Gebruiksaanwijzing /service van het product C2927M-A (1/06) van de fabrikant Pelco
Ga naar pagina of 24
400 Series Flat Panel LCD Monitors INSTALLATION/OPERATION C2927M-A (1/06).
.
C2927M-A (1/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices .
4 C2927M-A (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C2927M-A (1/06) 5 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
6 C2927M-A (1/06) Description The 400 Series high performance LCD monitors are designed specifically for the security industry and provide high quality display of video or computer signals via multiple inputs.
C2927M-A (1/06) 7 PACKAGE CONTENTS 1 15-, 17-, or 19-inch TFT LCD monitor 1 VGA cable with 15-pin, D-sub connector 1 US standard power cable 1 EU standard power cable 1 DVI cable 1 USB cable (T ype A to B) 1 Remote control unit 2 AA batteries 1 Installation/Operation manual Figure 1.
8 C2927M-A (1/06) Installation The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted. NOTE: Only use a recommended rack mount or wall mount kit, such as the PMCL-RM15, PMCL-RM17, PMCL-RM19, or PMCL-WM.
C2927M-A (1/06) 9 1. AC IN: This can be connected to a 100-240 V AC, 50/60 Hz source. 2. DC OUT : This connection can output 12 VDC, 0.5 A (continuous), 50/60 Hz. 3. DC IN: This can be connected to an external 12 VDC, 5 A source. 4. VGA IN: This can be connected to the VGA cable (supplied).
10 C2927M-A (1/06) V IDEO AND POWER CONNECTIONS Refer to Figure 2 for video, audio, power , and other connections. 1. Connect the video cable. (Refer to T able A for video coaxial requirements.) a. Connect video cables as follows, depending on the input source.
C2927M-A (1/06) 11 Figure 3. Looping Operation: One Monitor with External Video Equipment Figure 4. Looping Operation: Maximum of Three Monitors with External Video Equipment NOTE: Looping more than three 400 Series monitors is not recommended. IN OUT IN OUT PM C L400 VIDEO 1 VIDEO 2 AUDIO OUT R L IN OUT S -VIDEO 2.
12 C2927M-A (1/06) Operation INSTALLING REMOTE CONTROL BATTERIES Figure 5. Battery Installation Refer to Figure 5 for the following procedure. 1. Open and remove the battery cover on the back of the remote control. 2. Install two AA size batteries (supplied).
C2927M-A (1/06) 13 FRONT PANEL CONTROLS Figure 6. Front Panel Controls 1. This button selects the input signal and swaps the main and PIP displays when PIP is active. 2. This button decreases the value of a selected menu item and accesses the brightness control when no PIP or menu is active.
14 C2927M-A (1/06) REMOTE CONTROL FUNCTIONS Figure 7. Remote Control Functions 1. This button turns on or off power to the monitor . 2. This button selects the previous channel. 3. This button selects the next channel. 4. This button increases the audio volume.
C2927M-A (1/06) 15 OSD CONTROL MENUS Unless otherwise noted, the menus are the same for the PMCL415, PMCL417, and PMCL419. Also, since different options are available for different input types, some menus have a video mode and a VGA mode. Some options may be unavailable and are grayed out.
16 C2927M-A (1/06) VIDEO MENU (VGA MODE) Figure 9. Video Menu (VGA Mode) If PIP is active in VGA mode, these controls affect PIP and not the Main Display . Video Menu (VGA Mode) Field Definitions Contrast: Adjusts white level of the video screen image.
C2927M-A (1/06) 17 SCREEN MENU (VGA MODE) Figure 12. Screen Menu (VGA Mode) Screen Menu (VGA Mode) Field Definitions Clock: Adjusts the horizontal size of the screen image. H Position: Moves the screen image left or right. V Position: Moves the screen image up or down.
18 C2927M-A (1/06) SOURCE MENU (VGA MODE) Figure 14. Source Menu (VGA Mode) Source Menu (VGA Mode) Field Definitions Main Display Source: Select one: VGA, DVI, VIDEO-1, VIDEO-2, SVIDEO. PIP Display source: Select one: VIDEO-1, VIDEO-2, SVIDEO, OFF . (Some choices will be grayed out depending on your Main Display Source selection.
C2927M-A (1/06) 19 MENU DEFAULT V ALUES Refer to the following default values if you need to manually return the monitor to the factory settings. Video Menu Contrast 50 Brightness 50 Color 50 T int 0 .
20 C2927M-A (1/06) Supported Input Modes Mode Resolution H Freq (kHz) V Freq (Hz) 0 720 x 350 31.469 70.087 1 640 x 480 31.469 59.940 2 640 x 480 35.000 66.667 3 640 x 480 37.861 72.809 4 640 x 480 37.500 75.000 5 720 x 400 31.469 70.087 6 800 x 600 35.
C2927M-A (1/06) 21 Specifications MODELS PMCL415 15-inch (381 mm) active TFT LCD monitor PMCL417 17-inch (432 mm) active TFT LCD monitor PMCL419 19-inch (483 mm) active TFT LCD monitor GENERAL LCD Pa.
22 C2927M-A (1/06) PHYSICAL Dimensions PMCL415 13.7" W x 11.7" H x 3.0" D (34.70 x 29.8 x 7.5 cm) PMCL417 15.0" W x 13.4" H x 3.2" D (38.1 x 34.1 x 8.0 cm) PMCL419 16.6" W x 14.7" H x 3.3" D (42.1 x 37.4 x 8.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
Een belangrijk punt na aankoop van elk apparaat Pelco C2927M-A (1/06) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco C2927M-A (1/06) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco C2927M-A (1/06) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco C2927M-A (1/06) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco C2927M-A (1/06) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco C2927M-A (1/06) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco C2927M-A (1/06) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco C2927M-A (1/06) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
