Gebruiksaanwijzing /service van het product P1P5945GCBLK van de fabrikant Asus
Ga naar pagina of 92
P1-P5945G/P2-P5945G ASUS PC (Desktop Barebone) User Guide.
i i Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a r.
iii Table of contents Notices ................................................................................................ vi Safety information ..............................................................................vii About this guide ...
i v Table of contents Chapter 3: Starting up 3.1 Installing an operating system .............................................. 3-2 3.2 Powering up .......................................................................... 3-2 3.3 Support CD information .
v Table of contents 5.3 Main menu ........................................................................... 5-13 5.3.1 System Time ........................................................ 5-13 5.3.2 System Date ......................................
v i Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide Audience This guide provides general information and installation instructions about the ASUS P1-P5945G/P2-P5945G system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers.
i x Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task.
x System package contents Check your P1-P5945G/P2-P5945G system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item description 1. ASUS book size barebone system with • ASUS motherboard • 200W power supply unit • PCI riser card • CPU fan and heatsink assembly 2.
A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Chapter 1 System introduction This chapter gives a general description of the ASUS P1- P5945G/P2-P5945G. The chapter lists the system features including introduction on the front and rear panel, and internal components.
1-2 Chapter 1: System introduction 1.1 Welcome! Thank you for choosing the ASUS P1-P5945G/P2-P5945G! The ASUS P1-P5945G/P2-P5945G is an all-in-one barebone system with a versatile home entertainment feature.
1 - 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Open 10 1 1 12 7 8 9 14 13 1. Optical drive eject button. 2. HDD LED. This LED lights up when data is read from or written to the hard disk drive. 3. Optical drive bay cover. 4. Press to open the front panel cover.
1-4 Chapter 1: System introduction 1.3 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 1. Power connector 2. Voltage selector. This switch allows you to adjust the system input voltage according to the voltage supply in your area.
1 - 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 11. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. 12. USB 2.0 ports 1, 2, 3 and 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.
1-6 Chapter 1: System introduction 1.4 Internal components The illustration below is the internal view of the system when you remove the top cover and the power supply unit. The installed components are labeled for your reference. Proceed to Chapter 2 for instructions on installing additional system components.
A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Chapter 2 Basic installation This chapter provides step-by-step instructions on how to install components in the system.
2-2 Chapter 2: Basic installation 2.1 Preparation Before you proceed, make sure that you have all the components you plan to install in the system. Basic components to install 1. Central Processing Unit (CPU) 2. DDR2 Dual Inline Memory Module (DIMM) 3.
2-3 ASUS Pundit P1-P5945G/P2-P5945G 2.3 Removing the chassis cover and front panel assembly To remove the chassis cover: 1. Remove the cover screws. Keep the screws for later use. 2. Pull the cover slightly toward the rear panel. 3. Lift the cover, then set aside.
2-4 Chapter 2: Basic installation 2.4 Central Processing Unit (CPU) 2.4.1 Overview The motherboard comes with a surface mount LGA775 socket designed for the Intel ® Pentium ® 4 processor in the 775-land package. • Check your motherboard to make sure that the PnP cap is on the CPU socket and the socket contacts are not bent.
2-5 ASUS Pundit P1-P5945G/P2-P5945G To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab.
2-6 Chapter 2: Basic installation 2.4.4 Removing and Installing the CPU fan and heatsink assembly The system package includes a proprietary CPU fan and heatsink assembly to ensure optimum thermal condition and performance.
2-7 ASUS Pundit P1-P5945G/P2-P5945G 2.5 Installing a DIMM The system motherboard comes with two Double Data Rate 2 (DDR2) Dual Inline Memory Module (DIMM) sockets. The following gure illustrates the location of the sockets: • Install only identical (the same type and size) DDR2 memory modules.
2-8 Chapter 2: Basic installation Size Vendor Model S i d e ( s ) Component A B Qualified Vendors Lists (QVL) D D R 2 - 5 3 3 DIMM Support Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-channel memory conguration.
2-9 ASUS Pundit P1-P5945G/P2-P5945G D D R 2 - 6 6 7 Size Vendor Model S i d e ( s ) Component A B DIMM Support 256MB Kingston KVR667D2N5/256 SS E2508AB-6E-E v v 512MB Kingston KVR667D2N5/512 SS D6408T.
2-10 Chapter 2: Basic installation 2.5.3 Removing a DDR2 DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. 2. Remove the DIMM from the socket. Support the DIMM lightly with your ngers when pressing the retaining clips.
2-11 ASUS Pundit P1-P5945G/P2-P5945G 2.6 Expansion slots This mother board provides two PCI expansion slots, which locate on the PCI raiser card that is connected to its slot on the motherboard. 2.6.1 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, andother cards that comply with PCI specications.
2-12 Chapter 2: Basic installation 2. Remove the metal cover opposite the slot that you intend to use. 3. Insert the card connector to the slot, then press the card rmly until it ts in place. Secure the card with a screw. 4 . Re in st al l th e PC I ri se r ca rd a ss em bl y.
2-13 ASUS Pundit P1-P5945G/P2-P5945G * These IRQs are usually available for ISA or PCI devices. When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conicts will arise between the two PCI groups, making the system unstable and the card inoperable.
2-14 Chapter 2: Basic installation 2.7 Installing an optical drive and reinstalling the storage drive assembly Refer to the instructions in this section if you wish to install a new optical drive. Follow these steps to install an optical drive: 1. Turn the storage drive assembly upside down with the 3.
2-15 ASUS Pundit P1-P5945G/P2-P5945G Before reinstalling the storage drive assembly, connect the IDE/SATA and power plugs to the IDE/SATA and power connectors at the back of the drives. 1. Connect the black plug of the IDE cable to the optical drive, then the gray plug to the hard disk drive.
2-16 Chapter 2: Basic installation 2.8 Installing the foot stand To install the foot stand: 1. Match the foot stand hooks to the holes on the chassis. 2.
2-17 ASUS Pundit P1-P5945G/P2-P5945G 2.9 Reinstalling the front panel cover 1. Insert the front panel cover tabs to the holes at the right side of the chassis, then close. 2. Insert the front panel cover hooks to the chassis tabs until the front panel cover ts in place.
2-18 Chapter 2: Basic installation 2.9 Reinstalling the cover To reinstall the cover: 1 . In s ta l l t he co v er to th e c h as s is . M ak e s u re th e c o ve r t a bs t t he ch a ss i s r ai l s. 2. Push the cover toward the front panel until it ts in place.
A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Chapter 3 Starting up This chapter helps you power up the system and install drivers and utilities from the support CD.
3-2 Chapter 3: Starting up 3.1 Installing an operating system The barebone system supports Windows ® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
3 - 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 3.3.1 Running the support CD To begin using the support CD, place the CD in your optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the le ASSETUP.
3-4 Chapter 3: Starting up 3.3.2 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll-Installation Wizard for Utilities I n s t a l l s t h e A S U S I n s t A l l - I n s t a l l a t i o n W i z a r d U t i l i t i e s .
3 - 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 3.3.3 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide.
3-6 Chapter 3: Starting up 3.4 Software information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software for more information.
3 - 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Button Function Opens the Conguration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component.
3-8 Chapter 3: Starting up Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small).
3 - 9 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below. Large display Small display WMI browser Click to display the WMI (Windows Management Instrumentation) browser.
3-10 Chapter 3: Starting up PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information.
3 - 1 1 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Memory usage The Memory tab shows both used and available physical memory. The pie chart at the bottom of the window represents the used (blue) and the available physical memory. Configuring PC Probe II Click to view and adjust the sensor threshold values.
A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Chapter 4 Motherboard info This chapter gives information about the motherboard that comes with the system.
4-2 Chapter 4: Motherboard info 4.1 Introduction The Pundit P1-P5945G/P2-P5945G barebone system comes with an ASUS motherboard. This chapter provides technical information about the motherboard for future upgrades or system reconguration. 4.2 Motherboard layout 33.
4 - 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 4.3 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
4-4 Chapter 4: Motherboard info 2. USB device wake-up (3-pin USBPW12, USBPW34, U S B P W 7 8 ) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
4 - 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar).
4-6 Chapter 4: Motherboard info 2 IDE connectors (40-1 pin PRI_IDE) The onboard IDE connectors are for Ultra DMA 100/66/33 signal cable(s). There are three connectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray.
4 - 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! 4. USB connector (5-1 pin USB7) This connector is for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
4-8 Chapter 4: Motherboard info 5. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The plugs from the power supply are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
4 - 9 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 7. Back audio connector (20-1 pin Back_Audio Connector) We recommend that you connect a high-denition front panel audio module to this connector to avail of the motherboard’s high-denition audio capability.
4-10 Chapter 4: Motherboard info 9. System panel connector (6 pin PANEL) This connector supports several chassis-mounted functions. The system panel connector is color-coded for easy connection. Refer to the connector description below for details. • System power LED (2-pin PLED) This 3-pin connector is for the system power LED.
1 Chapter 5 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters..
5-2 Chapter 5: BIOS setup 5.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS EZ Flash (Updates the BIOS using the motherboard support CD during POST.
5 - 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable USB Flash with the updated BIOS le.
5-4 Chapter 5: BIOS setup Updating the BIOS file To update the BIOS le using the AFUDOS utility: 1. Visit the ASUS website (www.asus.com) and download the latest BIOS le for the motherboard. Save the BIOS le to a bootable USB Flash. 2. Copy the AFUDOS utility (afudos.
5 - 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
5-6 Chapter 5: BIOS setup Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1. Insert the support CD to the optical drive. The utility automatically checks the optical drive for the original or updated BIOS le. The utility then updates the corrupted BIOS le.
5 - 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update. 3. The ASUS Update utility is copied to your system.
5-8 Chapter 5: BIOS setup 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
5 - 9 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Updating the BIOS through a BIOS file To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
5-10 Chapter 5: BIOS setup 5.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup”.
5 - 1 1 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. 5.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For chan.
5-12 Chapter 5: BIOS setup 5.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items.
5 - 1 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 5.3.1 System Time [xx:xx:xxxx] Allows you to set the system time.
5-14 Chapter 5: BIOS setup 5.3.3 Primary and Third IDE Master/Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.
5 - 1 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G PIO Mode [Auto] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode.
5-16 Chapter 5: BIOS setup Enhanced Mode Support On [S-ATA] The default setting S-ATA allows you to use native OS on Serial ATA and Parallel ATA ports.
5 - 1 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.3.5 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu.
5-18 Chapter 5: BIOS setup 5.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
5 - 1 9 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G The following item appears only when you set the AI Overclocking item to [Overlock Prole]. Overlock Options [Overlock 5%] Conguration options: [Overlock 5%] [Overlock 10%] USB Function [Enabled] Allows you to enable or disable the USB function.
5-20 Chapter 5: BIOS setup Do not disable the BIOS EHCI Hand-Off option if you are running a Windows ® operating system with USB device. BIOS EHCI Hand-off [Enabled] Allows you to enable support for operating systems without an EHCI hand-off feature.
5 - 2 1 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.4.3 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Congure Advanced CPU settings Manufacturer: Intel Brand String: Genuine Intel(R) CPU 3.
5-22 Chapter 5: BIOS setup Max CPUID Value Limit [Disabled] Enable this item to boot legacy operating systems that cannot support CPUs with extended CPUID functions. Conguration options: [Disabled] [Enabled] Execute Disable Function [Disabled] Enables or disables the Execute Disable function.
5 - 2 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.4.4 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.
5-24 Chapter 5: BIOS setup 5.4.5 Onboard Devices Configuration Congure Win627EHF Super IO Chipset HD Audio Controller [Enabled] Onboard 1394 Controller [Enabled] Onboard PCIEX GbE LAN [Enabled] LAN.
5 - 2 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G LAN Option ROM [Disabled] Allows you to enable or disable the option ROM in the onboard LAN controller.
5-26 Chapter 5: BIOS setup 5.4.6 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
5 - 2 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specic IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices. Conguration options: [PCI Device] [Reserved] 5.
5-28 Chapter 5: BIOS setup 5.5.4 APM Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Enabled or disable APM.
5 - 2 9 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Power On By PCIE Devices [Disabled] When set to [Enabled], this parameter allows you to turn on the system through a PCI Express LAN card. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
5-30 Chapter 5: BIOS setup 5.5.5 Hardware Monitor Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Hardware Monitor AI Quiet [Disabled] CPU Temperature [51ºC/122.5ºF] MB Temperature [41ºC/105.5ºF] CPU Fan Speed (RPM) [2481 RPM] CPU Q-Fan Control [Disabled] VCORE Voltage [ 1.
5 - 3 1 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G 5.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Boot Settings Boot Device Priority Removable Drives Boot Settings Conguration Security 5.
5-32 Chapter 5: BIOS setup 5.6.3 Boot Settings Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Boot Settings Conguration Quick Boot [Enabled] Ful.
5 - 3 3 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G If you forget your BIOS password, you can clear clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for information on how to erase the RTC RAM. Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
5-34 Chapter 5: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
5 - 3 5 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system.
5-36 Chapter 5: BIOS setup Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System Time, and Password, the BIOS asks for a conrmation before exiting.
5 - 3 7 A S U S P 1 - P 5 9 4 5 G / P 2 - P 5 9 4 5 G.
Een belangrijk punt na aankoop van elk apparaat Asus P1P5945GCBLK (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus P1P5945GCBLK heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus P1P5945GCBLK vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus P1P5945GCBLK leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus P1P5945GCBLK krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus P1P5945GCBLK bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus P1P5945GCBLK kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus P1P5945GCBLK . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
