-yourself SDI2451 INTELLIGENT KEY Replace the battery in the Intelligent Key as follows: 1. Remove the mechanical key from the In- telligent Key. 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part.
may cause undesired operation. Note: Changes or modifications not ex- pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with RSS-210 of Industry Canada.
8-26 Maintenance and do-it-yourself JVM0264X 1. Map light 2. Front side marker light 3. Front fog light (if so equipped) 4. Headlight (high-beam/low-beam) 5. Front turn signal light 6. Front parking light 7. Side turn signal light 8. Daytime running light (NISMO models) 9.
HEADLIGHTS Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer.
8-28 Maintenance and do-it-yourself EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight high/low beams (Halogen) 65/55 HB5 Front turn signal light* 21 PY21W Front fog light (if so equipped)* 35 H8 Front side marker light* 3.
SDI2391 Map light SDI2653 Cargo light Maintenance and do-it-yourself 8-29.
8-30 Maintenance and do-it-yourself If you have a flat tire, see “Flat tire” (P .6-3) . TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare.
SDI2503 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “V ehicle load- ing information” (P .9-14) . * 3 Original size: The size of the tires originally installed on the vehicle at the factory .
8-32 Maintenance and do-it-yourself SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem.
Except for NISMO and NISMO RS models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE P215/55R17 93V 230 kPa, 33 PSI (2WD MT models) 250 kPa, 36 PSI (2WD CVT models) 240 kPa, 34 PSI (AWD models.
8-34 Maintenance and do-it-yourself For NISMO models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) REAR ORIGINAL TI.
For NISMO RS models: SIZE COLD TIRE INFLA TION PRESSURE FRONT ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI (2WD MT models) 240 kPa, 35 PSI (AWD models) REAR ORIGINAL TIRE 225/45R18 95Y 230 kPa, 33 PSI .
8-36 Maintenance and do-it-yourself SDI1606 Example * 1 Tire size (example: P215/60R16 94H) 1. P: The “P” indicates the tire is designed for passenger vehicles. (Not all tires have this information.) 2. Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge.
5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. * 3 Tire ply composition and material The number of layers or plies of rubber- coated fabric in the tire.
8-38 Maintenance and do-it-yourself All season tires NISSAN specifies all season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season tires are identified by ALL SEASON and/or M&S (Mud and Snow) on the tire sidewall.
SDI1662 CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km) . (See “Flat tire” (P .6-3) for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench.
8-40 Maintenance and do-it-yourself wear indicators are visible, the tire(s) should be replaced. . Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician, because some tire damage may not be obvious.
. Do not install a damaged or de- formed wheel or tire even if it has been repaired. Such wheels or tires could have structural damage and could fail without warning.
8-42 Maintenance and do-it-yourself . With the TEMPORAR Y USE ONL Y spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h) . . When driving on roads covered with snow or ice, the TEMPORARY USE ONL Y spare tire should be used on the rear wheels and original tire used on the front wheels (drive wheels) .
MEMO Maintenance and do-it-yourself 8-43.
8-44 Maintenance and do-it-yourself MEMO.
9 T echnical and consumer information Capacities and recommended fuel/lubricants ................... 9-2 Fuel information ................................................................... 9-4 Engine oil and oil filter recommendation ................
9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.
Capacity (Approximate) Recommended specifications US measure Imp measure Liter Differential gear oil — — — . For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 32 8 F( 0 8 C) .
9-4 T echnical and consumer information FUEL INFORMA TION Except for NISMO RS models: NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Re- search octane number 96) .
and/or fuel system damage. . The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. . If an oxygenate-blend, other than methanol blend is used, it should contain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.
9-6 T echnical and consumer information encountered, have your vehicle checked at a NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills.
Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be operated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage.
9-8 T echnical and consumer information ENGINE Model MR16DDT T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder, in-line Bore 6 Stroke in (mm) 3.138 6 3.193 (79.7 6 81.1) Displacement cu in (cm 3 ) 98.78 (1,618) Firing order 1-3-4-2 Idle speed rpm No adjustment is necessary.
Tire T ype Size Pressure PSI (kPa) [Cold] Conven- tional P215/55- R17 93V 33 (230)*1 36 (250)*2 34 (240)*3 NISMO models 225/45R18 95Y 33 (230)*1 35 (240)*3 Spare T135/80- D16 101M*1*2 60 (420) T135/90- D16 102M*3 NISMO RS models T135/70- D17 92M *1: 2WD MT model *2: 2WD CVT model *3: AWD model DIMENSIONS AND WEIGHTS Overall length in (mm) 162.
9-10 T echnical and consumer information STI0787 VEHICLE IDENTIFICA TION NUMBER (VIN) PLA TE The vehicle identification number plate is at- tached as shown.
JVT0077X F .M.V.S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F .M.V.S.S./C.M.V .S.S.) certification label is affixed as shown.
9-12 T echnical and consumer information STI0776 AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is at- tached to the engine compartment as shown.
STI0784 Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . J-nut 6 2 . Screw 6 2 . Screw grommet 6 2 1. Park the vehicle on flat, level ground.
9-14 T echnical and consumer information 8. Install the license plate bracket with the screws. 9. Install the license plate with bolts that are not longer than 0.55 in (14 mm) . WARNING . It is extremely dangerous to ride in a cargo area inside the vehi- cle.
weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the subtracted weight of occu- pants from the load limit.
9-16 T echnical and consumer information 4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs.
Do not tow a trailer with your vehicle. T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION . Failure to follow these guidelines can result in severe transmission damage.
9-18 T echnical and consumer information DO T (Department Of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Y our NISSAN is covered by the following emission warranties. For USA: . Emission Defects Warranty . Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your Warranty In- formation Booklet which comes with your NISSAN.
9-20 T echnical and consumer information (French speakers) . T o notify NISSAN of any safety concerns please contact our Consumer Information Centre toll free at 1-800-387-0122 WARNING A vehicle equip.
This vehicle is equipped with an Event Data Recorder (EDR) . The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems per- formed.
9-22 T echnical and consumer information MEMO.
10 Index A ABS (Anti-lock Braking System) ............................ 5-40 Advanced air bag system ......................................... 1-42 Air bag system Advanced air bag system .................................. 1-42 Front passenger air bag and status light.
10-2 Checking engine coolant level ............................. 8-8 Corrosion protection ............................................ ........ 7-7 Cover, Cargo cover .................................................... 2-44 Cruise control ...........
Glove box....................................... ............................... 2-44 H Hands-Free Phone System, Bluetooth ® ............... 4-50 Hazard warning flasher switch ................................... 6-2 Head restraints/headrests ........
10-4 Mechanical key (Intelligent Key system) ................. 3-4 Meter T rip computer ........................................................ 2-10 Meters and gauges ....................................... ................ 2-5 Instrument brightness control .
Seat belt warning light ........................................ 2-16 Seat belts............................................................... 1-10 Seat belts with pretensioners ........................... 1-48 Shoulder belt height adjustment .......
10-6 U Underbody cleaning ..................................................... 7-3 Uniform tire quality grading ...................................... 9-18 USB memory operation ............................................. 4-43 V V anity mirror......
.
FUEL INFORMA TION: Except for NISMO RS models: NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Re- search octane number 96) .
® 2014 JUK E OWN E R’S MAN UAL For y our s af ety , read car efully and keep in this v ehicle. 2014 N I SSAN J U K E F15-D F15-D Printing : November 2013 (23) Publication No.
Een belangrijk punt na aankoop van elk apparaat Nissan Juke (2014) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan Juke (2014) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan Juke (2014) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan Juke (2014) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan Juke (2014) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan Juke (2014) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan Juke (2014) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan Juke (2014) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
