Gebruiksaanwijzing /service van het product P5PL2-E van de fabrikant Asus
Ga naar pagina of 116
Motherboard P5PL2-E.
i i E2860 First Edition December 2006 Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, trans.
iii Contents Notices ................................................................................................ vi Safety information ..............................................................................vii About this guide ............
i v Contents 2.7 Connectors ......................................................................... 2-21 2.7.1 Rear panel connectors .......................................... 2-21 2.7.2 Internal connectors ..........................................
v Contents 4.4.2 USB Conguration ................................................. 4-22 4.4.3 CPU Conguration ................................................. 4-23 4.4.4 Chipset ..................................................................
v i Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
i x Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. Typography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
x P5PL2-E specications summary (continued on the next page) LGA775 socket for Intel ® Core™ 2 Duo/Intel ® Pentium ® D/Intel ® Pentium ® 4/Intel ® Celeron ® D processors Supports Intel ® n.
x i 1 x 24-pin ATX power connector 1 x 4-pin ATX 12V power connector 2 x USB connectors for 4 additional USB 2.0 ports 1 x CD audio-in connector 1 x GAME/MIDI connector 1 x Front panel High Denitio.
xii.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
ASUS P5PL2-E Chapter summary 1 1.1 Welcome! .............................................................................. 1-1 1.2 Package contents ................................................................. 1-1 1.3 Special features ............
ASUS P5PL2-E 1-1 1.1 Welcome! Th an k y ou f or bu yi ng an A SUS ® P5PL2-E motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the lon.
1-2 Chapter 1: Product introduction 1.3 Special features 1.3.1 Product highlights Latest processor technology The motherboard comes with a 775-pin surface mount Land Grid Array (LGA) socket designed for the Intel ® Pentium ® 4 processor in the 775-land package.
ASUS P5PL2-E 1-3 S/PDIF-out on Back I/O Port This motherboard provides convenient connectivity to external home theater audio systems via an S/PDIF-out (SONY-PHILIPS Digital Interface) jack. It allows to transfer digital audio without converting to analog format and keeps the best signal quality.
1-4 Chapter 1: Product introduction.
2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
ASUS P5PL2-E Chapter summary 2 2.1 Before you proceed .............................................................. 2-1 2.2 Motherboard overview .......................................................... 2-2 2.3 Central Processing Unit (CPU) ........
ASUS P5PL2-E 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
2-2 Chapter 2: Hardware information P5PL2-E 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Make sure to unplug the power cord before installing or removing the motherboard.
ASUS P5PL2-E 2-3 2.2.3 Motherboard layout 19cm (7.5in) 30.5cm (12in) DDR2 DIMM_A1 (64 bit,240-pin module) DDR2 DIMM_A2 (64 bit,240-pin module) DDR2 DIMM_B1 (64 bit,240-pin module) DDR2 DIMM_B2 (64 bit.
2-4 Chapter 2: Hardware information 2.2.4 Layout contents Slots Page 1. PCI-E x16 2-18 2. PCI-E x 1 2-18 3. PCI 2-18 Jumpers Page 1. Clear RTC RAM (3-pin CLRTC) 2-20 2. USB Device wake-up (3-pin USBPW12, USBPW34, 2-21 USBPW56, USBPW78) Rear panel connectors Page 1.
ASUS P5PL2-E 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-22 2. ICH7 Primary IDE connector (40-1 pin PRI_IDE) 2-23 3. Digital audio connector (4-1 pin SPDIF) 2-23 4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], 2-24 SATA3 [black], SATA4 [black]) 5.
2-6 Chapter 2: Hardware information 2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. 2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount.
ASUS P5PL2-E 2-7 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forenger to a 100º angle (A), then push the PnP cap from the load plate window to remove (B). 5. Position the CPU over the socket, making sure that the gold triangle is on the bottom-left corner of the socket.
2-8 Chapter 2: Hardware information The CPU ts in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! 6. Close the load plate (A), then push the load lever (B) until it snaps into the retention tab.
ASUS P5PL2-E 2-9 Fastener Motherboard hole 2.3.2 Installing the CPU heatsink and fan The Intel ® Pentium ® D LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. To install the CPU heatsink and fan: 1.
2-10 Chapter 2: Hardware information 3. Connect the CPU fan cable to the connector on the motherbo ard labeled CPU_FAN. 2. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.
ASUS P5PL2-E 2-11 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. Disconnect the CPU fan cable from the connector on the motherboard. 2. Rotate each fastener counterclockwise. 3. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard.
2-12 Chapter 2: Hardware information 5. Rotate each fastener clockwise to ensure correct orientation when reinstalling. The narrow end of the groove should point outward after resetting.
ASUS P5PL2-E 2-13 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM.
2-14 Chapter 2: Hardware information Qualified Vendors Lists (QVL) Side(s): SS - Single-sided DS - Double-sided CL: CAS Latency DIMM support: A - Supports one module inserted into either slot, in Single-channel memory configuration.
ASUS P5PL2-E 2-15 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. To install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward.
2-16 Chapter 2: Hardware information 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card To install an expansion card: 1.
ASUS P5PL2-E 2-17 2.5.3 Interrupt assignments Standard interrupt assignments IRQ Priority Standard Function 0 1 System Timer 1 2 Keyboard Controller 2 — Re-direct to IRQ#9 3 11 — 4 12 Communicatio.
2-18 Chapter 2: Hardware information 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
ASUS P5PL2-E 2-19 2.6 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
2-20 Chapter 2: Hardware information 2. USB device wake-up jumpers (3-pin USBPW12, USBPW34, USBPW56, USBPW78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
ASUS P5PL2-E 2-21 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
2-22 Chapter 2: Hardware information 7. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 8. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.
ASUS P5PL2-E 2-23 2. ICH7 Primary IDE connector (40-1 pin PRI_IDE) Thi s con necto r is for an Ul tra DMA 1 00/6 6 sig nal c able . The Ultr a DMA 100/66 signal cable has three connectors: a blue conn.
2-24 Chapter 2: Hardware information 4. Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3 [black], SATA4 [black]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives.
ASUS P5PL2-E 2-25 6. Front panel audio connector (10-1 pin AAFP) Th is co nn ec tor i s for a c has si s-m ou nt ed fr on t p an el au di o I /O m odu le th at su pp or ts ei th er HD A udi o or le ga cy AC ’9 7 a ud io st an da rd.
2-26 Chapter 2: Hardware information 7. USB port connectors (10-1 pin USB56, USB78) These connectors are for USB 2.0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS P5PL2-E 2-27 9 . C P U F a n c o n n e c t o r s ( 4 - p i n C P U _ F A N ) The fan conne ctors sup port cooli ng f ans o f 350 mA ~ 2000 mA (24 W max.
2-28 Chapter 2: Hardware information 11 . ATX power connectors (24-pin EATXPW, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS P5PL2-E 2-29 • System power LED (Green 3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
2-30 Chapter 2: Hardware information.
3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system..
ASUS P5PL2-E Chapter summary 3 3.1 Starting up for the rst time ................................................ 3-1 3.2 Powering off the computer .
ASUS P5PL2-E 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case co ver. 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped w ith a surge protector.
3-2 Chapter 3: Powering up 3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2000: 1. Click the Start button then click Shut Down... 2. Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer.
4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
ASUS P5PL2-E Chapter summary 4 4.1 Managing and updating your BIOS ........................................ 4-1 4.2 BIOS setup program ............................................................ 4-11 4.3 Main menu ....................................
ASUS P5PL2-E 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup.
4-2 Chapter 4: BIOS setup 4.1.2 AFUDOS utility The AFUDOS utility allows you to update the BIOS le in DOS environment using a bootable oppy disk with the updated BIOS le. This utility also allows you to copy the current BIOS le that you can use as backup when the BIOS fails or gets corrupted during the updating process.
ASUS P5PL2-E 4-3 The utility returns to the DOS prompt after copying the current BIOS le. 3. Press <Enter>. The utility copies the current BIOS le to the oppy disk. A:>afudos /oOLDBIOS1.rom AM I Fir mw ar e U pd at e U ti li ty - Ver si on 1.
4-4 Chapter 4: BIOS setup 5. The utility returns to the DOS prompt after the BIOS update process is completed. Reboot the system from the hard disk drive. A:>afudos /iP5PL2E.rom AM I Fir mw ar e U pd at e U ti li ty - Ver si on 1. 19 (A SUS V 2. 07( 03 .
ASUS P5PL2-E 4-5 4.1.3 ASUS CrashFree BIOS 2 utility The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. You can update a corrupted BIOS le using the motherboard support CD or the oppy disk that contains the updated BIOS le.
4-6 Chapter 4: BIOS setup The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the ASUS website (www.asus.com) to download the latest BIOS le. Recovering the BIOS from the support CD To recover the BIOS from the support CD: 1.
ASUS P5PL2-E 4-7 4.1.4 ASUS EZ Flash utility The ASUS EZ Flash feature allows you to update the BIOS without having to go through the long process of booting from a oppy disk and using a DOS-based utility.
4-8 Chapter 4: BIOS setup Installing ASUS Update To install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu a ppears. 2. Click the Utilities tab, then click Install ASUS Update VX.XX.X X. See page 5-3 for the Utilities screen menu.
ASUS P5PL2-E 4-9 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select. Click Next. Updating the BIOS through the Internet To update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
4-10 Chapter 4: BIOS setup Updating the BIOS through a BIOS file To update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears.
ASUS P5PL2-E 4-11 4.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section “4.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup”.
4-12 Chapter 4: BIOS setup Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit System Time [04:46:19] System Date [Tue 01/01/2002] Legacy Diskette A [1.
ASUS P5PL2-E 4-13 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items.
4-14 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
ASUS P5PL2-E 4-15 4.3.4 Primary, Third and Fourth IDE Master/Slave The BIOS automatically detects the connected IDE devices. There is a separate sub-menu for each IDE device. Select a device item, then press <Enter> to display the IDE device information.
4-16 Chapter 4: BIOS setup PIO Mode [Auto] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Conguration options: [Auto] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology.
ASUS P5PL2-E 4-17 Onboard IDE Operate Mode [Enhanced Mode] Allows selection of the IDE operation mode depending on the installed operating system (OS).
4-18 Chapter 4: BIOS setup 4.3.6 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. AMI BIOS Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication.
ASUS P5PL2-E 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. 4.4.1 JumperFree Configuration AI Overclocking [Auto] Allows you to select the overclocking options to achieve the desired CPU internal frequency.
4-20 Chapter 4: BIOS setup FSB/CPU External Frequency Synchronization Front Side Bus CPU External Frequency FSB 1066 266 MHz FSB 800 200 MHz FSB 533 133 MHz The following item appears only when you set the AI Overclocking item to [Manual]. CPU Frequency [XXX] Displays the frequency sent by the clock generator to the system bus and PCI bus.
ASUS P5PL2-E 4-21 Memory Voltage [Auto] Allows you to select the DDR2 reference voltage. Conguration options: [Auto] [1.80V] [1.90V] [1.95V] [2.00V] Refe r to the D DR2 d ocumen tatio n bef ore ad justi ng th e memo ry vo ltage .
4-22 Chapter 4: BIOS setup 4.4.2 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the conguration options. USB Function [Enabled] Allows the BIOS to auto-detect the number of USB ports in your system.
ASUS P5PL2-E 4-23 4.4.3 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects. Microcode Updation [Enabled] Allows you to enable or disable the microcode updation.
4-24 Chapter 4: BIOS setup Advanced Chipset Settings Configure DRAM Timing by SPD [Enabled] When this item is enabled, the DRAM timing parameters are set according to the DRAM SPD (Serial Presence Detect). When disabled, you can manually set the DRAM timing parameters through the DRAM sub-items.
ASUS P5PL2-E 4-25 Hyper Path 3 [Auto] Allows you to enable or disable the ASUS Hyper Path 3 feature. Conguration options: [Disabled] [Enabled] [Auto] DRAM Throttling Threshold [Auto] Enable DRAM Throttling Thermal Throttling will make your system more stable.
4-26 Chapter 4: BIOS setup 4.4.5 Onboard Devices Configuration HD Audio Controller [Enabled] Allows you to enable or disable the high-denition audio CODEC. Conguration options: [Enabled] [Disabled] OnBoard PCIEX GbE LAN [Enabled] Allows you to enable or disable the onboard PCI Express Gigabit LAN controller.
ASUS P5PL2-E 4-27 Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] Parallel Port Address [378] Allows you to select the Parallel Port base addresses.
4-28 Chapter 4: BIOS setup 4.4.6 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
ASUS P5PL2-E 4-29 IRQ-xx assigned to [PCI Device] When set to [PCI Device], the specic IRQ is free for use of PCI/PnP devices. When set to [Reserved], the IRQ is reserved for legacy ISA devices.
4-30 Chapter 4: BIOS setup 4.5 Power menu The Power menu items allow you to change the settings for the ACPI and Advanced Power Management (APM) features.
ASUS P5PL2-E 4-31 4.5.4 APM Configuration Power Button Mode [On/Off] Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Conguration options: [On/Off] [Suspend] Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into off state after an AC power loss.
4-32 Chapter 4: BIOS setup RTC Alarm Minute To set t he al arm minut e, hi ghlig ht t his i tem and press the <+> or <-> key to make the selection. Conguration options: [00] [1]... ~ [59] RTC Alarm Second To set t he al arm second, highlight this item and press the <+> or <-> key to make the selection.
ASUS P5PL2-E 4-33 4.5.5 Hardware Monitor Hardware Monitor AI Quiet [Disabled] CPU Temperature [79.5ºC/175ºF] MB Temperature [36ºC/96.5ºF] CPU Fan Speed (RPM) [4470RPM] CPU Q-Fan Control [Disabled] Chassis Fan1 Speed (RPM) [N/A] Power Fan Speed (RPM) [N/A] VCORE Voltage [ 1.
4-34 Chapter 4: BIOS setup CPU Temperature [xx.xºC/xx.xºF] MB Temperature [xx.xºC/xx.xºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not want to display the detected temperatures.
ASUS P5PL2-E 4-35 4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the sub-menu. Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit Boot Settings Boot Device Priority Boot Settings Conguration Security 4.
4-36 Chapter 4: BIOS setup 4.6.2 Boot Settings Configuration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
ASUS P5PL2-E 4-37 Interrupt 19 Capture [Disabled] When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Conguration options: [Disabled] [Enabled] 4.6.3 Security The Security menu items allow you to change the system security settings.
4-38 Chapter 4: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
ASUS P5PL2-E 4-39 Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility. When set to [Always], BIOS checks for user password both when accessing Setup and booting the system.
4-40 Chapter 4: BIOS setup Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System Time, and Password, the BIOS asks for a conrmation before exiting.
ASUS P5PL2-E 4-41 Load Setup Defaults Allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a conrmation window appears. Select <OK> to load the default values.
4-42 Chapter 4: BIOS setup.
5 Software support This chapter describes the contents of the support CD that comes with the motherboard package..
ASUS P5PL2-E Chapter summary 5 5.1 Installing an operating system .............................................. 5-1 5.2 Support CD information ........................................................ 5-1 5.3 ASUS MyLogo™ ...........................
ASUS P5PL2-E 5-1 If Autorun is NOT enabled in your computer, browse the contents of the support CD to locate the le ASSETUP.EXE from the BIN folder. Double- click the ASSETUP.EXE to run the CD. Click an item to install 5.1 Installing an operating system This motherboard supports Windows ® 2000/2003 Server/XP/64-bit XP operating systems (OS).
5-2 Chapter 5: Software support 5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. Intel Chipset Inf Update Program Installs the Intel ® Chipset Inf Update Program.
ASUS P5PL2-E 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS PC Probe II This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you of any detected problems.
5-4 Chapter 5: Software support 5.2.4 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. • Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening a user manual le.
ASUS P5PL2-E 5-5 5.2.5 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also nd this information on the inside front cover of this user guide. 5.2.6 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD.
5-6 Chapter 5: Software support Browse this CD Displays the support CD contents in graphical format. Technical support Form Displays the ASUS Technical Support Request Form that you have to ll out when requesting technical support.
ASUS P5PL2-E 5-7 Filelist Displays the contents of the support CD and a brief description of each in text format. 5.3 ASUS MyLogo™ The ASUS MyLogo™ utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On Self-Tests (POST).
5-8 Chapter 5: Software support To launch the ASUS MyLogo™: 1. Launch the ASUS Update utility. Refer to section “4.1.5 ASUS Update utility” for details. 2. Select Options from the drop down menu, then click Next. 3. Check the option Launch MyLogo to replace system boot log o before ashing BIOS, then click Next.
ASUS P5PL2-E 5-9 9. When the screen returns to the ASUS Update utility, ash the original BIOS to load the new boot logo. 10. After ashing the BIOS, restart the computer to display the new boot logo during POST.
5-10 Chapter 5: Software support.
A CPU features The Appendix describes the CPU features that the motherboard supports..
ASUS P5PL2-E Chapter summary A A.1 Intel ® EM64T ......................................................................... A-1 A.2 Enhanced Intel SpeedStep ® Technology (EIST) .................... A-1 A.3 Intel ® Hyper-Threading Technology ........
ASUS P5PL2-E A-1 A.1 Intel ® EM64T • The motherboard is fully compatible with Intel ® Pentium ® 4 LGA775 processors running on 32-bit operating systems. • The motherboard comes with a BIOS le that supports EM64T. You can download the latest BIOS le from the ASUS website (www.
A-2 Appendix: CPU features A.2.2 Using the EIST To use the EIST feature: 1. Tu rn o n t he co mp ut er, t he n e nt er th e BI OS Se tup . 2. Go t o the A dva nc ed Me nu , hig hl ig ht CP U Con g ur ati on , then press <Enter>. 3. Set the Intel(R) SpeedStep Technology item to [Automatic], then press <Enter>.
ASUS P5PL2-E A-3 A.3 Intel ® Hyper-Threading Technology • The motherboard supports Intel ® Pentium ® 4 LGA775 processors with Hyper-Threading Technology. • Hyp er -Th rea di ng Tec hn olo gy is su pp ort ed un der Wi nd ows ® XP/2003 Server and Linux 2.
A-4 Appendix: CPU features.
Een belangrijk punt na aankoop van elk apparaat Asus P5PL2-E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus P5PL2-E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus P5PL2-E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus P5PL2-E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus P5PL2-E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus P5PL2-E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus P5PL2-E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus P5PL2-E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
