Gebruiksaanwijzing /service van het product ES521 van de fabrikant Optoma
Ga naar pagina of 52
1 English T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ...........
2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
3 English Usage Notice When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. T o replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 40-41.
4 English Usage Notice Do: Turn of f and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.
6 English Introduction Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box.
7 English Introduction 1. POWER button and LED indicator 2. V entilation (inlet) 3. Zoom Ring 4. Focus Ring Main Unit Product Overview 5. Zoom Lens 6. IR Receiver 7.
8 English Introduction VGA-IN/SCART RS232 VIDEO S-VIDEO Input / Output Connection VGA-IN/SCART VGA-OUT S-VIDEO RS232 VIDEO 4 5 7 6 1. VGA-In/SCART Connector (PC Analog Signal/Component Video Input/HDTV/SCAR T/ YPbPr) 2. S-Video Input Connector 3. Composite Video Input Connector 4.
9 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. No Function on this model 4. No Function on this model 5. Four Directional Select Keys 6. Re-Sync 7. No Function on this model 8. No Function on this model 9. Zoom 10. A V mute 1 1.
10 English Introduction Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Conrm your item selection. Source Press “SOURCE” to select an input signal. Re-SYNC Automatically synchronizes the projector to the input source.
11 English Installation VGA-IN/SCART VGA-OUT S-VIDEO RS232 VIDEO E62405SP R Connecting the Projector Due to the difference in applications for each country , some regions may have different accessories. (*) Optional accessory Connect to Computer/Notebook 1 3 1.
12 English Installation VGA-IN/SCART VGA-OUT S-VIDEO RS232 VIDEO E62405SP R Connect to Video Sources 1....................................................................................................Power Cord 2.....................................
13 English Installation Powering On the Projector 1. Securely connect the pow er cord and signal cable. When connected, the Power LED will turn Red. 2. T urn on the lamp by pressing “POWER” button either on the top of the projector or on the remote.
14 English Installation Powering Off the Projector 1. Press the “POWER” button to turn off the projector lamp. The following message will be displayed on the screen. Press the “POWER” button again to conrm, otherwise the message will disappear after 15 seconds.
15 English Installation Adjusting the Projected Image Adjusting the Projector ’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector .
16 English Installation Adjusting the Projector ’s Zoom / Focus Focus Ring Zoom Ring Y ou may turn the zoom ring to zoom in or out. T o focus the image, rotate the focus ring until the image is clear . The projector will focus at distances from 3.3 to 39.
17 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “MENU” on the Remote Control.
18 English User Controls Menu T ree (QJOLVK , 0$*( 'LVSOD0 RGH %ULJKWQH VV &RQWUDVW 6KDUSQHV V &RORU 7LQW $GYDQFHG ,0$*( _$'9$1&( ' 'HJDPPD )LOP9LGH R.
19 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater . sRGB: Standardised accurate color .
20 English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. Press the to decrease the contrast.
21 English User Controls IMAGE | Advanced Degamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input. Film: for home theater . Video: for video or TV source. Graphics: for image source.
22 English User Controls Advanced |Color Settings Color Settings Use these settings for advanced adjustment of the individual Red, Green, Blue, Cyan, Magenta and Y ellow Colors. Reset Choose “Y es” to return the factory default settings for color adjustments.
23 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources. 16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV . 16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .
24 English User Controls 16 : 9-I format or or 16 : 9-II format 4 : 3 format Native format Input Signal Display area Picture area Display on Screen.
25 English User Controls Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom Press the to reduce the size of an image. Press the to magnify an image on the projection screen.
26 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language.
27 English User Controls SETUP Projection Front-Desktop This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed. Front-Ceiling When selected, the image will turn upside down.
28 English User Controls Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.
29 English User Controls SETUP | Signal Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer ’s graphic card.
30 English User Controls SETUP | Security Security On: Choose “On” to use security verication when the turning on the projector . Off: Choose “Of f” to be able to switch on the projector without password verication.
31 English User Controls SETUP | Security Change Password First time: 1 . Pres s “ ” to set t he pas sword. 2. The p asswor d has to be 4 di gits. 3. Use num ber but ton o n the re mote to enter your n ew passwo rd and t hen pre ss “ ” key to con rm your pas swor d.
32 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.
33 English User Controls Source Lock On: The projector will search specied connection port. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster .
34 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without press- ing “POWER” button either on the top of the projector or on the remote.
35 English Appendices Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken.
36 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).
37 English Appendices Image is out of focus Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance 3.
38 English Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power . Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound.
39 English Appendices On Screen Messages T emperature warning: Fan failed: Lamp warning: Out of display range: Remote Control Problems If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .
40 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
41 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “POWER” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover .
42 English Appendices Compatibility Modes Mode Resolution V -Sync (Hz) H-Sync (KHz) VGA 640 × 480 60 31.50 VGA 640 × 480 72 37.90 VGA 640 × 480 75 37.50 VGA 640 × 480 85 43.30 VGA 720 × 400 70 31.50 VGA 720 × 400 85 37.90 SVGA 800 × 600 56 35.20 SVGA 800 × 600 60 37.
43 English Appendices Video Compatibility NTSC NTSC M/J, 3.58MHz, 4.43 MHz P AL B/D/G/H/I/M/N, 4.43 MHz SECAM B/D/G/K/K1/L, 4.25/4.4 MHz SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1080p(24/50/60Hz) Mode Resolution V -Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.
44 English Appendices RS232 Commands RS232 Pin Assignments Pin no. Spec. 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 Pin no.
45 English Appendices RS232 Protocol Function List RS232 Commands Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None 1. There is a <CR> after all ASCII commands.
46 English Appendices ----------------------------- --------------------------------------------- ------------------------------------------ ------------------------------------------------------- ---.
47 English Appendices ----------------------------- --------------------------------------------- ------------------------------------------ ------------------------------------------------------- ---.
48 English Appendices Please note that damage resulting from incorrect installation will invalidate the warranty . Ceiling Mount Installation 1.
49 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www .optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www .
50 English Appendices Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www .optoma.com.br www .optoma.com.mx Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOREA +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム info@osscreen.
51 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
52 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation.
Een belangrijk punt na aankoop van elk apparaat Optoma ES521 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Optoma ES521 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Optoma ES521 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Optoma ES521 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Optoma ES521 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Optoma ES521 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Optoma ES521 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Optoma ES521 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
