Gebruiksaanwijzing /service van het product P8H61-M LX2 van de fabrikant Asus
Ga naar pagina of 72
Motherboard P8H61-M LX2 R2.0.
ii E7377 First Edition May 2012 Copyright © 2012 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitte.
iii Contents Safety information ...................................................................................... vi About this guide ........................................................................................ vii P8H61-M LX2 R2.0 specications summary .
iv Contents Chapter 2 BIOS information 2.1 Managing and updating your BIOS ............................................ 2-1 2.1.1 ASUS Update utility ........................................................ 2-1 2.1.2 ASUS EZ Flash 2 ..................
v Contents 2.7 Boot menu .................................................................................. 2-27 2.7.1 Bootup NumLock State [On] ......................................... 2-27 2.7.2 Full Screen Logo [Enabled] ..........................
vi Safety information Electrical safety • T o prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the supported features of the motherboard.
viii Bold text Indicates a menu or an item to select. Italic s Used to emphasize a word or a phrase. <Key> Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key . Example: <Enter> means that you must press the Enter or Return key .
ix P8H61-M LX2 R2.0 specications summary (continued on the next page) CPU LGA1 155 socket for Intel ® 3rd/2nd generation Core™ i7/ i5 / i3 / Pentium ® / Celeron ® Processors Supports Intel ® 22 nm CPU Supports Intel ® 32 nm CPU * Refer to www .
x Rear panel ports 1 x PS/2 Combo port 1 x DVI 1 x D-Sub port 1 x LAN (RJ-45) port 6 x USB 2.0 ports 3 x Audio Jacks Internal connectors/ switches/ buttons 2 x USB 2.
1-1 Chapter 1: Product introduction Chapter 1 Product introduction • If any of the items is damaged or missing, contact your retailer . Thank you for buying an ASUS ® P8H61-M LX2 R2.0 Series motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in your motherboard package.
ASUS P8H61-M LX2 R2.0 1-2 P8H61-M LX2 R2.0 1.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. Ensure that you unplug the power cord before installing or removing the motherboard.
1-3 Chapter 1: Product introduction 1.2.3 Motherboard layout 1.2.4 Layout contents Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page 1. CPU and chassis fan connectors (4-pin CPU_F AN, 3-pin CHA_FAN) 1-19 8. System panel connector (10-1 pin P ANEL) 1-21 2.
ASUS P8H61-M LX2 R2.0 1-4 1.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1 155 socket designed for the Intel ® Second Generation processors. • Refer to www .asus.com for Intel ® CPU support list. • Unplug all power cables before installing the CPU.
1-5 Chapter 1: Product introduction 3. Lift the load lever in the direction of the arrow until the load plate is completely lifted. Load plate 4. Remove the PnP cap from the CPU socket by lifting the tab only . The CPU ts in only one correct orientation.
ASUS P8H61-M LX2 R2.0 1-6 7. Close the load plate (A), and then push down the load lever (B), ensuring that the front edge of the load plate slides under the retention knob (C).
1-7 Chapter 1: Product introduction 1.3.2 Installing the CPU heatsink and fan The Intel ® LGA1 155 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel ® processor , the package includes the CPU fan and heatsink assembly .
ASUS P8H61-M LX2 R2.0 1-8 3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector . 1.3.3 Uninstalling the CPU heatsink and fan T o uninstall the CPU heatsink and fan: 1.
1-9 Chapter 1: Product introduction P8H61-M LX2 R2.0 240-pin DDR3 DIMM sockets DIMM_A1 DIMM_B1 P8H61-M LX2 R2.0 1.4 System memory 1.4.1 Overview The motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets.
ASUS P8H61-M LX2 R2.0 1-10 1.4.2 Memory congurations Y ou may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module.
1-1 1 Chapter 1: Product introduction DDR3-1333 MHz capability (continued on the next page) V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support 1DIMM 2 DIMMs A-DA TA .
ASUS P8H61-M LX2 R2.0 1-12 DDR3-1066 MHz capability DDR3-1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support 1DIMM 2DIMMs KINGSTON KVR1333D3N9/1G 1GB SS ELPIDA J1 108BDBG-DJ-F 9 1.5V KINGSTON KVR1333D3N9/2G 2GB SS Hynix H5TQ2G83AFRH9C 9 - KINGSTON KVR1333D3S8N9/2G 2GB SS Micron IID77 D9LGK - 1.
1-13 Chapter 1: Product introduction V endor Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage DIMM socket support 1DIMM 2DIMMs RiDA TA C304627CB1AG22Fe 2GB DS RiDA TA N/A 9 - RiDA TA E304459CB1.
ASUS P8H61-M LX2 R2.0 1-14 V endor Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1DIMM 2DIMMs KINGSTON KHX1600C9D3P1K2/4G 4GB(2 x 2GB) SS - - - 1.5V KINGSTON KHX1600C9D3K3/12GX(XMP) 12GB (3x4GB) DS - - 9-9-9-27 1.
1-15 Chapter 1: Product introduction V endors Part No. Size SS/DS Chip Brand Chip NO. Timing V oltage DIMM socket support (optional) 1DIMM 2DIMMs A-DA TA AX3U1866PB2G8-DP2(XMP) 2GB DS - - 8-8-8-24 1.55V-1.75V CORSAIR CMT4GX3M2A1866C9(XMP) 4GB(2 x 2GB) DS - - 9-9-9-24 1.
ASUS P8H61-M LX2 R2.0 1-16 DDR3-2200 MHz capability V endors Part No. Size SS/DS Chip Brand Chip NO. Timing V oltage DIMM socket support (optional) 1DI MM 2DIMMs G.SKILL F3-17600CL8D- 4GBPS(XMP) 4GB(2 x 2GB) DS - - 8-8-8-24 1.65V GEIL GET34GB2200C9DC (XMP) 2GB DS - - 9-10-9-28 1.
1-17 Chapter 1: Product introduction 1.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 1. Press the retaining clips outward to unlock a DIMM socket.
ASUS P8H61-M LX2 R2.0 1-18 1.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards.
1-19 Chapter 1: Product introduction 1.6 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS P8H61-M LX2 R2.0 1-20 1.7 Connectors 1.7.1 Rear panel connectors 1. PS/2 Keyboard / Mouse Combo port. This port is for a PS/2 keyboard or PS/2 mouse. 2. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN) through a network hub.
1-21 Chapter 1: Product introduction 6. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 7. USB 2.0 ports 3 and 4 . These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 8. Video Graphics Adapter (VGA) port.
ASUS P8H61-M LX2 R2.0 1-22 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W . • DO NOT forget to connect the 4-pin A TX +12V power plug.
1-23 Chapter 1: Product introduction Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! 4.
ASUS P8H61-M LX2 R2.0 1-24 6. Intel ® H61 Serial A T A 3.0Gb/s connectors (7-pin SA T A3G_1~4) These connectors connect to Serial A T A 3.0 Gb/s hard disk drives and optical drives via Serial A T A 3.
1-25 Chapter 1: Product introduction 8. System panel connector (10-1 pin P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector .
ASUS P8H61-M LX2 R2.0 1-26 10. TPM connector (20-1 pin TPM) This connector supports a T rusted Platform Module (TPM) system, which can securely store keys, digital certicates, passwords, and data. A TPM system also helps enhance network security , protects digital identities, and ensures platform integrity .
1-27 Chapter 1: Product introduction 1.8 Software support 1.8.1 Installing an operating system This motherboard supports Windows ® XP / V ista / 7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.
ASUS P8H61-M LX2 R2.0 1-28.
Chapter 2: BIOS information 2-1 Chapter 2 BIOS information Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future.
2-2 ASUS P8H61-M LX2 R2.0 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .asus.com. T o update the BIOS using EZ Flash 2: 1.
Chapter 2: BIOS information 2-3 • This function supports USB ash disks formatted using F A T 32/16 on a single partition only . • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! 2.
2-4 ASUS P8H61-M LX2 R2.0 Welcome to FreeDOS (http://www.freedos.org)! C:>d: D:> 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number . 4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB ash drive).
Chapter 2: BIOS information 2-5 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt.
2-6 ASUS P8H61-M LX2 R2.0 Updating the BIOS le T o update the BIOS le using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
Chapter 2: BIOS information 2-7 Using the power button , reset button , or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend you always shut down the system properly from the operating system.
2-8 ASUS P8H61-M LX2 R2.0 BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode . Y ou can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program.
Chapter 2: BIOS information 2-9 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode . Refer to the following sections for the detailed congurations.
2-10 ASUS P8H61-M LX2 R2.0 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items.
Chapter 2: BIOS information 2-1 1 2.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you with an overview of basic system information, and allows you to set the system date, time, language, and security settings.
2-12 ASUS P8H61-M LX2 R2.0 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
Chapter 2: BIOS information 2-13 User Password If you have set a user password, you must enter the user password for accessing the system. The User Password item on top of the screen shows the default Not Installed . After you set a password, this item shows Installed .
2-14 ASUS P8H61-M LX2 R2.0 2.4 Ai T weaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction.
Chapter 2: BIOS information 2-15 2.4.3 OC T uner OC T uner automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance. Press <Enter> and select OK to start automatic overclocking. Conguration options: [OK] [Cancel] 2.
2-16 ASUS P8H61-M LX2 R2.0 Secondary Plane Current Limit [Auto] Use <+>/<-> to adjust the value. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. 2.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.
Chapter 2: BIOS information 2-17 Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down. [Disabled] Disables the CPU thermal monitor function. Active Processor Cores [All] Allows you to choose the number of CPU cores to activate in each processor package.
2-18 ASUS P8H61-M LX2 R2.0 CPU Power Management Conguration CPU Ratio [Auto] Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency . Use <+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
Chapter 2: BIOS information 2-19 The following three items appear only when you set the Intel(R) Rapid Start T echnology to [Enabled]. Entry on S3 RTC W ake [Enabled] Allows you to enable or disable the iFFS invocation upon S3 RTC wake.
2-20 ASUS P8H61-M LX2 R2.0 Entry on S3 RTC W ake [Enabled] Allows you to enable or disable the iFFS invocation upon S3 RTC wake. Conguration options: [Enabled] [Disabled] Entry After [10 Minutes] This item appears only when you set the Entry on S3 RTC W ake to [Enabled] and allows you to set the RTC wake timer at S3 entry .
Chapter 2: BIOS information 2-21 2.5.4 System Agent Conguration Memory Remap Feature [Enabled] [Enabled] Allow you to enable remapping the memory above 4GB. [Disabled] Disables this function. Graphics Conguration Primary Display [Auto] Allows you to decide which graphics controller to use as the primary boot device.
2-22 ASUS P8H61-M LX2 R2.0 Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS). [Disabled] The USB devices can be used only for the BIOS setup program. [Auto] Allows the system to detect the presence of USB devices at startup.
Chapter 2: BIOS information 2-23 2.5.7 APM Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into of f state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss.
2-24 ASUS P8H61-M LX2 R2.0 2.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: 2.
Chapter 2: BIOS information 2-25 2.6.3 CPU V oltage, 3.3V V oltage, 5V V oltage, 12V V oltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignore if you do not want to detect this item.
2-26 ASUS P8H61-M LX2 R2.0 Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed.
Chapter 2: BIOS information 2-27 2.7 Boot menu The Boot menu items allow you to change the system boot options. 2.7.1 Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off].
2-28 ASUS P8H61-M LX2 R2.0 2.7.4 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so.
Chapter 2: BIOS information 2-29 2.8 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 2.8.1 ASUS EZ Flash Utility Allows you to run ASUS EZ Flash 2.
2-30 ASUS P8H61-M LX2 R2.0 2.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
Appendices A-1 Appendices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation.
A-2 ASUS P8H61-M LX2 R2.0 VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea W arning Statement Canadian Department of Communications Statement This digital apparatus does not exceed th.
Appendices A-3 ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
A-4 ASUS P8H61-M LX2 R2.0 DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : Motherboard Model Number : P8H61-M LX2 R2.
Een belangrijk punt na aankoop van elk apparaat Asus P8H61-M LX2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus P8H61-M LX2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus P8H61-M LX2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus P8H61-M LX2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus P8H61-M LX2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus P8H61-M LX2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus P8H61-M LX2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus P8H61-M LX2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
