Gebruiksaanwijzing /service van het product C1555M-F van de fabrikant Pelco
Ga naar pagina of 67
ADDENDUM Pelco Worldwide Headquarters • 3500 Pelco W ay • Clovis, California 93612 USA • www .pelco.com USA & Canada •T el: 800/289-9100 • Fax: 800/289-9150 International •T el: 1-559/292-1981 • Fax: 1-559/348-1120 Addendum No.
® INSTALLATION/OPERATION System 9770 C1555M-F (10/05).
.
C1555M-F (10/05) 3 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1555M-F (10/05) List of Illustrations 1 CM9770-MXB Mounting Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Mounting the CM9770-MXB on T op of the Mounting Baffle .
C1555M-F (10/05) 5 List of T ables A LEDs Illuminated During a Basic Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 B Data Connections—Single Node Systems Without a Hot Switch .
6 C1555M-F (10/05) Description The System 9770 is a full-featured video matrix switching control system that allows users to view and control up to 2,048 cameras and 512 monitors on a single node.
C1555M-F (10/05) 7 MODELS Controller and CPU Components CM9700-CC1 CPU controller; 120 V AC, 60 Hz or 230 VAC, 50 Hz. CM9700-SER Serial communication card (RS-422 SERCOM); provides 8 communications ports to interface peripheral equipment (4 maximum per CPU).
8 C1555M-F (10/05) Keyboards The following keyboards are compatible with the System 9770: CM9760-KBD Full-function desktop variable-speed keyboard; 120 V AC, 60 Hz. CM9760-KBD-X Same as CM9760-KBD except 230 V AC, 50 Hz. CM9760-KBR Full-function 19-inch EIA rack mount keyboard; 120 V AC, 60 Hz.
C1555M-F (10/05) 9 Installation UNPACKING 1. Unpack and inspect all equipment, and verify delivery according to the packing slip. Before shipping, Pelco connects, tests, and programs each system according to the individual sales order . Contact Pelco immediately if there is any discrepancy in the equipment that you receive.
10 C1555M-F (10/05) MOUNTING Install the System 9770 in EIA-standard 19-inch (48.26 cm) racks. CM9770-MXB 1. Install the CM9770-MXB mounting baffle first (refer to Figure 1). The mounting baffle uses 1 rack unit (RU), and it has front and rear mounting ears, which are attached to the front and rear mounting racks.
C1555M-F (10/05) 11 Figure 2. Mounting the CM9770-MXB on T op of the Mounting Baffle (Optional) Install additional CM9770-MXB mounting trays and matrix bays to the side of and below the first unit, as necessary . 3. Use the RJ-45 data cables supplied with each CM9770-MXB to connect the MXBs to the CC1.
12 C1555M-F (10/05) c. Attach the ear of the rear -mounting support rail to the rear of the equipment rack using four 10-32 x 0.375-inch flat head screws. (The holes in the ear of the rail should align with the threaded holes in the equipment rack.) 4.
C1555M-F (10/05) 13 V IDEO INPUT/OUTPUT CONNECTIONS The following steps provide an overview of how to connect video input and output sources. More complete procedures are provided in the subsequent sections. 1. Install the CM9770-VCC and CM9770-VMC cards in the matrix bay .
14 C1555M-F (10/05) INSTALLING VIDEO INPUT CARDS (CM9770-VCC) The first video input card is inserted into slot 1; the next card is inserted into slot 2 (refer to Figure 4). T o add a video ca rd, slide the card into the first available slot. The CM9770-MXB can contain a maximum of eight viideo input cards.
C1555M-F (10/05) 15 INSTALLING MONITOR OUTPUT CARDS (CM9770-VMC) The monitor output card located in slot 10 is the primary card, and it handles video for monitors 1-16. Refer to Figure 5. Note that the CM9770-MXB will not function without a CM9770-VMC card inserted into slot 10.
16 C1555M-F (10/05) PERFORMING A BASIC LED CHECK Y ou should perform a basic LED check before you connect any video input or output to the matrix bay . The LED check allows you to ensure that the system is operating properly . 1. T urn on the power switch on the rear of the matrix bay .
C1555M-F (10/05) 17 INSTALLING REAR PANEL BNC CARDS The following rear panel cards can be used with the CM9770-MXB matrix bay: • CM9770-RPC—the BNC card for video connections • CM9770-RPM—the .
18 C1555M-F (10/05) Change the T ermination Jumpers on a Rear Panel Video BNC Card In a single-bay , non-looping configuration (up to 256 cameras and 32 monitors), the jumpers must be set in the terminated position.
C1555M-F (10/05) 19 Looping Video When looping video out to another device (such as a DVR, VCR, or switcher), the connection instructions depend on the size of your system, as follows: • In a system containing 32 monitors or fewer (the video is not downframed), use the CM9700-VPP panels to loop the video out.
20 C1555M-F (10/05) Insert or Replace a Rear Panel Monitor BNC Card (CM9770-RPM) 1. Slide the monitor BNC card into the card guides at the rear of the bay . From the rear of the bay , the slot at the far left provides the connection point for the primary monitor output card inserted in the front of the bay into slot 10.
C1555M-F (10/05) 21 V IDEO INPUT/OUTPUT CAPACITY Single Bay A single CM9770-MXB can support up to 256 camera inputs (in increments of 32) and 32 monitor outputs (in increments of 16). Refer to Figure 12. Figure 12. Sample CM9770 System with 256 Cameras and 32 Monitors .
22 C1555M-F (10/05) Multiple Bays, Single Node In a single-node system with one CM9700-CC1 (not networked), you can connect multiple CM9770-MXBs using “sideframing” and “downframing” for a maximum capacity of 2,048 camera inputs and 256 monitor outputs.
C1555M-F (10/05) 23 Figure 14. Sample Sideframing System Using an Output Bay CM9700-CC1 MONITOR 1 OUTPUT BAY TO CM9700-CC1 MONITOR 32 OPTIONAL: ADD CM9770-VCC INPUT CARDS AND BNC INPUT CARDS AS NECESS.
24 C1555M-F (10/05) • Downframing—T o expand the matrix video outputs beyond 32, you can loop the video from the first CM9770-MXB to subsequent CM9770-MXB units for an additional 32 monitor outputs on each matrix bay . Refer to Figure Figure 15..
C1555M-F (10/05) 25 Networked System A networked system with multiple nodes uses an NIU (network interface unit) to combine up to 24 CM9700-CC1 systems into a network—each CC1 system is called a “node.” Multiple CM9770-MXB units can be connected to each CC1 through sideframing and downframing.
26 C1555M-F (10/05) THE POWER SUPPLY MODULE (CM9700-MPS) Y ou can add a backup power supply module (CM9700-MPS) to a System 9770 matrix bay to provide redundancy to the bay’ s power supply . INSTALL A BACKUP POWER SUPPLY 1. Open the matrix bay front cover .
C1555M-F (10/05) 27 HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE The matrix bay is shipped from the factory configured for the correct input power . The power input panel, on the rear panel of the matrix bay, provides two separate power input receptacles, one for each power supply .
28 C1555M-F (10/05) HOW TO T URN OFF THE AUDIBLE POWER SUPPLY ALARM The power supply module contains an audible alarm, which operates in conjunction with the fault LEDs located on the power supply front panel. T o turn off this alarm, complete the following steps: 1.
C1555M-F (10/05) 29 SYSTEM DEVICE CONNECTIONS 1. T urn off power to all system devices and disconnect all power line cords while connecting system devices. 2. Complete the following steps to connect one or more CM9760-KBD system keyboards. a. Connect the keyboard to the CM9505-UPS using the straight cable supplied with the keyboard.
30 C1555M-F (10/05) Figure 22. CM9700-MGR PC Pin-Out Detail 6. Install any additional system peripheral devices. Refer to the manuals for the individual devices for instructions. Refer to the Data Connections section and your Port Assignments table for directions on which port to use for each device.
C1555M-F (10/05) 31 RS-422 COM PORT (“SERCOM”) CONNECTIONS All peripheral equipment in a System 9770 connect through the RS-422 COM ports on the CM9700-CC1 rear panel. (These ports are also known as “sercom” ports, short for “serial communication” ports.
32 C1555M-F (10/05) T able D. Data Connections—Single Node, Hot-Switched System T able E. Data Connections—Networked, Hot-Switched System MXB connection(s) CC1 port 6 and next consecutive ports, as necessary—connected through the hot switch. Hot Switch connection CC1 port 5.
C1555M-F (10/05) 33 Figure 23. Sample CM9770-MXB to CM9700-CC1 Connection Figure 24. Sample CM9770-MXB and CM9700-CC1 Connections in a Networked System CM9700-CC1 CM9770-MXB PIN 1 PIN 8 REVERSED CABLE.
34 C1555M-F (10/05) System Start-Up T o start up your system you must complete the following tasks: 1. Install the CM9700-MGR on a PC connected to the CC1. Refer to System Device Connections in the Installation section for instructions on connecting a PC to the CC1.
C1555M-F (10/05) 35 V ERIFY SYSTEM OPERATION 1. Power up all the remaining equipment. 2. After the CM9700-CC1 loads the configuration files, “SYSTEM 97XX” appears on the CM9760-KBD LCD. 3. Enter the default operator password on the CM9760-KBD keypad.
36 C1555M-F (10/05) DISPLAY THE CM9770-MXB SOFTWARE V ERSION LEVEL T o display the software version level on a system monitor , complete the following steps: 1. Enter the monitor number , and then press the MON key . 2. Enter 999997, and then press the CAM key .
C1555M-F (10/05) 37 Programming Y our System When you open CM9700-MGR, the Getting Started dialog box appears.. Figure 27. Getting Started Dialog Box The CM9700-MGR provides the following configuration options: • Setup Wizard: This option opens the Setup Wizard (a series of dialog boxes), which provides assistance in setting up a new system.
38 C1555M-F (10/05) GETTING HELP USING CM9700-MGR Instructions for how to use CM9700-MGR are provided throughout the software. The CM9700-MGR provides wizards to help users complete tasks, such as adding a device or a group. Each wizard screen contains instructions and explanatory text.
C1555M-F (10/05) 39 Operation A brief description of System 9770 operation is provided here. OPERATING Y OUR SYSTEM 9770 System 9770 can be operated with a CM9760-KBD or KBD300A keyboard. Operation instructions are provided below , but you should become familiar with the detailed instructions provided in the appropriate keyboard manual.
40 C1555M-F (10/05) Appendix SYSTEM ARCHITECTURE The System 9770 is similar to Pelco’ s System 9760 but uses different matrix bay hardware and provides more features.
C1555M-F (10/05) 41 INSTALLING ADDITIONAL MATRIX BAYS—SIDEFRAMING AND DOWNFRAMING When either more cameras and/or more monitors are needed than can be accommodated by one matrix bay (256 x 32), you .
42 C1555M-F (10/05) Downframing T o expand the matrix video outputs beyond 32, you can downframe the video from the first CM9770-MXB to subsequent CM9770-MXB units for an additional 32 monitor outputs on each matrix bay .
C1555M-F (10/05) 43 Refer to the Downframing section on the following page for instructions on setting the termination jumpers in the downframed bays. Figure 31.
44 C1555M-F (10/05) A downframe cable is used to connect the bottom connector of the RPC card to a downframe card. Figure 33. DFC Cable Downframe Cards The following downframe cards are available for the System 9770: • CM9770-DFC—This is the “no looping” downframe card.
C1555M-F (10/05) 45 Figure 34. DFC Card Figure 35. CM9770-DFL Card INPUT FROM BAY ABOVE (LOWER-NUMBERED SLOT) INPUT FROM BAY ABOVE (HIGHER-NUMBERED SLOT) OUTPUT TO BAY BELOW (HIGHER-NUMBERED SLOT) OUT.
46 C1555M-F (10/05) HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1 If you have ordered a replacement or additional CM9700-SER serial communication card, complete the following steps to configure the jumpers on the CC1 board for the slot position the new SER card will occupy .
C1555M-F (10/05) 47 Figure 37. SER Card Jumper Assignments 4. Insert the new SER card into an available ISA slot. The default CM9700-CC1 configuration provides SER cards in ISA slots 1 and 2, so you will most likely insert the new card into slot 3 or 4.
48 C1555M-F (10/05) V IDEO INPUT CARD (CM9770-VCC) DETAIL Figure 39. CM9770-VCC Card T able H. Video Input Card (CM9770-VCC) LEDs Front Panel Label Color When LED Is On + Green The +5 VDC power source is functioning properly . - Green The -5 VDC power source is functioning properly.
C1555M-F (10/05) 49 MONITOR OUTPUT CARD (CM9770-VMC) DETAIL Figure 40. CM9770-VMC Card T able I. Monitor Output Card (CM9770-VMC) LEDs Front Panel Label Color When LED is on or blinking + Green The +5 VDC power source is functioning properly . - Green The -5 VDC power source is functioning properly.
50 C1555M-F (10/05) The monitor output card DIP switch selects various options. These switches are set in the proper position at the factory , but they can be changed, if necessary .
C1555M-F (10/05) 51 NETWORKING Networking of systems is required when the following conditions apply: • T wo or more individual systems need to share video and control features.
52 C1555M-F (10/05) CONNECTING SATELLITE DEVICES Y ou can connect a CM6800E-48X8 matrix switcher or a CM9760-SA T device to the System 9770. Refer to the CM9760-SA T Installation/Operation manual or to the CM6800E-48X8 Installation/Operation manual for instructions.
C1555M-F (10/05) 53 HOW TO INSTALL V IDEO PATCH PANELS (CM9700-VPP) There are two ways you can mount a CM9700-VPP video patch panel into a rack. 1. Single panels onto a rack 2. Up to 16 panels using the CM9700-VPP-RK The following illustration shows how to mount a single panel onto a rack.
54 C1555M-F (10/05) MOUNTING THE CM9770-MXB IN AN OPEN RACK Figure 46. Mounting the CM9770-MXB in an Open Rack.
C1555M-F (10/05) 55 DOS ENVIRONMENT AND COMMAND REFERENCE DOS stands for Disk Operating System. Every time you turn on the CM9700-CC1 or every time you reboot (Alt +Ctrl +Del), the computer loads DOS from the CC1 disk into the memory (RAM). Once loaded DOS lets you run other programs, in particular , the CM9700.
56 C1555M-F (10/05) File Names and DOS File names in DOS are limited to eight characters. If you issue a command to change the name of the configuration files in the 9700 directory to a name exceeding eight characters, the name is truncated to eight characters.
C1555M-F (10/05) 57 If you entered the same command again (CD..) at the c:9700> prompt and pressed the ENTER key , you would finally end up again at the root directory as previously done.
58 C1555M-F (10/05) DOS REFERENCE The following table provides a list of the most common DOS commands that you are most likely to use when operating the CC1. In addition, you can use the command HELP to access the MS-DOS command reference on the CC1. T able K.
C1555M-F (10/05) 59 COMMAND EXAMPLE(S) SWITCHES COMMENTS FASTHELP C:> F ASTHELP Lists and briefly describes every command provided with MS-DOS. This list is much less detailed than the list you get using the “HELP” command. C:>FASTHELP DIR Specifies the name of the command that you wish F ASTHELP to give information about.
60 C1555M-F (10/05) T roubleshooting Problems with the CC1 Problems with the CC1 as part of a 9770 system may occur in the following areas: • The CC1 itself • Setup files (also known as configur.
C1555M-F (10/05) 61 Monitor Display Problems Problem: T ext characters (such as in camera titles) do not display properly . Solution: The CM9770-VMC monitor output card in the matrix bay may not be set for the correct video format (NTSC or P AL).
62 C1555M-F (10/05) Specifications CM9700-CC1 ELECTRICAL Input V oltage 120 V AC, 60 Hz or 230 VAC, 50 Hz, autoranging Power Consumption 57 watts Processor Pentium ® class CPU Clock Speed 733 MHz Memory 64 MB RAM Disk Drive 3.
C1555M-F (10/05) 63 CM9770-MXB ELECTRICAL Input V oltage 100-240 V AC, 50/60 Hz, autoranging Power Consumption 60 watts maximum (fully populated) Communication Full duplex RS-422 using an RJ-45 connector VIDEO Inputs Card slots support up to 256 inputs per bay Outputs T wo output card slots for supporting 32 outputs per bay Video Input Level 0.
64 C1555M-F (10/05) Regulatory Notices CM9780-MXB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Een belangrijk punt na aankoop van elk apparaat Pelco C1555M-F (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco C1555M-F heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco C1555M-F vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco C1555M-F leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco C1555M-F krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco C1555M-F bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco C1555M-F kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco C1555M-F . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
