Gebruiksaanwijzing /service van het product 150T van de fabrikant Nokia
Ga naar pagina of 33
User Guide.
.
GB 3 Quick Guide Connecting a TV and a video recorder Preparing the Remote Control Language • Select the desired menu language with cursor up / down. (Cursor = see page 9.) This will also be the default language for audio and subtitling. •P ress select again to confirm your language choice and to start searching for TV/radio channels.
GB 4 T ime adjustment Select cursor up/down to adjust the time in half-hour increments. T o adjust the minutes, select cursor left/right . • Press select to finish the installation and to open the Navi Bars.
GB 5 Contents Quick Guide 3 Switching on for the first time 3 Language 3 Channel search in progress 3 Ti me adjustment 4 End user license 6-7 Security information 8 Remote control 9 Front and rear pan.
GB 6 NOKIA MEDIAMASTER SOFTW ARE END-USER LICENSE IMPOR T ANT : READ CAREFULL Y BEFORE OR USING THE SOFTW ARE NOKIA CORPORATION, NOKIA HOME COMMUNICA TIONS END-USER SOFTW ARE AGREEMENT This Software A.
GB 7 NOKIA MEDIAMASTER SOFTW ARE END-USER LICENSE Nothing contained in this Agreement shall prejudice the statutory rights of any party dealing as a consumer .
GB 8 GENERAL INFORMATION ABOUT THE MEDIAMASTER Throughout this manual, you will notice that the everyday operation of your Mediamaster is based on a series of user -friendly , on-screen displays and menus.
GB 9 Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of standby mode. 0 - 9 Change channels and enter values in menus. Note: If 0 is entered as the first digit in viewing mode, the TV Release functionality is activated (see below).
GB 10 Front panel FRONT AND REAR PANEL Function ON Standby Locked to channel Remote control feedback SW download Error LED indicator 1 Green Red - - Continous green flashing Continous red flashing LED.
GB 11 The box for your Mediamaster should contain the following items: •t he Mediamaster •r emote control with 2 AAA batteries • SCART cable (fully connected; 1.
GB 12 CONNECTING THE MEDIAMASTER Note the following: • In some block of flats, the roof-mounted aerial system includes a filter and chan- nel selector . If so, the aerial will probably not work with the Mediamaster , in which case you should contact your landlord.
GB 13 CONNECTING THE MEDIAMASTER Connection of a video recorder • Connect a SCART cable from the main SCAR T socket on the TV to the TV SCART socket on the Mediamaster . • Connect an RF cable from the TV/VCR output on the Mediamaster to the RF input socket on the video.
GB 14 CONNECTING THE MEDIAMASTER This procedure is only necessary when your Mediamaster is connected to the TV with an RF lead and no SCAR T leads have been used. To tune your TV to the RF signal, it is possible that you will need both this manual and the manual for your TV .
GB 15 FIRST TIME INSTALLA TION General information Once your Mediamaster has been correctly connected, a “First time installation” must be performed.
GB 16 FIRST TIME INSTALLA TION Channel search in progress This menu will be shown while the Mediamaster is searching for TV and radio channels. All channels found will be listed on the screen. Note that the search procedure may take a few minutes. Y ou may cancel the search at any time by pressing select .
GB 17 NA VI BARS General information •P ress select to open the Navi Bars . Use the Navi Bars , which consist of a horizontal bar and a vertical bar , to select TV or radio channels and/or change system settings. The horizontal row contains folders named TV , Settings , etc.
GB 18 NA VI BARS Banner T ime-out When you switch channels, an information banner will be shown for a few seconds. Y ou can select how long the banner will be shown. V olume bar Select whether or not you want the volume bar to appear on the screen when you change the volume.
GB 19 Control folder ☛ Edit channels From these menus, you can create and edit favourite channel lists. Y ou can add, delete, rename and arrange the order of the channels within the favourite lists. The “TV” list might contain a lot of channels.
GB 20 • Enter the name as follows : Press the number corresponding to the character you want: once for the first character , twice for the second, etc.
GB 21 NA VI BARS Add/Delete channels From this menu, you can add and remove the channels in your favourite lists. The “TV” or “Radio” lists are used as a basis for where the channels are selected from. A channel is added or removed from the list by pressing info .
GB 22 NA VI BARS Contr ol folder ☛ T imer General Y ou can make the Mediamaster start and stop at a predefined time. The timer function is very useful when you want to record a programme and you cannot start/stop the recording event yourself, or when you just want to be re- minded of the start of a programme you do not want to miss.
GB 23 NA VI BARS Settings folder ☛ Channel This menu is used when you want to search for channels at a later time. T o open it, you will be asked to enter your access code. The access code is set to 1234 at the fac tory. A channel search procedure can be performed in three different ways: Automatic, Manual or Advanced manual search.
GB 24 NA VI BARS Settings folder ☛ T V To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the factory. From this menu, you can adjust the audio/video settings for your Mediamaster . TV screen format Select your TV screen format.
GB 25 NA VI BARS Settings folder ☛ Access To open this menu, you will be asked to enter your access code. The access code is set to 1234 at the f actory. The following settings can be altered from this menu. Access Control Select “Y es” or “No” to turn the access control in all menus on or off.
GB 26 NA VI BARS Settings folder ☛ Reinstall To open this menu, you must enter the access code. The access code has been set to 1234 at the f actory. NOTE: Use this option only if you must restart the installation procedure from the beginning as all of your previous settings, your access code, your favourite chan- nels, etc.
GB 27 VIEWING MODE Programme information Every time you change channels, you will receive programme information for a few seconds. (In the Control folder/User preferences’ menu, you can select how long this information will be shown.
GB 28 VIEWING MODE Extended programme information The Mediamaster can display information about programmes currently being broad- casted as well as those that will be broadcasted next. This procedure is the same for both TV and radio mode. By pressing info while watching TV , you will get the “Programme information” ban- ner .
GB 29 VIEWING MODE T eletext Pressing txt will open a teletext page, if teletext is transmitted. Select teletext pages with the numeric buttons on the remote control (Fig. 1). Y ou can also quickly go to the different page alternatives shown in any page by pressing cursor left / right .
GB 30 PCR Program Clock Reference. PID Packet Identifier . PIN code Personal Identification Number . A four-digit code stored in the smart card. For PPV (Pay Per View) or other services together with the subscription. RCA Coaxial connector used to connect the Mediamaster to an exter - nal amplifier .
GB 31 What to do Check that the mains cable is plugged into the power socket. Press the standby button to bring the Mediamaster out of standby mode. Change both batteries. Aim the remote control at the box. Remove anything that might be blocking the front panel.
GB 32 TECHNICAL SPECIFICA TIONS T ransmission Standar ds DVB, MPEG 2, OFDM RF input Modulator output In-/output connector IEC female / IEC male RF input frequency 174-300; 474-862 MHz RF input power l.
Nokia is a registered trademark of Nokia Corporation www .nokia.com 00000936.00.
Een belangrijk punt na aankoop van elk apparaat Nokia 150T (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nokia 150T heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nokia 150T vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nokia 150T leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nokia 150T krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nokia 150T bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nokia 150T kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nokia 150T . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.