Gebruiksaanwijzing /service van het product SignShow D5000 van de fabrikant Optoma
Ga naar pagina of 56
Digital Signage Processor User Manual 1 2 V R E S E T VI D E O I N D V I U S B L A N WI R E I R R S 2 3 2 AU D I O I N AUD I O O U T S D SignShow D5000.
Table of Contents i Safety Instructions iv Power Cord & adapter Warnings .............................................. iv Technical Support ...................................................................... v Declaration of Conformity vi FCC Notice .
Table of Contents ii Play Mode ................................................................................ 18 Schedule ........................................................................................... 19 S-Video ........................
Table of Contents iii Video Input .............................................................................. 43 Hardware Specifications .......................................................... 45 7 4 g n i t o o h s e l b u o r T Error Messages .
Safety Instructions & Warranty iv Safety Instructions Use the following saf ety guidelines to help protect yourself and your Digital Signage P rocessor . • Do not attempt to service the Digital Signag e P rocessor yourself. Always follow install ation instructions closely .
Safety Instructions & Warranty v • Before you connec t the Digital Signage P roc essor to a power source, ensure that the voltage rating o f the AC adapte r matches that of the available power s ource. • 115 V/60 Hz in most of North and South America and some Far Eastern countries such as South K orea and T aiwan.
Declaration of Conformity vi Declar ation of Conformity FCC Notice This equipment has been tested and fo und to comply with the limits for a Class B digital device, pursuant to pa rt 15 of the FCC Rules. The se limits are designed to provide re asonable protection ag ainst harmful interference in a reside ntial installa tion.
Declaration of Conformity vii • EN61000-3-3. (IEC6100 0-3-3)-P ower Line Flicker • EN60950 (IEC60950). Product Safety Japanese Notice WEEE Notice • The Directive 2002/96/EC on W aste Electrical .
Introduction 1 Introduction Overv iew Thank you for purchasing your Digital Signage P rocessor . This Digital Signage P rocessor is a powerful digital engine for high quality video and graphics. It can perform live broadcasts, video/audio files, and display tickers.
Introduction 2 F eatures • High P erformance. Full HD (1080P) output with hardware video/audio decoder , supports up to 2 videos / 2 graphics/ 2 tickers. • Compact. The compact and rugged case design makes it easy to mount and install. • Network-Manageable.
Introduction 3 P ack a ge Contents When unpacking, please ensure the following items are included. If any items are missing or damaged, please contact your retailer .
Introduction 4 Connectors Vi ew No. Item Description 1 P ower sock et Use to connect to the power adapter 2 R eset button P ress to reset the Digital Signage P rocessor settings 3 Audio In Use to conn.
Introduction 5 Remote Control The Digital Signage P rocessor comes with a remote control for inputting commands. The diagram and table below show the keys and basic operation of the remote control.
Getting Started 6 Getting Started Setting up New SD Card Content Y ou need to set up the contents of the SD card before using it for the first time. The sample media files and system drivers (libxxx.img) for the SD card content can be found in the included CD-ROM.
Getting Started 7 1 . I n s e r t t h e S D c a r d i n t h e c a rd slot with the contacts facing upward. 2. Slide it until it clicks into place. 3. T o protect the SD card fr om damage or accidental loss, screw the SD card protector onto the case. R efer to the diagram below .
Getting Started 8 Remov ing t he SD Card 1. Unscrew the SD card protector from the case. 2. Gently push the SD card in until it clicks to release the lock.
Getting Started 9 Simply plug in the USB cable of your device to the USB port of the Digital Signage P rocessor . A USB extension cable is provided with your Digital Signage P rocessor package for easy access and connection. Connecting to a Network For rapid content file updates, connect to InfoSAP Creator.
Getting Started 10 Connect speakers using the stereo jack on your device. Audio files must first be edited by using InfoSAP Creator. Connecting an Audio In Component Y our Digital Signage P rocessor supports component Audio-in from devices such as a DVD player or set-top box (STB).
Getting Started 11 Media content must first be edited using InfoSAP Creator. LED Indicator The LED indicator indicates the status of your Digital Signage P rocessor .
Menu 12 Menu The Menu consists of menu options for your Digital Signage P rocessor . P ress on the remo te control to activate the Menu. P ress the Up/Down arrow keys to move through the menu. P ress to enter a menu item. T o exit the menu, press or .
Menu 13 P ress > Date/T ime . • Use the arrow keys on the remote control to move through the selections. • P r ess the keypad to enter numeric values. • Select Apply to save and apply changes. Network Y ou can update the content of your storage card by connecting to DS-Server or InfoSAP Creator.
Menu 14 also remotely control the Digital Signage P rocessor from DS-Server . P ress > Network . When you select the “Static IP” option, the IP , Netmask, Gateway , and DNS are enabled. Enter the necessary information. • Use the arrow keys on the remote control to move through the selections.
Menu 15 Prev iewing a Progr am • Use the Up/Dow n arrow keys to move through the program list. • T o change the page, use the left/right arrow keys. P ress to select and play the file. Ti m e r Y ou can set the timer settings of your Digital Signage P rocessor in the Ti m e r submenu.
Menu 16 P ress > T imer . • Use the arrow keys to move through the options. • P r ess to enable a timer . • Use the keypad to enter numeric values.
Menu 17 Vi de o O ut In the Vi d eo O ut submenu, you can: • Select the video output resolution through DVI, Digital Vid eo , VG A • Set to read video frequency from the connected display P ress > Vid eo O ut .
Menu 18 • 640 x 480 / 60 Hz VGA • 1680 x 1050 / 60 Hz, VESA timing • 1360 x 768 / 60 Hz, VESA timing • 1280 x 1024 / 60 Hz, VESA timing • 1024 x 768 / 60 Hz, VESA timing • 640 x 480 / 60 Hz, VESA timing The default video output resol ution is set at 1024 x 768 @ 60Hz, VGA timing.
Menu 19 Schedule Schedule is the default mode. Select Schedule mo de t o p l ay a program with the scheduling function. S-V ideo Y ou can also select S-Video mode to play back video files directly from your DVD player or TV STB. Network Streaming Y ou can also select Network Streaming mode to get video files through the LAN.
Menu 20 P ress > Play Mode > Slide Show . The content files supported for a slide show are: BMP , JPEG, PNG. Y ou can set the display time from 3 to 60 seconds per slide using the arrow keys to move the slider . The default value is set to 3 seconds.
Menu 21 Vid eo R ep ea t Y ou can also select Video R epeat mode to repeatedly play video files from USB memory . In Video R epeat mode, when you power on the Digital Signage P rocessor , the processor chec ks the USB memory and reads image files to start the show .
Menu 22 P ress > Memory Card . Choosing “De lete All Content Files” deletes all content files in you r SD card. IR Control IR Control refers to the remote control that is included with your Digital Signage P rocessor . In the IR Control submenu, you can lock the remote control to prevent unauthorized users from operating your device.
Menu 23 T o unlock the remote control 1. P ress the following keys on your remote control in order : 2. The message “OSD Menu Unlock” is displayed on the screen to confirm unlocking of the remote control.
Menu 24 T o deactivate the Hidden Menu, turn off your Digital Signage P rocessor . The Hidden Menu is not displayed on the screen on your next power up. Upgr ade P ress > Upgrade . Use the Upgrade submenu to upgrade system files in your Digital Signage P rocessor .
Menu 25 Please refer to the picture below . 3. Select the system driver then press . 4. When the message appears on the screen, select “Y es” and press to start. 5. The Digital Signage P rocessor starts upgrading and displays a message. 6. When the upgrade is complete, a message appears on screen and the Digital Signage P rocessor reboots.
Menu 26 System The System submenu displays system settings and manages setup options. Y ou can: • R eset your Digital Signage P rocessor to its factory settings • Change the password for web access. P ress > System . When you select Factory R eset, a confirmation message appears.
Menu 27 The password must be a 4 to 8 character numeric string. • Enter a new password. • R e-enter to confirm the new password. • Select Apply . Make sure the New P assword and P assword Confirm are the same to ensure successful change of password.
How to Use the Digital Signage Processor 28 How to Use the Digital Signage Processor P owering On Before powering on the Digi tal Signage Processor , insert an SD card in to the SD card slot. After performing the necessa ry connections, you are now ready to power on your Digital Signage P rocessor .
How to Use the Digital Signage Proce ssor 29 Playing media files using U SB memory By default, if Slide Show mode is enabled, the Digital Signage P rocessor first reads the USB memory drive for media content when it boots up. 1. Insert the USB memory drive in the USB slot.
How to Use the Digital Signage Processor 30 The illustration below shows the different content update methods. USB Memory Update A media folder is required for a USB memory update. It must contain the following three files: • Schedule files (.she) • P r ogram files (.
How to Use the Digital Signage Proce ssor 31 Y ou can create content by using InfoSAP Creator. There are two modes for USB update: 1. Mode 1: Delete and copy mode. All content files in the media folder are deleted. The content files in the USB memory are then copied to the SD card.
How to Use the Digital Signage Processor 32 Rewrite through W AN 1. Using DS-Server (optional) Y ou can create schedules via InfoSAP Creator or DS-Server and update them to P rocessors via a DS-Server device. See DS-Server user manual for more information.
Specifications 33 Specifications Internal Stor age The Digital Signage P rocessor us es an SD card for internal storage. The SD card must ha ve only one F A T32 partition. Y our Digital Signage P rocessor supports SD cards with capacities up to 16GB. SD card structure The SD card must have the following files and folders: 1.
Specifications 34 Supported Image F ormats The Digital Signage P rocessor supports BMP , PNG, and JPEG image file formats. • BMP (*.bmp): 24-bpp, R8-G8-B8 • PNG (*.png): 24-bit RGB • JPEG (*.jpg, *.jpeg) Image resolution should be less than 2047 x 2047.
Specifications 35 Video and Audio Specifications 1. Windows Media V ideo 9 (WMV3) • Suppo rts MP@HL (Main P rofile, High Leve l) up to 1280x720p30 or 1920x1080p25 res olution. • Does n ot support CP (Complex P r ofile) • Doe s not support interlaced mode.
Specifications 36 • Suppo rts MP@HL (Main P rofile, High Level) up to 1280x720 p30 or 1920x1080p25 res olution. • Suppo rst AP@L3 (Advanced P rofile, L3 Level) up to 1920x1080i25, 1920x1080p25 or 12 80x720p60 resolution • Does no t support CP (Complex P rofile) • Does not support interlaced mode.
Specifications 37 • Sup ports up to 2.0 Windows Media Audio 9 channels. • Sup ports up to 5.1 Windows Media Au dio 9 P rofessional channels. 7. AAC (MPEG-4 AAC) 8. • Supp orts LC (Low Complexity profile). • Suppo rts bit rates up to 384kbps. • Sup ports up to 5.
Specifications 38 For more information, please check the software’ s User Manual inlcuded in the CD-ROM. Y ou can purchase DS-Server for more powerful Internet functionality . Layout T emp late The Digital Signage P r ocessor supports different types of layouts.
Specifications 39 downward. Images and the tick er can be overlapped. Audio files can be played at the same time. Vi de o + Tick e r A layout can contain a video file and a ticker .
Specifications 40 If you add an audi o file and a video file + image+ticker , the aud io source is set to audio aut omatically . The video file’ s audio tra ck will not be audible. The video, image and tick er can be overlapped. P ortrait Mode In P ortrait Mode, only Video, Streaming, Image, and T icker are supported.
42 Video (2) + Image + T icker The Digital Signage P rocessor supports playback of 2 videos, an image and a ticker . P ossible video combinations inlcude: • Video fi le + S-Video input • Streaming.
Software Limitations T o ensure the output quality of your Digital Signage P rocessor , take note of the following software limitations. Media file • The maximum video/audio file size is 4GB. • T wo images + T wo tickers + T wo video files may be shown simultaneously .
Schedule file (.SHE) • The maximum number of program and control commands in a scheduling file is 500. Firmware • The maximum firmware filename length is 128 bytes. • The on-screen display only can display 35 files or folders in a directory on the USB drive.
The native resolution video input for NTSC is 720 x 480, while P AL is 720 x 576. Normal mode is automatically set for 640 x 480 and 1024 x 768 resolutions. If the resolution is 1920 x 1080, 1360 x 768, 1680 x 1050 or 1280 x 1024, you have to choose between normal and full screen mode.
Hardware Specifications Processor CPU: Sigma SMP863X 8 MB Flash memory 256 MB SDRAM Video Output Resolution DVI: 1920 x 1080 (1080p) / 60hz, VESA timing 1680 x 1050 / 60hz, VESA timing 1360 x 768 / 60.
Wired IR input Mini jack: 2.5 (4 pole) Alternative to IR input P owe r LED Operation: GREEN Standby: RED Reset button System settings reset AC adapter Input AC 240-100V , 47-63hz Output DC 12V 2.5A P ower c ode Japan, 2 pole, 3.0m P ower C onsumption P ower on: T yp 10W (15W max) Standby: 1W max Weight Net weight: 0.
Troubleshooting T roubleshooting Error Messages This section lists common error messages that may arise during the use of the Digital Signage P rocessor , and provides answers and solutions to these errors. Error Message Solutions Player faile d to access the SD Card.
Troubleshooting F AQ’ s This section lists some frequently asked questions (F AQ) and the answers to these problems. Question Answer Why can’t I view my video files? Y ou may be trying to view a video file that is not supported by the Digital Signage P rocessor .
Een belangrijk punt na aankoop van elk apparaat Optoma SignShow D5000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Optoma SignShow D5000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Optoma SignShow D5000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Optoma SignShow D5000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Optoma SignShow D5000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Optoma SignShow D5000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Optoma SignShow D5000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Optoma SignShow D5000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
