Gebruiksaanwijzing /service van het product DX9200HDDI van de fabrikant Pelco
Ga naar pagina of 20
DX9200HDDI Series IDE V ideo Storage Unit C637M-B (10/03) ® INST ALLA TION/OPERA TION.
CONTENTS Section Page REGULA TOR Y NOTICES ............................................................................................................. ......................................................................................... 3 RADIO AND TELEVISION INTERFERENCE .
C637M-B (10/03) 3 REGULA TORY NOTICES This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 C637M-B (10/03) IMPORT ANT SAFEGUARDS AND W ARNINGS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C637M-B (10/03) 5 DESCRIPTION The DX9200HDDI video storage unit is one of the components of the DX9000 system. The storage unit contains up to 14 IDE hard disk drives for storing video information from the DX9000 recorder . Up to four IDE storage units can be connected to a recorder .
6 C637M-B (10/03) FRONT VIEW Figure 1 shows the features on the front of the IDE storage unit. Figure 1. Front View 1. Panel: Use the features of this panel to view the configuration of the RAID or to enter the environment menu. Y ou must lower this panel to remove or add hard drives.
C637M-B (10/03) 7 11. Up arrow/Quit button: Used in conjunction with the Controller and ENC buttons. Press to scroll through the information on the LCD display , to move through each menu, or to go back to the previous menu. 12. Down arrow/Info button: Used in conjunction with the Controller and ENC buttons.
8 C637M-B (10/03) INST ALLA TION Make sure the following parts are supplied with the storage unit. 1V ideo Storage Unit with IDE hard drives 2 Power cords (1 USA standard and 1 European standard) 2 External SCSI cables 2 Active terminators (for connecting to SCSI channels) 2 Brackets 6 Screws, M4 x .
C637M-B (10/03) 9 MOUNTING The storage unit can be placed on a flat surface, such as a shelf, or it can be installed in a 19-inch (48.26 cm) wide equipment rack. NOTE: Allow one rack unit (1.75 inches or 4.5 cm) of space above the storage unit for air circulation.
10 C637M-B (10/03) STORAGE RECORDER A HOST B HOST A CHANNEL A SCSI CABLE STORAGE RECORDER A RECORDER B HOST B HOST A CHANNEL A CHANNEL A SCSI CABLE SCSI CABLE Figure 5. One Storage Unit/Two Recorder Configuration HARDWARE CONNECTIONS There are five hardware configurations.
C637M-B (10/03) 11 CHANNEL A CHANNEL B STORAGE B STORAGE A RECORDER HOST A HOST A SCSI CABLE SCSI CABLE CONNECTING TWO STORAGE UNITS TO ONE RECORDER 1. Connect a SCSI cable from Host A on Storage A to Channel A on the recorder . 2. Connect a SCSI cable from Host A on Storage B to Channel B on the recorder .
12 C637M-B (10/03) Figure 7. Three Storage Unit/One Recorder Configuration CONNECTING THREE STORAGE UNITS TO ONE RECORDER 1. Connect a SCSI cable from Host A on Storage A to Channel A on the recorder . 2. Connect a SCSI cable from Host A on Storage B to Channel B on the recorder .
C637M-B (10/03) 13 CONNECTING FOUR STORAGE UNITS TO ONE RECORDER 1. Connect a SCSI cable from Host A on Storage A to Channel A on the recorder . 2. Connect a SCSI cable from Host A on Storage B to Channel B on the recorder . 3. Connect a SCSI cable (DX9200HDDI-LCBL) from the Host A Out port on Storage A to the Host A In port on Storage C.
14 C637M-B (10/03) OPERA TION The storage unit has been preconfigured to operate using RAID Level 5 or RAID Level 5+1 technology . Pelco recommends RAID Level 5+1.
C637M-B (10/03) 15 TROUBLESHOOTING What do I do when the voltage warning LED illuminates red and an alarm sounds? This happens when the output DC voltage is under 4.5V or over 5.5V , and under 10.2V or over 13.8V . The ENC global fault LED also illuminates.
16 C637M-B (10/03) SERVICE HOW TO REPLACE A F AN The fans are hot-swappable. The spare part number for the fan is DX9200HDDI-F AN. THUMBSCREW HANDLE THUMBSCRE W HANDLE Figure 9. Replacing a Fan Figure 10. Replacing a Power Supply 1. Loosen the thumbscrew .
C637M-B (10/03) 17 HOW TO CHANGE FROM RAID 5 TO RAID 5+1 To change a RAID 5 configuration to a RAID 5+1 configuration, you must add a hot spar e hard drive. A hot spare hard drive becomes the replacement hard drive when a hard drive fails in the RAID 5+1 configuration.
POWER CONNECTOR 40-PIN ATA CABLE CONNECTOR LEVER RELEASE LEVER ATA CABLE CONNECTOR PORT JUMPER POWER PORT PHILLIPS SCREWS TRAY WITH HARD DRIVE Figure 11.
W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
Een belangrijk punt na aankoop van elk apparaat Pelco DX9200HDDI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco DX9200HDDI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco DX9200HDDI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco DX9200HDDI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco DX9200HDDI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco DX9200HDDI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco DX9200HDDI kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco DX9200HDDI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
