Gebruiksaanwijzing /service van het product 3201 van de fabrikant Patton electronic
Ga naar pagina of 132
Model 3201 and Model 3241 G.SHDSL Router Modems User Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.
Patton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA tel: +1 (301) 975-1000 fax: +1 (301) 869-9293 support: +1 (301) 975-1007 url: www .patton.com e-mail: support@patton.com Copyright © 2002 & 2003, Patton Electronics Company .
1 Contents Contents ......................................................................................................................................................... 1 Compliance Infor mation ...................................................
Contents Model 3201 G.SHDSL Integrated Access Device User Guide 2 What you will need .........................................................................................................................................22 Identify the connectors and attach the cables .
3 Model 3201 G.SHDSL Integrated Access Device User Guide Contents Remote side configuration ..............................................................................................................................98 Central side configuration ...
Contents Model 3201 G.SHDSL Integrated Access Device User Guide 4 RJ-11 non-shielded port ......................................................................................................................................122 RJ-45 non-shielded RS-232 console port (EIA-561) .
5 Compliance Information Radio and TV Interference The M odel 3201 or 3241 generates and uses radio frequency energy , and if not installed and used properly- that is, in strict accordance with the manufactur er’ s instructions-may cause inter ference to radio and television reception.
Compliance Information Model 3201 G.SHDSL Integrated Access Device User Guide 6 3. If your M odel 3201 or 3241 causes harm to the telephone network, the telephone company may tempo- rarily discontinue your service.
7 About this guide This guide describes installing and configuring a P atton Electronics M odel 3201 or 3241 G.SHDSL Router modem. The instructions in this guide are based on the following assumption.
About this guide Model 3201 G.SHDSL Integrated Access Device User Guide 8 Precautions N otes and cautions, which have the following meanings, are used throughout this guide to help y ou become aware of potential Router modem pr oblems. W arnings relate to personal injury issues, and Cautions refer to potential property damage.
9 Model 3201 G.SHDSL Integrated Access Device User Guide About this guide T ypographical conventions used in this document This section describes the typographical conventions and terms used in this guide.
About this guide Model 3201 G.SHDSL Integrated Access Device User Guide 10.
11 Chapter 1 General Information Chapter contents Model 3201/3241 G.SHDSL Router Modem overview ........................................................................................12 General attributes .............................................
1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 12 Model 3201/3241 G.SHDSL Router Modem overview Model 3201/3241 G.SHDSL Router Modem overview The P atton Models 3201 and 3241 r outer modems are G.
Model 3201/3241 G.SHDSL Router Modem overview 13 Model 3201 G.SHDSL Integrated Access Device User Guide 1 • General Information Protocol support • Complete internetworking with IP (RFC 741), T CP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826).
1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 14 Front Panel Status LEDs Front Panel Status LEDs The DiamondLink routers hav e all status LEDs on the front panel of the unit, and all electrical connections are located on the rear panel.
Front Panel Status LEDs 15 Model 3201 G.SHDSL Integrated Access Device User Guide 1 • General Information Power input connector The router modem comes with an AC or DC po wer supply . (see “P ower and P ower S upply Specifications ” on page 117) • The power connection to the r outer modem is a 2.
1 • General Information Model 3201 G.SHDSL Integrated Access Device User Guide 16 Front Panel Status LEDs Console port (outlined in red) The unshielded RJ-45 RS-232 console DCE port (EIA-561) with t.
17 Chapter 2 Product Over view Chapter contents Product Overview ..................................................................................................................................................18 Applications Overview ...............
2 • Product Overview Model 3201 G.SHDSL Integrated Access Device User Guide 18 Product Overview Product Overview The M odel 3201 modem operates as a bridge or a router and has two ports for communication: • The Ethernet port—Connects to the LAN side of the connection • The Line port—Pr ovides the G.
Product Overview 19 Model 3201 G.SHDSL Integrated Access Device User Guide 2 • Product Overview the administrator desires management through a web br owser . Then an IP address is necessary for the administrator to access the 3201 modem. In a typical bridged configuration , the DSL bridge is transparent to the network.
2 • Product Overview Model 3201 G.SHDSL Integrated Access Device User Guide 20 Product Overview.
21 Chapter 3 Quick Star t Installation Chapter contents Hardware installation ............................................................................................................................................22 What you will need ...........
3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 22 Hardware installation Hardware installation If you are alr eady familiar with Model 3201/3241 Router M odem installation and configuration, this chapter will enable you to finsh the job quickly .
Hardware installation 23 Model 3201 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation 7. A message will display , “Login S uccessful.” By typing the character “?”, all the commands will be dis- played. Any command’ s parameters may be seen by entering the command followed by a space and a ques- tion mark.
3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 24 Hardware installation Router/Bridge Status LEDs The LEDs indicate the status of power , the W AN (DSL) inter-modem link, and the Ethernet connection. Note When extinguished, the LED indicators are clear; when lit, they shine a brilliant yellow .
Hardware installation 25 Model 3201 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation The M odel 3201 home page displays (see F igure 5). Figure 5. Model 3201 home page The M odel 3201/3241 menu structure is shown in figur e 6 on page 26.
3 • Quick Start Installation Model 3201 G.SHDSL Integrated Access Device User Guide 26 Hardware installation Figure 6. Model 3201/3241 Menu Structure.
27 Chapter 4 Basic Application Configurations Chapter contents Introduction ..........................................................................................................................................................28 Two stand-alone units directly connected .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 28 Introduction Introduction The basic applications are divided accor ding to whether the application is bridged or routed. The bridged applications are RFC 1483 Bridged , PPP oA Bridged , and HDL C Bridged .
Two stand-alone units directly connected 29 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations T wo stand-alone units directly connected Ethernet Extension (.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 30 Two stand-alone units directly connected V erify the settings to be: – Interface = 1 – LLC header mode = dialout – LLC header mode = off – HDLC header mode = on – N o authentication – Leave U ser name and P assword blank.
Two stand-alone units directly connected 31 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Change T erminal T ype to Central and I nterface T ype to hdlc . Click on the Configure button. In the A ction submenu under G.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 32 Two stand-alone units directly connected – LLC header mode = off – HDLC header mode = on – N o authentication – Leave U ser name and P assword blank.
Two stand-alone units directly connected 33 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 34 Two stand-alone units directly connected Click on Configure .
Two stand-alone units directly connected 35 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Configuration Menu > Configuration > IP Routes >.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 36 Two stand-alone units directly connected 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.
Two stand-alone units directly connected 37 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on G.SHDSL in the Configuration Menu > Configuration > verify that T erminal T ype is remote and Interface T ype is “ hdlc .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 38 DSLAM Connections with remote CPE units – Cost:1 – Interface:[blank] 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status . The Modem S tate should be “ deacti- vated.
DSLAM Connections with remote CPE units 39 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Model 3201 (R emote) Configuration S teps (RFC 1483 Bridged) F rom the command line interface (CLI) via the RS-232 control port, → ip list interfaces One IP interface is called ip1 with an IP address of 192.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 40 DSLAM Connections with remote CPE units Change T erminal T ype to Remote and Interface T ype to atm . Click on the Configure button. In the A ction submenu under G.
DSLAM Connections with remote CPE units 41 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations In the A ction submenu under G.SHDSL, change Action to Deactivate , then click on Action . Return to A ction, select Start and click on Action .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 42 DSLAM Connections with remote CPE units In the Description field, enter the description y ou wish.
DSLAM Connections with remote CPE units 43 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Model 3201 (C entral) Configur ation Steps (PPP oH Bridged) F rom the command line interface (CLI) via the RS-232 control port, → ip list interfaces One IP interface is called ip1 with an IP address of 192.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 44 DSLAM Connections with remote CPE units PPPoA Bridged (RFC 2364) Configuration The user data for transmission is in the form of IP packets but encapsulated in a PPP packet, transmitted and received through a PPP session to the connection.
DSLAM Connections with remote CPE units 45 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – VPI = 0 – V CI = 300 – LLC header mode = off – HDLC header mode = off – N o authentication – Leave U ser name and P assword blank.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 46 DSLAM Connections with remote CPE units – N o authentication – Leave U ser name and P assword blank. Click on Apply . 3. Go to G.SHDSL in the Configuration M enu, then the submenu Configuration.
DSLAM Connections with remote CPE units 47 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 48 DSLAM Connections with remote CPE units In the Description field, enter the description y ou wish. In this example, it is called RFC 1483 Routed . Change the configuration parameters to match the following.
DSLAM Connections with remote CPE units 49 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations The other fields should be: – Destination:0.0.0.0 – Gateway:192.168.164.3 – Mask:0.0.0.0 – Cost:1 – Interface:[blank] 4.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 50 DSLAM Connections with remote CPE units Change the IP address so it is in the same subnet as the laptop PC. The laptop ’ s IP address is 192.168.172.229, so in this example, change the IP address of the 3201 to 192.
DSLAM Connections with remote CPE units 51 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Action > S elect deactivate for Action > Click on the A ction button. 2. On the M enu, go to Configuration, then to W AN Connections.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 52 DSLAM Connections with remote CPE units 3. Configuration M enu > Configuration > IP Routes >.
DSLAM Connections with remote CPE units 53 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 54 DSLAM Connections with remote CPE units One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in the same subnet as the Desktop PC.
DSLAM Connections with remote CPE units 55 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – U sername:[blank] – P assword:[blank] Click on Configure .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 56 DSLAM Connections with remote CPE units 4. Configuration M enu > Configuration > IP Routes >.
DSLAM Connections with remote CPE units 57 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 5. Go to G.SHDSL in the Configuration M enu, then the submenu Status. The M odem State should be “ deactivated.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 58 DSLAM Connections with remote CPE units 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.
DSLAM Connections with remote CPE units 59 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 3. Go to Configuration M enu > Configuration > W AN connections > Edit (for PPP oH Routed service) > Edit ‘IP Interface ’ > I paddr: [enter the W AN IP Address, in this example = 192.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 60 DSLAM Connections with remote CPE units PPPoA Routed (RFC 2364) This routed application is very similar to the PPP oA Bridged application.
DSLAM Connections with remote CPE units 61 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 62 DSLAM Connections with remote CPE units 3. In the Configuration M enu, click on Configuration then &g.
DSLAM Connections with remote CPE units 63 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations – Disco ver Primary DNS:true – Disco ver Secondary DNS:tr ue – Give DNS to R elay:tr ue – Give DNS to Client:true – Remote DNS:0.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 64 DSLAM Connections with remote CPE units – Class:UBR – P ort:atm Click on the Change button if changes were made. 5. Click on Edit ‘IP Interface.’ V erify or change if necessar y the following O ptions parameters.
DSLAM Connections with remote CPE units 65 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. Click on G.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 66 DSLAM Connections with remote CPE units 2. On the M enu, go to Configuration, then to W AN Connections Delete both default W AN ser vices already defined.
DSLAM Connections with remote CPE units 67 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Configure .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 68 DSLAM Connections with remote CPE units – MR U: 0 – IP Addr from IPCP: true – Disco ver Primary DNS: false – Disco ver Secondary DNS: false – Give DNS to R elay: false – Give DNS to Client: false – Remote DNS: 0.
DSLAM Connections with remote CPE units 69 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations Click on Change button.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 70 DSLAM Connections with remote CPE units 4. Click on Edit ‘ A TM Channel.
DSLAM Connections with remote CPE units 71 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 5. Click on Edit ‘IP Interface.’ V erify or change if necessar y the following O ptions parameters. – I paddr:192.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 72 DSLAM Connections with remote CPE units 7. F rom the Configuration Menu, click on Configuration > A uthentication > Create a new user > enter the information for the following parameters in the webpage D etails for the new user .
DSLAM Connections with remote CPE units 73 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 1. N ow you can bring up the web-page management system on your bro wser by entering the IP address of the 3201. 2.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 74 DSLAM Connections with remote CPE units 3. Returning to the 3201 Configuration M enu, click on Configuration, then IP Routes. – Click on “Create new I p V4 Route.
DSLAM Connections with remote CPE units 75 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 4. Go to G.SHDSL in the Configuration M enu, then the submenu Configuration. Change T erminal T ype to Central and I nter face T ype to atm .
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 76 DSLAM Connections with remote CPE units Model 3201 (C entral) Configur ation Steps (IP oA Routed) F rom the command line interface (CLI) via the RS-232 control port: → ip list interfaces One IP interface was called ip1 with an IP address of 192.
DSLAM Connections with remote CPE units 77 Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations 3. Returning to the 3201 Configuration M enu, click on Configuration, then IP Routes. Click on “Create new I p V4 Route.
4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 78 DSLAM Connections with remote CPE units.
79 Chapter 5 Specialized Configurations Chapter contents IP Configurations ..................................................................................................................................................80 Router ...................
5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 80 IP Configurations IP Configurations The router can be configured to use the RIP routing pr otocol, version 1 or 2, for accepting and sending RIP packets. Router RIP and RIPv2 Static R oute 1.
IP Configurations 81 Model 3201 G.SHDSL Integrated Access Device User Guide 5 • Specialized Configurations DHCP Server and Relay The DHCP Server or Relay are simply configur ed via the web page management pages. 1. Go to > Configuration M enu > Configuration > DHCP Ser ver and the DHCP S er ver page is displayed.
5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 82 IP Configurations 3. Clicking on Advanced Options offers additional options for configuration. They are displayed in the following figure. 4. The router modem may be used as a DHCP Relay Agent if desir ed.
IP Configurations 83 Model 3201 G.SHDSL Integrated Access Device User Guide 5 • Specialized Configurations DNS Relay M ode In the DNS R elay web page, up to 10 DNS server addresses may be added to utilize the DNS servers already being used by the network.
5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide 84 IP Configurations.
85 Chapter 6 Security Chapter contents Introduction ..........................................................................................................................................................86 Configuring the router ...................
6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 86 Introduction Introduction Security pro vides the ability to setup and enforce security policies. The policies define the types of traffic per- mitted to pass through a gateway , either inbound, outbound, or both, and from which origins the traffic may be allowed to enter .
Configuring the security interfaces 87 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security The next step in configuring the router is adding the default gateway route. Since the W AN IP address of the 3201 modem at the CO site is 192.
6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 88 Configuring the security interfaces 4. Add one more security interface by r epeating step 2. 5. Select N ame of the LAN por t ( ip1 ) and Interface T ype to be inter nal . Click on Apply .
Enabling the Firewall 89 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security F irewall P olicies: ID | Name | Type 1 | Type 2 | Validator Allow Only ---------------------------------.
6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 90 Security Triggers T o allow pings between the two PCs: 1. F rom the Configuration Menu, > Configuration > S ecurity > Fir e wall P olicy Configuration > P ort Filters > Add Raw IP F ilter 2.
Intrusion Detection System (IDS) 91 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security After configuring the FTP portfilter , you can open an ftp session from R emote to Local, however you can issue ftp commands (e.g., login, cd, etc.
6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 92 Intrusion Detection System (IDS) 1. T o enable IDS, click on Enabled for “Intrusion Detection Enabled” on the “S ecurity Interface Configura- tion ” page. Then click on Change State(s) .
Intrusion Detection System (IDS) 93 Model 3201 G.SHDSL Integrated Access Device User Guide 6 • Security firewall before a SYN F lood is detected. SYN Flood is a DOS attack. When establishing normal TCP connections, three packets are ex changed: (1) A SYN (synchronize) packet is sent from the host to the network server .
6 • Security Model 3201 G.SHDSL Integrated Access Device User Guide 94 Intrusion Detection System (IDS).
95 Chapter 7 NA T (Network Address T ranslation) Chapter contents Introduction ..........................................................................................................................................................96 Creating an Ethernet Transport .
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 96 Introduction Introduction N etwork Address T ranslation (NA T ) pro vides unlimited local host addresses, enabling users to connect to the Internet without having to pro vide a new address for each and every host.
Creating a DSL Link 97 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) • DSL data rates should be the same for Remote and Central units Central Side Configuration F rom the WWW interface, do the following: 1.
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 98 Creating an ATM Routable Link Creating an A TM Routable Link N ow that you have a DSL link, do the following to configur e a W AN ser vice. Remote side configuration F rom the WWW interface: 1.
Creating a route for Remote and Central PCs 99 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) 9. Click Action. 10. Save the configuration. Do the follo wing to confirm that the A TM link is working properly: • V erify that the DSL W AN LED is lit.
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 100 Creating a route for Remote and Central PCs 5. Click OK . Do the follo wing to confirm that the new route is working properly: • V erify that the DSL W AN LED is lit.
NAT Configuration 101 Model 3201 G.SHDSL Integrated Access Device User Guide 7 • NAT (Network Address Translation) NA T Configuration F rom the WWW interface: 1. Click Security . 2. Enable Security , then click the W eb browser ’ s refresh button to display the change.
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide 102 NAT Configuration 7. Add P or t N umber 80. Y ou should be able to reach the web interface from the Central side using the Ethernet IP addr ess.
103 Chapter 8 Monitoring Status Chapter contents Status LEDs...........................................................................................
8 • Monitoring Status Model 3201 G.SHDSL Integrated Access Device User Guide 104 Status LEDs Status LEDs The LEDs indicate the status of the P ow er , the W AN (DSL) inter-modem link, and the Ethernet connection. All LED indicators will present the same looking profile (e.
105 Chapter 9 Diagnostics and Software Upgrades Chapter contents Ping .....................................................................................................................................................................106 Software Upgrades .
9 • Diagnostics and Software Upgrades Model 3201 G.SHDSL Integrated Access Device User Guide 106 Ping Ping The ping command is executed from the Command Line I nter face (CLI). P ing in the 3201/3241 is executed from the “ip ” command. H ere is the ping format followed by a valid r esponse.
Software Upgrades 107 Model 3201 G.SHDSL Integrated Access Device User Guide 9 • Diagnostics and Software Upgrades –K e y – Initbun – Im.conf – Tftpupdt.rbt – Tftpupdt.end – Script.bat 2. Connect the control (console) port of the unit to a PC.
9 • Diagnostics and Software Upgrades Model 3201 G.SHDSL Integrated Access Device User Guide 108 Software Upgrades.
109 Chapter 10 Contacting Patton for assistance Chapter contents Introduction ........................................................................................................................................................110 Contact information .
10 • Contacting Patton for assistance Digital Modem Adapter Getting Started Guide 110 Introduction Introduction This chapter contains the following information: • “Contact information ”—describes how to contact P A T T ON technical support for assistance.
Warranty Service and Returned Merchandise Authorizations (RMAs) 111 Digital Modem Adapter Getting Started Guide 10 • Contacting Patton for assistance Return for credit policy • Less than 30 days: N o Charge. Y our credit will be issued upon receipt and inspection of the equipment.
10 • Contacting Patton for assistance Digital Modem Adapter Getting Started Guide 112 Warranty Service and Returned Merchandise Authorizations (RMAs).
113 Appendix A Specifications Chapter contents General Characteristics ........................................................................................................................................114 G.SHDSL Characteristics (Model 3201/3241) .
A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 114 General Characteristics General Characteristics • Compact low-cost plug-and-play router • 10/100 Ethernet • U nlimited host support. • Comprehensive har dware diagnostics, works with any operating system, easy maintenance and effortless installation.
Protocol Support 115 Model 3201 G.SHDSL Integrated Access Device User Guide A • Specifications Protocol Support • Complete internetworking with IP (RFC 741), T CP (RFC 793), UDP (RFC 768), ICMP (RFC 950), ARP (RFC 826).
A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 116 Management • Enhanced ILMI 4.0 for auto-configuration of A TM PVCs. • FRF .12 F rame Relay F ragmentation support, LMI For F rame Relay PV C Link Management, FRF .5 F rame Relay to A TM N etwork internetworking, and FRF .
Dimensions 117 Model 3201 G.SHDSL Integrated Access Device User Guide A • Specifications Dimensions 1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm) Power and Power Supply Specifications The 3201 may come with either an AC or DC po wer supply . • The supply ’ s connection to the 3201 is a 2.
A • Specifications Model 3201 G.SHDSL Integrated Access Device User Guide 118 Power and Power Supply Specifications • Isolation 500 VDC • Environment 0–50°C; 5–95% relativ e humidity , non-condensing • Size 3.
119 Appendix B Cable Recommendations Chapter contents DSL Cable ...........................................................................................................................................................120 Ethernet Cable .............
B • Cable Recommendations Model 3095 mDSL DACS Getting Started Guide 120 DSL Cable DSL Cable 10 foot (3 m), RJ-11/RJ-11 (refer to “RJ-11 non-shielded port” on page 122) Ethernet Cable Ethernet c.
121 Appendix C Physical Connectors Chapter contents RJ-45 shielded 10/100 Ethernet port ...................................................................................................................122 RJ-11 non-shielded port ....................
C • Physical Connectors Model 3201 G.SHDSL Integrated Access Device User Guide 122 RJ-45 shielded 10/100 Ethernet port RJ-45 shielded 10/100 Ethernet port Assuming the MDI-X switch is in the out position. RJ-11 non-shielded port Single twisted-pair (TP) for full-duplex transmission.
123 Appendix D Command Line Inter face (CLI) Operation Chapter contents Introduction ........................................................................................................................................................124 CLI Terminology .
D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 124 Introduction Introduction The modem configuration and status can also be view and modified through the console, which is accessible through the RS-232 serial port or through a T elnet session over Ethernet.
CLI Terminology 125 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation Using the Console The console commands needed for the various modes of operation are described in later sections. I n this sub- section are the most basic commands needed for console operation.
D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 126 Administering user accounts The <name> of the interface. In this instance the interface name is ip1. It is important that you do the “?” inquiry to determine whether additional parameters follow .
Administering user accounts 127 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation The following information is returned: Users: May May Access ID | Name | Conf.
D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 128 Administering user accounts Controlling user access T o set user access for user username, use the command (all on one line): system set user < username > access {default|engineer|superuser} G.
Administering user accounts 129 Model 3201 G.SHDSL Integrated Access Device User Guide D • Command Line Interface (CLI) Operation 3. The interface type needs to be the same to pass data (Interface) 4. Issue the ‘ Action ’ command to start the handshaking process (Action Start) Example: T o set up the units to r un at 2.
D • Command Line Interface (CLI) Operation Model 3201 G.SHDSL Integrated Access Device User Guide 130 Administering user accounts.
Een belangrijk punt na aankoop van elk apparaat Patton electronic 3201 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Patton electronic 3201 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Patton electronic 3201 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Patton electronic 3201 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Patton electronic 3201 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Patton electronic 3201 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Patton electronic 3201 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Patton electronic 3201 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.