Gebruiksaanwijzing /service van het product C689M (5/01) van de fabrikant Pelco
Ga naar pagina of 16
DX3016RX Remote V iewing Software Installation/ Operation Manual C689M (5/01) ® Pelco • 3500 Pelco W ay • Clovis, CA 93612-5699 USA • www .pelco.
2 Pelco Manual C689M (5/01) CONTENTS Section Page DESCRIPTION ................................................................................................................... 3 INST ALLA TION ........................................................
Pelco Manual C689M (5/01) 3 DESCRIPTION The DX3016RX Remote Viewing Software is designed for use with Microsoft Windows ® 98, Windows 2000, and Windows Me. In combination with the DX3016 Series Digital Video Re- corder (DVR) and an Ethernet LAN (local area network), the software can acquire live and recorded images from the DVR.
4 Pelco Manual C689M (5/01) NOTE: IP addresses and subnet masks must be set correctly . Do not make or alter these settings if you do not have sufficient expertise on networks. The IP addres- ses 192.168.1.xxx (1-254) fall within the range of private IP addresses prescribed for RFC1918.
Pelco Manual C689M (5/01) 5 00799 2. In the IP Address page, select Specify an IP Address and enter the IP address and subnet mask. Click OK to complete the settings and exit the menu. Figure 2. IP Address Page 3. Restart your computer . 4. T urn on the DVR(s) and set the IP address and subnet mask for each recorder .
6 Pelco Manual C689M (5/01) OPERA TION RESTRICTIONS The playback speed of the DX3016RX is determined by the computer ’ s processing speed, type of playback devices used, network traffic, and other factors. For these reasons, there will be cases where the software’s playback speed does not match the recording intervals of the DVR.
Pelco Manual C689M (5/01) 7 CONNECT TO A DVR To connect to a DVR: 1. If the Network window is not open, click Network on the toolbar , and then click Re- corder List. The Network window appears. Figure 4. Network Window When you start the software, the Network window appears automatically if there are any recorders in the list.
8 Pelco Manual C689M (5/01) 00802 00785 ADD A RECORDER To add a recorder to the Recorder List: 1. Click Network on the toolbar , and then click Add Recorder. The Recorder Property window appears. Figure 6. Recorder Property Window 2. Enter the DVR name and IP address in the Recorder Property window .
Pelco Manual C689M (5/01) 9 If the camera number is shown in red, it means the DVR is recording that camera. In the multiple-screen display , the camera number changes from green to yellow to indicate the most recently updated field.
10 Pelco Manual C689M (5/01) PLA YBACK Begins playback in the forward direction. FORW ARD SEARCH Starts search playback in the normal direction. Speed can be adjusted through repeated clicks of the button (1X, 2X, 4X, 8X, 1X). PLA Y SPEED SLIDER Drag the slider to adjust playback speed.
Pelco Manual C689M (5/01) 11 ALARM SEARCH 1. Click Search on the T ool bar to open the Search menu. 2. Click Previous Alarm, Next Alarm, or Alarm List. If you click Alarm List, a list of alarms appears. Scroll through the list and click the alarm you want to view .
12 Pelco Manual C689M (5/01) COPY A VIDEO IMAGE This option works in both the live and playback modes. Click the Copy command in the Edit menu to copy the currently displayed image to the clip- board. PRINT A VIDEO IMAGE This option works in both the live and playback modes.
Pelco Manual C689M (5/01) 13 SEQUENCE CAMERAS This option works in both the live and playback modes. To sequence all cameras: 1. Click Camera in the View menu. 2. Click All in the drop-down menu. Figure 13. Camera Selection List To sequence some cameras: 1.
14 Pelco Manual C689M (5/01) 00800 00810 ZOOM This option works in both the live and playback modes. There are two ways to zoom. QUICK ZOOM 1. Click Quick Zoom in the View menu. A Quick Zoom window opens. Figure 15. Quick Zoom Window 2. Hold down the left mouse button and drag it to create a box around the area on which you want to zoom.
Pelco Manual C689M (5/01) 15 TROUBLESHOOTING Refer to the following procedures if problems occur during network connection. 1. Confirm that the cable is physically connected. If a switching hub is used, check that the connection has not been made to the hub’s cascade port.
16 Pelco Manual C689M (5/01) ® Pelco, the Pelco logo, Spectra, Genex, Legacy , and PelcoVision are registered trademarks of Pelco. © Copyright 2001, Pelco ™ Esprit and Camclosure are trademarks of Pelco. All rights reserved. ® Windows is a registered trademark of Microsoft Corporation.
Een belangrijk punt na aankoop van elk apparaat Pelco C689M (5/01) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco C689M (5/01) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco C689M (5/01) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco C689M (5/01) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco C689M (5/01) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco C689M (5/01) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco C689M (5/01) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco C689M (5/01) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
