Gebruiksaanwijzing /service van het product Rogue Select (2015) van de fabrikant Nissan
Ga naar pagina of 322
® 2015 ROG U E SE LEC T OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. I n f o r m a t i o n P r o v i d e d b y :.
Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure.
MODIFICA TION OF Y OUR VEHI- CLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems result- ing from modification may not be covered under NISSAN warranties.
SIC0697 If you see the symbol above, it means “Do not do this” or “Do not let this happen” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action.
NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
I n f o r m a t i o n P r o v i d e d b y :.
I n f o r m a t i o n P r o v i d e d b y :.
Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving checks and adjustments Heater, air conditioner, audio, phone and v.
I n f o r m a t i o n P r o v i d e d b y :.
0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ............................................................................ 0-2 Exterior front .................................................................
0-2 Illustrated table of contents SSI0348 1. Supplemental front-impact air bags (Page 1-41) 2. Front seat-mounted side-impact supplemental air bags (P .1-41) 3. Seat belts (P .1-9) 4. Head restraints (P .1-5) — Front-seat Active Head Restraints (P .
JVC0751X 1. Hood (P .3-9) 2. Headlight and turn signal lights — Switch operation (P .2-29) — Bulb replacement (P .8-24) 3. Windshield wiper and washer — Switch operation (P .2-27) — Blade replacement (P .8-17) — Window washer fluid (P .8-12) 4.
0-4 Illustrated table of contents JVC0576X 1. Lift gate (P .3-10) 2. Rearview camera* (P .4-2) 3. Rear window wiper and washer — Switch operation (P .2-28) — Window washer fluid (P .8-12) 4. Rear window defroster (P .2-29) 5. High-mounted stop light — Bulb replacement (P .
JVC0577X 1. Cargo cover* (P .2-36) 2. Coat hooks (P .2-38) 3. Ceiling light (P .2-43) 4. Door armrest — Power window switch (P .2-39) — Power door lock switch (P .3-4) 5. Sun visors (P .3-13) 6. Front map lights (P .2-42) 7. Sunglasses holder (P .
0-6 Illustrated table of contents JVC0578X 1. Side ventilator (P .4-7) 2. Headlight and turn signal switch (P .2-29) 3. Steering-wheel-mounted controls (left side)* — Audio control* (P .4-37) — Bluetooth Hands-Free Phone System con- trol* (P .
JVC0301X 1. T achometer (P .2-6) 2. Warning/indicator lights (P .2-9) 3. V ehicle information display (P .2-17) 4. Speedometer (P .2-5) 5. Engine coolant temperature gauge (P.2-6) 6. switch (twin trip odometer control and brightness control) (P .2-5, P .
0-8 Illustrated table of contents SDI2127 QR25DE ENGINE 1. Engine oil filler cap (P .8-9) 2. Brake fluid reservoir (P .8-11) 3. Air cleaner (P .8-16) 4. Engine coolant reservoir (P .8-8) 5. Window washer fluid reservoir (P .8-12) 6. Engine drive belt location (P .
Warning light Name Page All-Wheel Drive (A WD) warning light (AWD models) (if so equipped) 2-10 Anti-lock Braking System (ABS) warning light 2-10 Brake warning light 2-11 Charge warning light 2-11 Ele.
0-10 Illustrated table of contents MEMO I n f o r m a t i o n P r o v i d e d b y :.
1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats .......................................................................
1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries.
SSS0792 FRONT SEA TS Front manual seat adjustment Forward and backward: Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining: T o recline the seatback, pull the lever * 2 up and lean back.
1-4 Safety — Seats, seat belts and supplemental restraint system SSS0797 REAR SEA TS Folding Before folding the rear seats: . Secure the seat belts on the seat belt hooks on the side wall.
WARNING Head restraint/headrest supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions. Adjustable head restraints/head- rests must be adjusted properly, as specified in this section.
1-6 Safety — Seats, seat belts and supplemental restraint system SSS0992 ADJUST ABLE HEAD RESTRAINT/ HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Multiple notches 3. Lock knob 4. Stalks JVR0203X NON-ADJUST ABLE HEAD RE- STRAINT/HEADREST COMPONENTS 1.
SSS1038 INST ALL 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the adjustment notch * 1 must be installed in the hole with the lock knob * 2 .
1-8 Safety — Seats, seat belts and supplemental restraint system SSS1035 Raise T o raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position.
PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
1-10 Safety — Seats, seat belts and supplemental restraint system SSS0016 SSS0014 WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint.
. Once a seat belt with pretensioner has activated, it cannot be reused and must be replaced together with the retractor. See a NISSAN dealer. . Removal and installation of the pretensioner system components should be done by a NISSAN dealer.
1-12 Safety — Seats, seat belts and supplemental restraint system JVR0183X WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Re- tractor (ALR) mode seat belts.
SSS0290 3. Position the lap belt portion low and snug on the hips as shown. 4. Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: .
1-14 Safety — Seats, seat belts and supplemental restraint system If the retractor does not lock during this check or if you have any question about seat belt operation, see a NISSAN dealer. SSS0351A Shoulder belt height adjustment The shoulder belt anchor height should be adjusted to the position best for you.
SSS0798 Seat belt hooks When the rear seat belts are not in use and when folding down the rear seats, hook the rear outer seat belts on the seat belt hooks. SSS0391 Rear center seat belt The rear center seat belt has a connector tongue * 1 and a seat belt tongue * 2 .
1-16 Safety — Seats, seat belts and supplemental restraint system SSS0703 The center seat belt buckle and the tongue are identified by the CENTER mark.
in the correct position, serious per- sonal injury may result in an acci- dent or sudden stop. SSS0800 Attaching rear center seat belt: Always be sure the rear center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat.
1-18 Safety — Seats, seat belts and supplemental restraint system center seat belt connector is com- pletely secured. . If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious per- sonal injury may result in an acci- dent or sudden stop.
JVR0183X WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Re- tractor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode acti- vated, the child can be seriously injured or killed if the seat belt retracts and becomes tight.
1-20 Safety — Seats, seat belts and supplemental restraint system the front seat. This is especially important because your vehicle has a supplemental restraint sys- tem (Air bag system) for the front passen- ger. See “Supplemental Restraint System” (P .
SSS0099 SSS0100 PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- stallation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child restraint must be used and installed properly.
1-22 Safety — Seats, seat belts and supplemental restraint system — Keep seatbacks as upright as possible after fitting the child restraint. — Infants and children should al- ways be placed in an appropri- ate child restraint while in the vehicle.
SSS0801 LA TCH label location Lower Anchors and T ethers for CHildren System (LA T CH) Y our vehicle is equipped with special anchor points that are used with the LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system.
1-24 Safety — Seats, seat belts and supplemental restraint system SSS0637 LA TCH lower anchor location LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA TCH lower anchors.
vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not removed, it may damage the top tether strap during a collision. Y our child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.
1-26 Safety — Seats, seat belts and supplemental restraint system Follow these steps to install a rear-facing child restraint using the LA TCH system: 1. Position the child restraint on the seat. Always follow the child restraint manufac- turer’s instructions.
SSS0639 Rear-facing — step 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments.
1-28 Safety — Seats, seat belts and supplemental restraint system SSS0100 REAR-F ACING CHILD RESTRAINT IN- ST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint.
seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. P osition the child restraint on the seat. Always follow the restraint manufacturer’s instructions. SSS0654 Rear-facing — step 2 2.
1-30 Safety — Seats, seat belts and supplemental restraint system SSS0656 Rear-facing — step 4 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.
seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
1-32 Safety — Seats, seat belts and supplemental restraint system SSS0647 Forward-facing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments.
SSS0802 Installing top tether strap WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle.
1-34 Safety — Seats, seat belts and supplemental restraint system SSS0640 Forward-facing (front passenger seat) — step 1 Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint.
SSS0651 Forward-facing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
1-36 Safety — Seats, seat belts and supplemental restraint system SSS0641 Forward-facing — step 8 8. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path.
SSS0802 Installing top tether strap WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle.
1-38 Safety — Seats, seat belts and supplemental restraint system LRS0455 Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: . Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213.
seat belts. Refer to all W arnings and Cautions in the “Child safety”, “Child restraints” and “Booster seats” sections earlier in this section before installing a child restraint. Follow these steps to install a booster seat in the rear seat or in the front passenger seat: SSS0640 1.
1-40 Safety — Seats, seat belts and supplemental restraint system try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjusting the seat belt routing.
PRECAUTIONS ON SUPPLEMEN T AL RESTRAINT SY STEM This Supplemental Restraint System (SRS) section contains important information concern- ing the following systems: . Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) .
1-42 Safety — Seats, seat belts and supplemental restraint system SSS0131 SSS0132 WARNING . The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower se- verity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
back against the seatback and as far-away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened.
1-44 Safety — Seats, seat belts and supplemental restraint system SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations.
SSS0059A Do not lean against doors or windows. SSS0188A SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact sup- plemental air bags and roof-mounted curtain side-impact and rollover supple- mental air bags: .
1-46 Safety — Seats, seat belts and supplemental restraint system . The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force.
NISSAN ADVANCED AIR BAG S Y S- TEM (front seats) This vehicle is equipped with the NISSAN Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. All of the information, cautions and warnings in this manual apply and must be followed.
1-48 Safety — Seats, seat belts and supplemental restraint system SSS0803 Front passenger air bag status light Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some conditions. Read this section carefully to learn how it operates.
to be seated and wearing the seat belt properly for the most effective protection by the seat belt and supplemental air bag. NISSAN recommends that pre-teens and chil- dren be properly restrained in a rear seat. NISSAN also recommends that appropriate child restraints and booster seats be properly installed in a rear seat.
1-50 Safety — Seats, seat belts and supplemental restraint system . Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave permanent impressions in the seat. Such objects can damage the seat or occupant classification sensor (pattern sensor) .
and guide the buyer to the appropriate sections in this Owner’s Manual. SSS0521 FRONT SEA T -MOUNTED SIDE-IM- P ACT SUPPLEMENT AL AIR BAG AND ROOF-MOUNTED CURT AIN SIDE-IM- P ACT AND ROLL OVER SUPPLEMEN- T AL AIR BAG SY STEMS The side air bags are located in the outside of the seatback of the front seats.
1-52 Safety — Seats, seat belts and supplemental restraint system practical from the door finishers and side roof rails. The side air bags and curtain air bags inflate quickly in order to help protect the occupants in the outboard seating positions.
. If the vehicle becomes involved in a collision but a pretensioner is not activated, be sure to have the pre- tensioner system checked and, if necessary, replaced by a NISSAN dealer. . No unauthorized changes should be made to any components or wiring of the pretensioner system.
1-54 Safety — Seats, seat belts and supplemental restraint system SSS1020 SUPPLEMENT AL AIR BAG W ARNING LABELS Warning labels about the supplemental front- impact air bag systems are placed in the vehicle as shown in the illustration. * 1 SRS air bag The warning labels are located on the surface of the sun visors.
When maintenance work is required on the vehicle, the front air bags, side air bags, curtain air bags and pretensioners and related parts should be pointed out to the person performing the maintenance. The ignition switch should always be in the L OCK position when working under the hood or inside the vehicle.
1-56 Safety — Seats, seat belts and supplemental restraint system MEMO I n f o r m a t i o n P r o v i d e d b y :.
2 Instruments and controls Instrument panel ........................................................................ 2-3 Meters and gauges ................................................................... 2-4 Speedometer ............................
Interior lights ............................................................................ 2-42 Map lights ........................................................................... 2-42 Ceiling light ...............................................
JVC0578X 1. Side ventilator 2. Headlight and turn signal switch 3. Steering-wheel-mounted controls (left side) (if so equipped) — Audio control — Bluetooth Hands-Free Phone system con- trol 4. Steering wheel — Horn — Driver supplemental air bag 5.
2-4 Instruments and controls JVC0301X 1. T achometer 2. Warning/indicator lights 3. V ehicle information display 4. Speedometer 5. Engine coolant temperature gauge 6. switch (twin trip odometer control and brightness control) 7. switch (settings control and trip computer control) 8.
SIC4534 SPEEDOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h) . SIC4575 ODOMETER/TWIN TRIP ODOMETER The odometer and twin trip odometer are displayed on the vehicle information display when the ignition switch is in the ON position.
2-6 Instruments and controls SIC4535 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM) . Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed.
SIC4511 FUEL GAUGE The gauge * A indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills.
2-8 Instruments and controls INSTRUMENT BRIGHTN ESS CON- TROL The instrument brightness control operates when the headlight switch is in the or position. T urn the control * A to adjust the brightness of the meter panel and the instrument panel lights.
All-Wheel Drive (AWD) warning light (AWD models) (if so equipped) Master warning light Malfunction Indicator Light (MIL) Anti-lock Braking System (ABS) warning light Seat belt warning light Overdrive .
2-10 Instruments and controls CHECKING BULBS With all doors closed, apply the parking brake and turn the ignition switch to the ON position without starting the engine.
function is turned off. The brake system then operates normally, but without anti-lock assis- tance. (See “Brake system” (P .5-25) .) Brake warning light This light functions for both the parking brake and the foot brake systems.
2-12 Instruments and controls When the electric power steering warning light illuminates with the engine running, the power assist to the steering will cease operation but you will still have control of the vehicle. At this time, greater steering efforts are required to operate the steering wheel, especially in sharp turns and at low speeds.
WARNING . If the light does not illuminate with the ignition switch turned ON, have the vehicle checked by a NISSAN dealer as soon as possible. . If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible.
2-14 Instruments and controls occupied. For about 5 seconds after the ignition switch is in the ON position, the system does not activate the warning light for the front passenger.
Front passenger air bag status light The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light opera- tion, see “NISSAN Advanced Air Bag System (front seats)” (P .
2-16 Instruments and controls Overdrive off indicator light The overdrive off indicator light illuminates when the overdrive off mode is selected. For additional information, see “Continuously V ariable T ransmission (CVT)” (P .5-9) of this manual.
JVI1226X 1. Outside temperature 2. Operation indicators and warnings — T rip computer — Cruise control* — Settings menu 3. Odometer 4. T win trip odometer 5. Continuously V ariable T ransmission (CVT) posi- tion indicator 6. switch (settings control and trip computer control) 7.
2-18 Instruments and controls ter” (P .2-21) .) The outside temperature sensor is located in front of the radiator. The sensor may be affected by road or engine heat, wind directions and other driving conditions. The display may differ from the actual outside temperature or the temperature displayed on various signs or bill- boards.
INDICA T ORS FOR OPERA TION The design of the warnings and alerts may differ depending on the model. 1. Door open warning This warning appears if any of the doors are open or not closed securely . The vehicle icon indicates which door is open on the display.
2-20 Instruments and controls warning. For more information, see “Extended storage fuse switch” (P .8-21) . SIC4538 INDICA T ORS FOR MAINTENAN CE 1. Service due indicator This indicator appears when the customer set distance comes for service due, for example, for engine oil and oil filter.
replacement indicator as a guide only and always perform regular tire checks. Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could occur and may lead to a collision, which could result in serious personal injury or death.
2-22 Instruments and controls SIC4541 Example* *: The display unit can be converted or varies depending on the vehicle. 1. Fuel Economy (MPG, l/100 km) The Fuel Economy mode shows the current and average fuel consumption. Current fuel consumption: The current fuel consumption mode shows the current fuel consumption by a moving bar graph.
3. Driving Distance (miles or km) The Driving Distance mode shows the distance driven since the last reset. The driving distance can be reset by pushing and holding the switch * A for less than 3 seconds. 4. Elapsed Time The Elapsed Time mode shows the time since the last reset.
2-24 Instruments and controls Maintenance: The maintenance intervals of the following items can be set or reset for the reminders. . Service Select this submenu to set or reset the distance for service due. . Tire Select this submenu to set or reset the distance for replacing tires.
prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Always secure your vehicle even if parking for a brief period. Never leave your keys in the vehicle, and always lock it when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.
2-26 Instruments and controls alarm will activate.) How to stop an activated alarm The alarm will stop by unlocking a door by pushing the unlock button on the key fob, or using the key. The alarm will not stop if the ignition switch is turned to the ACC or ON position.
service as soon as possible. Please bring all registered keys that you have when visiting a NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident.
2-28 Instruments and controls SIC2821 The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 Intermittent — intermittent operation can be adjusted by turning the knob toward * A (Slower) or * B (Faster) .
SIC3480 The rear window wiper and washer operate when the ignition switch is in the ON position. T urn the switch clockwise from the OFF position to operate the wiper. * 1 Intermittent (INT) — intermittent operation (not adjustable) * 2 Low (ON) — continuous low speed operation Push the switch forward * 3 to operate the washer.
2-30 Instruments and controls SIC3484 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam.
SIC3404 T o sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. T ampering with the supplemental front air bag system may result in serious personal injury.
2-32 Instruments and controls The power outlet is located in the instrument panel and the center console. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw.
SIC3494 Front The flap * A will be folded down when inserting a large container. T o remove the inner tray for cleaning, pull it up as illustrated * 1 . SIC3495 Rear T o open the cup holder, pull the lid. SIC3496 SUNGLASSES HOLDER WARNING Keep the sunglasses holder closed while driving to prevent an accident.
2-34 Instruments and controls . Do not leave glasses in the sun- glasses holder while parking in direct sunlight. The heat may da- mage the glasses. SIC3497 SIC3498 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
SIC3499 CONSOLE BOX T o open the console boxes, push up the knob * A and pull up the lid. T o close, push the lid down until latched. T o remove the inner box (if so equipped) for cleaning or storing a large object, pull it up as illustrated * B . The inside of the console box lid is designed to be used as a card holder * C and pen holders * D .
2-36 Instruments and controls SIC4267 LUGGAGE SIDE BOX T o open the luggage side box, pull up the strap. SIC3503 CARGO COVER (if so equipped) The cargo cover keeps the contents in the cargo area hidden from the outside. T o use the cargo cover, pull it out and hang both sides on the hooks * 1 .
cover is not removed, it may da- mage the top tether strap during a collision. Y our child could be ser- iously injured or killed in a collision if the child restraint top tether strap is damaged. . Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor.
2-38 Instruments and controls SIC4550 COA T HOOKS The coat hooks are equipped above the rear window. CAUTION Do not apply a total load of more than 2 lb (1 kg) to a single hook. SIC3506 UTILITY HOOK T o use the utility hook on the seatback, pull it. CAUTION .
WARNING . Drive extra carefully when the vehi- cle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. . Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sud- den or unusual handling maneuvers.
2-40 Instruments and controls SIC3507 1. Window lock button 2. Driver side window 3. Rear left passenger side window 4. Front passenger side window 5. Rear right passenger side window Main power window switch (driver’s side) T o open or close the window, push down * A or pull up * B the switch and hold it.
SIC3509 Automatic operation (if so equipped) The automatic operation is available for the switch that has an mark on its surface. T o fully open or close the window , push down or pull up the switch to the second detent and release it; the switch need not be held.
2-42 Instruments and controls CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. MAP LIGHTS Push the light lens to turn the map light on or off. SIC3512 The map light control switch has three positions: ON * 1 , DOOR * 2 and OFF * 3 .
OFF position When the switch is in the OFF position * 3 , the map lights will not illuminate, regardless of the condition. SIC3513 CEILING LIGHT The ceiling light switch has three positions: ON, DOOR and OFF . ON position When the switch is in the ON position * 1 , the ceiling light will illuminate.
2-44 Instruments and controls SIC2064 The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. When the cover is closed, the light will turn off. The lights will turn off after a period of time when the lights remain illuminated to prevent the battery from becoming dis- charged.
3 Pre-driving checks and adjustments Keys .............................................................................................. 3-2 NISSAN V ehicle Immobilizer System keys ................... 3-2 Doors ........................................
3-2 Pre-driving checks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number.
WARNING . Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.
3-4 Pre-driving checks and adjustments SP A2300 L OCKING WITH POWER DOOR L OCK SWIT CH Operating the power door lock switch will lock or unlock all the doors.
SP A2037 CHILD SAFETY REAR DOOR L OCK Child safety rear door locks help prevent the rear doors from being opened accidentally, espe- cially when small children are in the vehicle. When the levers are in the lock position * 1 , the rear doors can be opened only from the outside.
3-6 Pre-driving checks and adjustments NISSAN dealer. For information regarding the replacement of a battery, see “Battery replacement” (P .8-22) . JVP0275X * 1 L OCK button * 2 UNL OCK button * 3 P ANIC button * 4 Battery indicator light HOW T O USE REMO TE KEYLESS ENTR Y SY STEM Locking doors 1.
Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button * 3 on the key fob for more than 1 second. 2. The theft warning alarm and headlights will stay on for 25 seconds.
3-8 Pre-driving checks and adjustments Mode (Pushing the or button) DOOR LOCK DOOR UNLOCK Hazard indicator and horn mode HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicator mode HAZA.
WARNING . Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident. . If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
3-10 Pre-driving checks and adjustments WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. . Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle.
SP A2415 OPENING THE FUEL -FILLER DOOR T o open the fuel-filler door, pull the left side of the door. SP A2338 FUEL -FILLER CAP T o remove the fuel-filler cap: 1. T urn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder * A while refueling.
3-12 Pre-driving checks and adjustments . Do not fill a portable fuel container in the vehicle or trailer. Static elec- tricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer.
WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. SP A2383 TIL T OPERA TION Pull the lock lever down * 1 and adjust the steering wheel up or down * 2 to the desired position. Push the lock lever up * 3 securely to lock the steering wheel in place.
3-14 Pre-driving checks and adjustments SP A2447 INSIDE MIRROR Adjust the height and the angle of the inside mirror to the desired position. SP A2143 Manual anti-glare type The night position * 1 will reduce glare from the headlights of vehicles behind you at night.
Adjusting outside mirrors The outside mirror control switch is located on the left side of the instrument panel. The outside mirror will operate only when the ignition switch is in the ACC or ON position. T urn the switch right or left to select the right or left side mirror, then adjust using the control switch.
3-16 Pre-driving checks and adjustments MEMO I n f o r m a t i o n P r o v i d e d b y :.
4 Heater, air conditioner, audio, phone and voice recognition systems Safety note .................................................................................. 4-2 RearView Monitor (if so equipped) ...................................... 4-2 How to read the displayed lines .
4-2 Heater, air conditioner, audio, phone and voice recognition systems WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound.
may malfunction or cause damage resulting in a fire or an electric shock. CAUTION Do not scratch the camera lens when cleaning dirt or snow from the lens. SAA2776 HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the bumper line * A are displayed on the monitor.
4-4 Heater, air conditioner, audio, phone and voice recognition systems SAA1978 Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance.
the hill is viewed in the monitor closer than it appears. SAA3440 Backing up near a projecting object The vehicle may seem to nearly clear the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course.
4-6 Heater, air conditioner, audio, phone and voice recognition systems course. JVH0642X HOW T O ADJUST THE SCREEN T o set up the RearView Monitor to your preferred settings, push the ENTER/SETTING button * 2 while the RearView Monitor screen is displayed.
display object clearly. Clean the camera. . Do not use alcohol, benzine or thinner to clean the camera. This will cause discolora- tion. T o clean the camera, wipe with a cloth dampened with diluted mild cleaning agent and then wipe with a dry cloth. .
4-8 Heater, air conditioner, audio, phone and voice recognition systems WARNING . The air conditioner cooling function operates only when the engine is running. . Do not leave children or adults who would normally require the support of others alone in your vehicle.
SAA1776 1. Fan speed control dial 2. T emperature control dial 3. Air flow control dial 4. Air recirculation button 5. A/C (Air Conditioner) button 6. Rear window defroster button (See “Rear window defroster switch” (P .
4-10 Heater, air conditioner, audio, phone and voice recognition systems T emperature control: T urn the temperature control dial to set the desired temperature. T urn the dial between the middle and the right position to select the hot temperature. T urn the dial between the middle and the left position to select the cool tempera- ture.
Air conditioner operation The air conditioner system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the air conditioner system due to the lack of lubrication. Cooling: This mode is used to cool and dehumidify the air.
4-12 Heater, air conditioner, audio, phone and voice recognition systems WARNING The system contains refrigerant under high pressure. To avoid personal injury, any air conditioner service should be done only by an experienced technician with the proper equipment.
SAA0306 FM radio reception: Range: FM range is normally limited to 25 to 30 miles (40 to 48 km) , with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km) .
4-14 Heater, air conditioner, audio, phone and voice recognition systems SAA0480 Compact Disc (CD) player . Do not force a compact disc into the CD insert slot. This could damage the CD and/ or CD player. . During cold weather or rainy days, the player may malfunction due to the humidity .
. If the iPod automatically selects large video podcast files while in the shuffle mode, the vehicle display may momentarily black out, but it will soon recover. . Improperly plugging in the iP od may cause a checkmark to be displayed on and off (flickering) .
4-16 Heater, air conditioner, audio, phone and voice recognition systems may damage the port. Make sure that the USB device is connected correctly into the USB port. . Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
. Bit rate — Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file.
4-18 Heater, air conditioner, audio, phone and voice recognition systems Specification chart (for FM-AM Radio with Compact Disc (CD) player) : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
Specification chart (for FM-AM-SA T Radio with Compact Disc (CD) Player) : Supported media CD, CD-R, CD-RW , USB2.0 Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
4-20 Heater, air conditioner, audio, phone and voice recognition systems T roubleshooting guide (for FM-AM Radio with Compact Disc (CD) player) : Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty.
T roubleshooting guide (for FM-AM-SA T Radio with Compact Disc (CD) player) : Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly.
4-22 Heater, air conditioner, audio, phone and voice recognition systems JVH1113X 1. MUTE button 2. DISP (display)/TEXT button 3. FM·AM radio band select button 4. CD button 5. Station preset buttons 6. iPod button 7. AUX (auxiliary) button 8. Audio display 9.
setting. AUDIO button: Push the AUDIO button to change the selecting mode as follows. Push the TUNE ( , ) or SEEK ( , ) button to adjust Bass and T reble to the desired level.
4-24 Heater, air conditioner, audio, phone and voice recognition systems 1. Choose the radio band using the radio band select button. 2. T une to the desired station using the SEEK, SCAN or TUNE button. 3. Push and hold the desired radio station preset button to until a beep sound is heard.
CD: CD with MP3 or WMA: FF (Fast Forward) , REW (Re- wind) : CD: When the or button is pushed while the CD is being played, the CD will play while fast forwarding or rewinding. When the button is released, the CD will return to normal play speed. CD with MP3 or WMA: When the or button is pushed for less than 1.
4-26 Heater, air conditioner, audio, phone and voice recognition systems Interface system for iP od operation WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury.
controls. T o disconnect the cable from the vehicle outlet, fully depress the center connector button to unlatch the connector and pull the connector straight out of the outlet. T o disconnect the cable from the iPod , fully depress the side connector buttons and pull the iPod connector straight out of the iPod .
4-28 Heater, air conditioner, audio, phone and voice recognition systems iPod play information: When the DISP/TEXT button is pushed while a program is being played, the program informa- tion display will change as follows: * Artist Name will not be displayed for a Podcast.
JVH0160X 1. FM·AM band select button 2. CD EJECT button 3. XM band select button 4. DISP (display) button 5. Color display 6. iPod MENU button 7. Radio CA T (category)/REW (rewind) button for SEEK/TRACK 8. Radio SCAN tuning button 9. Radio CA T (category)/FF (fast forward) button for SEEK/TRACK 10.
4-30 Heater, air conditioner, audio, phone and voice recognition systems Audio main operation Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback.
gle between ON and OFF using the TUNE·SCROLL control knob. . RDS Display When this has been set to ON, RDS (radio data system) information will be shown on the display . Select RDS Display and then push the ENTER/SETTING button. Y ou can toggle between ON and OFF using the TUNE·SCROLL control knob.
4-32 Heater, air conditioner, audio, phone and voice recognition systems If the radio SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station/channel.
RANDOM (RDM) : When the RDM play button is pushed while a CD is being played, the play pattern can be changed as follows: (CD) Normal 1 Disc Random (CD with compressed audio files) Normal ? 1 Disc Random ? 1 Folder Random ? Normal CD EJECT: When the CD EJECT button is pushed with the CD loaded, the CD will be ejected.
4-34 Heater, air conditioner, audio, phone and voice recognition systems SAA3434 Audio main operation: The USB connection port is located in the center console. Open the lid and connect a USB memory as illustrated. Then, switch to the USB memory mode automatically.
CAUTION . Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make sure that the USB device is connected correctly into the USB port. . Do not grab the USB port cover (if so equipped) when pulling the USB device out of the port.
4-36 Heater, air conditioner, audio, phone and voice recognition systems Make sure that the iPod firmware is updated. Audio main operation: Place the ignition switch to the ACC or ON position. Then, push the CD·AUX button repeat- edly to switch to the iPod mode.
SAA0451 CD/DVD/USB MEMORY CARE AND CLEANING CD/DVD . Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc. . Always place the discs in the storage case when they are not being used. . T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth.
4-38 Heater, air conditioner, audio, phone and voice recognition systems VOLUME control switch Push up or down the VOLUME control switch to increase or decrease the volume. T uning switch Memory change (radio) : Push up or down the tuning switch for less than 1.
— The vehicle enters a garage with a low ceiling. — The vehicle is covered with a car cover. . Always properly tighten the antenna rod during installation.
4-40 Heater, air conditioner, audio, phone and voice recognition systems WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
battery power of the cellular phone may discharge quicker than usual. The Blue- tooth Hands-Free Phone System cannot charge cellular phones. . If the Bluetooth Hands-Free Phone System seems to be malfunctioning, see “T rouble- shooting guide” later in this section.
4-42 Heater, air conditioner, audio, phone and voice recognition systems Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the follow- ing: . Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.
Example: 1-800-662-6200 — “One eight zero zero” The system repeats the numbers and prompts you to enter more. — “six six two” The system repeats the numbers and prompts you to enter more. — “six two zero zero” . Y ou can say “Star” for “*” and “P ound” for “#” at any time in any position of the phone number.
4-44 Heater, air conditioner, audio, phone and voice recognition systems GETTING ST ARTED The following procedures will help you get started using the Bluetooth Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to “List of voice commands” (P .
prompts you for a name again. Making a call by entering a phone number 1. Push the button on steering wheel. A tone will sound. 2. Say: “Call” * A . The system acknowledges the command and announces the next set of available commands. 3. Say: “Phone Number” * B .
4-46 Heater, air conditioner, audio, phone and voice recognition systems Call (speak name) * A If there are entries stored in the phonebook, a number associated with a name and location can be dialed. See “Phonebook (phones without automatic phonebook download function)” (P .
. “Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice. NOTE: If a call is ended or the cellular phone network connection is lost while the Mute feature is on, the Mute feature will be reset to “off” for the next call so the other party can hear your voice.
4-48 Heater, air conditioner, audio, phone and voice recognition systems the phonebook (PBAP Bluetooth profile) , the “Phonebook” command is used to manage entries to the vehicle phonebook. Y ou can say the name of an entry at this menu to initiate dialing of that entry.
Connect Phone NOTE: Add Phone command is not available when the vehicle is moving. Use the Connect Phone commands to manage the phones connecting to the vehicle or to enable the Bluetooth function on the vehicle. “Add Phone” * A Use the Add Phone command to add a phone to the vehicle.
4-50 Heater, air conditioner, audio, phone and voice recognition systems 10. The system will announce that speaker adaptation has been completed and the system is ready. The SA mode will stop if: . The button is pushed for more than 5 seconds in SA mode.
TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
4-52 Heater, air conditioner, audio, phone and voice recognition systems MEMO I n f o r m a t i o n P r o v i d e d b y :.
5 Starting and driving Precautions when starting and driving ................................ 5-2 Exhaust gas (carbon monoxide) ...................................... 5-2 Three-way catalyst .............................................................
5-2 Starting and driving WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle.
system, underbody, or rear of the vehicle. THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants.
5-4 Starting and driving mately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indi- cator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
function and the low tire pressure warning light will flash for approxi- mately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/ or system resetting. . Replacing tires with those not ori- ginally specified by NISSAN could affect the proper operation of the TPMS.
5-6 Starting and driving significantly more likely to be injured or killed than a person properly wearing a seat belt. ON-P AVEMENT AND OFF-RO AD DRIVING PRECAUTION S Utility vehicles have a significantly higher rollover rate than other types of vehicles.
may cause a collision and result in personal injury. . The vehicle generally moves or pulls in the direction of the flat tire. . Do not rapidly apply the brakes. . Do not rapidly release the accelera- tor pedal. . Do not rapidly turn the steering wheel.
5-8 Starting and driving backward. . Many hills are too steep for any vehicle. If you drive up them, you may stall. If you drive down them, you may not be able to control your speed. If you drive across them, you may roll over. . Do not shift ranges while driving on downhill grades as this could cause loss of control of the vehicle.
equipment may result in drivetrain damage or unexpected vehicle movement which could result in serious vehicle damage or personal injury. . When a wheel is off the ground due to an unlevel surface, do not spin the wheel excessively. (AWD mod- els) . Accelerating quickly, sharp steering maneuvers or sudden braking may cause loss of control.
5-10 Starting and driving When the ignition switch cannot be turned to the L OCK position: 1. Move the shift lever to the P (Park) position. 2. T urn the ignition switch slightly in the ON direction. 3. T urn the ignition switch to the L OCK position.
1. Apply the parking brake. 2. Move the shift lever to the P (Park) or N (Neutral) position. (P is recommended.) The starter is designed so that it does not operate unless the shift lever is in either of the above positions. 3. Crank the engine with your foot off the accelerator pedal by turning the ignition switch to ST ART.
5-12 Starting and driving CONTINUOUSL Y V ARIABLE TRANS- MISSION (CVT) The Continuously V ariable T ransmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages.
SSD0665 T o move the shift lever, : Push the button * A while depressing the brake pedal. : Push the button. : Just move the shift lever. Shifting After starting the engine, fully depress the brake pedal, push the shift lever button and move the shift lever from the P (Park) position to any of the desired shift positions.
5-14 Starting and driving may shift to N (Neutral) and restart a stalled engine while the vehicle is moving. D (Drive) : Use this position for all normal forward driving. L (Low) : Use this position for maximum engine braking on steep downhill gradients/climbing steep slopes and whenever approaching sharp bends.
JVS0097X Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the indicator light in the instrument panel illuminates. Use the overdrive off mode when you need improved engine braking. T o turn off the overdrive off mode, push the O/D OFF switch again.
5-16 Starting and driving SSD0667 Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed. T o move the shift lever, release the shift lock.
SP A2331 T o apply: Fully depress the parking brake pedal * 1 . T o release: 1. Firmly apply the foot brake * 2 . 2. Depress the parking brake pedal * 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out.
5-18 Starting and driving SSD0668 1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. MAIN (ON·OFF) switch CRUISE CONTROL OPERA TIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal.
CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to ob- tain maximum engine performance and ensure the future reliability and econo- my of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.
5-20 Starting and driving fuel and reduces emissions. 8. Buy an automated pass for toll roads. . Automated passes permit drivers to use special lanes to maintain cruising speed through the toll and avoid stopping and starting. 9. Winter warm up. . Limit idling time to minimize impact to fuel economy.
SSD0418 ALL -WHEEL DRIVE (AWD) L OCK SWIT CH OPERA TIONS The AWD L OCK switch located on the lower side of the instrument panel. This switch is used to select the AUT O or L OCK mode depending on the driving conditions. Each time you push the lower part of the switch * A , the A WD mode will switch: AUT O ? LOCK ? AUT O.
5-22 Starting and driving ning. . Engine idling speed is high while warming up the engine. Be espe- cially careful when starting or driv- ing on slippery surfaces. . When turning the vehicle in LOCK mode on paved roads, you may feel a braking effect. This is a normal condition of the AWD model.
checked by a NISSAN dealer as soon as possible. . The powertrain may be damaged if you continue driving with the warn- ing light blinking rapidly. . Never drive on dry hard surface roads in the LOCK mode, as this will overload the powertrain and may cause a serious malfunction.
5-24 Starting and driving 3. T o help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated. . HEADED DOWNHILL WITH CURB: * 1 T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb.
BRAKING PRECAUTION S The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. Y ou may feel a small click and hear a sound when the brake pedal is fully depressed slowly . This is not a malfunction and indicates that the brake assist mechanism is operating properly.
5-26 Starting and driving for safety. . Tire type and condition may also affect braking effectiveness. — When replacing tires, install the specified size of tires on all four wheels. — When installing a spare tire, make sure that it is the proper size and type as specified on the Tire and Loading Information label.
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving con- ditions, the VDC system helps to perform the following functions. . Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.
5-28 Starting and driving . If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extre- mely deteriorated, the VDC system may not operate properly and the VDC warning light may illumi- nate.
TIRE EQUIPMENT SUMMER tires have a tread designed to provide superior performance on dry pavement. How- ever, the performance of these tires will be substantially reduced in snowy and icy condi- tions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON tires on all four wheels.
5-30 Starting and driving MEMO I n f o r m a t i o n P r o v i d e d b y :.
6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Flat tire ......................................................................................... 6-2 Tire Pressure Monitoring System (TPMS) ....
6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road.
failure. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pres- sure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF .
6-4 In case of emergency MCE0001A Blocking wheels Place suitable blocks * 1 at both the front and back of the wheel diagonally opposite the flat tire to prevent the vehicle from moving when it is jacked up. WARNING Be sure to block the wheel as the vehicle may move and result in personal injury.
SCE0859 5. Remove the luggage floor box (T ype A or B) by turning the clips counterclockwise. SCE0699 Jacking tools 6. Remove the jacking tools and the spare tire.
6-6 In case of emergency SCE0630 Removing wheel cover (if so equipped) WARNING Never use your hands to remove the wheel cover. This may cause personal injury. T o remove the wheel cover, use the jack rod * 1 as illustrated. Apply cloth * 2 between the wheel and jack rod to prevent damaging the wheel and wheel cover.
SCE0572 Jack-up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of the jack head between the notches as shown.
6-8 In case of emergency SCE0039 Installing the spare tire The spare tire is designed for emergency use. (See specific instructions under the heading “ Wheels and tires” (P.8-29) .) 1. Clean any mud or dirt from the surface between the wheel and hub.
accident or sudden stop. . The T -type spare tire and small size spare tire are designed for emer- gency use. See specific instructions under the heading “ Wheels and tires” (P .8-29) . T o start your engine with a booster battery, the instructions and precautions below must be followed.
6-10 In case of emergency SCE0707 WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle * B , position the two vehicles ( * A and * B ) to bring their batteries into close proximity to each other.
Do not attempt to start the engine by pushing. CAUTION Continuously V ariable Transmission (CVT) models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. CAUTION . Do not continue to drive if your vehicle overheats.
6-12 In case of emergency cooling fan can start at any time. 6. After the engine cools down, check the coolant level in the reservoir tank with the engine running. Add coolant to the reservoir tank if necessary. Have your vehicle repaired at a NISSAN dealer.
SCE0439 All-Wheel Drive (AWD) models T OWING RECOMMENDED B Y NISSAN All-Wheel Drive (A WD) models NISSAN recommends that towing dollies be used when towing your vehicle or place the vehicle on a flatbed truck as illustrated.
6-14 In case of emergency SCE0438 T wo-Wheel Drive (2WD) models T wo-Wheel Drive (2WD) models NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION .
SCE0701 Front Pulling a stuck vehicle Do not use the tie down hooks for towing or vehicle recovery. Front : Securely install the recovery hook * 1 (stored in the luggage room) as illustrated. Make sure that the hook is properly secured in the original place after use.
6-16 In case of emergency . Apply the accelerator as little as possible to maintain the rocking motion. . Release the accelerator pedal before shifting between R and D. . Do not spin the tires above 35 MPH (55 km/h) . 5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle.
7 Appearance and care Cleaning exterior ....................................................................... 7-2 Washing ................................................................................. 7-2 Waxing ..................................
7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
finish or leave swirl marks. REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory stores.
7-4 Appearance and care TIRE DRESSING NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a com- pound.
may damage the lens cover. AIR FRESHENERS Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: . Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces.
7-6 Appearance and care SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belts” (P .1-9) . WARNING Do not allow wet seat belts to roll up in the retractor.
Remove dirt with a vacuum cleaner. . Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them.
7-8 Appearance and care MEMO I n f o r m a t i o n P r o v i d e d b y :.
8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ..................................
8-2 Maintenance and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle’s fine mechan- ical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts.
8-4 Maintenance and do-it-yourself Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washer operate properly and that the wipers do not streak.
When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
8-6 Maintenance and do-it-yourself affect warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. SDI2127 QR25DE ENGINE 1. Engine oil filler cap 2. Brake fluid reservoir 3. Air cleaner 4. Engine coolant reservoir 5.
SDI2128 Removing the air duct Remove the air duct * A if necessary. 1. Remove the clips * B with a suitable tool. 2. Pull the air duct upward * 1 and then sideways * 2 . Install the air duct securely after any inspection or maintenance work is performed.
8-8 Maintenance and do-it-yourself . The life expectancy of the factory-fill coolant is 105,000 miles (168,000 km) or 7 years. Mixing any other type of coolant other than Genuine NISSAN Long Life Anti.
SDI2129 CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
8-10 Maintenance and do-it-yourself JVM0153X Engine oil and filter 1. Place a large drain pan under the drain plug * A . 2. Remove the oil filler cap * B . 3. Remove the drain plug with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot.
After the operation 1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. . T ry to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
8-12 Maintenance and do-it-yourself SDI2130 Check the fluid level in the reservoir. If the fluid is below the MIN line * 1 or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 fluid up to the MAX line * 2 .
. Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. . Make certain the terminal connections are clean and securely tightened. . If the vehicle is not to be used for 30 days or longer, disconnect the negative ( í ) battery terminal cable to prevent discharging it.
8-14 Maintenance and do-it-yourself SDI1480C 1. Remove the cell plugs * A . 2. Add distilled water up to the UPPER LEVEL * 1 line. If the side of the battery is not clear, check the distilled water level by looking directly above the cell; the condition * 1 indicates OK and the conditions * 2 needs more to be added.
the belt is in poor condition or loose, have it replaced or adjusted by a NISSAN dealer. 2. Have the belts checked regularly for condi- tion. WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs.
8-16 Maintenance and do-it-yourself SDI2106 Push the tabs * 1 and pull out the filter element * 2 . The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Main- tenance Guide” .
CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
8-18 Maintenance and do-it-yourself JVM0501X Be careful not to clog the washer nozzle * A . This may cause improper windshield washer operation. If the nozzle is clogged, remove any objects with a needle or small pin * B .B e careful not to damage the nozzle.
light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For additional information, see the maintenance log section of your “NISSAN Service and Maintenance Guide” .
8-20 Maintenance and do-it-yourself SDI1753 6. If the fuse is open * A , replace it with a new fuse * B . 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If any electrical equipment does not operate and fuses are in good condition, check the fusible links.
SDI1753 4. If the fuse is open * A , replace it with a new fuse * B . 5. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. JVM0089X Extended storage fuse switch (if so equipped) T o reduce battery drain, the extended storage fuse switch comes from the factory switched off.
8-22 Maintenance and do-it-yourself CAUTION Be careful not to allow children to swallow the battery and removed parts. SDI2134 KEY FOB Replace the battery in the key fob as follows: 1. Remove the screw. 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part.
authority to operate the equipment. Maintenance and do-it-yourself 8-23 I n f o r m a t i o n P r o v i d e d b y :.
8-24 Maintenance and do-it-yourself JVM0520X 1. Headlight (high-beam) 2. Front turn signal/parking/side marker light 3. Front map light 4. Ceiling light 5. Headlight (low-beam) 6. High-mounted stop light 7. Cargo light 8. License plate light 9. Back-up light 10.
entering the headlight body may affect bulb performance. . High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. . Only touch the plastic base when handling the bulb.
8-26 Maintenance and do-it-yourself EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Front turn signal/parking/side marker light 27/8 S25 Rear combination light back-up 18 W16W turn signal 21 W2.
SDI2141 Front turn signal/parking/side marker light Remove the bulb as illustrated. SDI2138 Rear combination light (stop/tail/side marker/turn) Open the lift gate to remove the rear combina- tion light assembly. * A : Clip SDI2139 Back-up light Open the lift gate to remove the back -up light assembly.
8-28 Maintenance and do-it-yourself SDI2140 License plate light The license plate light bulb can be accessed by removing the cover on the inside of the lift gate.
If you have a flat tire, see “Flat tire” (P .6-2) . TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) .
8-30 Maintenance and do-it-yourself SDI2340 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “V ehicle load- ing information” (P .9-12) . * 3 Original size: The size of the tires originally installed on the vehicle at the factory .
SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
8-32 Maintenance and do-it-yourself SDI1606 Example * 1 Tire size (example: P215/60R16 94H) 1. P: The “P” indicates the tire is designed for passenger vehicles. (Not all tires have this information.) 2. Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge.
5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. * 3 Tire ply composition and material The number of layers or plies of rubber-coated fabric in the tire.
8-34 Maintenance and do-it-yourself All season tires NISSAN specifies all season tires on some models to provide good performance all year, including snowy and icy road conditions. All Season tires are identified by ALL SEASON and/or M&S (Mud and Snow) on the tire sidewall.
The tire chain part numbers and Peerless Chain Company phone number are correct at the time of printing that is shown on the back cover of this Owner’s Manual.
8-36 Maintenance and do-it-yourself tightened to the specification at each tire rotation interval. WARNING . After rotating the tires, check and adjust the tire pressure. . Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc .
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. (See “Specifications” (P .
8-38 Maintenance and do-it-yourself Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be per- formed with the wheels off the vehicle.
reduced. To avoid damage to the vehicle, do not drive over obstacles. Also do not drive the vehicle through an automatic car wash since it may get caught.
8-40 Maintenance and do-it-yourself MEMO I n f o r m a t i o n P r o v i d e d b y :.
9 T echnical and consumer information Capacities and recommended fluids/lubricants ................ 9-2 Fuel information ................................................................... 9-3 Engine oil and oil filter recommendation .................
9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity.
FUEL INFORMA TION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control system, and may also affect warranty coverage.
9-4 T echnical and consumer information blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles.
JVT0159X 1. API certification mark 2. API service symbol ENGINE OIL AND OIL FIL TER RE- COMMENDA TION Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure satisfactory engine life and performance, see “Capacities and recommended fluids/lubricants” (P .
9-6 T echnical and consumer information interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes. . repeated short distance driving at cold outside temperatures .
ENGINE Model QR25DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder, in-line Bore 6 Stroke in (mm) 3.5 6 3.9 (89.0 6 100.0) Displacement cu in (cm 3 ) 151.82 (2,488) Firing order 1-3-4-2 Idle speed rpm No adjustment is necessary. Ignition timing (B.
9-8 T echnical and consumer information DIMENSIONS AND WEIGHT S Overall length in (mm) 183.3 (4,655)*1 183.9 (4,670)*2 Overall width in (mm) 70.9 (1,800) Overall height in (mm) 65.3 (1,658) 66.3 (1,683)*3 Front tread in (mm) 60.6 (1,540) Rear tread in (mm) 61.
STI0553 VEHICLE IDENTIFICA TION NUMBER (chassis number) The vehicle identification number is located as shown. Remove the cover to access the number. SDI2121 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F .M.V.S.S. CERTIFICA TION LABEL The Federal Motor V ehicle Safety Standards (F .
9-10 T echnical and consumer information STI0554 EMISSION CONTROL INFORMA TION LABEL The emission control information label is at- tached to the underside of the hood as shown. STI0494 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated.
STI0599 Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . J-nut 6 2 . Screw 6 2 . Screw grommet 6 2 1. T emporarily place the license plate bracket by aligning the lower part * A of it with the lines * B on the bumper.
9-12 T echnical and consumer information the fascia. 8. Install the license plate bracket with screws. 9. Install the license plate with bolts that are no longer than 0.55 in (14 mm) . WARNING . It is extremely dangerous to ride in a cargo area inside the vehi- cle.
cargo load. This information is located on the Tire and Loading Information label. . Cargo capacity - permissible weight of cargo, the subtracted weight of occu- pants from the load limit.
9-14 T echnical and consumer information Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
securing cargo. WARNING . Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unse- cured cargo could cause personal injury. . The child restraint top tether strap may be damaged by contact with items in the cargo area.
9-16 T echnical and consumer information WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION . Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) .
outside temperatures on graded roads can affect engine performance and cause overheat- ing. The transmission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically decrease engine power.
9-18 T echnical and consumer information TI1012M MAXIMUM GROSS VEHICLE WEIGHT (GVW)/MAXIMUM GROSS AXLE WEIGHT (GAW) The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.
. Maximum T railer towing capacity from “T ow- ing Load/Specification” chart - 1,000 lb. (453 kg) . 4,233 lb. (1,920 kg) GVWR í 4,133 lb. (1,874 kg) GVW = 100 lb. (45 kg) Available for tongue weight 5,136 lb. (2,329 kg) GCWR í 4,133 lb. (1,874 kg) GVW = 1,003 lb.
9-20 T echnical and consumer information T OWING L OAD/SPECIFICA TION T OWING LOAD/SPECIFICA TION CHART Unit: lb (kg) MAXIMUM TRAILER WEIGHT*1 1,000 (453) MAXIMUM TONGUE L OAD 150 (68) GROSS COMBINED .
Sway control device Sudden maneuvers, wind gusts and buffeting caused by other vehicles can affect trailer handling. Sway control devices may be used to help control these affects.
9-22 T echnical and consumer information T railer brakes If your trailer is equipped with a braking system, make sure it conforms to federal and/or local regulations and that it is properly installed. WARNING Never connect a trailer brake system directly to the vehicle brake system.
6. T urn off the engine. T o drive away: 1. Apply and hold the brake pedal. 2. Start the engine. 3. Shift the transmission into gear. 4. Release the parking brake. 5. Drive slowly until the vehicle and trailer are clear from the blocks. 6. Apply and hold the brake pedal.
9-24 T echnical and consumer information . Check your hitch, trailer wiring harness connections, and trailer wheel lug nuts after 50 miles (80 km) of travel and at every break. . When stopped in traffic for long periods of time in hot weather, put the vehicle in the P (Park) position.
DO T (Department Of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
9-26 T echnical and consumer information Y our NISSAN is covered by the following emission warranties. . Emission Defects Warranty . Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your W arranty In- formation Booklet which comes with your NISSAN.
the I/M test, check the vehicle’s inspection/ maintenance test readiness condition. Place the ignition switch in the ON position without starting the engine. If the Malfunction Indicator Light (MIL) comes on steady for 20 seconds and then blinks for 10 seconds, the I/M test condition is “not ready”.
9-28 T echnical and consumer information Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory trained technicians working at NISSAN dealerships.
MEMO T echnical and consumer information 9-29 I n f o r m a t i o n P r o v i d e d b y :.
9-30 T echnical and consumer information MEMO I n f o r m a t i o n P r o v i d e d b y :.
10 Index A ABS (Anti-lock Braking System) ............................ 5-25 Advanced air bag system ......................................... 1-47 Air bag system Advanced air bag system .................................. 1-47 Front passenger air bag and status light .
10-2 Drive belts .................................................................... 8-14 Driving All-wheel drive (A WD) ....................................... 5-20 Cold weather driving .......................................... 5-28 Distance (miles or km) .
I Ignition switch ............................................................... 5-9 Key positions ................................................. ....... 5-10 Immobilizer system ..................................................... 2-26 Indicator lights .
10-4 Operation, Indicators for operation ........................ 2-19 Outside air temperature ............................................ 2-17 Outside mirrors ................................................. .......... 3-14 Overdrive OFF switch ...
Starting the engine ............................................. 5-11 Status light, Front passenger air bag .................... 1-48 Steering Electric power steering system ....................... 5-24 Steering wheel switch for audio controls ..... 4-37 Tilting steering wheel .
10-6 Warning light Air bag warning light ............................... 1-54, 2-14 All-wheel drive (A WD) warning light .............. 2-10 Anti-lock braking system (ABS) warning light ...................................................... ... 2-10 AWD warning light .
MEMO 10-7 I n f o r m a t i o n P r o v i d e d b y :.
MEMO I n f o r m a t i o n P r o v i d e d b y :.
MEMO I n f o r m a t i o n P r o v i d e d b y :.
FUEL INFORMA TION: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control systems, and may also affect warranty coverage.
S35-D Printing : October 2014 (43) Publication No.: OM0E 0L32U2 Printed in U .S.A. T00U M-J M06D OM15E0 0S35U0 I n f o r m a t i o n P r o v i d e d b y :.
Een belangrijk punt na aankoop van elk apparaat Nissan Rogue Select (2015) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan Rogue Select (2015) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan Rogue Select (2015) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan Rogue Select (2015) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan Rogue Select (2015) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan Rogue Select (2015) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan Rogue Select (2015) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan Rogue Select (2015) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
