Gebruiksaanwijzing /service van het product 1060rc van de fabrikant Patton electronic
Ga naar pagina of 28
USER MANUAL MODEL 1060RC AC Powered, Asynchronous Short Range Modem: Rack Mount Card SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1060RC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1060RC components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
3.0 CONFIGURA TION This section describes the location and orientation of the Model 1060RC's configuration switches and provides detailed instructions on setting each of the switches. 3.1 FRONT CARD CONFIGURA TION The Model 1060RC uses a set of eight DIP switches that allow configuration to a wide range of asynchronous applications.
3.0 CONFIGURA TION This section describes the location and orientation of the Model 1060RC's configuration switches and provides detailed instructions on setting each of the switches. 3.1 FRONT CARD CONFIGURA TION The Model 1060RC uses a set of eight DIP switches that allow configuration to a wide range of asynchronous applications.
Control Input (C in ): The Control Input signal is used by the local Model 1060RC as an input signal to “turn on” (in the “Enabled” settings) and allow data transmission to the remote device. This is required for half-duplex/ switched-carrier environments as well as in hardware flow control applications.
Control Input (C in ): The Control Input signal is used by the local Model 1060RC as an input signal to “turn on” (in the “Enabled” settings) and allow data transmission to the remote device. This is required for half-duplex/ switched-carrier environments as well as in hardware flow control applications.
3.4 REAR CARD CONFIGURA TION The 1060RC has four interface card options: DB-25/RJ-1 1, DB-25/RJ-45, RJ-45/RJ-1 1 and dual RJ-45. Each of these options supports one RS-232 connection and one 4-wire connection (the RS- 232 port is always the lower port on the interface card).
3.4 REAR CARD CONFIGURA TION The 1060RC has four interface card options: DB-25/RJ-1 1, DB-25/RJ-45, RJ-45/RJ-1 1 and dual RJ-45. Each of these options supports one RS-232 connection and one 4-wire connection (the RS- 232 port is always the lower port on the interface card).
The table below provides an overview of strap functions for the DB- 25/modular cards. Following this overview is a detailed description of each strap's function.
The table below provides an overview of strap functions for the DB- 25/modular cards. Following this overview is a detailed description of each strap's function.
SGND & FRGND (JB5) This strap pertains to the DTE interface, which is a 10-position modular RJ-45 jack. In the connected (closed) position, this strap links modular pin 5 (Signal Ground) and frame ground. In the open (disconnected) position, pin 5 is "lifted" from frame ground.
SGND & FRGND (JB5) This strap pertains to the DTE interface, which is a 10-position modular RJ-45 jack. In the connected (closed) position, this strap links modular pin 5 (Signal Ground) and frame ground. In the open (disconnected) position, pin 5 is "lifted" from frame ground.
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a "hot swappable" rack, it is not necessary for any cards to be installed before switching on the power supply .
Switching the Power Supply On and Off The power supply on/off switch is located on the front panel. When plugged in and switched on, a red front panel LED will glow . Since the Model 1000R16 is a "hot swappable" rack, it is not necessary for any cards to be installed before switching on the power supply .
RJ-45 SIGNAL PIN# COLOR COLOR PIN# SIGNAL GND 2 Orange .............Brown 7 GND RCV - 3 Black ................Green 5 XMT - XMT+ 4 Red ..................Y ellow 6 RCV+ XMT - 5 Green ...............Black 3 RCV - RCV+ 6 Y ellow ..............Red 4 XMT+ GND 7 Brown .
RJ-45 SIGNAL PIN# COLOR COLOR PIN# SIGNAL GND 2 Orange .............Brown 7 GND RCV - 3 Black ................Green 5 XMT - XMT+ 4 Red ..................Y ellow 6 RCV+ XMT - 5 Green ...............Black 3 RCV - RCV+ 6 Y ellow ..............Red 4 XMT+ GND 7 Brown .
5.2 POWER-UP There is no power switch on the Model 1060RC: Power is automatically applied to the 1060RC when its card-edge connector makes contact with the chassis' mid-plane socket, or when the chassis' power supply is turned on.
5.2 POWER-UP There is no power switch on the Model 1060RC: Power is automatically applied to the 1060RC when its card-edge connector makes contact with the chassis' mid-plane socket, or when the chassis' power supply is turned on.
APPENDIX A SPECIFICA TIONS T ransmission Format: Asynchronous External Interface: RS-232C/CCITT V .24 connection via DB-25 female; EIA/TIA-561 connection via RJ-45 (10 wire); twisted pair connection v.
APPENDIX A SPECIFICA TIONS T ransmission Format: Asynchronous External Interface: RS-232C/CCITT V .24 connection via DB-25 female; EIA/TIA-561 connection via RJ-45 (10 wire); twisted pair connection v.
APPENDIX C F ACTOR Y REPLACEMENT P ARTS The Patton Model 1060RC rack system features interchangeable rear half cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers and descriptions for these parts are listed below: Patton Model # Description 1000RPEM .
APPENDIX C F ACTOR Y REPLACEMENT P ARTS The Patton Model 1060RC rack system features interchangeable rear half cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers and descriptions for these parts are listed below: Patton Model # Description 1000RPEM .
APPENDIX E BLOCK DIAGRAM Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful.
.
.
.
APPENDIX E BLOCK DIAGRAM Dear V alued Customer , Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you find this user manual helpful.
Een belangrijk punt na aankoop van elk apparaat Patton electronic 1060rc (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Patton electronic 1060rc heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Patton electronic 1060rc vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Patton electronic 1060rc leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Patton electronic 1060rc krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Patton electronic 1060rc bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Patton electronic 1060rc kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Patton electronic 1060rc . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
