Gebruiksaanwijzing /service van het product TFTV1920D van de fabrikant Palsonic
Ga naar pagina of 40
LCD TV COMBO TFTV1920D USER'S MANUAL.
Table Of Contents Important Safety Instructions -------------------------------------------------------- Characteristic Features ---------------------------------------------------------------- Disc I.
Important Safety Instructions 1 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 2 Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth.
Characteristic Features 3 This product incorporates DVD player, LCD display and TV receiver in one system. Multiple Mode TV mode CVBS mode S-VIDEO mode COMPOSITE mode VGA mode DVD mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines.
Disc Information 4 Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by the software maker.
Front Panel 5 1. 2. 3. 4. 5. 6. 7. 19" colour TFT screen 19" colour TFT screen clearly show the data. SOURCE button Press to select mode among TV, CVBS, S-VIDEO, COMPONENT, VGA and DVD. In setup menu, the same function as ENTER button. MENU button Press to enter or return to the previous setup menu.
Front and Right Side Panel 6 8. 9. 10. 11. 12. 13. 14. 15. 16. Eject button Press to eject the disc out in DVD mode. Power button Press to enter or exit the standby mode. SD/MS/MMC Card Port Insert the SD, MS or MMC card into the port. Disc Tray Slot Used to load disc.
Left Side Panel 7 1. 2. 3. 4. Y/Pb/Pr Input Jack Connected to the Y/Pb/Pr input in COMPONENT mode. Y/Pb/Pr L/R Audio Input Jack Connected to the L/R audio input in COMPONENT mode. Composite Audio/Video Output Jack In the CVBS mode, connected to output the Audio/Video signals.
Remote Control 8 Using of Remote control Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. The operating distance may vary depending to the brightness around. Notes: Do not point bright lights directly at the remote control sensor.
Remote Control 9 Remote Control Drawing 1. 2. 3. 4. POWER button Press to turn on or off this unit. TV button Press to shift to TV mode. DVD button Press to shift to DVD mode. P.M. button Press to shift the screen picture modes among User, Standard, Soft, Bright and Shine.
Remote Control 10 MENU button (under DVD mode) Press to enter disc menu when in DVD mode. Under teletext mode, press to disable teletext display and press again to resume. SETUP button Press to open DVD setup menu when in DVD mode. Under teletext mode, press to display the index page.
System Connections 11 Before connections, disassemble the jack cover first. Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables.
System Connections 12 Connecting External AV Signal Source (YPbPr) Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the side panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the SOURCE button to shift to COMPONENT mode.
System Connections 13 Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect. 1. 2. 3. Connect one end of the VGA cable to the VGA input jack on the side panel and the other end to the PC.
System Connections 14 Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the side panel. After connection, turn on the power of the unit.
TV Function 15 NOTE: In other mode, you can refer to the following instructions in TV mode to go on with some settings. Only when there are signals, the menus can appear and be set. Preparation 1. 2. After connection, press the POWER button to turn on the power.
TV Function 16 Brightness Setup Press the button to select Brightness and press the button to adjust the value . Press the MENU button to return to the previous menu. Contrast Setup Press the button to select Contrast and press the button to adjust the value.
TV Function 17 When the VGA signal is connected to the unit, the Advanced setup menu is shown below: Press the " " button to select the desired item and press the "ENTER" button to enter it's setup menu. Press the "MENU" button to return to the previous menu.
TV Function 18 Audio Setting Press the MENU button once to enter the setup menu. Press the button to select Audio and press the ENTER button to enter the menu shown on the right. In the Audio setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu.
TV Function 19 Setup Setting Press the MENU button once to enter the setup menu. Press the button to select Setup and press the ENTER button to enter the menu shown on the right. In the Setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu.
Channel Name Press the button to select the Channel Name and press the ENTER button to enter. Then press the button to select letters or press the number button to input numbers. Press the MENU button to return to the previous menu. Skip Press the button to select Skip and press the ENTER button to activate or cancel this function.
TV Function 21 Manual Install Press the button to select the Manual Install and press the ENTER button to enter the menu shown on the right. In the Manual Install setup menu, press the button to select the desired item. Press the MENU button to return to the previous menu.
TV Function 22 Language Press the button to select the Language , press the ENTER button to enter the setup, press the button to select item. Press the MENU button to return to the previous menu. Factory Reset Press the button to select the Factory Reset and press the ENTER button to enter.
NICAM Function 23 Mono Nicam Mono Mono Stereo The unit support NICAM function under TV mode. Under NICAM TV broadcast: 1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will appear corresponding display as shown below: 2.
DVD Playback Operation 24 Preparation: After connections, turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. 2. 3. 4. Press the POWER button to turn on the power. Press the SOURCE button and select DVD, press the ENTER button to confirm and shift to DVD mode.
DVD Playback Operation 25 Pause Press the PAUSE button once to pause the playback; press it repeatedly to start step-by-step playback. Press the PLAY button to resume normal playback.
DVD Playback Operation 26 GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items and press the ENTER button to enter and use the direction buttons to select the desired item.
DVD Playback Operation 27 Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo.
DVD Playback Operation 28 Previous and Next During playback, press the or button to select picture. Menu Press the MENU button once to stop playback and return to the root menu. GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number.
USB and SD/MS/MMC Card Function 29 USB and SD/MS/MMC Card Function Preparation: 1. 2. 3. 4. Connect the unit to the power supply. Press the POWER to turn on the unit. Press the SOURCE button to shift to DVD mode. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit.
DVD System Setup 30 - - General Setup Page - - TV Display Angle Mark OSD Lang Captions Screen Saver Last Memory Media Center Go To General Setup Page Preparations 1. 2. 3. 4. 5. Connect to the power supply and turn on the unit. Press the SOURCE button to shift to DVD mode.
DVD System Setup 31 OSD Lang Captions Screen Saver Last Memory The item is used to select the OSD language. 1. 2. 3. 4. Press the direction buttons to select OSD Lang . Press the ENTER button to enter the setup. Use the direction buttons to select items.
DVD System Setup 32 Media Center 1. 2. 3. 4. Press the direction buttons to select Media Center . Press the ENTER button to enter the setup. Use the direction buttons to select DVD, USB, SD/MMC or MS. Press the ENTER button again to confirm selection and return.
DVD System Setup 33 HDCD Setup In the Audio Setup Page, use the direction buttons to select HDCD Setup. Press the ENTER button to enter the setup and the screen will display as below: 1. 2. 3. 4. In the menu, press the ENTER button to enter the setup.
DVD System Setup 34 Sharpness Preference Setup Press the SETUP button to enter the General setup menu, then use the direction buttons to select Preference Page, the screen will display as the below: In the menu, press the direction button to enter the desired item.
DVD System Setup 35 Disc Menu Default 1. 2. 3. 4. Press the direction buttons to select Disc Menu . Press the ENTER button to enter the setup, see the left figure: Press the direction buttons to select Menu language. Press the ENTER button again to confirm setting and return.
Troubleshooting 36 SYMPTOM CHECK ITEM The player cannot play. Make sure disc tray is closed Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc.
Specifications 37 TFT-LCD Resolution 1440 x 900 TFT-LCD Screen Size 19 inches Power AC100~240V, 50/60Hz DC 12V 5A Power Consumption < 60W Dimension 494mm x 184mm x 412mm (LxWxD) Weight About 9.2 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Een belangrijk punt na aankoop van elk apparaat Palsonic TFTV1920D (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Palsonic TFTV1920D heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Palsonic TFTV1920D vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Palsonic TFTV1920D leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Palsonic TFTV1920D krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Palsonic TFTV1920D bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Palsonic TFTV1920D kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Palsonic TFTV1920D . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
