Gebruiksaanwijzing /service van het product Z97-WS van de fabrikant Asus
Ga naar pagina of 186
Motherboard Z97-WS.
ii E9146 First Edition April 2014 Copyright© 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitte.
iii Contents Safety information ...................................................................................................... vi About this guide ................................................................................................
iv Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................ 3-1 3.2 BIOS setup program .................................................................................. 3-2 3.
v 4.4.2 USB 3.0 Boost............................................................................. 4-8 4.4.3 EZ Update ................................................................................... 4-9 4.4.4 USB BIOS Flashback ...................
vi Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: 1. Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
viii Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
ix Z97-WS specifications summary CPU LGA1150 socket for the 4th Generation and New 4th Generation Intel ® Core™ i7/Intel ® Core™ i5/ Intel ® Core™ i3, Pentium ® and Celeron ® processors Supports Intel ® Turbo Boost Technology 2.0* * The Intel ® Turbo Boost Technology 2.
x (continued on the next page) Z97-WS specifications summary Storage - 4 x SATA 6 Gb/s ports (gray) - Supports Intel ® Smart Response Technology, Intel ® Rapid Start Technology, Intel ® Smart Conne.
xi ASUS Exclusive Features High Performance 5-Way Optimization by Dual Intelligent Processors 5 - Whole system optimization with a single click! 5-Way Optimization tuning key perfectly consolidates TP.
xii ASUS Exclusive Features Gaming Scenario Turbo APP - Featuring tuning system performance customization, network priority, and automatic audio scene congurations for selected applications Turbo LAN - Experience smooth online gaming with lower pings and less lags Q Stereo - Feel the sound power with different usage scenarios.
xiii ASUS Quiet Thermal Solution Quiet Thermal Design - ASUS Fan Xpert 3 - ASUS Fanless Design: Heat-pipe solution ASUS Exclusive Overclocking Features Precision T weaker 2 - vCore: Adjustable CPU Core voltage at 0.001 V increment - iGPU: Adjustable CPU Graphics voltage at 0.
xiv Internal I/O connectors 4 x SATA 6Gb/s Connectors (4 x gray) 1 x 4-pin CPU Fan connector for both 3-pin (DC mode) and 4-pin (PWM mode) CPU coolers control* 1 x 4-pin CPU Optional Fan connector (CP.
xv Package contents Check your motherboard package for the following items User Manual ASUS Z97-WS motherboard User manual Support DVD 8 x Serial ATA 6 Gb/s cables COM port bracket 1 x ASUS SLI™ bri.
xvi Installation tools and components The tools and components in the table above are not included in the motherboard package. PC chassis Power supply unit Intel ® LGA1150 compatible CPU Fan Intel ®.
Z97-WS 1-1 Chapter 1 Product introduction 1 1.1 Special features 1.1.1 Product highlights LGA1150 socket for New 4th generation Intel ® Core™ i7/Intel ® Core™ i5/Intel ® Core™ i3, Pentium ® .
1-2 Chapter 1: Product introduction Chapter 1 Dual-Channel DDR3 3400 (O.C) / 1600 / 1333 MHz Support The motherboard supports the dual-channel DDR3 memory that features data transfer rates of DDR3 3400 (O.
Z97-WS 1-3 Chapter 1 Beat Thermal Chokes ASUS Beat Thermal Chokes deliver great durability, minimal power loss, and up to 93% power efciency under normal operation.
1-4 Chapter 1: Product introduction Chapter 1 • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
Z97-WS 1-5 Chapter 1 Refer to 1.2.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
1-6 Chapter 1: Product introduction Chapter 1 Layout contents Connectors/Jumpers/Buttons and switches/Slots Page 1. ATX power connectors (24-pin EATXPWR, 2 x 8-pin EATX12V) 2. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT, 4-pin CHA_FAN1-4 ) 3.
Z97-WS 1-7 Chapter 1 1.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1150 socket designed for the 4th Generation and the New 4th Generation Intel ® Core™ i7 / Intel ® Core™ i5 / Intel ® Core™ i3, Pentium ® , and Celeron ® processors.
1-8 Chapter 1: Product introduction Chapter 1 Recommended memory configurations 1.2.4 System memory The motherboard comes with eight DDR 3 (Double Data Rate 3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module.
Z97-WS 1-9 Chapter 1 • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1-10 Chapter 1: Product introduction Chapter 1 1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 3.
Z97-WS 1-11 Chapter 1 • We recommend that you provide sufcient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1-4 when using multiple graphics cards for better thermal environment.
1-12 Chapter 1: Product introduction Chapter 1 A B C D E F G H PCIe x16_1 shared – – – – – – – PCIe x16_2 – shared – – – – – – PCIe x16_3 shared – – – – – – –.
Z97-WS 1-13 Chapter 1 1.2.6 Onboard buttons and switches Onboard buttons and switches allow you to ne-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
1-14 Chapter 1: Product introduction Chapter 1 3. MemOK! button Installing DIMMs that are not compatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! button lights continuously.
Z97-WS 1-15 Chapter 1 4. TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance.
1-16 Chapter 1: Product introduction Chapter 1 5. EPU switch Enable this switch to automatically detect the current PC loadings and intelligently moderate the power consumption. Enable this switch when the system is powered off. • The EPU LED (OLED2) near the EPU switch lights up when the EPU switch is enabled.
Z97-WS 1-17 Chapter 1 7. EZ XMP switch Enable this switch to overclock the installed DIMMs, allowing you to enhance the DIMM’s speed and performance. Z97-WS Z97-WS EZ_XMP switch Disable (Default) Enable EZ_XMP 8. ASUS Dr. POWER switch This switch allows you to enable or disable the ASUS Dr.
1-18 Chapter 1: Product introduction Chapter 1 1.2.7 Jumpers 1. CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a exible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3.
Z97-WS 1-19 Chapter 1 2. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch is enabled. Z97-WS Z97-WS TPU LEDs TPU_LED 3. EPU LED (OLED2) The EPU LED lights up when the EPU switch is enabled. Z97-WS Z97-WS EPU LED OLED2 4. Power LED (+12V_PWR LED) This LED lights up when you turn on the system using the Power-on button.
1-20 Chapter 1: Product introduction Chapter 1 5. ASUS Dr. Power LED (DR_POWER LED) The ASUS Dr. Power LED near the ASUS Dr. Power switch lights up when the ASUS Dr. Power switch is on Enable. 6. PWR_SUPPLY LED The ASUS Dr. Power LED near the EATX PWR connector lights up when the ASUS Dr.
Z97-WS 1-21 Chapter 1 7. EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch. Z97-WS Z97-WS XLED1 XLED1 8. Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details.
1-22 Chapter 1: Product introduction Chapter 1 Q-Code table Code Description 00 Not used 01 Power on. Reset type detection (soft/hard). 02 AP initialization before microcode loading 03 System Agent in.
Z97-WS 1-23 Chapter 1 Code Description E9 S3 Resume PPI not Found EA S3 Resume Boot Script Error EB S3 OS Wake Error EC – EF Reserved for future AMI error codes F0 Recovery condition triggered by .
1-24 Chapter 1: Product introduction Chapter 1 Code Description 9C USB Detect 9D USB Enable 9E – 9F Reserved for future AMI codes A0 IDE initialization is started A1 IDE Reset A2 IDE Detect A3 IDE E.
Z97-WS 1-25 Chapter 1 ACPI/ASL Checkpoints (under OS) Code Description 03 System is entering S3 sleep state 04 System is entering S4 sleep state 05 System is entering S5 sleep state 30 System is waking up from the S3 sleep state 40 System is waking up from the S4 sleep state AC System has transitioned into ACPI mode.
1-26 Chapter 1: Product introduction Chapter 1 1.2.9 Internal connectors 1. Intel ® Z97 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1/6, SATAEXPRESS_1) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables.
Z97-WS 1-27 Chapter 1 2. ASMedia ® Serial ATA 6 Gb/s connectors (7-pin SATA6G_E1, SATA6G_E2, SATAEXPRESS_E1) These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. • ASMedia storage controller can only support AHCI mode.
1-28 Chapter 1: Product introduction Chapter 1 4. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
Z97-WS 1-29 Chapter 1 6. Chassis Fan control setting (3-pin CHAFAN_SEL) These jumpers allow you to switch fan pin selection. The CHAFAN_SEL jumper is for the front fans and rear fans control. Set pins 1-2 when using 3-pin fans or pins 2-3 when using 4-pin fans.
1-30 Chapter 1: Product introduction Chapter 1 8. USB 3.0 connectors (20-1 pin USB3_E12, USB3_E34) These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benets of USB 3.
Z97-WS 1-31 Chapter 1 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
1-32 Chapter 1: Product introduction Chapter 1 10. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN, 4-pin CPU_OPT , 4-pin CHA_FAN1-4) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector.
Z97-WS 1-33 Chapter 1 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W. • DO NOT forget to connect the 4-pin/8-pin EATX12 V power plug.
1-34 Chapter 1: Product introduction Chapter 1 • SystempowerLED(2-pinPLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
Z97-WS 1-35 Chapter 1 13. DirectKey connector (2-pin DRCT) This connector is for the chassis-mounted button that supports the DirectKey function. Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature.
1-36 Chapter 1: Product introduction Chapter 1 15. M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. • This socket supports M Key and type 2260/2280 storage devices. • The M.2 Socket 3 shares bandwidth with SATAEXPRESS_1. Refer to section 3.
Z97-WS 1-37 Chapter 1 17. Serial port connector (10-1 pin COM) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The COM module is pur chased separately .
1-38 Chapter 1: Product introduction Chapter 1.
Z97-WS 2-1 Chapter 2 Basic installation 2 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models.
2-2 Chapter 2: Basic installation Chapter 2 3. Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
Z97-WS 2-3 Chapter 2 2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1150 socket only. DO NOT install a CPU designed for LGA1155 and LGA1156 sockets on the LGA1150 socket.
2-4 Chapter 2: Basic installation Chapter 2 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary.
Z97-WS 2-5 Chapter 2 To uninstall the CPU heatsink and fan assembly.
2-6 Chapter 2: Basic installation Chapter 2 To remove a DIMM 2.1.4 DIMM installation.
Z97-WS 2-7 Chapter 2 2.1.5 ATX Power connection OR.
2-8 Chapter 2: Basic installation Chapter 2 2.1.6 SATA device connection OR OR.
Z97-WS 2-9 Chapter 2 2.1.7 Front I/O Connector To install ASUS Q-Connector USB 2.0 AAFP To install USB 2.0 connector To install front panel audio connector USB 3.
2-10 Chapter 2: Basic installation Chapter 2 2.1.8 Expansion Card installation To install PCIe x16 cards To install PCIe x1 cards.
Z97-WS 2-11 Chapter 2 2.2 BIOS update utility USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system.
2-12 Chapter 2: Basic installation Chapter 2 6. Wait until the light goes out, indicating that the BIOS updating process is completed. For more BIOS update utilities in BIOS setup, refer to the section 3.
Z97-WS 2-13 Chapter 2 2.3 Motherboard rear and audio connections 2.3.1 Rear I/O connection * and **: Refer to the tables on the next page for LAN port LEDs and audio port definitions. Rear panel connectors 1. Optical S/PDIF Out port 8. DisplayPort 2. HDMI port 9.
2-14 Chapter 2: Basic installation Chapter 2 • OnlyUSB3.0ports5and6supportAiCharger+function. • OnlyUSB2.0port6supportsUSBCharger+function • ThepluggedUSB3.0devicemayrunonxHCImodeorEHCImode,dependingonthe operating system’s setting.
Z97-WS 2-15 Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers 2.3.2 Audio I/O connections Audio I/O ports ** Audio 2, 4, 6, or 8-channel configuration Port Headset 2-channel 4-channel .
2-16 Chapter 2: Basic installation Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 2.1 channel Speakers If you are using Windows 8.1 platform, use only the gray audio port for Side Speaker Out in a6-channelconguration.
Z97-WS 2-17 Chapter 2 Connect to 7.1 channel Speakers When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the gray port. 2.4 Starting up for the first time 1. After making all the connections, replace the system case cover.
2-18 Chapter 2: Basic installation Chapter 2 BIOS Beep Description One short beep VGA detected Quick boot set to disabled No keyboard detected One continuous beep followed by two short beeps then a pa.
Z97-WS 3-1 Chapter 3 The new ASUS UEFI BIOS is a Unied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more exible and convenient mouse input.
3-2 Chapter 3: BIOS setup Chapter 3 • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
Z97-WS 3-3 Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority.
3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
Z97-WS 3-5 Chapter 3 Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently-used system settings and conguration.
3-6 Chapter 3: BIOS setup Chapter 3 Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste.
Z97-WS 3-7 Chapter 3 3.2.3 QFan Control The QFan Control allows you to set a fan prole or manually congure the operating speed of your CPU and chassis fans.
3-8 Chapter 3: BIOS setup Chapter 3 Configuring fans manually Select Manual from the list of proles to manually congure your fans’ operating speed. To congure your fans: 1. Select the fan that you want to congure and to view its current status.
Z97-WS 3-9 Chapter 3 3.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also easily set RAID in your system using this feature. Tuning your system settings To tune your settings: 1.
3-10 Chapter 3: BIOS setup Chapter 3 Creating RAID To create RAID: 1. Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. 2. Click RAID then click Next . • Ensure that your HDDs have no existing RAID volumes.
Z97-WS 3-11 Chapter 3 3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items..
3-12 Chapter 3: BIOS setup Chapter 3 Adding items to My Favorites To add BIOS items: 1. Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.
Z97-WS 3-13 Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-14 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
Z97-WS 3-15 Chapter 3 To change a user password: 1. Select the User Password item and press <Enter>. 2. From the Enter Current Password box, key in the current password, then press <Enter>. 3. From the Create New Password box, key in a new password, then press <Enter>.
3-16 Chapter 3: BIOS setup Chapter 3 Ai Overclock Tuner [Auto] This item allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking conguration options: [Auto] Automatically optimizes the CPU ratio and BCLK frequency.
Z97-WS 3-17 Chapter 3 ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings.
3-18 Chapter 3: BIOS setup Chapter 3 Internal PLL Overvoltage [Auto] This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme overclocking capability. Conguration options: [Auto] [Enabled] [Disabled] BCLK Frequency: DRAM Frequency Ratio [Auto] Allows you to set the BCLK Frequency to DRAM Frequency ratio mode.
Z97-WS 3-19 Chapter 3 Primary Timings DRAM CAS# Latency [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# to CAS# Delay [Auto] Conguration options: [Auto] [1] – [31] DRAM RAS# PRE Time.
3-20 Chapter 3: BIOS setup Chapter 3 DRAM RTL (CHA_R0D1) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D0) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHA_R1D1) [Auto.
Z97-WS 3-21 Chapter 3 tWRRD_dd [Auto] Conguration options: [Auto] [1] - [15] tWRWR [Auto] Conguration options: [Auto] [1] - [7] tWRWR_dr [Auto] Conguration options: [Auto] [1] - [15] tWRWR_dd.
3-22 Chapter 3: BIOS setup Chapter 3 Skew Control Changing subitems in this menu may enhance the DRAM overclocking capability and stability. Transmitter Rising Slope [Auto] Conguration options: [Au.
Z97-WS 3-23 Chapter 3 VRM Spread Spectrum [Disabled] This item allows to enhance the system stability. Conguration options: [Disabled] [Enabled] Active Frequency Mode [Disabled] This item allows to enhance the power saving condition of your system.
3-24 Chapter 3: BIOS setup Chapter 3 Fixed DRAM Switching Frequency (KHz) [300] This item allows you to set a higher frequency for an increased overclocking range or a lower frequency for an enhanced system stability. Use the <+> or <-> to adjust the value.
Z97-WS 3-25 Chapter 3 CPU Internal Power Fault Control Thermal Feedback [Auto] Allows your system to take precautionary actions to protect the CPU when the thermal condition of the external regulator exceeds the threshold.
3-26 Chapter 3: BIOS setup Chapter 3 Power Fast Ramp Response [Auto] This item allows you to enhance the response of the CPU voltage regulator during the load transients. Use the <+> or <-> to adjust the value. The values range from 0.00 to 1.
Z97-WS 3-27 Chapter 3 CPU Core Voltage Offset Use the <+> or <-> keys to adjust the value. The values range from 0.001 V to 0.999 V with a 0.001 V interval. The following item appears only when you set the CPU Core Voltage to [Adaptive Mode] .
3-28 Chapter 3: BIOS setup Chapter 3 Total Adaptive Mode CPU Cache Voltage [Auto] This item sums up the voltages of the CPU Cache Voltage offset and Additional Turbo Mode CPU Cache Voltage options. CPU System Agent Voltage Offset Mode Sign [+] [+] To offset the voltage by a positive value.
Z97-WS 3-29 Chapter 3 CPU Input Voltage [Auto] This item allows you to set an input voltage for the CPU by the external voltage regulator. By default, this item takes the standard value of the installed CPU. You can use the <+> or <-> keys to adjust the value.
3-30 Chapter 3: BIOS setup Chapter 3 DRAM DATA REF Voltage on CHA/CHB [Auto] This item allows you to set the DRAM reference voltage on the data lines on Channels A and B. You can use the <+> or <-> keys to adjust the value. The values range from 0.
Z97-WS 3-31 Chapter 3 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
3-32 Chapter 3: BIOS setup Chapter 3 3.6.1 CPU Configuration The items in this menu show the CPU-related information that the BIOS automatically detects.
Z97-WS 3-33 Chapter 3 Execute Disable Bit [Enabled] Execute Disable prevents certain classes of malicious buffer overow attacks when combined with a supporting OS (SuSE Linux 9.
3-34 Chapter 3: BIOS setup Chapter 3 CPU C-Status [Auto] This item allows you to set the power saving of the CPU states. Conguration options: [Auto] [Disabled] [Enabled] The following items appear only when you set the CPU C-Status to [Enabled] .
Z97-WS 3-35 Chapter 3 3.6.2 PCH Configuration PCI Express Configuration This item allows you to congure the PCI Express slots. PCIe Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.
3-36 Chapter 3: BIOS setup Chapter 3 Hybrid Hard Disk Support [Disabled] This item allows you to enable or disable the hybrid hard disk support for a faster resume time.
Z97-WS 3-37 Chapter 3 SATAExpress_1 SRIS Support [Auto] Conguration options: [Auto] [Disable] SATA Mode Selection [AHCI] This item allows you to set the SATA conguration. [Disabled] Disables the SATA function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices.
3-38 Chapter 3: BIOS setup Chapter 3 3.6.4 System Agent Configuration CPU Display Audio [Enabled] This item allows you to enable or disable the CPU display audio support. Conguration options: [Enabled] [Disabled] Graphics Configuration This item allows you to select a primary display from CPU and PCIe graphical devices.
Z97-WS 3-39 Chapter 3 NB PCIe Configuration This item allows you to congure the NB PCI Express settings. PCIEx16_1/4 Link Speed [Auto] This item allows you to congure the PCIEx16 speed for slots 1~4.
3-40 Chapter 3: BIOS setup Chapter 3 Intel xHCI Mode [Smart Auto] [Auto] The xHCI is automatically enabled and runs at USB 3.0 mode when the xHCI driver is installed in the operating system. [Smart Auto] Upon detection, the xHCI driver supports the USB 3.
Z97-WS 3-41 Chapter 3 PCIE Native Power Management [Disabled] This item allows you to enhance the power saving feature of PCI Express and perform ASPM operations in the operating system. Conguration options: [Disabled] [Enabled] The following item appears only when you set the PCI Express Native Power Management to [Enabled] .
3-42 Chapter 3: BIOS setup Chapter 3 3.6.7 Onboard Devices Configuration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] This item allows you to use the Azalia High Denition Audio Controller Conguration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller to [Enabled] .
Z97-WS 3-43 Chapter 3 PCI-EX4_1 Slot (black) Bandwidth [Enabled] [Auto] This item allows your system to run at X2 mode and disable the SATAEXPRESS_E1 when a PCI-E device is detected. SATAEXPRESS_ E1 is automatically enabled when no device is connected.
3-44 Chapter 3: BIOS setup Chapter 3 Intel LAN Controller (LAN1-LAN2) [Enabled] This item allows you to enable or disable the Intel LAN1/2 controllers. Conguration options: [Disabled] [Enabled] The following item appears only when you set the Intel LAN Controller to [Enabled] .
Z97-WS 3-45 Chapter 3 Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss.
3-46 Chapter 3: BIOS setup Chapter 3 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. Qfan Tuning Click this item to automatically detect the lowest speed and congure the minimum duty cycle for each fan.
Z97-WS 3-47 Chapter 3 CPU Q-Fan Control [Auto] [Auto] Detects the type of CPU fan installed and automatically switch the control modes. [PWM mode] Enables the CPU Q-Fan control in PWM mode for 4-pin CPU fan. [DC mode] Enables the CPU Q-Fan control in DC mode for 3-pin CPU fan.
3-48 Chapter 3: BIOS setup Chapter 3 CPU Fan Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature is under 40ºC, the CPU fan operates at the minimum duty cycle.
Z97-WS 3-49 Chapter 3 Chassis Fan 1/4 Lower Temperature [40] Use the <+> or <-> keys to adjust the chassis fans’ lower temperature. The values range from 40 ° C to 75 ° C.. Chassis Fan 1/4 Min. Duty Cycle(%) [60] Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle.
3-50 Chapter 3: BIOS setup Chapter 3 3.8 Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Enabled] [Disabled] This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed.
Z97-WS 3-51 Chapter 3 Network Stack Driver Support [Disabled] [Disabled] Select to skip the network stack driver from loading during POST. [Enabled] Select to load the network stack driver during POST. Next Boot after AC Power Loss [Normal Boot] [Normal Boot] Returns to normal boot on the next boot after an AC power loss.
3-52 Chapter 3: BIOS setup Chapter 3 Option ROM Messages [Enabled] [Enabled] The third-party ROM messages will be displayed during POST. [Disabled] Disables the ROM messages and displays only the ASUS logo during POST. Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs.
Z97-WS 3-53 Chapter 3 Boot from Storage Devices [Legacy OpROM first] This item allows you to select the type of storage devices that you want to launch.
3-54 Chapter 3: BIOS setup Chapter 3 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK).
Z97-WS 3-55 Chapter 3 dbx Management The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded. Delete the dbx Allows you to delete the DBX le from your system. Doing so may expose the system to security threats.
3-56 Chapter 3: BIOS setup Chapter 3 3.9 Tool menu The Tool menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. Setup Animator This item allows you to enable or disable the Setup animator.
Z97-WS 3-57 Chapter 3 Load from Profile This item allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the prole number that saved your BIOS settings, press <Enter>, and then select Yes .
3-58 Chapter 3: BIOS setup Chapter 3 3.9.3 ASUS DRAM SPD Information This item allows you to view the DRAM SPD information..
Z97-WS 3-59 Chapter 3 3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
3-60 Chapter 3: BIOS setup Chapter 3 3.11 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability, compatibility,and performance. However, BIOS updating is potentially risky. If there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Z97-WS 3-61 Chapter 3 3.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.
3-62 Chapter 3: BIOS setup Chapter 3 • This function can support devices such as a USB ash disk with FAT 32/16 format and single partition only. • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability.
Z97-WS 3-63 Chapter 3 3.11.4 ASUS BIOS Updater ASUS BIOS Updater allows you to update the BIOS in DOS environment. The screen captures used in this section are for reference only and may not be exactly the same as actually shown on your computer screen.
3-64 Chapter 3: BIOS setup Chapter 3 ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: Z97-DELUXE VER: 0210 (H :00 B :00) DATE: 02/12/2014 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: C: C: D: FORMAN~1 <DIR> Z97-DE~1.
Z97-WS 3-65 Chapter 3 5. Select Yes then press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater. 6. Restart your computer. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure. Ensure to load the BIOS default settings to ensure system compatibility and stability.
3-66 Chapter 3: BIOS setup Chapter 3.
Z97-WS 4-1 Chapter 4 Software support 4 4.1 Installing an operating system • Thismotherboardsupports32-bit/64-bitWindows ® 7,32-bit/64-bitWindows ® 8,and 32-bit/64-bitWindows ® 8.1operatingsystems(OS).
4-2 Chapter 4: Software support Chapter 4 The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to use the devices. The Utilities menu shows the applications and other software that the motherboard supports.
Z97-WS 4-3 Chapter 4 4.2.2 Obtaining the software manuals ThesoftwaremanualsareincludedinthesupportDVD.Followtheinstructionsbelowtoget thenecessarysoftwaremanuals. ThesoftwaremanuallesareinPortableDocumentFormat(PDF).
4-4 Chapter 4: Software support Chapter 4 4.3 Software information MostoftheapplicationsinthesupportDVDhavewizardsthatwillconvenientlyguideyou throughtheinstallation.Viewtheonlinehelporreadmelethatcamewiththesoftware applicationformoreinformation.
Z97-WS 4-5 Chapter 4 Launching AI Suite 3 Windows ® 7 OS FromtheDesktop,clickortap Start > All Programs > ASUS > AI Suite 3 > AI Suite 3 . YoucanalsolaunchAISuiteinWindows ® 7byclickingortapping ontheNotication area.
4-6 Chapter 4: Software support Chapter 4 AI Suite 3 main menu bar System Information USB 3.0 Boost Ai Charger+ EZ Update USB Charger+ USB BIOS Flashback Dual Intelligent Processors 5 AI Suite 3 Main .
Z97-WS 4-7 Chapter 4 4.4.1 Ai Charger+ AiCharger+allowsyoutofast-chargeyourportableBC1.1*mobiledevicesonyour computer’sUSBportthreetimesfasterthanthestandardUSBdevices**.
4-8 Chapter 4: Software support Chapter 4 4.4.2 USB 3.0 Boost USB3.0BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically speedsupthetransferratesofyourUSBstoragedevices. Launching USB 3.
Z97-WS 4-9 Chapter 4 4.4.3 EZ Update EZUpdateisautilitythatallowsyoutoautomaticallyupdateyourmotherboard’ssoftware, driversandBIOSeasily. Withthisutlity,youcanalsomanuallyupdatetheBIOSandselectthebootlogothatdisplays duringPOST.
4-10 Chapter 4: Software support Chapter 4 Manually update the BIOS and selecting a boot logo Click or tap to search an image file for your boot logo Click or tap to go back to EZ Update main screen C.
Z97-WS 4-11 Chapter 4 4.4.4 USB BIOS Flashback USBBIOSFlashbackallowsyoutocheckandsavethelatestBIOSversiontoaUSB storagedevice.UsethisutilitytoquicklycheckforthelatestavailableBIOSandsettheBIOS downloadschedule.
4-12 Chapter 4: Software support Chapter 4 Downloading the latest BIOS Beforeyoustartdownloading,ensurethatyouhaveinstalledtheUSBstoragedeviceto yourcomputer’sUSBportthatsupportsUSBBIOSFlashback.
Z97-WS 4-13 Chapter 4 4.4.5 USB Charger+ USBCharger+allowsyoutoquick-chargeyourportableUSBdevicesevenifyourcomputer isoff,insleepmodeorhibernatemode.
4-14 Chapter 4: Software support Chapter 4 4.4.6 Push Notice Thisutilityallowsyougetthedetailedstatusofyoursystemtoyoursmartdevice.Youcan alsosendmessagestoyoursmartdeviceusingthisutility.
Z97-WS 4-15 Chapter 4 Setting up PC Mode alerts of your computer Thisfeatureallowsyoutorestart,shutdown,orputyourcomputertosleepmodeandsends analerttoyoursmartdevice.
4-16 Chapter 4: Software support Chapter 4 Viewing your computer status on your smart device Tap Push Notice onyoursmartdevicetolaunchPushNotice. Sending messages to your smart device Thisfeatureallowsyoutosendmessagestoyoursmartdevice.
Z97-WS 4-17 Chapter 4 4.4.7 System Information Thisutilityallowsyougetthedetailedinformationofthemotherboard,CPU,andmemory settings.
4-18 Chapter 4: Software support Chapter 4 4.5 Audio configurations TheRealtek ® audioCODECprovides8-channelaudiocapabilitytodelivertheultimateaudio experienceonyourcomputer.ThesoftwareprovidesJack-Sensingfunction,S/PDIFOut support,andinterruptcapability.
Z97-WS 4-19 Chapter 4 A. Realtek ® HD Audio Manager with DTS UltraPC II for Windows ® 8.1 / Windows ® 8 / Windows ® 7 Configuration option tabs (vary with the audio devices connected) Advanced set.
4-20 Chapter 4: Software support Chapter 4 4.6 ASUS Dr. Power Utility ASUSDr.Powerisamonitoringutilitythatprovidesnoticationswhenthepowersupply isunabletoprovidesufcientpowertothesystem.
Z97-WS 4-21 Chapter 4 WhenASUSDr.Powerdetectsthatyoursystemisrunninglowonpower,anevent noticationpopsuptoindicatethatyourpowersupplyrequiresattention.Themessagewill bedisplayedfor15secondsoruntilyouclicktheClosebutton.
4-22 Chapter 4: Software support Chapter 4.
Z97-WS 5-1 Chapter 5 RAID support 5 5.1 RAID configurations The motherboard supports Intel ® Rapid Storage Technology with RAID 0, RAID 1, RAID 10, and RAID 5 solution.
5-2 Chapter 5: RAID congurations Chapter 5 5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID conguration: 1.
Z97-WS 5-3 Chapter 5 5.1.4 Intel ® Rapid Storage Technology Option ROM utility To enter the Intel ® Rapid Storage Technology Option ROM utility: 1. Turn on the system.
5-4 Chapter 5: RAID congurations Chapter 5 Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
Z97-WS 5-5 Chapter 5 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),then press <Enter>.
5-6 Chapter 5: RAID congurations Chapter 5 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press <Enter>.
Z97-WS 5-7 Chapter 5 Exiting the Intel ® Rapid Storage Technology Option ROM utility To exit the utility: 1. From the utility main menu, select 5. Exit , then press <Enter>. The following warning message appears: 2. Press <Y> to exit or press <N> to return to the utility main menu.
5-8 Chapter 5: RAID congurations Chapter 5 5.2.2 Creating a RAID driver disk in Windows ® To create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Plug the USB oppy disk drive and insert a oppy disk. 3. Place the motherboard support DVD into the optical drive.
Z97-WS 6-1 Chapter 6 Multiple GPU support 6 6.1 AMD ® CrossFireX™ technology The motherboard supports the AMD ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-2 Chapter 6: Multiple GPU support Chapter 6 6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.
Z97-WS 6-3 Chapter 6 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. ConnectaVGAoraDVIcabletothe graphics card. 6.1.4 Installing three CrossFireX™ graphics cards 1.
6-4 Chapter 6: Multiple GPU support Chapter 6 6.1.5 Installing four CrossFireX™ graphics cards 1. Prepare four CrossFireX-ready graphics cards. 2. Insert the four graphics cards into the PCIEX16 slots. Refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.
Z97-WS 6-5 Chapter 6 6.1.6 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology.
6-6 Chapter 6: Multiple GPU support Chapter 6 Enabling Dual CrossFireX technology 1. IntheAMDVisionEngineControlCenterwindow,click Performance > AMD CrossFireX TM . 2. Select Enable CrossFireX TM . 3. Select a GPU combination from the drop-down list.
Z97-WS 6-7 Chapter 6 6.2 NVIDIA ® SLI™ technology ThemotherboardsupportstheNVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
6-8 Chapter 6: Multiple GPU support Chapter 6 4. AlignandrmlyinserttheSLIbridgeconnectortothegoldngersoneachgraphics card.Ensurethattheconnectorisrmlyinplace. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately.
Z97-WS 6-9 Chapter 6 4. Alignandrmlyinsertthe3-waySLI bridgeconnectortothegoldngerson each graphics card. Ensure that the connectorisrmlyinplace. 5. Connect three independent auxiliary power sources from the power supply to the three graphics cards separately.
6-10 Chapter 6: Multiple GPU support Chapter 6 6.2.6 Enabling the NVIDIA ® SLI™ technology Afterinstallingyourgraphicscardsandthedevicedrivers,enabletheSLIfeatureinNVIDIA ® ControlPanelundertheWindows ® 7operatingsystem.
Z97-WS 6-11 Chapter 6 B2. From the Screen Resolution window, click Advanced settings . B3. TheNVIDIAControlPanelwindow appears. Enabling SLI settings FromtheNVIDIAControlPanelwindow, select Configure SLI , Surround , PhysX .
6-12 Chapter 6: Multiple GPU support Chapter 6.
ASUS Z97-WS A-1 Appendices Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference.
A-2 Appendices Appendices IC: Canadian Compliance Statement ComplieswiththeCanadianICES-003ClassBspecications.ThisdevicecomplieswithRSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations.
ASUS Z97-WS A-3 Appendices REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.
A-4 Appendices Appendices Bluetooth Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
ASUS Z97-WS A-5 Appendices ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.com/ Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext.
A-6 Appendices Appendices.
Een belangrijk punt na aankoop van elk apparaat Asus Z97-WS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Asus Z97-WS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Asus Z97-WS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Asus Z97-WS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Asus Z97-WS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Asus Z97-WS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Asus Z97-WS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Asus Z97-WS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.