Gebruiksaanwijzing /service van het product PT780-24SL/PPSA van de fabrikant Pelco
Ga naar pagina of 28
PT780-24P/PPPSA PT780-24SL/PPSA Pan/Tilts Installation/ Operation Manual C342M-PSA (11/98) Pelco • 300 W. Pontiac Way, Clovis • CA 93612-5699 USA • Pelco Online @ http://www.
2 Pelco Manual C342M-PSA (11/98) 2 CONTENTS Section Page 1.0 GENERAL ................................................................................................... 5 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 5 2.0 DESCRIPTION .
Pelco Manual C342M-PSA (11/98) 3 3 LIST OF ILLUSTRA TIONS Figure Page 1 Connector Assembly .......................................................................... 9 2 Wiper On/Off Connection .........................................................
4 Pelco Manual C342M-PSA (11/98) (This page intentionally left blank.) 4.
Pelco Manual C342M-PSA (11/98) 5 Please thor oughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
6 Pelco Manual C342M-PSA (11/98) 2.0 DESCRIPTION The PT780-24P/PPPSA and PT78024SL/PPSA pan/tilt units are designed for me- dium-duty , indoor/outdoor use. The PT780-24P/PPPSA pan/tilt is designed for use with the EH4718L/WPSA and EH4718L/PSA environmental enclosures.
Pelco Manual C342M-PSA (11/98) 7 3.0 INST ALLA TION 3.1 MOUNTING Attach the pan/tilt unit to a wall or ceiling mount. Follow the instructions that are provided with the mount.
8 Pelco Manual C342M-PSA (11/98) 3.3.2 All Contr ol Equipment Except LRD41A11-X Legacy Receiver/Drivers Make the interconnecting cable to link the 37-pin round connector from the pan/tilt unit to the control equipment.
Pelco Manual C342M-PSA (11/98) 9 1 CABLE HOUSING A SHELL B CLAMP 2 RUBBER BOOT 3 CABLE 4 SOCKET 5 CABLE PLUG (37-POSITION) Figure 2. Wiper On/Off Connection Figure 1.
10 Pelco Manual C342M-PSA (11/98) T able A. 37-Position Connector Pin Designations Pin # Function ENG PT780-24P/PP E NGPT780-24SL/P Coaxial Cable 27/4 V ideo Signal/Ground • • 30/4 Sync Signal/Gro.
Pelco Manual C342M-PSA (11/98) 11 T able B. Requirements to Wire Power to Pan and Tilt Motors Maximum Cable Length* Wire Size 6 Conductors** 7 Conductors*** 24 V AC PT780-24P Models 20 AWG 59 ft. (17.98 m) 1 18 ft. (35.96 m) 18 AWG 94 ft. (28.65 m) 188 ft.
12 Pelco Manual C342M-PSA (11/98) 3.4 P AN AND TIL T LIMIT STOP ADJUSTMENTS 1. Remove the covers. a. Refer to Figure 3 and remove the Phillips screw on each side of the pan/ tilt unit. b. Refer to Figure 4 and place your hands under the cover halves. Exert a strong, upward force to release the covers from their internal latching devices.
Pelco Manual C342M-PSA (11/98) 13 Figure 7. Tilt Limit Adjustment 3 4 2 1 10 G H 9 A B C D 8 7 E F 6 5 2. Adjust the tilt limit stops. Refer to Figure 7 for the location of the tilt limit stops (item 7). T urn the control unit on and tilt the unit to the desired up position.
14 Pelco Manual C342M-PSA (11/98) 3. Adjust the pan limit stops. Refer to Figure 8 for the location of the pan limit stops. Turn the control unit on and pan the unit to the desired right limit stop. Move the right limit stop until it touches the limit switch actuator .
Pelco Manual C342M-PSA (11/98) 15 3.5 FINAL INST ALLA TION 1. If the pan/tilt is installed in an inverted position, refer to Figure 9 and apply R TV silicone (such as Bostik #9732 or equivalent) to the shaded areas of the covers. 2. Replace the covers.
16 Pelco Manual C342M-PSA (11/98) Figure 1 1. Securing the Cover Halves Figure 12. Silicone Application Location for Upright Unit 00082.
Pelco Manual C342M-PSA (11/98) 17 4.0 OPERA TION Refer to the manual for your control equipment for operating the pan/tilt unit. If your enclosure has the heater blanket option, it is thermostatically controlled to turn on at 40 ° F (4.44 ° C) and turn of f at 60 ° F (15.
18 Pelco Manual C342M-PSA (11/98) (7) Line up the hole in the gear train nut with the nearest hole in the gear train bracket (E). (8) Replace the screw . b. Refer to Figure 13. Adjust chain tension, if needed: (1) Locate the pan or tilt motor on the assembly .
Pelco Manual C342M-PSA (11/98) 19 6.0 EXPLODED ASSEMBL Y DIAGRAMS Figure 14. Exploded Assembly Diagram of Mechanical Parts.
20 Pelco Manual C342M-PSA (11/98) Item Quantity Description Part Number 1 1 Cover , pan side 9064003COMP 2 2 Ball stud PT180410000 3 2 Ball stud bracket 9064010COMP 4 1 Pan motor , 24 V AC 5708007 5 1 Pan motor gearhead 1758006 6 1 Pan motor sprocket 5804010ACOMP 7 1 Pan motor bracket 9064006COMP 8 1 T ilt preset potentiometer POTP010.
Pelco Manual C342M-PSA (11/98) 21 Item Quantity Description Part Number 42 1 Pan potentiometer bracket 9004008COMP 43 1 Gear , 56 teeth 90010020* 44 1 Pan preset potentiometer POTDARM010.
22 Pelco Manual C342M-PSA (11/98) Item Quantity Description Part Number 1 1 Pan spindle 9004027COMP 2 1 Upright, pan side 9064016COMP 3 1 T ilt shaft 9004028COMP 4 1 Switch spacer (.
Pelco Manual C342M-PSA (11/98) 23 Figure 16. Exploded Assembly Diagram of Hardware EE W J BB J W J CC Q E F E F A B C D M T S PP G H I J K L EE FF I J I J MM LL X GG Z T S Y W J R S T J W BB A* B* C* .
24 Pelco Manual C342M-PSA (11/98) Refer to Figure 15 and T able E for modifications to this list. Item Quantity Description Part Number A 4 Screw, 6-32 x 2 1/2-inch, pan head, Phillips ZH6-32X2.50SPP B 4 Flat washer ZH932X1.75X130 C 4 Split lock washer , #6 ZH6L WSSL D 4 Hex nut, 6-32 ZH6-32NUTSH E 12 Allen screw, 10-32 x 3/8-inch ZH10-32X.
Pelco Manual C342M-PSA (11/98) 25 Figure 17. PT780-24P/PPPSA and PT780-24SL/PPSA Wiring Diagram 7.0 WIRING DIAGRAM.
26 Pelco Manual C342M-PSA (11/98) 8.0 SPECIFICA TIONS MECHANICAL Pan Rotation: Movement in horizontal plane: 0-355 ° 0-360 ° (SL model only) Pan Speed: 9 ° /sec +/-1 ° (no load condition) Tilt Rotation: 90 ° down from horizontal 60 ° up from horizontal Tilt Speed: 3 ° /sec +/-.
Pelco Manual C342M-PSA (11/98) 27 Figure 18. PT780-24P/PPPSA and PT780-24SL/PPSA Dimension Drawing.
28 Pelco Manual C342M-PSA (11/98) 9.0 W ARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Een belangrijk punt na aankoop van elk apparaat Pelco PT780-24SL/PPSA (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco PT780-24SL/PPSA heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco PT780-24SL/PPSA vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco PT780-24SL/PPSA leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco PT780-24SL/PPSA krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco PT780-24SL/PPSA bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco PT780-24SL/PPSA kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco PT780-24SL/PPSA . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
