Gebruiksaanwijzing /service van het product P5QL-CM van de fabrikant Asus
Ga naar pagina of 60
Motherboard P5QL-CM.
ii E441 1 Second Edition V2 December 2008 Copyright © 2008 ASUST eK Computer, Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced,.
iii Contents Notices ......................................................................................................... vi Safety information ..................................................................................... vii About this guide .
iv Contents 1.1 1 Software support ........................................................................ 1-30 1.1 1.1 Installing an operating system ...................................... 1-30 1.1 1.2 Support DVD information .......................
v Contents 2.5.3 ACPI APIC Support ....................................................... 2-15 2.5.4 APM Conguration ........................................................ 2-15 2.5.5 Hardware Monitor .............................................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
ix P5QL-CM specications summary (continued on the next page) CPU LGA775 socket for Intel ® Core™ 2 Quad / Core™ 2 Duo / Core ™ 2 Extreme / Pentium ® dual-core / Celeron ® dual-core / Celer.
x P5QL-CM specications summary ASUS Special Features ASUS CrashFree BIOS 3 ASUS Q-Fan ASUS EZ Flash 2 ASUS MyLogo 2 ASUS AI NET2 ASUS Express Gate Rear panel 1 x DVI port 1 x DP port 1 x VGA port 1 x PS/2 Keyboard port 1 x LAN (RJ45) port 6 x USB 2.
ASUS P5QL-CM 1-1 Chapter 1 Product introduction 1.1 Welcome! Thank you for buying an ASUS ® P5QL-CM motherboard! The motherboard delivers a host of new features and latest technologies, making it ano.
1-2 Chapter 1: Product introduction LGA775 Intel ® 45nm Processor Ready This motherboard supports the latest Intel 45nm CPU which introduces new micro-architecture features for greater performance at a given frequency , up to 50% larger L2 caches, and expanded power management capabilities for new levels of energy efciency .
ASUS P5QL-CM 1-3 1.3.2 Innovative ASUS features ASUS MyLogo2™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen.
1-4 Chapter 1: Product introduction 1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
ASUS P5QL-CM 1-5 P5QL-CM 1.5 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Ensure that you unplug the power cord before installing or removing the motherboard.
1-6 Chapter 1: Product introduction 1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots Pa ge Connectors/Jumpers/Slots Page 1. CPU, chassis, and power fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN, 3-pin PWR_F AN) 1-23 10. USB connectors (10-1 pin USB78 USB910 and USB1 112) 1-28 2.
ASUS P5QL-CM 1-7 1.6 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA775 socket designed for the Core™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium ® dual-core / Celeron ® dual-core and Celeron ® processors. • Unplug all power cables before installing the CPU.
1-8 Chapter 1: Product introduction T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab.
ASUS P5QL-CM 1-9 6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer .
1-10 Chapter 1: Product introduction 1.6.2 Installing the CPU heatsink and fan The Intel® LGA775 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel ® processor , the package includes the CPU fan and heatsink assembly .
ASUS P5QL-CM 1-1 1 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 1.6.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1.
1-12 Chapter 1: Product introduction P5QL-CM P5QL-CM 240-pin DDR2 DIMM sockets DIMM_A1 DIMM_B1 1.7 System memory 1.7.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. The gure illustrates the location of the DDR2 DIMM sockets: Channel Sockets Channel A DIMM_A Channel B DIMM_B 4.
ASUS P5QL-CM 1-13 1.7.2 Memory congurations Y ou may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR2 DIMMs into the DIMM sockets. • Alwa ys inst all DIM Ms w ith the sam e CA S la ten cy . Fo r op tim um c ompa tib ilit y , it is reco mmen ded tha t yo u ob tai n me mory mo dule s fr om the same ven dor .
1-14 Chapter 1: Product introduction V endor Part No. Size SS/ DS CL Chip No. Chip Brand DIMM support A* B* PSC AL6E8E63J-6E1 512MB SS 5 A3R12E3JFF717B9A00 PSC • • PSC AL7E8E63J-6E1 1G DS 5 A3R12E.
ASUS P5QL-CM 1-15 DDR2-800 MHz capability (continued on the next page) V endor Part No. Size SS/ DS CL Chip No. Chip Brand DIMM support A* B* Kingston KHX6400D2LL/1G 1G DS N/A Heat-Sink Package Kingst.
1-16 Chapter 1: Product introduction V endor Part No. Size SS/ DS CL Chip No. Chip Brand DIMM support A* B* PSC AL7E8F73C-8E1 1G SS 5 A3R1GE3CFF734MAA0E PSC • • PSC AL8E8F73C-8E1 2G DS 5 A3R1GE3CF.
ASUS P5QL-CM 1-17 Visit the ASUS website at www.asus.com for the latest QVL. DDR2-1066 MHz capability V endor Part No. Size SS/ DS CL Chip No. Chip Brand DIMM support A* B* Kingston KHX8500D2/512 512M.
1-18 Chapter 1: Product introduction 1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1.
ASUS P5QL-CM 1-19 1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1-20 Chapter 1: Product introduction 1.9 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS P5QL-CM 1-21 1.10 Connectors 1.10.1 Rear panel connectors 1. PS/2 mouse / keyboard port (blue) . This port is for a PS/2 mouse / keyboard. 2. Video Graphics Adapter (VGA) port . This 15-pin port is for a VGA monitor or other VGA-compatible devices.
1-22 Chapter 1: Product introduction 10. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 1 1. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.
ASUS P5QL-CM 1-23 Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! Only the CPU fan supports the ASUS Q-F AN feature.
1-24 Chapter 1: Product introduction 3. A TX power connectors (24-pin EA TXPWR, 4-pin A TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS P5QL-CM 1-25 6. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector .
1-26 Chapter 1: Product introduction P5QL-CM Parallel Port Connector P5QL-CM PIN 1 LPT STB# PD0 PD1 PD2 PD3 PD4 PD5 PD6 PD7 ACK# BUSY PE SLCT AFD ERR# INIT# SLIN# GND GND GND GND GND GND GND GND 7. IDE connector (40-1 pin PRI_EIDE) The onboard IDE connector is for the Ultra DMA 133/100/66/33 signal cable.
ASUS P5QL-CM 1-27 9. System panel connector (20-8 pin P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector .
1-28 Chapter 1: Product introduction 10. USB connectors (10-1 pin USB78, USB910 and 1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS P5QL-CM 1-29 12. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
1-30 Chapter 1: Product introduction 1.1 1 Software support 1.1 1.1 Installing an operating system This motherboard supports Windows ® XP/Vista Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.
ASUS P5QL-CM 2-1 Chapter 2 BIOS information 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update or AFUDOS utilities.
2-2 Chapter 2: BIOS information 2.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without using a DOS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .
ASUS P5QL-CM 2-3 • Enter the BIOS setup program. Go to the T ools menu to select EZ Flash 2 and press <Enter> to enable it. Press <T ab> to switch between drives until the correct BIOS le is found. 4. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done.
2-4 Chapter 2: BIOS information • Only a USB ash disk with F A T 32/16 format and single partition can support ASUS CrashFree BIOS 3. The device size should be smaller than 8GB. • DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! 4.
ASUS P5QL-CM 2-5 • The default BIOS settings for this motherboard apply for most conditions to ensure optimum performance. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability .
2-6 Chapter 2: BIOS information 2.2.3 Navigation keys At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. Some of the navigation keys differ from one screen to another .
ASUS P5QL-CM 2-7 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section 2.2.1 BIOS menu screen for information on the menu screen items and how to navigate through them.
2-8 Chapter 2: BIOS information LBA/Large Mode [Auto] Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.
ASUS P5QL-CM 2-9 2.3.6 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu. BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication.
2-10 Chapter 2: BIOS information FSB / CPU External Frequency Synchronization CPU Frequency [xxx] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the CPU frequency .
ASUS P5QL-CM 2-1 1 CPU V oltage [Auto] Allows you to set the CPU VCore voltage. The values range from 0.8500V to 1.55V with a 0.00625V interval. Conguration options: [Auto] [0mv] [50mv] [100mv] [150mv] Setting a very high voltage may damage the component permanently , and setting a very low voltage may cause the system to become unstable.
2-12 Chapter 2: BIOS information Intel(R) SpeedStep(TM) T ech [Enabled] Allows you to use the Enhanced Intel ® SpeedStep ® T echnology . When set to [Enabled] , you can adjust the system power settings in the operating system to use the EIST feature.
ASUS P5QL-CM 2-13 T o use the High-Bandwidth Digital Content Protection (HDCP) function, set this option to either [Lite] or [Paranoid] . If you select Paranoid Mode, the system reserves 96MB for playing and storing the decrypted contents. The operation system and other programs cannot use this reserved memory , and Vista Aero (DWM) is disabled.
2-14 Chapter 2: BIOS information T ake caution when changing the settings of the PCI PnP menu items. Incorrect eld values can cause the system to malfunction.
ASUS P5QL-CM 2-15 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
2-16 Chapter 2: BIOS information Power On By PS/2 KB/Mouse [Disabled] When set to [Enabled], this parameter allows you to use the PS/2 KB/mouse to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS P5QL-CM 2-17 2.6.1 Boot Device Priority 1st ~ xxth Boot Device These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
2-18 Chapter 2: BIOS information 2.6.3 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password.
ASUS P5QL-CM 2-19 Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup] , BIOS checks for user password when accessing the Setup utility . When set to [Always] , BIOS checks for user password both when accessing Setup and booting the system.
2-20 Chapter 2: BIOS information 2.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Exit system setup after saving the changes. F10 key can be used for this operation.
Een belangrijk punt na aankoop van elk apparaat Asus P5QL-CM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus P5QL-CM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus P5QL-CM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus P5QL-CM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus P5QL-CM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus P5QL-CM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus P5QL-CM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus P5QL-CM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
