Gebruiksaanwijzing /service van het product ECO5100 van de fabrikant Oricom
Ga naar pagina of 44
Oricom eco5100 Series Cor dless phone with integrated answering system DO NOT USE ST ANDARD/ALKALINE BA TTERIES IN THIS PRODUCT , AS THERE IS A RISK OF EXPLOSION AND/OR INJURY . USE ONL Y Ni-MH RECHARGEABLE BA TTERIES AS SPECIFIED IN THIS USER GUIDE. CONT ACT ORICOM FOR REPLACEMENT BA TTERIES.
CONTENTS W ARNINGS AND SAFETY INFORMA TION …………………………………………… 1 Basic Operation …………………………………………………………………………….
Answering Machine Operation ………………………………………………………… 26 Answering machine On / Off ……… 26 Day/Time setting ……………………… 26 Answering mach.
W ARNINGS AND SAFETY INFORMA TION 1 W ARNINGS AND SAFETY INFORMA TION CA UTION Avoid exposure of this telephone to moisture or liquid. T o prevent electric shock, do not open the handset or base cabinet. Do not use the handset in an explosive hazard area such as where there is gas leaking.
2 GETTING ST ARTED Getting Star ted Installation and Charger Installation and Charger 1 . Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply . 2 . Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket.
GETTING ST ARTED 3 W ARNING RISK OF EXPLOSION IF BA TTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries. Use recommended type supplied with this product. Never use alkaline or lithium batteries. Do not dispose of the batteries in a fi re, as they can explode.
4 GETTING ST ARTED P ac k contents P ac k contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly .
GETTING ST ARTED 5 1. T alk 2. Left / Recall / Dial mode 3. Menu 4. Phonebook 5. Right / CID (Caller ID) / Handsfree 6. Inter com 7. Delete / Mute 8. Numeric keys 9. / Ringer Off (On) 10. Ring er Melod y / Ringer V olume / Receiver V olume 11. # / Keypad loc k 12.
6 GETTING ST ARTED Left Arro w / Phonebook records are being revie wed Battery level (3 bars full y charged) Ringer is turned off Speakerphone on Ke ypad lock Connected to telephone line.
GETTING ST ARTED 7 1. P age Page handset 2. OGM (ANS) Recording/Play OGM, Repeat Message 3. Stop / On/Off / ESC Stop action; Activating/Deactivating the answering machine; Exit the current operation mode 4. Delete 5. Time Set Day , Hour , Minute 6. Speaker V olume Down 7.
8 GETTING ST ARTED 2-9/GS (Answering Machine Rings) Bottom Bottom CODE (Answering Machine PIN) 2-9/GS.
BASIC OPERA TION 9 Basic Operation During standby During standby Note: If the power is not connected to the base unit. The cordless handset CANNO T operate. Cordless handset's LCD displa y HANDSET 1 : Handset number : Current battery level : A constant signal icon indicates the cordless handset is linked to the base unit.
10 BASIC OPERA TION Making an external call Making an external call Normal dialling 1 . Press key . 2 . Enter a telephone number . If you enter more than 14 digits, you only see the last 14 digits on the display . 3 . Press key to end the call. Pre-dialling 1 .
BASIC OPERA TION 11 Handset range Handset range Y our eco5100 handset has a range of up to 300 metres outdoors and up to 50 metres indoors, in ideal conditions.
12 BASIC OPERA TION 3 . Repeat steps 1-2 to swap between the two callers. Recall settings are: Australia (100ms, SHOR T) and New Zealand (600ms, LONG).
BASIC OPERA TION 13 Handsfree mode Handsfree mode During talking mode, 1 . Press key to switch to speakerphone mode. 2 . Press key again to cancel this feature. Or During standby mode, 1 . Press and hold key to switch to speakerphone mode. 2 . Press key again to cancel this feature.
14 CALLER ID OPERA TION If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please con- sult your telephone service provider for details).
CALLER ID OPERA TION 15 5 . Press key to con fi rm. The record is now saved into the phonebook. Then it goes back to the call log. Delete one or all CID record(s) Delete one or all CID record(s) Delete one CID record While you are viewing the CID record that you wish to delete, 1 .
16 LNR FUNCTION Redial the last number Redial the last number Y our cordless handset stores the last 3 external numbers dialled, up to 24 digits per number . If the number exceeds 24 digits, the first 24 digits will be stored to memory . During standby mode, 1 .
LNR FUNCTION 17 Store the last number dialled Store the last number dialled While you are viewing a previously dialled number that you wish to save, 1 . Press key . The display on the right is shown. 2 . Press the numeric keys to enter the Name. If you made a mistake, press key to edit it.
18 PHONEBOOK Phonebook Add ne w recor ds Add ne w recor ds Y ou can store up to 50 phonebook records in each handset. Each record can contain up to 24 digits per number and 14 characters per name. During standby mode, 1 . Press and hold key . The display on the right is shown.
PHONEBOOK 19 2 . Press key to erase the last character , or press and hold key to erase the entire characters. 3 . Press key to complete editing the Name and proceed to edit the Number . 4 . Press key to erase the last digit, or press and hold key to erase the entire digits.
20 CORDLESS HANDSET OPERA TION Cor dless Handset Operation Handset ringer adjustment Handset ringer adjustment Handset ringer melody During standby mode, 1 . Press and hold key . fl ashes and the current melody option appears. 2 . Press or key to select the melody option (1 to 9 for adjustment) .
CORDLESS HANDSET OPERA TION 21 Multi-handset Operation Multi-handset Operation Y our eco5100 can have up to 4 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side of the display .
22 CORDLESS HANDSET OPERA TION Call transfer between cor dless handsets When there is an incoming external call, 1 . Press INT key . The display on the right is shown. 2 . Key the handset number (1, 2, 3, or 4) you wish to transfer . 3 . Press key to exit Intercom mode and return to standby mode.
CORDLESS HANDSET OPERA TION 23 Registration Registration Register new handsets on the eco5100 base The handsets which come in the same pack are already registered to the base. If you buy new handsets. Y ou need to register them before use. 1 . Charge the batteries (for 15 hours).
24 CORDLESS HANDSET OPERA TION 3 . Press key to con fi rm. The display on the right is shown. 4 . Enter the default value 0000. 5 . Press key to con fi rm and the display on the right is shown. 6 . Press the numeric keys (1-4) to enter the handset number .
CORDLESS HANDSET OPERA TION 25 Base V olume Base V olume During standby mode, 1 . Press key . 2 . Press or key to select “ BS V OLUME ” from the display . 3 . Press key to enter the mode. 4 . Press or key to select volume levels. There are 5 levels and of f for selection.
26 ANSWERING MA CHINE OPERA TION Answering mac hine On / Off Answering mac hine On / Off During standby mode, 1 . Press and hold key to switch the answering machine off. “ Answering off ” will be heard followed by two short beeps. Note: During Off mode, the answering machine is set to Announcement T wo mode automatically .
ANSWERING MA CHINE OPERA TION 27 6 . Press or MEMO key to select minutes. V oice prompt at each selection will be heard. 7 . Press key to con fi rm setting and go back to standby or off mode.
28 ANSWERING MA CHINE OPERA TION 2 . Press or MEMO key to select a new fi rst digit and press CODE button to con fi rm. Y ou will hear the second digit, eg: 2. 3 . Press or MEMO key to select a new second digit and press the CODE but- ton to con fi rm.
ANSWERING MA CHINE OPERA TION 29 2 . Press and hold key until you hear a long beep and see light fl ash. 3 . Speak into the microphone (15cm from the base unit’s microphone). 4 . Press key to stop recording, the machine will play back recording for review .
30 ANSWERING MA CHINE OPERA TION ICM (Incoming Messages) ICM (Incoming Messages) Record ICM During OGM 1 mode, the machine can record callers’ messages. During recording mode, the light will flash. The machine will stop automatically after recording 2 minutes.
ANSWERING MA CHINE OPERA TION 31 Memo Memo Record memo Y ou can record memos for other users of the unit to hear . The maximum recording time is 2 minutes. During standby mode, 1 . Press and hold MEMO key until you hear a long beep. 2 . Speak into the microphone after the beep.
32 ANSWERING MA CHINE OPERA TION Delete all messages While the unit is in standby mode, you can delete all the old messages but not new messages. Press and hold X key until you hear a long beep, and then “ All message erased ” will be heard. It means that the old messages will be deleted, but the new messages will not be deleted.
AD V ANCED ANSWERING SYSTEM 33 Remote control Remote control Y ou can access your answering machine when you are away by using any touch tone phone. Y ou have to enter the Security PIN to access the answering machine. The de- fault PIN is 321 (Refer to “Answering machine PIN Number Setting” on P27) .
34 AD V ANCED ANSWERING SYSTEM Remote operation keys Keys on remote phone ke ypad Operation 1 Replay the current message 1 (Press twice) Skip back to the previous message 2 Play new messages /Pause du.
35 If you feel this product is not working correctly please consult the user guide and en- sure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket.
36 APPENDIX Problem P ossible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected. 2. T oo far from the base unit. 3. Battery charge is low . 4. Incorrect battery polarity . 5. Re-register handset. 1. Check CONNECTION to power and telephone line.
APPENDIX 37 Problem P ossible cause(s) Solution(s) Phone does not ring when a call comes in. 1. The ringer is off. 2. T oo many phones are sharing the same phone line. 3. Base unit not plugged in. 1. T urn ON the ringer . 2. Disconnect some of the phones from the phone line.
38 APPENDIX Phone – Oricom eco5100 Specifi cations Frequency range 1.88-1.897 GHz (bandwidth=20MHz) Channel bandwidth 1.728 MH Operating range Up to 300m outdoors, up to 50m indoors Standby time Up.
APPENDIX 39 W arranty Inf ormation (A ustralia) W arranty Inf ormation (A ustralia) (a) W arranty . Oricom warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase.
40 APPENDIX Notes for operation in Ne w Zealand Notes for operation in Ne w Zealand The grant of a T elepermit for any item of terminal equipment indicates only that T elecom has accepted that the item complies with the minimum conditions for connection to its network.
A ustralia Oricom International Pty Ltd Locked Bag 658, South Windsor NSW 2756, Australia Email: support@oricom.com.au Web: www .oricom.com.au Fax: (02) 4574 8888 Ph: 1300 889 785 Customer Support T o view the full Oricom range, please visit the Oricom website: www .
Een belangrijk punt na aankoop van elk apparaat Oricom ECO5100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Oricom ECO5100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Oricom ECO5100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Oricom ECO5100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Oricom ECO5100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Oricom ECO5100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Oricom ECO5100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Oricom ECO5100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
