Gebruiksaanwijzing /service van het product PT-AE500U van de fabrikant Panasonic
Ga naar pagina of 30
ENGLISH TQBJ 0133 LCD Pr ojector Operating Instructions Model No. PT -AE500U Before operating this product, please read the instructions carefully and save this manual for future use.
2-E NGLISH E NGLISH -3 Preparation IMPOR T ANT SAFETY NO TICE WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Dear P anasonic Customer: This instruction booklet provides all the necessary operating information that you might require.
E NGLISH -5 Preparation Precautions with regar d to saf ety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the power cord from the wall outlet.
E NGLISH -7 Preparation 6-E NGLISH Do not look into the lens while the projector is being used. B Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes. B Be especially careful not to let young children look into the lens.
E NGLISH -9 Preparation 8-E NGLISH When inserting the batteries, make sure the polarities (+ and -) are correct. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
E NGLISH -11 Preparation 10-E NGLISH If using this projector at high elevations (above 1 400 m), set the “FAN CONTROL” to “HIGH”. (Refer to page 43.
12-E NGLISH E NGLISH -13 Preparation # Air outlet port Do not cover this port. $ Connector panel (page 13) % Power input socket (AC IN) (page 22) The accessory power cord is connected here. Do not use any power cord other than the accessory power cord.
E NGLISH -15 Preparation 14-E NGLISH # $ % & '() * + P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY PICTURE MODE LCD PROJECT OR V I D E O C M P N T COMPONENT KEYSTONE * ' ( & 0 1 ) / , - .
E NGLISH -17 16-E NGLISH Setting-up Pr ojection methods In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the “ OPTION ” menu.
E NGLISH -19 Getting started 18-E NGLISH Connections Notes on connections B Read the instruction manual for each system component carefully before connecting it.
E NGLISH -21 Getting started 20E NGLISH Connecting to computer NOTE: B Shut down the computer before turning off the MAIN POWER switch of the projector.
P C POWER LIGHT INPUT ENTER MENU FREEZE NORMAL ASPECT USER MEMORY PICTURE MODE V I D E O C M P N T COMPONENT KEYSTONE ˛ $ ˛ & ˛ ' ˛ ' ˛ # ˛ ( ˛ ) E NGLISH -23 Basic operation 22-E NGLISH T urning on the power Before turning on the power 1, Ensure that all components are connected properly.
E NGLISH -25 Basic operation 24-E NGLISH T urning off the power Press the PO WER button. B “ POWER OFF ” is displayed on the screen. Press the I I or H H b utton to select “OK”, and then press the ENTER b utton. B The lamp unit will switch off and the picture will stop being projected.
E NGLISH -27 26-E NGLISH Correcting ke ystone distor tion (KEYST ONE) When either the projector or the screen is tilted, the keystone distortion will affect the image. You can correct the image proportions by the following procedure. Projector control panel Press the KEYSTONE button.
E NGLISH -29 Useful functions 28-E NGLISH NOTE: B If a selected mode does not match the aspect ratio of the input signal, it may affect the quality of viewing of the original picture.
E NGLISH -31 Useful functions 30-E NGLISH NOTE: B Only the settings saved in the “ MEMORY SAVE ” menu will be displayed in the “ MEMORY LOAD ” menu. B The “ MEMORY LOAD ” menu will be displayed. Press the F or G button to select the setting you want to retrieve, then press the ENTER button.
E NGLISH -33 Adjustments and settings 32-E NGLISH On-screen menus Menu screens The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus. The general arrangement of these menus is shown below.
& Press the F F or G G button to select an item, and then press the I I or H H button to change or adjust the setting. An individual adjustment screen such as the one shown below will be displayed for bar scale items. The bar scale will turn green when any adjustment changes the setting from the factory set value.
E NGLISH -37 Adjustments and settings 36-E NGLISH Adjusting the picture Press the F or G button to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment.
E NGLISH -39 Adjustments and settings 38-E NGLISH MEMOR Y SA VE Press the ENTER button to display the “ MEMORY SAVE ” menu. The settings adjusted in “ PICTURE ” menu can be saved. Press the F or G button to select the number in which you want to save the setting, and then press the ENTER button.
E NGLISH -41 Adjustments and settings 40-E NGLISH Adjusting the position Press the F or G button to select an item, and then press the I or H button to change the setting. For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then Press the I or H button to make the adjustment.
E NGLISH -43 Adjustments and settings 42-E NGLISH Option settings Press the F or G button to select an item, and then press the I or H button to change the setting. OSD ON The signal name is displayed in the top-right corner of the screen when the input signal is changed.
Care and maintenance 44-E NGLISH E NGLISH -45 When the TEMP indicator and the LAMP indicator are illuminated There are two indicators on the control panel of the projector which give information about the operating condition of the projector.
Care and maintenance E NGLISH -47 46-E NGLISH NOTE: B Place the projector on top of a soft cloth so that it will not become scratched. NOTE: B Be sure to install the air filter before using the projector.
Care and maintenance E NGLISH -49 48-E NGLISH Lamp unit replacement procedure # Turn off the MAIN POWER switch according to the procedure given in “Turning off the power” on page 24, and then disconnect the power cord plug from the wall outlet and check that the area around the lamp unit has cooled down.
E NGLISH -51 Care and maintenance 50-E NGLISH Bef ore calling f or service Before calling for service, check the following points. Problem Possible cause Page Power does not turn on. No picture appears. The picture is fuzzy. COLOR is too light or TINT is poor.
Others E NGLISH -53 52-E NGLISH Specifications Power supply: 100 V – 240 V ~, 50 Hz/60 Hz Power consumption: 180 W [During standby (when fan is stopped): Approx.
Others E NGLISH -55 54-E NGLISH Appendix *1 The “i” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality.
E NGLISH -57 Others 56-E NGLISH B The pin layout and signal names for the DVI-D input connector are shown below. (interface with TMDS connector on a personal computer) External view Pin No. Signal Pin No. Signal # T.M.D.S data 2- / T.M.D.S data 3+ $ T.
58-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac kno wledgements B VGA and XGA are trademarks of International Business Machines Corporation. B S-VGA is a registered trademark of the Video Electronics Standards Association.
Een belangrijk punt na aankoop van elk apparaat Panasonic PT-AE500U (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic PT-AE500U heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic PT-AE500U vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic PT-AE500U leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic PT-AE500U krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic PT-AE500U bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic PT-AE500U kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic PT-AE500U . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
