Gebruiksaanwijzing /service van het product CC3710UH van de fabrikant Pelco
Ga naar pagina of 24
Installa tion/Oper a tion CC3610UH and CC3710UH Series Color Camer a C2933M (10/05) Pelco Worldwide Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
[ 2 ] Pelco Manual C2933M (10/05) ® Pelco, the Pelco logo, Spectra, Genex, Legacy , Esprit and Camclosure are registered trademarks of Pelco. ™Endura and ExSite are trademarks of Pelco ™DLP is a trademark of T exas Instruments, Inc. ™SuperHAD CCD is a trademark of the Sony Corporation.
Pelco Manual C2933M (10/05) [ 3 ] CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ........................................................................................................... 4 REGULA TORY NOTICES ...............................................
[ 4 ] Pelco Manual C2933M (10/05) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are impor- tant operating and maintenance instructions in the literature accompanying this unit.
Pelco Manual C2933M (10/05) [ 5 ] REGULA T OR Y NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[ 6 ] Pelco Manual C2933M (10/05) DESCRIPTION CC3610UH and CC3710UH Series cameras are color video cameras with a 1/3-inch CCD imager . All cameras have a direct drive/auto iris lens connector and adjustable back focus, and they accept C and CS lenses.
Pelco Manual C2933M (10/05) [ 7 ] CAMERA LA Y OUT Figure 1. Camera Layout INST ALLA TION Lens Mounting CC3610UH and CC3710UH Series cameras can use fixed iris, manual iris, auto iris, or direct drive lenses. Cameras are factory-set for CS-mount lenses, but are easily adjusted for C-mount lenses.
[ 8 ] Pelco Manual C2933M (10/05) Camera Mounting Mounting points are provided on the top and bottom of the camera and are used to mount the camera on a bracket or tripod. They are designed to accept standard photographic mounting bolts (1/4-inch UNC-20).
Pelco Manual C2933M (10/05) [ 9 ] CONNECTIONS CC3610UH and CC3710UH Series cameras offer standard power and coax video connectors as well as an RJ45-10 connector that combines low voltage power and video (composite or UTP).
[ 10 ] Pelco Manual C2933M (10/05) Low V olt age Power Supply Cameras fitted with an automatic-switching low voltage power supply operate at 10.8 to 13.8 VDC (12 VDC -10% +15%) or 20.4 to 27.6 V AC (24 V AC ±15%) at 50/60Hz. Connections and polarity are indicated adjacent to the screw terminals on the rear panel.
Pelco Manual C2933M (10/05) [ 11 ] RJ45-10 Connections The RJ45-10 connector allows video (composite and twisted pair) and power connections to be made to the camera using a single Cat5-style cable. NO TE: The PCM150 camera mount is designed for the CC3610UH and CC3710UH Series camera.
[ 12 ] Pelco Manual C2933M (10/05) Ser vice Connection The service connector allows a video monitor to be connected locally to the camera using a 2.5 mm plug to composite video BNC cable.
Pelco Manual C2933M (10/05) [ 13 ] CAMERA SETUP Lens Setup and Focus Procedures Video Drive or Direct Drive (DC) Auto Iris Lens 1. Set the ESC switch and AGC switch to OFF . 2. Adjust the lens for the optimum picture. Video Drive Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1 V peak-to-peak).
[ 14 ] Pelco Manual C2933M (10/05) Back F ocus Adjustment The back focus adjustment is located at the front of the camera and is accessible from either side of the case. T o adjust the back focus: 1. Loosen the two back focus locking screws (one on each side).
Pelco Manual C2933M (10/05) [ 15 ] Switch Settings NO TE: Under most conditions, no setting of switches will be required. Please read the details of each switch before making any adjustments. AGC (Automatic Gain Control) - Switch Setting 1 Automatically adjusts the image to compensate for low levels of illumination.
[ 16 ] Pelco Manual C2933M (10/05) Flickerless - Switch Setting 4 The flickerless setting can reduce the flicker caused by certain lighting conditions. The Electronic Shutter Control must be off for the correct operation of the flickerless function and is therefore automatically disabled.
Pelco Manual C2933M (10/05) [ 17 ] Camera Synchronization When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate this vertical roll, it is necessary for the cameras to be synchronized.
[ 18 ] Pelco Manual C2933M (10/05) SPECIFICA TIONS GENERAL Imaging Device: 1/3-inch interline transfer CCD Picture Elements CC3610UH and CC3710UH: NTSC 768 (H) x 494 (V); P AL 752 (H) x 582 (V) Sensin.
Pelco Manual C2933M (10/05) [ 19 ] ENVIRONMENT AL Operating T emperature: 14° to 122°F (-10° to 50°C) Storage T emperature: 14° to 158°F (-10° to 70°C) Operating Humidity: 20% to 80%, non-condensing Storage Humidity: 20% to 90%, non-condensing PHY SICAL Dimensions: 5" L x 2.
[ 20 ] Pelco Manual C2933M (10/05).
Pelco Manual C2933M (10/05) [ 21 ].
[ 22 ] Pelco Manual C2933M (10/05) If the goods are to be sent by a FREIGHT FORWARDER, send the goods to: Pelco c/o Expeditors 473 Eccles Avenue South San Francisco, CA 94080 USA Phone: 650-737-1700 F.
Pelco Manual C2933M (10/05) [ 23 ] REVISION HIST ORY Manual # Date Comments C2933M 10/05 Original version..
[ 24 ] Pelco Manual C2933M (10/05) Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com www.pelco.com www.pelco.com www.
Een belangrijk punt na aankoop van elk apparaat Pelco CC3710UH (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco CC3710UH heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco CC3710UH vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco CC3710UH leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco CC3710UH krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco CC3710UH bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco CC3710UH kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco CC3710UH . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
