Gebruiksaanwijzing /service van het product EPU van de fabrikant Asus
Ga naar pagina of 148
Motherboard P5K/EPU.
ii E3873 Third Edition V3 April 2008 Copyright © 2008 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, trans.
iii Contents Contents ...................................................................................................... iii Notices ........................................................................................................ vii Safety information .
iv Contents 2.6 Jumper ........................................................................................ 2-23 2.7 Connectors ................................................................................. 2-24 2.7.1 Rear panel connectors ....
v Contents 4.4.3 CPU Conguration ........................................................ 4-22 4.4.4 Chipset .......................................................................... 4-23 4.4.5 OnBoard Devices Conguration ......................
vi Contents 5.3.7 ASUS Q-Fan 2 .............................................................. 5-22 5.3.8 ASUS AI Booster ........................................................... 5-23 5.3.9 ASUS AI Direct Link .......................................
vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
viii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
ix About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
x Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
xi P5K/EPU specications summary CPU LGA775 socket for Intel ® Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® Extreme / Pentium ® D / Pentium ® 4 Processors Supports FSB 1600 / 1333 / 1066 / 800 MHz Compatible with Intel ® 05B/05A/06 processors Intel ® Hyper-Threading T echnology ready * Refer to www .
xii P5K/EPU specications summary IEEE 1394 VIA ® VT6308P controller supports 2 x IEEE 1394a ports (one at midboard; one at back panel) USB 12 x USB 2.
xiii P5K/EPU specications summary Back Panel I/O Ports 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x S/PDIF Out (Coaxial) 1 x IEEE1394a 1 x RJ45 port 6 x USB 2.
xiv.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
ASUS P5K/EPU Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features .
ASUS P5K/EPU 1-1 1.1 Welcome! Thank you for buying an ASUS ® P5K/EPU motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line .
1-2 Chapter 1: Product Introduction 1.3 Special features 1.3.1 Product highlights Intel ® LGA775 Core™ 2 Processor Ready This motherboard supports the latest Intel® Core™2 and Core™2 Quad processors in LGA775 package. It also can support Intel® next generation 45nm Multi-Core CPU.
ASUS P5K/EPU 1-3 IEEE 1394a support The IEEE 1394a interface provides high speed digital interface for audio/video appliances such as digital television, digital video camcorders, storage peripherals & other PC portable devices. See pages 2-23 and 2-28 for details.
1-4 Chapter 1: Product Introduction 1.3.2 ASUS AI Lifestyle unique features ASUS Quiet Thermal Solution ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability .
ASUS P5K/EPU 1-5 ASUS Crystal Sound This feature enhances the audio on speech-centric applications like Skype, online game, video conference and recording.
1-6 Chapter 1: Product Introduction ASUS MyLogo3™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen.
2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
ASUS P5K/EPU Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-2 2.3 Central Processing Unit (CPU) .
ASUS P5K/EPU 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
2-2 Chapter 2: Hardware information P5K/EPU ® 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard.
ASUS P5K/EPU 2-3 2.2.3 Motherboard layout P ANEL P5K/EPU ® AAFP CHASSIS 24.5cm (9.6in) 30.5cm (12.0in) CPU_FAN FLOPPY Super I/O CD CLRTC Intel ® ICH9 EA TXPWR CR2032 3V Lithium Cell CMOS Power Intel.
2-4 Chapter 2: Hardware information 2.2.4 Layout contents Slots Page 1. DDR2 DIMM slots 2-13 2. PCI slots 2-20 3. PCI Express x 1 slots 2-20 4. PCI Express x16 slots 2-20 Jumper Page 1. Clear RTC RAM (3-pin CLR TC) 2-22 Rear panel connectors Page 1. PS/2 mouse port (green) 2-23 2.
ASUS P5K/EPU 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-25 2. IDE connector (40-1 pin PRI_EIDE)) 2-25 3. ICH9 Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [red], SA T A4 [red]) 2-26 4. USB connectors (10-1 pin USB78, USB910, USB1 1 12) 2-28 5.
2-6 Chapter 2: Hardware information 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Core™2 Quad /Core™2 Extreme / Core™2 Duo .
ASUS P5K/EPU 2-7 3. Lift the load lever in the direction of the arrow to a 135º angle. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab Load lever This side of the socket box should face you.
2-8 Chapter 2: Hardware information 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket then t the socket alignment key into the CPU notch. Alignment key Gold triangle mark 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab.
ASUS P5K/EPU 2-9 Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. T o install the CPU heatsink and fan: 1.
2-10 Chapter 2: Hardware information 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.
ASUS P5K/EPU 2-1 1 2.3.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembl y from the motherboard.
2-12 Chapter 2: Hardware information 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. Narrow end of the groove Refer to the documentation in the boxed or stand-alone CPU fan package for detailed information on CPU fan installation.
ASUS P5K/EPU 2-13 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM.
2-14 Chapter 2: Hardware information • If you install four 1 GB memory modules, the system may detect less than 3 GB of total memory because of address space allocation for other critical functions.
ASUS P5K/EPU 2-15 P5K/EPU Motherboard Qualied V endors Lists (QVL) DDR2-800MHz capability P5K/EPU Motherboard Qualied V endors Lists (QVL) DDR2-1066MHz capability P5K/EPU Motherboard Qualied V endors Lists (QVL) DDR2-1200MHz(O.C.) capability Size V endor Chip No.
2-16 Chapter 2: Hardware information P5K/EPU Motherboard Qualied V endors Lists (QVL) DDR2-800MHz capability Size V endor Chip No. CL Chip Brand SS/ DS Part No. DIMM support A* B* C* 512MB Crucial Heat-Sink Package 4 N/A SS BL6464AA804.8FD V V V 512MB Crucial Heat-Sink Package 4 N/A SS BL6464AA804.
ASUS P5K/EPU 2-17 P5K/EPU Motherboard Qualied V endors Lists (QVL) DDR2-667MHz capability Visit the ASUS website for the latest DDR2-1066/800/667 MHz QVL. SS - Single-sided / DS - Double-sided DIMM support: • A*: Supports one module inserted in any slot as Single-channel memory conguration.
2-18 Chapter 2: Hardware information 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1.
ASUS P5K/EPU 2-19 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1.
2-20 Chapter 2: Hardware information 2.5.3 Interrupt assignments * These IRQs are usually available for PCI devices. A B C D E F G H PCI slot 1 — shared — — — — — — PCI slot 2 — shared.
ASUS P5K/EPU 2-21 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
2-22 Chapter 2: Hardware information Primary PCI Express x16 slot The primary PCI Express x16 slot supports PCI Express x16 graphic cards that comply with the PCI Express specications. Universal PCI Express slot (max. x4 mode) This motherboard also supports a Universal PCI Express slot with a maximum speed of 2 GB/s.
ASUS P5K/EPU 2-23 2.6 Jumper 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and s ystem setup parameters by erasing the CMOS RTC RAM data.
2-24 Chapter 2: Hardware information 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. IEEE 1394a port. This 6-pin IEEE 1394a port provides high-speed connectivity for audio/video devices, storage peripherals, PCs, or portable devices.
ASUS P5K/EPU 2-25 8. Microphone port (pink). This port connects a microphone. 9. Side Speaker Out port (gray). This port connects the side speakers in an 8-channel audio conguration. Refer to the audio conguration table below for the function of the audio ports in 2, 4, 6, or 8-channel conguration.
2-26 Chapter 2: Hardware information 2.7.2 Internal connectors 1. Floppy disk drive connector (34-1 pin FLOPPY) This connector is for the provided oppy disk drive (FDD) signal cable. Insert one end of the cable to this connector , then connect the other end to the signal connector at the back of the oppy disk drive.
ASUS P5K/EPU 2-27 3. ICH9 Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [red], SA T A4 [red]) These connectors are for the Serial A T A signal cables for Serial A T A hard disk drives.
2-28 Chapter 2: Hardware information 4. USB connectors (10-1 pin USB 78, USB 9 10, USB 1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS P5K/EPU 2-29 6. CPU, chassis and power fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN1-2, 3-pin PWR_F AN) The fan c onnect ors su pport co oling fans o f 350 mA ~ 2000 mA (24 W max.
2-30 Chapter 2: Hardware information 8. AT X p owe r c on ne cto rs (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS P5K/EPU 2-31 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 400 W . • Do not forget to connect the 4-pin A TX12V power plug; otherwise, the system will not boot.
2-32 Chapter 2: Hardware information P5K/EPU ® P5K/EPU Internal audio connector CD Right Audio Channel Left Audio Channel Ground Ground 10. Optical drive audio con nec tor (4-pin CD) This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card.
ASUS P5K/EPU 2-33 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
2-34 Chapter 2: Hardware information ASUS Q-Connector (system panel) Y ou can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q- Connector . 1. Connect the front panel cables to the ASUS Q-Connector .
3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system..
ASUS P5K/EPU Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer .
ASUS P5K/EPU 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector .
3-2 Chapter 3: Powering up 3.2 Turning off the computer 3.2.1 Using the OS shut down function If you are using Windows ® XP: 1. Click the Start button then select T urn Off Computer . 2. Click the T urn Off button to shut down the computer . 3. The power supply should turn off after Windows ® shuts down.
4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Chapter summary 4 ASUS P5K/EPU 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................... 4-8 4.3 Main menu .........................
ASUS P5K/EPU 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows ® environment.) 2. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk or USB ash disk.
4-2 Chapter 4: BIOS setup 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate .
ASUS P5K/EPU 4-3 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate . The ASUS Update main window appears.
4-4 Chapter 4: BIOS setup T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard. 2. Save the BIOS le to a oppy disk or a USB ash disk, then restart the system. 4.
ASUS P5K/EPU 4-5 4.1.3 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process.
4-6 Chapter 4: BIOS setup 2. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable oppy disk you created earlier . 3. Boot the system in DOS mode, then at the prompt type: afudos /i[lename] where [lename] is the latest or the original BIOS le on the bootable oppy disk.
ASUS P5K/EPU 4-7 4.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using the motherboard support DVD or the USB ash disk that contains the updated BIOS le.
4-8 Chapter 4: BIOS setup 4.2 BIOS setup program This motherboard supports a programmable Serial Peripheral Interface (SPI) chip that you can update using the provided utility described in section 4.
ASUS P5K/EPU 4-9 Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Main Advanced Power Boot Tools Exit System Time [10:55:25] System Date [Thu 04/14/2007] Floppy Diskette A [1.
4-10 Chapter 4: BIOS setup 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
ASUS P5K/EPU 4-1 1 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
4-12 Chapter 4: BIOS setup 4.3.4 SA T A 1-4 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each SA T A device. Select a device item then press <Enter> to display the SA T A device information.
ASUS P5K/EPU 4-13 DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology .
4-14 Chapter 4: BIOS setup 4.3.6 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMIBIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication.
ASUS P5K/EPU 4-15 BIOS SETUP UTILITY Advanced 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. 4.4.1 JumperFree Conguration T ake caution when changing the settings of the Advanced menu items.
4-16 Chapter 4: BIOS setup CPU Ratio Control [Auto] Conguration options: [Auto] [Manual] The following item appears when the CPU Ratio Control item is set to [Manual]. Ratio CMOS Setting [9] Sets the ratio between CPU Core Clock and the FSB Frequency .
ASUS P5K/EPU 4-17 DRAM Command Rate [Auto] Conguration options: [Auto] [1T] [2T] DRAM Timing Control [Auto] Conguration options: [Auto] [Manual] The following items appear when you set the DRAM Timing Control item to [Manual].
4-18 Chapter 4: BIOS setup T ransaction Booster [Auto] Conguration options: [Auto] [Disabled] [Enabled] Relax Level [0] This sub-item appears only when you set the T ransaction Booster item to [Disabled]. Set this item to a higher level to get better compatibility .
ASUS P5K/EPU 4-19 • Setting the CPU PLL Voltage, FSB T ermination V oltage, DRAM V oltage and North Bridge V oltage to a high level may damage the chipset, memory module, and CPU permanently .
4-20 Chapter 4: BIOS setup 4.4.2 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K/EPU 4-21 Legacy USB Support [Auto] Allows you to enable or disable the support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled.
4-22 Chapter 4: BIOS setup Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Advanced 4.4.3 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects.
ASUS P5K/EPU 4-23 BIOS SETUP UTILITY Advanced 4.4.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of the overlapped PCI memory above the total physical memory .
4-24 Chapter 4: BIOS setup 4.4.5 OnBoard Devices Conguration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K/EPU 4-25 4.4.6 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCIPnP menu items. Incorrect eld values can cause the system to malfunction. Plug And Play O/S [NO] When set to [NO], BIOS congures all the devices in the system.
4-26 Chapter 4: BIOS setup 4.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
ASUS P5K/EPU 4-27 4.5.5 APM Conguration Restore On AC Power Loss [Power Off] When set to [Power Off], the system goes into of f state after an AC power loss.
4-28 Chapter 4: BIOS setup Power On By PS/2 Keyboard [Disabled] Allows you to disable the Power On by PS/2 keyboard function or set specic keys on the PS/2 keyboard to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS P5K/EPU 4-29 CPU Fan Prole [Optimal] Allows you to set the appropriate performance level of the ASUS Q-Fan. When set to [Optimal], the CPU fan automatically adjusts depending on the CPU temperature. Set this item to [Silent Mode] to minimize fan speed for quiet CPU fan operation, or [Performance Mode] to achieve maximum CPU fan speed.
4-30 Chapter 4: BIOS setup 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K/EPU 4-31 4.6.2 Boot Settings Conguration v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Boot Boot Settings Conguration Quick Boot [Enabled] Full Screen Logo.
4-32 Chapter 4: BIOS setup 4.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password.
ASUS P5K/EPU 4-33 User Access Level [Full Access] This item allows you to select the access restriction to the Setup items. Conguration options: [No Access] [View Only] [Limited] [Full Access] [No Access] prevents user access to the Setup utility .
4-34 Chapter 4: BIOS setup 4.7 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item +- Change Field Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
ASUS P5K/EPU 4-35 4.7.2 ASUS Ai Net 2 v02.61 (C)Copyright 1985-2007, American Megatrends, Inc. BIOS SETUP UTILITY Tools Check LAN cable during POST. Pair Status Length 1-2 N/A 3-6 N/A 4-5 N/A 7-8 N/A .
4-36 Chapter 4: BIOS setup 4.8 Exit menu Pressing <Esc> does not immediately exit this menu. Select one of the options from this menu or <F10> from the legend bar to exit. The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items.
5 Software support This chapter describes the contents of the support DVD that comes with the motherboard package and the softwares..
ASUS P5K/EPU Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support DVD information ............................................................ 5-1 5.3 Software information ...........
ASUS P5K/EPU 5-1 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the DVD. Click an item to install 5.1 Installing an operating system This motherboard supports Windows ® XP/ 64-bit XP/ Vista™ operating systems (OS).
5-2 Chapter 5: Software support 5.2.2 Drivers menu The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll-Drivers Installation Wizard Installs all of the drivers through the Installation Wizard.
ASUS P5K/EPU 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard.
5-4 Chapter 5: Software support ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows ® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP).
ASUS P5K/EPU 5-5 5.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. Y ou can also nd this information on the inside front cover of this user guide. 5.2.5 Manual menu The Manual menu contains a list of supplementary user manuals.
5-6 Chapter 5: Software support Browse this DVD Displays the support DVD contents in graphical format. 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD.
ASUS P5K/EPU 5-7 T echnical support Form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.
5-8 Chapter 5: Software support 5.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
ASUS P5K/EPU 5-9 9. When the screen returns to the ASUS Update utility , ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST . 8. Adjust the boot image to your desired size by selecting a value on the Ratio box.
5-10 Chapter 5: Software support 3. Click the Run button to perform a cable test. 5.3.2 AI NET2 The AI NET2 features the Marvell ® Virtual Cable T ester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the T ime Domain Reectometry (TDR) technology .
ASUS P5K/EPU 5-1 1 5.3.3 ASUS PC Probe II PC Probe II is a utility that monitors the computer ’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others.
5-12 Chapter 5: Software support Sensor alert When a system sensor detects a problem, the main window right handle turns red, as the illustrations below show . When displayed, the monitor panel for that sensor also turns red. Refer to the Monitor panels section for details.
ASUS P5K/EPU 5-13 Changing the monitor panels position T o change the position of the monitor panels in the desktop, click the arrow down button of the Scheme options, then select another position from the list box. Click OK when nished. Moving the monitor panels All monitor panels move together using a magnetic effect.
5-14 Chapter 5: Software support Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below . Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser .
ASUS P5K/EPU 5-15 PCI browser Click to display the PCI (Peripheral Component Interconnect) browser . This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information.
5-16 Chapter 5: Software support Memory usage The Memory tab shows both used and available physical memory . The pie chart at the bottom of the window represents the used (blue) and the available physical memory . Conguring PC Probe II Click to view and adjust the sensor threshold values.
ASUS P5K/EPU 5-17 5.3.4 ASUS AI Suite ASUS AI Suite allows you to launch AI Gear 3 + , AI Booster , AI Nap, and Q-Fan 2 utilities easily . Install the ASUS EPU + AI Gear 3 Driver before the ASUS AI Suite utility . Otherwise, the ASUS AI Suite will not function properly .
5-18 Chapter 5: Software support Other feature buttons Click on right corner of the main window to open the monitor window . Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit.
ASUS P5K/EPU 5-19 Auto Mode Calibration T urbo Mode High Performance Mode Medium Power Saving Mode Max. Power Saving Mode Settings 5.3.5 ASUS EPU Utility—AI Gear 3 + AS US AI G ea r 3 + is a utility designed to configure and support all ASUS EPU (Energy Processing Unit) features.
5-20 Chapter 5: Software support Energy Saving Status Displays the current CPU Displays the time/date the calculato r starts counting Displays the a m o u n t o f electricity saved since th e system started up Displays the amount of CO2 that has been reduced Click to open the Electricity Savings Calculator window .
ASUS P5K/EPU 5-21 5.3.6 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away . Enable this feature for minimum power consumption and a more quiet system operation.
5-22 Chapter 5: Software support 5.3.7 ASUS Q-Fan 2 This ASUS Q-Fan 2 Control feature allows you to set the appropriate performance level of the CPU Q-Fan 2 or the Chassis Q-Fan 2 for more efcient system operation.
ASUS P5K/EPU 5-23 5.3.8 ASUS AI Booster The ASUS AI Booster application allows you to overclock the CPU speed in WIndows ® environment without the hassle of booting the BIOS.
5-24 Chapter 5: Software support 5.3.9 ASUS AI Direct Link ASUS AI Direct Link allows you to form a computer-to-computer network via a network cable to share les with high transfer rate.
ASUS P5K/EPU 5-25 The default path of the AIDirectLinkIncoming folder is C:Program FilesASUSAI Direct Link. T o change its location, disable the incoming folder rst. Then, select Incoming folder > Change incoming folder to open the system directories, and move the AIDirectLinkIncoming folder under another directory .
5-26 Chapter 5: Software support.
6 This chapter tells how to install A TI ® CrossFire™ graphics cards to avail of A TI’s Multi-Video Processing technology . ATI ® CrossFire™ technology support.
ASUS P5K/EPU Chapter summary 6 6.1 Overview ....................................................................................... 6-1 6.2 Installing CrossFire™ graphics cards ....................................... 6-2 6.3 Software information ...
ASUS P5K/EPU 6-1 6.1 Overview The motherboard supports the A TI ® CrossFire™ technology that allows you to install multi-graphics processing units (GPU) graphics cards.
6-2 Chapter 6: A TI ® MVP technology support Slave graphics card Master graphics card 2. Insert the CrossFire™ Edition (Master) graphics card into the PCI Express x16 blue slot.
ASUS P5K/EPU 6-3 3. Insert the CrossFire™-ready (Slave) graphics card into the PCI Express x16 black slot. Make sure that the card is properly seated on the slot.
6-4 Chapter 6: A TI ® MVP technology support 6. Connect the other end of the external cable to the Slave graphics card. 7. Connect the loose end to the corresponding port on your monitor . 5. Connect one end of the external cable to the Master graphics card.
ASUS P5K/EPU 6-5 6.3 Software information 6.3.1 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers.
6-6 Chapter 6: A TI ® MVP technology support 6. Select the components that you want to install, then click Next . Setup prepares the installation wizard that will guide you to setup process. Windows automatically congures the A TI Catalyst Control Center .
ASUS P5K/EPU 6-7 6.3.2 Using the Catalyst™ Control Center The Catalyst™ Control Center allows you to access display features of the A TI hardware and software you installed. Use this application to adjust your graphic settings, enable/disable connected devices, and change your desktop orientation.
6-8 Chapter 6: A TI ® MVP technology support The Catalyst™ Control Center Dialog Box View The Catalyst™ Control Center provides two views: Standard - simple view with wizards for beginners Advance - allows advanced users to access and congure the complete features of the software Set to Advance view to enable the CrossFire™ function.
ASUS P5K/EPU 6-9 T o enable CrossFire™: 1. Set the view to Advance . 2. Click the Crossre™ item in Graphics Settings. 3. In the CrossFire™ Settings dialog, tick the box opposite Enable CrossFire™ .
6-10 Chapter 6: A TI ® MVP technology support Profiles Click the Proles tab on the Catalyst™ Control Center to access the Proles Manager , which allows you to create customized environments for your desktop, video, and 3D applications.
ASUS P5K/EPU 6-1 1 Help Click the Help tab on the Catalyst™ Control Center to access the online help system, generate a Problem Report, and get the Catalyst™ Control Center version information.
6-12 Chapter 6: A TI ® MVP technology support.
A CPU features The Appendix describ es the CPU features and technologies that the motherboard supports..
ASUS P5K/EPU Chapter summary A A.1 Intel ® EM64T .................................................................................. A-1 A.2 Enhanced Intel SpeedStep ® T echnology (EIST) ........................ A-1 A.3 Intel ® Hyper-Threading T echnology .
ASUS P5K/EPU A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T . Y ou can download the latest BIOS le from the ASUS website (www .
A-2 Appendix: CPU features A.2.2 Using the EIST T o use the EIST feature: 1. T urn on the computer , then enter the BIOS Setup. 2. Go to the Advanced Menu, highlight CPU Conguration, then press <Enter>. 3. Set the Intel(R) SpeedStep T echnology item to [Automatic], then press <Enter>.
ASUS P5K/EPU A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading T echnology . • Hy per -Thr ead ing Te chn ol ogy is sup por ted und er Win dow s ® Vista/XP and Linux 2.
A-4 Appendix: CPU features.
Een belangrijk punt na aankoop van elk apparaat Asus EPU (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus EPU heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus EPU vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus EPU leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus EPU krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus EPU bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus EPU kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus EPU . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.