Gebruiksaanwijzing /service van het product TC6035AN van de fabrikant Paxar
Ga naar pagina of 20
MONARCH DOS-based PATHFINDER Ultra System TC6035AN Rev. A 7/98 ©1998 Monarch Marking Systems, Inc. All rights reserved..
Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product and the programs and their availability at any time and without notice.
MONARCH DOS-based PATHFINDER Ultra System TC6035AN Rev. A 7/98 ©1998 Monarch Marking Systems, Inc. All rights reserved..
Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product and the programs and their availability at any time and without notice.
7/21/98 Table of Contents i TABLE OF CONTENTS Introduction .......................................................................................... 1-1 About this Manual ...............................................................................
ii Application Notes 7/21/98.
7/21/98 Introduction 1-1 INTRODUCTION The MONARCH® DOS-based PATHFINDER® Ultra® printer is very versatile. In addition to running applications that you write with Microsoft C/C++ 1.52 (described in the Programmer’s Manual ), it can ♦ communicate with a host via a serial communications port.
1-2 Application Notes 7/21/98 Related Documentation The following table describes other manuals for the printer. Manual Description ROM-DOS User Manual Describes the Datalight ROM- DOS operating system that runs on the printer. Equipment Manual Describes how to operate the printer.
7/21/98 Using Memory Cards 2-1 USING MEMORY CARDS You can use an AT-Attachment (ATA) memory card with the appropriate device drivers to add memory to the printer. The card goes in the printer’s PC-card slot. The application treats the memory card as another disk drive.
2-2 Application Notes 7/21/98 2. Enter the following lines in the application’s CONFIG.SYS file: DEVICE=SSELAN.EXE DEVICE=CS.EXE DEVICE=CSALLOC.EXE DEVICE=ATADRV.EXE DEVICE=CARDID.EXE 3. Create the disk image and load it into the printer. 4. Reboot the printer.
7/21/98 Using Radio Cards 3-1 USING RADIO CARDS You can use a radio card with the appropriate device drivers to enable a printer to run radio-frequency (RF) communications, which allow the printers to use wireless radio networks. The card goes in the printer’s PC-card slot.
3-2 Application Notes 7/21/98 2. Place the radio card files and the following files in the application disk image’s root directory: Name Description SSELAN.EXE SystemSoft Socket Services . CS.EXE SystemSoft Card Services . CSALLOC.INI Initialization file for CSALLOC.
7/21/98 Serial Communications 4-1 SERIAL COMMUNIC A TIONS The printer has one RS-232 serial communications port located on the printer’s side. The port is 16450 UART-compatible and supports up to 115k baud. Connector Pinouts The external connection to the port is an 8-pin mini-DIN receptacle.
4-2 Application Notes 7/21/98 Using I/O Routines The SDK does not provide routines for reading and writing to the serial port. Application developers can ♦ write their own routines. These routines must use interrupt 14hex. ♦ use third-party products such as Greenleaf CommLib .
7/21/98 International Configurations 5-1 INTERN A TIONAL CONFIGUR A TIONS To configure the printer for international use, you must configure the keypad and display. Configuring the Display To configure the display for international use, put a reference to the DISPLAY.
5-2 Application Notes 7/21/98 Configuring the Keypad To configure the keypad for international use, you implement a international keypad map. The default keypad map is for the United States. See “ International Keypad Maps ” for more information about these maps.
7/21/98 International Configurations 5-3 International Keypad Maps Below are diagrams showing the characters for the international keypad maps. Each square in the diagram represents a key. The lower-left character in the square is from the default map.
5-4 Application Notes 7/21/98 Turkish Map (Country Code TR) B A B Ç C ç D E H F G H I J Del K L M N Ö O ö a P Q R S T s Ü U ü V W X Y Z P e.
7/21/98 Glossary 1 GLOSSARY Following is a list of terms you must be familiar with to use the information in this manual. Term Definition Application A program written in Microsoft C/C++ 1.52 that runs on the printer. Disk Image A file containing the application and related files put in the printer’s flash memory.
2 Application Notes 7/21/98.
Een belangrijk punt na aankoop van elk apparaat Paxar TC6035AN (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Paxar TC6035AN heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Paxar TC6035AN vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Paxar TC6035AN leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Paxar TC6035AN krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Paxar TC6035AN bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Paxar TC6035AN kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Paxar TC6035AN . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
