Gebruiksaanwijzing /service van het product NN46200-310 van de fabrikant Nortel
Ga naar pagina of 52
Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply Release: 4.1 Document Revision: 01.01 www.nortel.com NN46200-310 (324629-A Rev 01) .
Nortel Ethernet Routing Switch 8300 Release: 4.1 Publication: NN46200-310 Document status: Standard Document release date: 9 June 2008 Copyright © 2008 Nortel Networks All Rights Reserved.
3 . Contents Regulatory information and safety precautions 5 European Union and European Free Trade Association (EFTA) notice 7 Safety messages 10 Notices 10 Software license 15 New in this Release 19.
4 Technical specifications 47 Technical specifications navigation 47 Model 8005DI DC power supply 47 DC input power specifications 47 DC output power specifications 47 Model 8005DC power supply 48 DC input power specifications 48 DC output power specifications 48 Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.
5 . Regulatory information and saf ety precautions International regulatory statements of conformity This is to certify that the Nortel Networks 8300 series chassis and components installed within the.
6 Regulatory information and safety precautions ICES statement (Canada only) Canadian Department of Communications Radio Interference Regulations This digital apparatus (8300 series chassis and instal.
National electromagnetic compliance (EMC) statements of compliance 7 EN 300386 statement The Ethernet Routing Switch 8300 series chassis complies with the requirements of EN 300386 V1.
8 Regulatory information and safety precautions MIC notice for 8310 and 8306 chassis (Republic of Korea only) This device has been approved for use in Business applications only per the Class A requirements of the Republic of Korea Ministry of Information and Communications (MIC).
National safety statements of compliance 9 Exporter: Nortel Networks, Inc. 4655 Great America Parkway Santa Clara CA 95054 USA Importer: Nortel Networks de México, S.A. de C.V. Avenida Insurgentes Sur #1605 Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.
10 Regulatory information and safety precautions Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.F. 03900 Tel: 52 5 480 2100 Fax: 52 5 480 2199 Embarcar a: Model 8005DC: -48 V.
Safety messages 11 Attention notice ATTENTION An attention notice provides important information regarding the installation and operation of Nortel products. Caution ESD notice CAUTION ESD ESD notices provide information about how to avoid discharge of static electricity and subsequent damage to Nortel products.
12 Regulatory information and safety precautions CAUTION ATTENTION La mention Attention fournit des informations sur les moyens de prévenir une perturbation possible du service et d’éviter d’endommager les produits Nortel.
Safety messages 13 WARNING ADVERTENCIA Los avisos de Advertencia brindan información acerca de cómo prevenir las lesiones a personas al trabajar con productos Nortel. WARNING AVISO Os avisos oferecem informações sobre como evitar ferimentos ao trabalhar com os produtos da Nortel.
14 Regulatory information and safety precautions DANGER PERICOLO Le indicazioni Pericolo—Alta tensione forniscono informazioni per evitare situazioni o condizioni che potrebbero causare gravi danni alle persone o il decesso a causa dell’alta tensione o di scosse elettriche.
15 . Software license This section contains the Nortel Networks software license. Nortel Networks Inc. software license agreement This Software License Agreement ("License Agreement") is between you, the end-user ("Customer") and Nortel Networks Corporation and its subsidiaries and affiliates ("Nortel Networks").
16 Software license of this Agreement. Customer shall not a) use, copy, modify, transfer or distribute the Software except as expressly authorized; b) reverse assemble, reverse compile, reverse engine.
Nortel Networks Inc. software license agreement 17 software documentation and, in the event Software is licensed for or on behalf of the United States Government, the respective rights to the software and software documentation are governed by Nortel Networks standard commercial license in accordance with U.
18 Software license Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .
19 . Ne w in this Release The following sections detail what’s new in Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply, NN46200-310 for Release 4.1: • “Features” (page 19) • “Other changes” (page 19) Features The 8005DC and 8005DI DC is a new feature for the Ethernet Routing Switch 8300.
20 New in this Release Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .
21 . Intr oduction This guide provides information about the 8005 Dual Input (DI) DC and 8005DC power supplies used in the Ethernet Routing Switch 8300.
22 Introduction Table 1 Task and estimated time Task Estimated Time Preparing cable for installation 5 minutes for each power supply Removing the power filler panel 1 minute for each power supply Inst.
23 . DC po wer suppl y fundamentals This section provides the basic information about the Ethernet Routing Switch 8300 DC power supplies. Navigation • “Power supply LED” (page 23) • “Etherne.
24 DC power supply fundamentals In addition to the DC power supply and the installation guide, your DC power supply shipment contains several hardware accessories. Verify that the items in the shipping container match those on the shipment packing list.
8005DC power supply 25 Minimum number of 8005DI DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the total power consumption to ensure proper system performance. The total input power consumption of the components (modules and fan trays) must not exceed the 8005DI DC power supply rating.
26 DC power supply fundamentals Minimum number of 8005DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the total power consumption to ensure proper system performance.
27 . DC po wer suppl y installation This chapter provides instructions to install the DC power supply in the Ethernet Routing Switch 8300 chassis. See Nortel Ethernet Routing Switch 8300 Administration, NN46200-604 for the minimum Ethernet Routing Switch 8300 software version required to support the hardware.
28 DC power supply installation DC power supply installation navigation • “Determining the minimum number of DC power supplies” (page 28) • “Preparing cables for installation” (page 29) .
Preparing cables for installation 29 For more information, see Nortel Ethernet Routing Switch 8300 Installation — Chassis, NN46200-309 . Procedure steps Step Action 1 Add the total (3.3 V and 12 V) input power consumption (wattage) for all components (modules and fan trays or cooling modules).
30 DC power supply installation 1 Strip 0.81 in. (2.1 cm) of insulation from the ends of the cables. 2 Crimp the lugs onto the cables using a standard crimping tool. CAUTION Risk of injury by electric shock Failure to properly crimp the lugs onto the cables constitutes a safety hazard.
Installing the DC power supply 31 CAUTION To maintain proper cooling, never operate the chassis with an empty power supply bay. If you replace a failed power supply and you have no power filler panel, leave the failed power supply installed until a replacement power supply is available.
32 DC power supply installation CAUTION Risk of equipment damage To prevent damage from electrostatic discharge, always wear an antistatic wrist strap connected to an ESD jack. DANGER Risk of injury by electric shock Before working on this equipment, be aware of proper safety practices and the hazards involved with electrical circuits.
Installing the DC power supply 33 5 Push the new power supply partway into the bay, leaving the terminal block at the side of the power supply exposed. See “Job aid: Inserting the DC power supply” (page 36) . 6 Use a Phillips screwdriver to remove the screw that secures the plastic safety cover to the power supply and remove the cover.
34 DC power supply installation 10 Attach the positive voltage lead to the positive terminal on the power supply and insert a lock washer between the crimp lug and each hex nut. 11 Attach the negative voltage lead to the negative terminal on the power supply to insert a lock washer between the crimp lug and each hex nut.
Installing the DC power supply 35 15 Firmly slide the power supply all the way into the bay. See “Job aid: Tightening the retaining screws on the DC power supply” (page 37) .
36 DC power supply installation Job aid: Inserting the DC power supply Figure 1 Inserting the DC power supply: 8306 and 8310 chassis Job aid: DC power supply input and ground stud location Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.
Installing the DC power supply 37 Job aid: Attaching the earth ground lead to the ground stud Job aid: Tightening the retaining screws on the DC power supply Figure 2 Tightening the retaining screws on the DC power supply: 8306 and 8310 chassis Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.
38 DC power supply installation Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .
39 . T ranslations of safety messages This section provides translations of the different precautionary notices used in this document. Notices CAUTION This device is a Class A product.
40 Translations of safety messages CAUTION CUIDADO Este dispositivo é um produto Classe A. Operar este equipamento em uma área residencial provavelmente causará interferência prejudicial; neste caso, espera-se que os usuários tomem as medidas necessárias para corrigir a interferência por sua própria conta.
Notices 41 CAUTION PRECAUCIÓN Riesgo de daños en los equipos Controle que el cable de conexión que utilice con la fuente de alimentación de CC sea el adecuado. Para determinar qué cables debe utilizar, evalúe el calibre, la inflamabilidad y la funcionalidad mecánica.
42 Translations of safety messages CAUTION PRECAUCIÓN Riesgo de daño del equipo Para prevenir el daño producido por una descarga electrostática, use siempre una pulsera antiestática conectada a un enchufe ESD.
Notices 43 DANGER PERIGO Risco de ferimento por choque elétrico Enrolar os suportes aos cabos de maneira incorreta implica em um risco de segurança. DANGER PERICOLO Rischio di lesioni per shock elettrico Il piegamento non corretto delle linguette nei cavi costituisce un rischio per la sicurezza.
44 Translations of safety messages CAUTION CUIDADO Para manter o resfriamento adequado, nunca opere o Ethernet Routing Switch 8300 com um compartimento de fonte de alimentação vazio.
Notices 45 CAUTION ATTENZIONE Conservare il pannello di riempimento dell’alimentatore nel caso in cui sia necessario utilizzare il Ethernet Routing Switch 8300 con l’alimentatore rimosso. Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.
46 Translations of safety messages Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .
47 . Appendix T echnical specifications This appendix lists the electrical specifications for the 8005DI DC power supplies. T ec hnical specifications navigation • “Model 8005DI DC power supply.
48 Technical specifications Table 5 DC output power specifications for Model 8005DI DC power supply Parameter Specifications Output power (maximum) 1462 W continuous, 1660 W peak with forced air cooling Modules 3.3 V @ 150 A 12 V @ 72 A Fans 12 VDC @ 7.
Model 8005DC power supply 49 Table 7 DC output power specifications for Model 8005DC power supply (cont’d.) Parameter Specifications Fans 12 VDC @ 7.5 A/ 24 A peak MTBF 108 803 hr (Bellcore TR–332 standard) Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.
50 Technical specifications Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyright © 2008 Nortel Networks .
.
Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply Copyright © 2008 Nortel Networks All Rights Reserved. Printed in Canada and the United States of America Release: 4.1 Publication: NN46200-310 Document status: Standard Document revision: 01.
Een belangrijk punt na aankoop van elk apparaat Nortel NN46200-310 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nortel NN46200-310 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nortel NN46200-310 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nortel NN46200-310 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nortel NN46200-310 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nortel NN46200-310 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nortel NN46200-310 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nortel NN46200-310 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
