Gebruiksaanwijzing /service van het product WV-NP244 van de fabrikant Panasonic
Ga naar pagina of 24
Network camera Operating Instructions Model No. WV -NP244 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
The lightning flash with arrow- head symbol, within an equilater- al triangle, is intended to alert the user to the presence of uninsulat- ed "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to consti- tute a risk of electric shock to persons.
3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
4 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
5 Preface The network camera WV-NP244 is designed to operate using a PC on a network (10BASE- T/100BASE-TX) to monitor images. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.
6 T rademarks and Registered T rademarks • Microsoft, Windows and Windows XP are registered trademarks of Microsoft Cor- poration in the U.S. and/or other coun- tries. • Intel is a registered trademark and Pentium is a trademark of Intel Corpo- ration or its subsidiaries in the United States and other countries (regions).
7 CONTENTS Important Safety Instructions ................................................................................................. .... 3 Limitation of Liability .................................................................................
8 Precautions Refer to all work related to the installation of this product to qualified service person- nel or system installer. Do not attempt to disassemble the prod- uct. There are no serviceable parts inside. Contact the qualified service personnel for maintenance.
9 Otherwise, the camera may not work properly or performance deterioration may be caused. • Images saved on the SD memory card may lead to personal information leak- age. When it is necessary to give the camera to someone, even when for repair, make sure the SD memory card is removed from the camera.
10 Major Operating Controls and Their Functions q Tripod mount base w Flange-back adjusting ring* e ALC lens connector r Lens (option) t Focus fixing screw (LOCK) y Microphone u SD card memory slot * It is necessary to adjust the flange-back length together with the lens adjustment.
11 <REAR> q Power indicator (green) w Link indicator e Monitor out connector (for adjustment) (ø3.5 mm, mini jack) r INITIAL SET button t External I/O terminals y Ground terminal u Access indic.
12 Lens Mounting Mount the lens by rotating it clockwise slowly. Then, connect the lens cable to the ALC lens connector of the camera. Lens type Model number ALC lens for 1/3 inch CCD cameras Super wi.
13 How to use a vari-focal lens The following are descriptions of how to use a 2x vari-focal lens. Method of adjustment may be different depending on the lens in use. For further information, refer to the operating instructions of the lens in use. q Loosen the zoom lock knob and slide it to the "T" end.
14 Installations/Connections Before start the installation/connection, prepare the required devices and cables. Before starting the connection, turn the power of the devices including the camera and the PC off or disconnect the AC adapters from the outlet.
15 Important: • Use all of 4 pairs (8 pins) of the LAN cable. • The maximum cable length is 100 m. • Make sure that the PoE device in use is compliant with IEEE802.3af standard. • When connecting both the AC 24 V/DC 12 V power supply and the PoE device for power supply, PoE will be used for power supply.
16 [Connection example] When connecting with a PC directly <Required cable> LAN cable (category 5, cross) When connecting to a network using a PoE device (hub) <Required hardware> Switchin.
How to insert an SD memory card Important: • Before inserting an SD memory card, make sure that the power of the camera is turned off. • Insert an SD memory card backside up.
18 Performing the Network Settings Install the software Before installing the software, read the readme file on the provided CD-ROM first. Software included on the provided CD-ROM • Panasonic IP Setting software Configure the network settings of the camera using this software.
19 Step 3 Complete each network setup item and click the [Apply] button. Important: • It may take for around 30 seconds to complete to upload the settings to the camera after clicking the [Apply] button. The settings may be invalidated when the AC adapter or the LAN cable is dis- connected before completing the upload.
20 T roubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not described below.
21 Specifications Other specifications Power source AC 24 V or DC 12 V, PoE (DC 48 V) Power consumption AC 24 V 60 Hz 4.8 W, DC12 V: 400 mA PoE: 4.2 W (Class 2 device) Ambient temperature –10 °C - +50 °C Ambient humidity 90 % or less Monitor output (for adjustment) VBS: 1.
22 Audio compression method G.726 (ADPCM) 32 kbps/16 kbps Bandwidth Control 64 kbps/128 kbps/256 kbps/512 kbps/1 024 kbps/2 048 kbps/ 4 096 kbps/Unlimited Protocol TCP/IP, UDP/IP, HTTP, RTP, FTP, SMTP.
23 Standard Accessories CD-ROM* ....................................................... 1 pc. Operating Instructions (this book) ................. 1 pc. Code Label .................................................... 1 pc. Warranty ...................
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N.
Een belangrijk punt na aankoop van elk apparaat Panasonic WV-NP244 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic WV-NP244 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic WV-NP244 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic WV-NP244 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic WV-NP244 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic WV-NP244 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic WV-NP244 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic WV-NP244 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.