Gebruiksaanwijzing /service van het product KX-MB772CX van de fabrikant Panasonic
Ga naar pagina of 88
KX-MB262CX or KX-MB772CX may not be a vailab le in some areas. KX-MB772 onl y: L This unit is compatible with Caller ID . T o u se this feature, y ou must subscribe to the appropriate service of your service pr ovider . L Be sure to use the telephone line cord inc luded in this unit.
2 Thank y ou for p urcha sing a P anasonic Multi- Function Printer . This model is designed to be used in Mid dle East, Hong K ong, Malaysia, Asia, New Zealand, Africa and Latin America according to the location setting feature (KX-MB772 only). The default setting is Middle East.
Location 3 Location Location A v ailab le features b y locati on setting (KX-MB772 only) The f ollowing features ma y v ar y slightly dep ending on the locati on setting (#114 on page 54).
Import ant Information 4 Importan t Information Important Inform ation For best perf ormance T oner car tridg e and drum unit L When replacing the to ner car tr idge or dru m unit, do not allow dus t, water , or liquids to come in contact with the drum.
T able of Contents 5 1. T able of Conte nts 1. Intr oduction and Installation Accessories 1.1 Included accessories .............. ................. ...... 7 1.2 Accessor y inf or mation ............ .................... ... 7 Finding the Controls 1.3 Button descriptions .
T able of Contents 6 T roubleshooting 11.3 When a function does not work ................... 68 12. P aper Jams Jam s 12.1 Recording paper jam ................. ................. . 73 12.2 Document jams (Auto document f eeder) (KX- MB772 only) .. ....
1. Introduction and Installation 7 1 Introduc tion and Install ation Accessories 1.1 Inc luded accessories *1 Prints about 500 A4-sized pages with a 5 % image area (page 85). Note: L Sav e the orig inal car ton and packing mater ials for future shipping and transpor tation of the unit.
1. Intr oduction and Installation 8 Finding th e Controls 1.3 Button descriptions * The small hole on the left si de of the LCD di splay is f or beeps (KX-MB262 only). * The pictured model is KX-MB772. A { COPY } L T o switch to the copy mode (page 18, 31).
1. Introduction and Installation 9 1.4 Overview 1.4.1 Front vie w KX-MB772 KX-MB262 1.4.2 Rear view KX-MB772 KX-MB262 1 To p c o v e r 2 ADF (A uto Document Fe eder) co ver 3 Document guides 4 Documen.
1. Intr oduction and Installation 10 Removi ng the shipping tape Remove the shipping tape ( 1 ). Note: L Shipping tape positions are subj ect to change without notice. Installation 1.5 T oner car tridg e and drum unit The included toner car tridge is a star ter to ner car tr idge.
1. Introduction and Installation 11 3 Place the toner car tridge ( 3 ) into the dr um unit ( 4 ) vertically . 4 T ur n the green le vers ( 5 ) on each side of the toner car tr idge while pressing down fir mly . 5 Make sure that the triangles ( 6 ) match, to install the toner car tr idge correctly .
1. Intr oduction and Installation 12 7 Install the drum and toner unit ( k ) by holding the tabs. L Make sure that the triangles ( l ) match, to install the drum and toner uni t correctly . 8 Close the top cov er until lock ed. Caution: L T o prevent injuries, b e careful not to put your hands under th e top cover .
1. Introduction and Installation 13 L T o main tain prin t quality and machine life , we recommend you to clean slots and o penings (page 4) and the inside of the unit (page 79, 82) when replacing the toner car tridge and/or dr um unit.
1. Intr oduction and Installation 14 If the top part of the e xtender is detached 1. With the top par t of th e extender in the open position, inser t the tab ( 1 ) into the left hole ( 2 ) of the extender . 2. Slide the other tab ( 3 ) into the right hole ( 4 ) of the e xtender from below until it clicks into place.
1. Introduction and Installation 15 1.7 Recor ding paper The paper input tray unit can hold: – Up to 250 sheets of 60 g/m 2 to 75 g/m 2 paper . – Up to 230 sheets of 80 g/m 2 paper. – Up to 200 sheets of 90 g/m 2 paper. L Please refer to page 84 f or information on recording paper .
1. Intr oduction and Installation 16 5 Inser t the pap er input tra y to the unit, lifting the front par t of the tray . Then push it completely into the unit. Note: L If the paper is not loaded correctly , re-adjust the paper guides, or the paper ma y jam.
2. Preparation 17 2 Preparation Connecti ons and Setup 2.1 Connections Caution: L When you operate this product, the power outle t should be nea r the product and ea sily accessible. L Be sure to use the telephon e line cord inc luded in this unit (KX-MB772 onl y).
2. Preparation 18 2.2 Dialling mode (KX-MB772 only) Important: L Not av ailable when “ NEW ZEALAND ” is selected in feature #114 on page 54. If you cannot dial (page 36), change this setting according to your telephone line ser vice. 1 { MENU } i {#}{ 1 }{ 2 }{ 0 } DIALLING MODE =TONE [ V^ ] 2 Press { 1 } or { 2 } to select the desired setting.
2. Preparation 19 Document Requirements 2.4 Setting the original 2.4.1 Using the scanner glass 1 Open the document cov er ( 1 ). 2 Place the document F ACE DO WN on the scanne r glass ( 2 ), aligning the top left of the document with the cor ner to which the m mar k points.
2. Preparation 20 Minimum document size Maximum document size Effective scanning area L Shaded area will be scanned. Document weight L Single sheet: 60 g/m 2 to 75 g/m 2 L Multiple sheets: 60 g/m 2 to 75 g/m 2 Help 2.
2. Preparation 21 Vol um e 2.6 Adjusting v olume (KX-MB772 only) Important: L Before adjusting v olume , set the operation mode to fax mode. If the { FA X } light is OFF , turn it ON by pressing { FA X } . Ringer volu me While the uni t is idle, press {V} or {^} .
2. Preparation 22 2.8 Y our logo (KX-MB772 onl y) Y ou can program your logo (name, company name , etc.) so that it appears on t he top of each page sent. 1 { MENU } i {#}{ 1 }{ 0 }{ 2 } i { SET } LOGO= | 2 Enter your logo , up to 30 ch aracters (see page 63 for character entry).
2. Preparation 23 2.10 Installing Multi-Function Station 2.10.1 Required computer en viro nment P anasonic Multi-Function St ation so ftware enables the unit to carry out th e fo llowing functions: .
2. Preparation 24 L If the unit is connected to your computer , the model name will be autom atically detected. L Y ou can change the name of the unit if necessar y . 7 Click [ Install ] , then f ollow the on-screen instru ctions. L The files will be copied to your computer .
2. Preparation 25 2.11 Star ting Multi-Function Station [ Start ] i [ All Programs ] or [ Programs ] i [ P anasonic ] i the unit’ s name i [ Multi-Functio n Station ] L Multi-Functio n Station will appear . * The pictured screenshot is for KX-MB772.
3. Printer 26 3 Printer Printer 3.1 Printing fr om Windows applications Y ou can pr int a file created in a Windows application. For e xample, to print from WordP ad, proceed as follows . 1 Open the document you want to pr int. 2 Select [ Print... ] from the [ File ] menu.
3. Printer 27 3.1.1 Using the manual in put tray Y ou can print on plain pa per and labels. The manual input tra y is used only for printing with the computer and can hold one page at a time. When printing multipl e pages, add a next page after the first page has been fed into the unit.
4. Scanner 28 4 Scanner Scanner 4.1 Scanning from the unit (Push Scan) Y ou can easily scan the document by operating the operation panel on the unit. Select following scanning modes depending on the way to use the scanned image .
4. Scanner 29 2 { SCAN } 3 Press {V} or {^} repeatedly to select “ OCR ” . i { SET } 4 Press {V} or {^} repeatedly to select “ USB HOST ” . i { SET } 5 If necessar y , change the scanning settings (scan type / resolution / fil e f or mat / br ightness / contrast / scan size).
4. Scanner 30 L The scanned image will be displayed in the [ Multi-Function Viewer ] window after scanning. L T o sav e the scanned image, select [ Save As ... ] from the [ File ] menu. L T o cance l scanning while the docu ment is being scanned, click [ Cancel ] .
5. Copier 31 5C o p i e r Copy 5.1 Making a cop y Illegal copies L It is unl awful to make copies of cer tain documents. Copying certain documents may be illegal in y our countr y . P enalties of fine s and/or impri sonment may be imposed on those found guilty .
5. Copier 32 5.1.2 Using the auto document f eeder (KX- MB772 only) 1 If the { COPY } light is OFF , turn it ON by pressing { COPY } . 2 Set the original (pa ge 19). 3 If necessar y , change the resolution and contrast according to the type of document.
5. Copier 33 Example: 150% enlarged copy Using the scanne r glass ( 1 ): Using the auto do cument feeder (KX-MB772 onl y): Example: 70% reduced copy Using the scanne r glass ( 1 ): Using the auto do cument feeder (KX-MB772 onl y): 5.
5. Copier 34 Note: L Y ou can sav e the previous page la yout setting (f eature #467 on page 61). 5.2.3 T o make a poster size cop y (P oster feature) (Scanner glass onl y) Y ou can make copies divided in to 4 ( “ 2 × 2 ” ) or 9 ( “ 3 × 3 ” ) sections to mak e enlarged copies of the individ ual sections.
5. Copier 35 Note: L Y ou can sav e the previous page la yout setting (f eature #467 on page 61). 5.2.5 T o collate mu ltiple copies The unit can co llate mult iple copies in th e same order as the original docu ment pages. 1 Set the original (pa ge 19).
6. Fax (KX-MB772 onl y) 36 6 Fax (KX-M B772 only) Sending Faxes 6.1 Sending a fax manuall y 6.1.1 Using the scanner glass By using the scanner glass, y ou can send a pag e from booklets or small size paper that canno t be sent with the auto document feeder .
6. Fax (KX-MB772 onl y) 37 Printing a journal report A jour nal repor t provides you with a printed record of the 30 most recent fax es. T o pr int it manually , see page 83. T o pr int it automatically after ev er y 30 new fax transmissions and receptions, make sure f eature #402 is activated (page 57).
6. Fax (KX-MB772 onl y) 38 3 Enter the telephone number , up to 32 digits. i { SET } L T o program other items, repeat steps 2 to 3. 4 { MENU } Note: L A hy phen or a space entered in a telephone number counts as 2 digits. 6.2.3 Editing a stored item 1 { DIRECT OR Y } 2 Press {V} or {^} repeatedly to displa y the desired item.
6. Fax (KX-MB772 onl y) 39 3 Enter the fax n umber using one-touch dial or navigator directory . 4 { ST ART } 6.4 Br oadcast transmission By storing one-touch dial a nd navigator directory items (page 37) into th e broadcast memor y , you can send the same document to mu ltiple par ties (up to 20).
6. Fax (KX-MB772 onl y) 40 2 Press {V} or {^} repeatedly to displa y the desired broadcast memor y ( “ <BROADCAST> ” or “ <MANUAL BROAD> ” ). i { MENU } i {*} 3 Press {V} or {^} repeatedly to displa y the desired item you w ant to add.
6. Fax (KX-MB772 onl y) 41 6.5 Sending a computer document as a fa x message fr om y our computer Y ou can access the fax function from a Wind ows application usin g Multi-Function Sta tion. F or example, to send a document created from W ordPad, proceed as f ollows.
6. Fax (KX-MB772 onl y) 42 Setup Set the f ax machine to TEL mode (page 43) by pressing { F AX A UT O ANSWER } rep eatedly . Note: L Make sure f eature #40 4 is set to “ TEL ” beforehand (page 57). How to receive phone calls and faxes Y ou hav e to answer all calls manually .
6. Fax (KX-MB772 onl y) 43 6.7 Receiving a fax automaticall y – A uto answer ON 6.7.1 Activ ating F AX ONL Y mode Press { F AX A UT O ANSWER } repeatedly to display “ FAX ONLY MODE ” .
6. Fax (KX-MB772 onl y) 44 Note: L T o stop receiving, see p age 64. L T o recei ve f ax documents using the e xtension telephone, make sure remote fax activation is turned ON (f eature #434 on page 59) beforehand.
6. Fax (KX-MB772 onl y) 45 6.9 Using the unit with an answering mac hine 6.9.1 Setting up the unit and an answering machine 1 Connect the answ eri ng machine ( 1 ). L Answ erin g machine is no t included. L Remov e the stopper ( 2 ) if attached. 2 Set the number of rings on the answ ering machine to 4 rings or less.
6. Fax (KX-MB772 onl y) 46 6.11 Junk fax pr oh ibitor (preventing fax reception fr om undesired caller s) If you subscribe to Caller ID servi ce (page 48), this f eature prev ents f ax receptio n from calls that do not show caller information.
6. Fax (KX-MB772 onl y) 47 6.12 Receiving a fax into y our computer Y ou can receive a f ax document on your computer . The received f ax document is saved as an image file (TIFF- G4 f or mat). T o receive a f a x document using your computer , ma ke sure the f ollowing features are set bef orehand.
7. Caller ID (KX-MB772 only) 48 7 Caller ID (K X-MB772 only) Caller ID 7.1 Caller ID service This unit is compatible with the Caller ID service off ered by y our local teleph one company . T o use this unit’s Caller ID features, y ou must subscri be to a Caller ID ser vice.
7. Caller ID (KX-MB772 only) 49 7.2 Viewing and call ing bac k using caller inf ormation Important: L Calling bac k will not be possible if the caller information does not inc lude a telephone numb er . L If the area code of the received telephone number is the same as your s, the area code may need to be deleted befo re callin g back.
7. Caller ID (KX-MB772 only) 50 7.4 Erasing caller inf ormation 7.4.1 Erasing all caller inf ormation 1 Press { MENU } repeatedly to displa y “ CALLER SET UP ” . i { SET } L “ CALL LIST ERASE ” will be displa yed. 2 { SET } L T o cance l erasing, press { ST OP } , then { MENU } .
8. Distinctive Ring (KX-MB772 only) 51 8 Distinc tive Ring ( KX-MB77 2 only) Distinct ive Ring 8.1 Distinctive Ring (F ax Ability/Duplex ring) service Important: L Not av ailable when “ MALAYSIA ” is selected in feature #114 on page 54.
8. Distinctive Ring (KX-MB772 only) 52 8.4 Pr ogramming the ring pattern assigned f or fax Important: L A va ilable wh en “ MIDDLE EAST ”, “ ASIA ”, “ AFRICA ” or “ LAT.AMERICA ” is selected i n feature #114 on page 54. 1 Set f eature #430 to “ ON ” (page 51).
9. Programmab le Features 53 9 Programm able Featur es Features S ummary 9.1 Pr ogramming 1 { MENU } 2 Press {#} and the 3-digit code (page 54 to page 62). 3 Press the desired selection to display the desired setting. L This step may be slightly diff eren t depending on the feature .
9. Pr ogrammable Features 54 9.2 Basic features Feature/Code Selection Setting the date and time {#}{ 1 }{ 0 }{ 1 } (KX-MB772 only) Enter the date and time using the di al ke ypad. See page 21 for details. Setting your logo {#}{ 1 }{ 0 }{ 2 } (KX-MB772 only) Enter your logo using the d ial ke ypad.
9. Programmab le Features 55 Changing th e passwor d for feature programming via remote operation {#}{ 1 }{ 5 }{ 5 } 1. { MENU } i {#}{ 1 }{ 5 }{ 5 } i { SET } 2. Enter the current passw ord. i { SET } L The default pass word is “ 1234 ” . 3. Enter a new 4-digit pass word using 0–9.
9. Pr ogrammable Features 56 Setting the default op eration mode timer {#}{ 4 }{ 6 }{ 4 } (KX-MB772 only) T o set the timer before returni ng to the default operation mode (feature #463).
9. Programmab le Features 57 9.3 F ax features (KX-MB772 onl y) Feature/Code Selection Changing the TEL /F AX delay ed ring count {#}{ 2 }{ 1 }{ 2 } If you use an e xtension teleph one in TEL/F AX mode, select the d esired number of times the e xtension telephone r ings before the unit ans wers the call.
9. Pr ogrammable Features 58 Sending a fax at a specific time {#}{ 4 }{ 1 }{ 2 } This f eature allows you to tak e advantage of lo w-cost calling hours offered b y your telephone company . This f eature can be set up to 24 hours in ad vance of the desired time .
9. Programmab le Features 59 Setting the ring pattern for fax (Distinctive Ring feature) {#}{ 4 }{ 3 }{ 1 } { 1 } “ A ” { 2 } “ B ” { 3 } “ C ” { 4 } “ D ” { 5 } “ B-D ” (def ault) Note: L This feature ma y not b e av a ilable d epending on feature #114 setting (page 3).
9. Pr ogrammable Features 60 Setting friendly reception {#}{ 4 }{ 3 }{ 8 } T o receive a fax automatically when you ans wer a call and hear a fax calling tone (sl ow beep). { 0 } “ OFF ” : Y ou have to press { ST A RT } for f ax reception. { 1 } “ ON ” (def ault): Y ou do not hav e to press { ST ART } for fa x r e c e p t i o n .
9. Programmab le Features 61 9.4 Copy f e atures 9.5 PC print features Feature/Code Selection Changing the de fault copy resolution {#}{ 4 }{ 6 }{ 1 } T o chan ge the default resolution setting for copying. { 1 } “ TEXT/PHOTO ” : F or docu ments containing both text and photographs.
9. Pr ogrammable Features 62 9.6 Scan features Feature/Code Selection Setting the scan mode for Push Scan {#}{ 4 }{ 9 }{ 3 } { 1 } “ VIEWER ” (def a ult): The scanned image will be displayed in the [ Multi- Function Viewer ] window . { 2 } “ FILE ” : The scanned image will be sav ed as a file.
10. Useful Inf ormation 63 10 Useful I nformation Useful In formation 10.1 Character entry (KX-MB772 only) The dial ke ypad is used to enter characters and numbe rs. –P r e s s { < } or { > } to mov e the cursor . – Press dial ke ys to enter characters and numbers.
10. Useful Information 64 10.2 Status of the unit 10.2.1 Using Remote Contr ol Y ou can easily operate the follo wing functi ons from your computer . – Programming the f eatu res (page 54) KX-MB772 .
11. Help 65 11 Help 11.1 Err or messages – Re por ts (KX-MB772 only) If a problem occurs during fax tr ansmission or reception , one of the following messages will be prin ted on the sending and jour nal repor ts (page 36 ). Message Code Cause & Solution COMMUNICA T ION ERROR 40-42 46-72 FF L A transmission or reception error occurred.
11. Help 66 11.2 Err or messages – Display If the unit detects a problem, one or more of the follo wing messages will appear on the display . Display Cause & Solution “ CALL SERVICE ” L There is something wrong with the u nit. Contact our ser vic e personnel.
11. Help 67 “ NO FAX REPLY ” L The other par ty’ s fax machine is busy or has run out of recording paper . T ry again. “ OUT OF PAPER INPUT TRAY #2 ” L Recording paper is not installed in the ma nual input tra y . Install paper (page 27). “ PAPER JAMMED ” “ OPEN TOP COVER ” L A recording paper jam occurred.
11. Help 68 Troubleshooting 11.3 When a function doe s not w ork 11.3.1 General Prob lem Cause & Soluti on The unit does not w ork. L Check the connections (page 17, 23). The output tray becomes full quickl y or the recording paper does not stack p roperly on the output tra y .
11. Help 69 11.3.2 Printing pr oblems 11.3.3 Scanner Prob lem Cause & Soluti on The printing qual ity is poor . L Some paper has instr uctions recommendi ng which side to pr int on. T ry tur ning the recording paper over . L Y ou ma y hav e used paper with a cotton and/or fib re content that is ov er 20%, such as letterhead or resume paper .
11. Help 70 11.3.4 Copier 11.3.5 F ax (KX-MB772 only) Prob lem Cause & Soluti on The unit will no t make a copy . L Y ou cannot make a cop y during programming. Make the cop y after programming. L The document was not f ed into the unit prop erly .
11. Help 71 I cannot receive documents automatically . L The receiving mode is set to TEL mode. Set to F AX ONL Y mode (page 43) or TEL/F AX mode (page 44). L The time taken to ans wer the call is too long . Decrease the number of ring s bef ore the u nit answ ers a call (f eature #210 on page 55).
11. Help 72 11.3.6 Using an ans wering machine (KX-MB772 onl y) 11.3.7 If a power failure o ccurs L The unit will not function. L If any documents are stored in the memor y (i.e. during copy , PC printing), they will be lost. KX-MB772 only: L The unit is not designed for making emergency telephone calls when the power fails .
12. P aper Jams 73 12 Paper J ams Jams 12.1 Recor ding paper jam 12.1.1 When the recor ding paper has jammed inside of the unit The display will show the follo wing. PAPER JAMMED b OPEN TOP COVER CHECK REAR COVER Caution: L Do not pull out th e jammed paper f orcib ly bef ore opening the top co ver .
12. P aper Jams 74 3. Close the paper input tray . L Open and close th e top cov er ( 4 ) to clear the error message. Case 2: When the recording pape r has jammed near the drum and toner uni t: 1. Pull open the paper input tra y ( 1 ). 2. Lift the top cover release le ver ( 2 ) and open the top cov er ( 3 ).
12. P aper Jams 75 3. Remov e the jamme d paper ( 6 ) carefully by pulling it upward s. Remov e the jamme d paper ( 7 ) carefully by pulling it tow ard you.
12. P aper Jams 76 Case 3: When the recor ding paper has jammed near the fuser unit: 1. Lift the top cov er release lev e r ( 1 ) and open the top cov er ( 2 ). Note: L Do not touch the transfer roller ( 4 ). 2. Lift both green le vers ( 5 ) until the y stop.
12. P aper Jams 77 12.1.2 When the recording pa per is not fed into the unit pr operly The display will show the follo wing. CHECK PAPER #1 PRESS START 1 Pull the paper input tray until it clicks into place, then pull it completely out, lifting the front par t of the tra y .
12. P aper Jams 78 12.2 Document jams (A uto document feeder) (KX-MB772 only) Caution: L Do not pull out the jammed document f orcib ly before lifting the ADF co ver . 1 Open the ADF cov er ( 1 ) while holding the document cov er ( 2 ). 2 Remov e the j ammed document ( 3 ) carefully .
13. Cleaning 79 13 Cleanin g Cleaning 13.1 Cleaning the white plates and glass Clean the white plates and glass when a black line , a white line or a dir ty patte rn appears on: – y our recording paper , – the origi nal document, – the scanned da ta, or – the f ax document received by the other pa r ty (KX- MB772 only).
13. Cleaning 80 13.1.2 Lowe r glass 1 Disconnect the power cord. 2 Lift the top cov er release lev er ( 1 ) and open the top cov er ( 2 ). Note: L Do not touch the transfer roller ( 4 ). 3 Remov e the dr um and toner unit ( 5 ) by holding the tabs. 4 Clean the lo wer glass ( 6 ) with a soft and dr y cloth.
13. Cleaning 81 L Make sure that the triangles ( 8 ) match, to install the drum and toner uni t correctly . 6 Close the top cover until locked. Caution: L T o prevent injuries, b e careful not to put your hands under th e top cover . 7 Re-connect the power cord.
13. Cleaning 82 13.2 Cleaning the docume nt feeder r ollers (KX-MB772 onl y) Clean the rollers when the document frequently misf eeds. 1 Disconnect the power cord.
14. General Information 83 14 General Information Pr inted Reports 14.1 Reference lists and reports Y ou can print out the following lists and repor ts for y our reference .
14. General Inf ormation 84 ITU-T No.1 T est Char t Note: L Design and specifications are subje ct to change without notice. L The pictures a nd illustrations in these instru ctions ma y vary slightly from the actual produ ct. L The accuracy of the clock is appro ximately ± 60 seconds a month (KX-MB772 only).
14. General Information 85 To n e r l i f e T one r life depends on the amount of content in a received, copied or printed document. The following is the approximate relationship between image area and toner life f or replacement to ner car tr idge (Model No.
15. Index 86 15. Index 15.1 Inde x # #101 Date and time : 21 #102 Y our l ogo: 22 #103 Y our fax numb er : 22 #114 Location: 54 #120 Dialli ng mode: 18 #121 Recall/flash time: 54 #145 LCD display cont.
15. Index 87 Manual input tr ay: 27 Memor y reception a ler t (Feature #437): 59 Mode timer (F ea ture #464 ): 56 Multi-Functi on Station softw are Activ ating: 25 Installing: 23 Uninstalling: 24 N Na.
PFQX2741ZA CM0807DN0 (CD).
Een belangrijk punt na aankoop van elk apparaat Panasonic KX-MB772CX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic KX-MB772CX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic KX-MB772CX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic KX-MB772CX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic KX-MB772CX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic KX-MB772CX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic KX-MB772CX kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic KX-MB772CX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
