Gebruiksaanwijzing /service van het product M5A78L-M LX PLUS van de fabrikant Asus
Ga naar pagina of 64
Motherboard M5A78L-M LX.
ii Copyright © 201 1 ASUST eK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a .
iii Contents Notices ......................................................................................................... vi Safety information ..................................................................................... vii About this guide .
iv Contents 1.1 1 Software support ........................................................................ 1-27 1.1 1.1 Installing an operating system ...................................... 1-2 7 1.1 1.2 Support DVD information ......................
v Contents 2.5.3 ACPI APIC Support [Enabled] ....................................... 2-1 7 2.5.4 APM Conguration ........................................................ 2-1 7 2.5.5 HW Monitor Conguration ........................................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste.
viii Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.
ix M5A78L-M LX specications summary (continued on the next page) CPU AMD ® Socket AM3+ for AMD ® FX™ / Phenom™ II / Athlon™ II / Sempron™ 100 series processors AMD ® Cool ‘n’ Quiet™ 2.0 T echnology (depending on CPU type) Supports CPU up to 95W * 32nm AM3+ CPU is supported by BIOS version 0401 and later .
x M5A78L-M LX specications summary Back panel I/O ports 1 x PS/2 Keyboard port 1 x PS/2 Mouse port 1 x COM port 1 x LPT port 1 x D-Sub port 1 x LAN (RJ-45) port 4 x USB 2.0/1.1 ports 3 x Audio jacks Internal I/O connectors 3 x USB 2.0/1.1 connectors support additional 6 USB 2.
1.2 Package contents Check your motherboard package for the following items. Motherboard ASUS M5A78L-M LX motherboard Cables 2 x Serial A T A cables Accessories 1 x I/O shield Application DVD ASUS motherboard Support DVD Documentation User Manual If any of the above items is damaged or missing, contact your retailer .
HyperT ransport™ 3.0 support HyperT ransport™ 3.0 technology provides 2.6 times more bandwidth than HT1.0 that radically improves system efciency for a smoother and faster computing environment.
1.3.2 Innovative ASUS features 1 2 Core Unlocker ASUS Core Unlocker simplies the activation of a latent AMD ® CPU- with just pressing a key . Enjoy an instant performance boost by simply unlocking the extra cores, without performing complicated BIOS changes.
C.P .R. (CPU Parameter Recall) The BIOS C.P .R. feature automatically restores the CPU default settings when the system hangs due to overclocking failure.
1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
M5A78L-M LX 1.5 Motherboard overview 1.5.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below .
1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots Page Connectors/Jumpers/Slots Page 1. Keyboard power (3-pin KBPWR) 1-19 8. System panel connector (10-1 pin F_P ANEL) 1-24 2. USB device wake-up (3-pin USBPW1-4, USBPW5-10) 1-19 9.
1.6 Central Processing Unit (CPU) This motherboard comes with an AM3+ socket designed for FX™ / Phenom™ II / Athlon™ II / Sempron™ 100 series processors. 1.6.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. 2.
5. When the CPU is in place, push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. 6. Install a CPU heatsink and fan following the instructions that comes with the heatsink package. Y ou can also refer to section 1.
1.6.2 Installing the heatsink and fan Ensure that you use only AMD-certied heatsink and fan assembly . T o install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, ensuring that the heatsink ts properly on the retention module base.
3. Align the other end of the retention bracket to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly ts the retention mechanism module base, otherwise you cannot snap the retention bracket in place.
1.7.2 Memory congurations Y ou may install 512MB, 1GB, 2GB, and 4GB unbuffered ECC and non-ECC DDR3 DIMMs into the DIMM sockets. • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration.
DDR3-1600(O.C.) MHz capability (continued on the next page) V endor Part No. Size SS/ DS Brand Chip NO. Timing DIMM (BIOS) V oltage DIMM Support A* B* G.SKILL F3-12800CL9D-2GBNQ 2048MB(Kit of 2) SS N/A Heat-Sink Package 9-9-9-24 1.5V~1.6V • • G.SKILL F3-12800CL8T -6GBHK 2048MB DS N/A Heat-Sink Package 8-8-8-21 1.
DDR3-1333 MHz capability V endor Part No. Size SS/ DS Brand Chip NO. Timing DIMM (BIOS) V oltage DIMM Support A* B* G.SKILL F3-10600CL8D-2GBHK 1024MB SS G.SKILL Heat-Sink Package • G.SKILL F3-10600CL9D-2GBPK 1024MB SS G.SKILL Heat-Sink Package • • G.
DDR3-1066 MHz capability V endor Part No. Size SS/ DS Brand Chip NO. Timing DIMM (BIOS) V oltage DIMM Support A* B* Crucial CT12864BA1067.8FF 1024MB SS Micron 9GF22D9KPT 7 • • Crucial CT12872BA1067.9FF 1024MB SS Micron 9HF22D9KPT(ECC) 7 • • Crucial CT25664BA1067.
1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1.9 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords.
2. USB device wake-up (3-pin USBPW1-4, USBPW5-10) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
1.10 Connectors 1.10.1 Rear panel ports 1. PS/2 Mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer , a scanner, or other devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
7. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports connect to USB 2.0 devices. 8. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports connect to USB 2.0 devices. 9. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices.
2. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for an A TX power supply . The plugs from the power supply are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
3. Serial A T A connectors (7-pin SA T A1, SA T A2, SA T A3, SA T A4, SA T A5, and SA T A6) These connectors are for the Serial A T A signal cables for Serial A T A 3Gb/s hard disk and optical disk drives. The Serial A T A 3Gb/s is backward compatible with Serial A T A 1.
4. System panel connector (10-1 pin F_P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED.
6. USB connectors (10-1 pin USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.
8. CPU and chassis fan connectors (4-pin CPU_F AN and 3-pin CHA_F AN) Conn ect the f an ca bles to th e fan con necto rs on the mothe rboa rd, ens uring th at th e blac k wi re of each cabl e mat ches the groun d pin of t he co nnec tor. Only the 4-pin CPU fan connector supports the ASUS Q-Fan feature.
1.1 1 Software support 1.1 1.1 Installing an operating system This motherboard supports Windows ® XP/Vista/7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary .
Chapter 1: Product introduction 1-28.
ASUS M5A78L-M LX 2-1 Chapter 2 BIOS information 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility .
2-2 Chapter 2: BIOS information Updating from a BIOS file a. Select Update BIOS from a le , then click Next . b. Locate the BIOS le from the Open window , then click Open . 3. Follow the onscreen instructions to complete the updating process. T o update the BIOS using EZ Flash 2: 1.
ASUS M5A78L-M LX 2-3 2.1.3 ASUS CrashFree BIOS 3 ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupted BIOS le using the motherboard support DVD or a USB ash drive that contains the BIOS le.
2-4 Chapter 2: BIOS information 2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or congure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.
ASUS M5A78L-M LX 2-5 2.2.1 BIOS menu screen 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration Advanced For changing the a.
2-6 Chapter 2: BIOS information 2.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, T ools, and Exit) on the menu bar have their respective menu items.
ASUS M5A78L-M LX 2-7 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and how to navigate through them.
2-8 Chapter 2: BIOS information LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting this item to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.
ASUS M5A78L-M LX 2-9 2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
2-10 Chapter 2: BIOS information Processor Frequency Multiplier [Auto] Sets the processor frequency multiplier . Conguration options: [Auto] [x4.0 800MHz] [x4.5 900MHz] [x5.0 1000MHz] [x5.5 1 100MHz] ~ [x13.0 2600MHz] [x13.5 2700MHz] [x14.0 2800MHz] [x14.
ASUS M5A78L-M LX 2-1 1 VDDNB Over V oltage [Auto] Sets the VDDNB over voltage. The valid value ranges vary depending on your CPU model. Use <+> / <-> keys to adjust the ratio. Conguration options: [Auto] LoadLine Calibration [Auto] Sets the LoadLine.
2-12 Chapter 2: BIOS information DRAM READ to PRE T ime [Auto] Conguration options: [Auto] [4 CLK] [5 CLK] [6 CLK] [7 CLK] DRAM Row Cycle T ime [Auto] Conguration options: [Auto] [1 1 CLK] ~ [41.
ASUS M5A78L-M LX 2-13 GART Error Reporting [Disabled] This option should remain disabled for the normal operation. The driver developer may enable it for testing purpose. Conguration options: [Disabled] [Enabled] Microcode Updation [Enabled] Enables or disables Microcode Updation.
2-14 Chapter 2: BIOS information ECC Conguration ECC Mode [Disabled] Allows you to set the ECC mode. Conguration options: [Disabled] [Basic] [Good] Internal Graphics Primary Video Controller [GFX0-GPP-IGFX-PCI] Selects the primary display adapter .
ASUS M5A78L-M LX 2-15 2.4.4 Onboard Device Conguration Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Conguration options: [Disabled] [3F8/IRQ4][2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Parallel Port Address [378] Allows you to select the Parallel Port base addresses.
2-16 Chapter 2: BIOS information 2.4.6 USB Conguration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. The Module V ersion and USB Devices Enabled items show the auto-detected values.
ASUS M5A78L-M LX 2-17 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Conguration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
2-18 Chapter 2: BIOS information 2.5.5 HW Monitor Conguration CPU T emperature [xxxºC/xxxºF] or [Ignored] MB T emperature [xxxºC/xxxºF] or [Ignored] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures.
ASUS M5A78L-M LX 2-19 2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the submenu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
2-20 Chapter 2: BIOS information AddOn ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Conguration options: [Force BIOS] [Keep Current] Bootup Num-Lock [On] Selects the power-on state for the NumLock.
ASUS M5A78L-M LX 2-21 Change User Password Select this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed . After you set a password, this item shows Installed . T o set a User Password: 1.
2-22 Chapter 2: BIOS information 2.7 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.
ASUS M5A78L-M LX 2-23 Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System T ime, and Password, the BIOS asks for a conrmation before exiting.
2-24 Chapter 2: BIOS information.
ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
Een belangrijk punt na aankoop van elk apparaat Asus M5A78L-M LX PLUS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus M5A78L-M LX PLUS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus M5A78L-M LX PLUS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus M5A78L-M LX PLUS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus M5A78L-M LX PLUS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus M5A78L-M LX PLUS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus M5A78L-M LX PLUS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus M5A78L-M LX PLUS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
