Gebruiksaanwijzing /service van het product S55 van de fabrikant Pentax
Ga naar pagina of 148
Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera..
Thank you for purchasing the PENTAX Digital Camera. Please read this manual before using t he camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
1 Sufficient attention has been paid to the safety of this product but ple ase pay particular attention to the warnings indicated by the following symbols during use.
2 Caution • Never tr y to disassemble or short the bat tery. Also, do not dispose of the battery in fire, as i t may explode. • Do not charge any batteri es other than recharge able Ni-MH batteries. The battery could explode or catch fire. The bat teries that can be used in this camera, only the Ni-MH battery ca n be recharged.
3 Caution • Do not pl ace heavy objects on the AC plug cord , allow heavy objects to drop onto it or allow the AC plug cord to become dama ged due to excessive bending. If the AC plug cord becomes damaged, consu lt a PENTAX Service Center. • Do no t short or t ouch the outp ut terminals of the product whi le it is still plugged in.
4 • Take the i nternational warranty card wi th you when you travel abroad. Also take the Wo rldwide Service Network t hat is included in the package.
5 • If the camera is sub jected to rapi d temperature c hanges, condensat ion may form on the inside and out side of the camera. Therefore put the ca mera in a bag or plastic bag, a nd take the camera out when the dif ference in t emperature has subsided.
6 FOR SAFE USE OF YOUR CAMERA ............................................. 1 Care to be Taken During Handling ................................................... 4 Contents .......................................................................... ..
7 Taking Pictures 44 Taking Pictures ..... .............................................................................. 44 Changing the Mode ........................................................................ 44 Selecting the Capture Mode .....
8 Playback/Deletin g/Editing 90 Playing Back Images .......................................................................... 90 Playing Back Still Pictures .............................................................. 90 Zoom Display ..............
9 Appendix 130 List of City Codes ............................................................................. 130 Optional Accessories ....................................................................... 131 Messages .............................
Memo 10.
11 This operating manual contains the followin g chapters. 1 Getting Started ––––––––––––– –––––––––––––––––– –––––––––– This chapter explains what you nee d to do after pu rchasing the camera before you start taking pictures.
12 Checking the Contents of the Package Camera Optio S55 Strap O-ST20 ( ∗ ) Software (CD-ROM) S-SW32 AV cable I-AVC7 ( ∗ ) USB cable I-USB7 ( ∗ ) Two AA alkaline batteries Operating Manual (this.
13 Front Back Names of Parts Shutter release butto n Remote control receiver Self-timer lamp Power switch Flash PC/AV terminal Lens DC input terminal Termin al cove r Speaker Microphone Card co ver Ba.
14 Guide Indications A guide to a vailable button op erations appears on the LCD monitor during operation. The buttons are indicated as shown below. Names of Operating Parts Four-way co ntroller ( 2 ).
15 1 Getting Started Getting Started Attaching the Strap Pass the narrow end of the strap thr ough the strap lug and pass the other end through the loop.
16 1 Getting Started Powering the Camera Insert the batter ies in the camera. Use two AA alkaline, AA lithium, AA Ni-MH, or AA nickel mangan ese batteries or one CR-V3 battery. 1 Open the b attery cove r. Slide the battery cove r in the direction ind icated by the arrow and flip the co ver open .
17 Getting Started 1 • Number of Recorda ble Images and Playba ck Time (at 23°C with new batteries) The following shows the number of shots and playback time possible when using various batterie s.
18 Getting Started 1 If you intend to use the LCD monitor for a long time or connect the camera to a PC, use of the AC adapter D-AC5 is recommended. 1 Make sure that the ca mera is turned off and open the terminal cover. 2 Connect the DC terminal on the AC adapt er to the DC input terminal on the camera.
19 Getting Started 1 AC adapter D-AC5 (optional) is designed to switch automatically to the voltage (100-24 0V) and frequency (50Hz, 60Hz) of the electricity supply in the country or region where used. However, electrical socket shapes di ffer depending on the country or region.
20 Getting Started 1 Main Socket Types in th e Major Countries and Regions of the World AB B F C S North America U.S.A., Canada 9 Europe, Former Soviet Union Iceland, Ireland, Italy, Ukraine, Austria, Netherlands, Kazakhstan, Greece, Sw eden, Denmark, Germany, Norway, Hunga ry, Finland, France, Belarus, Belgium, Rumania, Russia 9 U.
21 1 Getting Started Installing the SD Memory Card This camera uses an SD Memory Card. Captured imag es are recorded on the SD Memory Card if a card is inserted ( appears on the LCD monitor) or in the built-in memory if no card is inserted ( appears on the LCD monitor).
22 Getting Started 1 Data Backup Very occasi onally, malfun ction of the came ra may cause dat a stored in the buil t-in memory to become unr eadable. As a bac kup measure, we rec ommend that you download impo rtant data to a PC or store the data in a med ia other than th e built-in memory.
23 Getting Started 1 Choose the number of recorded pixels and quality best suited to your purpose. Higher quality levels and numbers of recorded pixels produce clearer images for printing, but th e resulting increase in data vo lume reduces the total number of pictures that can be taken.
24 Getting Started 1 Appropriate Quality According to Use (Auto Select Mo de) The default sett ing is Super. Approximate Number of Recordable Imag es by Size and Quality When using the built-i n memor.
25 1 Getting Started Turning the Camera On and Off 1 Press the power switch. The camera turns on. The lens cover ope ns and the lens extends when the camera is turned on. 2 Press the power switch ag ain. The camera tur ns off. Switching between Capture Mode and Playback Mode 1 p.
26 Getting Started 1 When the camera is turned on in the Playback On ly mode, the lens does not extend. Use this mode when y ou want to imme diately play back images or audio data without shooti ng pictures. The mode does not switch to Capture mode even if t he shutter release button is pressed.
27 1 Getting Started Initial Setting After purchasing the came ra, before using it fo r the first time set the language, date and time. You can choose the lan guage in which the menus, error messages, etc.
28 Getting Started 1 If you have set the wrong language by mistake, use the followi ng procedure to reset the l anguage. 1 Press the MENU button twice. 2 Press the four-way contr oller ( 5 ) twice. 3 Press the four-way cont roller ( 23 ) to choose the [Langua ge/ ].
29 Getting Started 1 5 Press the four-way controller ( 23 ) to change the month. Set the day and year in the s ame manner. (Pressing the fo ur-way controller ( 4 ) moves the frame to the pr evious item.) If you select [12H] in step 3, the setting swit ches between AM and PM corresponding to the time.
30 2 Quick Start Quick Start Taking Still Pictures The standard pro cedure for taking still pictu res is described below. T he flash fires automatically depe nding on the light conditions. 1 Press the power switch. The camera turns on. 2 Set the mod e dial to R .
31 2 Quick Start The shutter relea se button works in a two-step action as follows. Press halfway The focus and exposure are locked when the shutter relea se button is pressed lightly (halfway). The shutter speed and aperture settings onl y appear on the LCD mo nitor when the shutter relea se button is pressed halfway.
32 2 Quick Start Quick Start Playing Back Still Pictures You can display the still picture you have just taken. 1 Press the Q Playback bu tton after taking a pict ure.
33 2 Quick Start 1 Press the Q Playback bu tton after taking a pictu re. The image appears on the LCD monitor. 2 Press the four-way contr oller ( 3 ). You can delet e the image di splayed on the LCD monitor by pressin g the i Delete button, using the four -way contro ller ( 2 ) to select [Delete] and pressing the OK button.
34 3 Common Operations Common Operations Using the Button Functions DISPLAY button Changes the information displayed on the LCD monitor. ( 1 p.45) Q Playback button Switches to the Playb ack mode. Press it and hold it down to retr act the lens. ( 1 p.
35 Common Operations 3 DISPLAY button Changes the information displayed on the LCD monitor. ( 1 p.93 ) Selects all images f or printing or protecting on the DPOF screen and Protect screen. ( 1 p.100 , p.105 ) i Delete button Deletes the image displayed on the LCD monitor.
36 Common Operations 3 Shutter release button When pressed, starts record ing, and when pressed again, st ops recording. ( 1 p.84) Q Playback button Switches to the Playb ack mode. When pressed again, re turns to Voice Recording mode. ( 1 p.85) Four-way controller (in Playback mode) ( 2 ) Starts playb ack.
37 3 Common Operations Using the Menus When you press the MENU button, the men us appear on the L CD monitor. You can set functions, save the setti ngs and change the camera settings on these men us. When you are making settings from a menu, a guide to operation appears on the LCD monitor.
38 Common Operations 3 Example of Menu Operation AWB Recorded Pixels Quality Level White Balance Focusing Area Multi Auto AE Metering Sensitivity 2560 Rec. Mode MENU OK OK O K OK Exit E x i t Exit AWB 2560 Recorded Pixels Quality Level Focusing Area Multi Auto AE Metering Sensitivity Rec.
39 Common Operations 3 The [ A Rec. Mode] menu appears when you press the MENU button in Capture mode, and the [ Q Playback] menu appears when you press the MENU button in Playback mode.
40 Common Operations 3 Pressing the zoom bu tton ( x ) while a menu is displayed enlarges the menu. Press w to return to the original display. Example of Menu Opera tion Enlarging a Menu Display If yo.
41 Common Operations 3 [ A Rec. Mode] Me nu Yes ... Adjustable # ... Any changes made are invalid in d , H and = modes. No ... A ny changes made are invalid. You ca n change the setting on the menu, but any changes you make are invalid in actu al operation.
42 Common Operations 3 [ Q Playback] Menu [ B Set-up] Menu ∗ The “Fn setting” is not available in the - mode. Item Description Page Protect For protecting images from dele tion p.99 DPOF For setting the pri nting service to prin t out images p.108 Slideshow For playing back recorded images successively p.
43 Common Operations 3 Memo.
44 4 Taking Pictures Taking Pictures Taking Pictures Capture mode is for taking pictures and Playback mode is for playing back or deleting i mages. • To change from Capture mode to Playback mode, p ress the Q Playback button.
45 Taking Pictures 4 The LCD monitor display changes each time you press the DISPLAY button. Normal Display Shooting information is displa yed when the power is turned on.
46 Taking Pictures 4 A histogram is a graph showing the brightness of an image on the horizontal axis and the number of pixels on the vertical axis (distribution chart of the brightness). The histogram will help you detect the brightness of the image you have taken.
47 Taking Pictures 4 - (Auto Select) mode is the simplest way to take pictures without having to set any functions. The camera automatically chooses the optimal settings for t he shootin g scene whe n the shutte r release bu tton is pressed halfwa y. 1 Set the mod e dial to - .
48 Taking Pictures 4 You can display the Help screen while takin g or viewing picture s in Auto Select mode. The Help screen describes the function of each button, such as the four-way contro ller keys and zoom button. 1 Set the mod e dial to - . 2 Press the 0 button.
49 Taking Pictures 4 In R (Program) mode, the camera automatically sets the shutter speed and aperture for taking sti ll pictures . However, you can select othe r functions such as the flash mode or continuou s shooting mode. 1 Set the mod e dial to R .
50 Taking Pictures 4 You can select the Picture mode according to the shooting scene. There are 9 available modes in Picture mode. 1 Set the mod e dial to d .
51 Taking Pictures 4 3 Use the four-way controller ( 2345 ) to choose the Picture mode. 4 Press the OK button. The Picture mode i s selected. 5 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 6 Press the shutter relea se button fully.
52 Taking Pictures 4 You can take pictur es of dark scenes, such as nightscapes, with the appropriate settin gs. 1 Set the mod e dial to . . 2 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 3 Press the shutter relea se button fully.
53 Taking Pictures 4 This mode lets you take landscape views using the optimal settings. 1 Set the mod e dial to H . 2 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 3 Press the shutter relea se button fully.
54 Taking Pictures 4 This mode lets you take movies. Sound can be recorded at the same time. 1 Set the mod e dial to C . The following in formation appears on th e LCD monitor. 1 Flash Off icon 2 Movie mode icon 3 Card/Built-in memory 4 Recordable time 2 Press the shutter relea se button.
55 Taking Pictures 4 3 Press the shutter relea se button. Recording stops and the flash stat us lamp goes off. Recording starts when you keep the shutter release button pressed for more than one second. The movie will be taken for as long as you keep the button pres sed.
56 Taking Pictures 4 - d R + C . H = You can use the zoom to change the shooting area. 1 Press the Zoom/ w / x butt on in Capture mode. x (Tele) : enlarges the subj ect. w (Wide) : enlarges the area captured by the camera. The digital zoom functi on is turned on in initial setti ngs.
57 Taking Pictures 4 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Digital Zoom]. 3 Use the four-way controller ( 45 ) to select P (Off). 4 Press the OK button. The camera is ready to take pictu res.
58 Taking Pictures 4 - d R + C . H = 1 Press the four-way contr oller ( 2 ) in Capture mode t o display g or r on the LCD monitor. 2 Press the shutter relea se button halfway. The focus frame turns green if th e subject is in focus. 3 Press the shutter relea se button fully.
59 Taking Pictures 4 - d R + . H = Pictures are taken continuously while the shutter release button is pressed. 1 Press the four-way contr oller ( 2 ) in Capture mode to display j on the LCD monitor. 2 Press the shutter relea se button halfway. The focus frame turns green if th e subject is in focus.
60 Taking Pictures 4 - d R + C . H = You can switch the Drive mode to Remo te Control mode and take pictures using the remote control unit for Pentax camera s (optional). The remote control receiver is on the front of the camera. Operate the remote control unit to ward the camera l ens.
61 Taking Pictures 4 Life of the Battery for the Rem ote Control Unit A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTA X customer se rvice center if the battery needs changing. (A charge is made for changing the battery.
62 Taking Pictures 4 + You can take two imag es in succession and place them side by sid e to form a single picture. The first image is positioned in th e left half of the picture and the second image in the righ t half. 1 Set the mod e dial to + . 2 Press the four-way contr oller ( 3 ).
63 Taking Pictures 4 + You can take a numb er of images and jo in them together to form a panorama picture. The software (ACDSee for PENTAX) on the CD-ROM (S-SW32) provided w ith the camera and a computer are neces sary for joining the images.
64 Taking Pictures 4 6 Take the first image. Press the shutter rele ase button to take the first image. The right edge of the image appears in semi-tra nsparent form on t he left of the LCD monitor. 7 Move the camera to the right and take the second image.
65 4 Taking Pictures Setting the Shooting Functions - d R + C . H = Focus mode 1 Press the four-way contr oller ( 5 ) in Captur e mode. The focus mode c hanges each ti me the button is pressed and t he icon appears on the LCD monitor. The camera is ready to take pictu res in the selected foc us mode.
66 Taking Pictures 4 When the mode is set to z (Manual Focus), the central portion of the picture is enlarged to full screen on the LCD monitor for focus adjustment. Pressing the four-way controll er ( 23 ) displays the indica tor on the LCD monitor. Use the indicator as a guide while adjustin g the focus with the four-way controller ( 23 ).
67 Taking Pictures 4 - d R + . H = Flash Mode s 1 Press the four-way contr oller ( 4 ) in Captur e mode. The flash mode chan ges each time the button is pressed and the icon appears on the LCD mo nitor. The camera is ready to take pictu res in the selected fl ash mode.
68 Taking Pictures 4 d R + . H = You can choose the number of recorded pixels from [25 60×1920], [2304×1728], [2048× 1536], [1600×1 200], [1024×768] and [640×480]. The more pixels there are, the larger the picture and the bigger the file size. The data volume also varies depending on the quality level setting ( 1 p.
69 Taking Pictures 4 d R + . H = You can choose the image compression rate. The more stars, the clearer the qua lity and the larger the vol ume. The data volume also varies dependin g on the recorded pixels setting ( 1 p.68). Quality Levels 1 Press the MENU button in Capture mode.
70 Taking Pictures 4 - You can set the recorded pixels and quality together in Auto Select Mode. The combination of recorded pixels and quality for each setting is shown below. Image Quality * The letter M indicate s megapixel. 1 megapixel is 1 million pixels.
71 Taking Pictures 4 R + C . The color of the subject chan ges depending on the light source. For example, the white colo r in a subje ct is different wh en under natura l or artificial light. White balance i s used to adjust the color of white according to the ligh t source.
72 Taking Pictures 4 Place a white material such as a piece of white paper in front of you r camera to adjust white balance. 1 Select [ K ] (manual) on the [White Balance] screen. 2 Point the camera at the white material so that it fills the frame of the LCD monitor.
73 Taking Pictures 4 d R + . H = You can change the a utofocus area (Focusing Area). Focusing Area 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Fo cusing Area]. 3 Use the four-way controller ( 45 ) to change the setting .
74 Taking Pictures 4 d R + C . H = You can choose which part of the screen to use to measure the brightness and determine the exposure. AE Metering Modes 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [AE Metering].
75 Taking Pictures 4 d R + . H = You can select the sensiti vity to su it the b rightness of the surroundings. Sensitivity 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Sensitivit y].
76 Taking Pictures 4 C You can choose 30 fps (frames per second) or 15 fps for the frame rate. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Frame Rate]. 3 Use the four-way controller ( 45 ) to change the frame rat e.
77 Taking Pictures 4 d R + . H = You can choose the Instant Review ti me from 0.5 sec., 1 sec., 2 sec., 3 sec., 5 sec. and Off (no display). 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Instant Review].
78 Taking Pictures 4 R + . You can choose whether you want the image to have sharp or soft outlines. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Sha rpness]. 3 Use the four-way controller ( 45 ) to change the setting from x [Normal] to z [Hard (+)] o r y [Soft (–)] .
79 Taking Pictures 4 R + . You can set the color saturation. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [Satura tion]. 3 Use the four-way cont roller ( 45 ) to change the setting from x [Normal] to z [High (+)] or y [Low (–)].
80 Taking Pictures 4 R + . You can set the image contrast. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [Contras t]. 3 Use the four-way cont roller ( 45 ) to change the setting from x [Normal] to z [High (+)] or y [Low (–)].
81 Taking Pictures 4 d R + C . H = You can adjust the overall brightne ss of the picture. Use this function to take pictures that are intentionally overexp osed or underexposed. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears.
82 4 Taking Pictures Saving the Settings You can choose whether you want the set values to be saved when the camera is turned off. If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off.
83 Taking Pictures 4 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Me mory]. 3 Press the four-way contr oller ( 5 ). The [Memory] menu appears. 4 Use the four-way controller ( 23 ) to choose an item.
84 5 Recording and Playbac k of Sound Recording and Playback of Sound Recording Sound (Voi ce Recording Mode) You can record sound. The recordable time appears on the LCD monitor according to how much space is available on the SD Me mory Card or the built-in memory.
85 5 Recording and Playbac k of Sound Playing Back Sound You can play back the recording you made in Voice Recordi ng mode. 1 Press the Q Playback bu tton. 2 Use the four-way controller ( 45 ) to choose the recording t o play back. 3 Press the four-way contr oller ( 2 ).
86 5 Recording and Playbac k of Sound Adding Sound (Voice Memo) to Images You can add sound (voice memo) to a captured image. 1 Enter the Playback mode and use the four-way controlle r ( 45 ) to choose the image t o which you want to add a voice memo.
87 5 Recording and Playbac k of Sound You can set the camera not to reco rd voice memos while playing back still images to prevent any voice memo from being recorded. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [ Record Voice Memo ].
88 5 Recording and Playbac k of Sound 1 Enter the Playback mode and use the four-way controlle r ( 45 ) to choose the image with the voice memo that you want to play bac k. If U appears, a voice memo has been recorded for the d isplayed image. 2 Press the four-way contr oller ( 2 ).
89 5 Recording and Playbac k of Sound Memo.
90 6 Playback/Deleting/Editin g Playback/Deleting/Editing Playing Back Images Press the Q Playback button. Refer to “Playing Back Ima ges” (p.32) for instructions. You can display images magnifie d up to 12 times. A guide to operation appears on the LCD monitor during magnification.
91 6 Playback/Deleting/Editin g You can display the image at maximum magnification simply by pressing the Zoom/ f / y button once d uring zoom playback. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [ Quick Zoom ].
92 6 Playback/Deleting/Editin g You can play back movies. A guide to operation app ears on the LCD monitor during playba ck. Sound is recorded at the same time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose the mo vie to play back.
93 6 Playback/Deleting/Editin g Shooting information can be d isplayed on the LCD monitor in Playback mode. Pressing the DISPLAY button changes the display mode.
94 6 Playback/Deleting/Editin g You can display n ine images at the same time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose an image. 2 Press w / f on the Zoom/ f / y button. Nine images appear. Use the four-way controller ( 2345 ) to choose an image.
95 6 Playback/Deleting/Editin g You can play back all the image s on the SD Memory Card or in the built- in memory continuousl y. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choo se the image with which t o start the slideshow.
96 6 Playback/Deleting/Editin g Deleting You can delete images and sound recordings one at a time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose the ima ge or sound to delete. 2 Press the i Delete button. The Delete screen appears.
97 6 Playback/Deleting/Editin g If an image has a voice memo, you can delete the voice memo without deleting the image. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose an image with a voice memo to delete. 2 Press the i Delete button.
98 6 Playback/Deleting/Editin g You can delete all the images and sounds at once. 1 Press the i Delete button twice in Playback mode . The Delete All screen appea rs. 2 Use the four-way controller ( 2 ) to select [Delete All]. 3 Press the OK button. All the images and sounds are del eted.
99 6 Playback/Deleting/Editin g You can protect imag es and sounds from being accidentally deleted. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [Protect ]. 3 Press the four-way controller ( 5 ).
100 6 Playback/Deleting/Editin g You can protect al l the images and sou nds. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [Protec t]. 3 Press the four-way contr oller ( 5 ). The Protect scre en appears.
101 6 Playback/Deleting/Editin g Viewing Images on a TV By using th e AV cable, you can capture and play back images on a TV or other equipme nt with a video IN jack. Make sure that both the TV and the camera are turned off before connecting the cable.
102 6 Playback/Deleting/Editin g You can use the remote con trol unit to view the next image or the previous image while watching the images o n a TV. 1 Press the shutte r release button on the remote control unit. The image fol lowing the current image is pla yed.
103 6 Playback/Deleting/Editin g Setting the Printing Service (DPOF) You can print the images on the SD Memory Card or the bui lt-in memory using a DPOF (Digital Print Ord er Format) compatible pri nter or at a printing service. Set the following items for each image.
104 6 Playback/Deleting/Editin g 5 Use the four-way controller ( 45 ) to choose the number of copie s, then press the fo ur-way controller ( 3 ). The frame move s to [Date]. 6 Use the four-way controller ( 45 ) to choose whe ther to inse rt the date or not.
105 6 Playback/Deleting/Editin g 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [D POF]. 3 Press the four-way contr oller ( 5 ). The DPOF screen appears. 4 Press the DISPLAY button.
106 6 Playback/Deleting/Editin g Direct Printing Using PictBridge By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera , you can print imag es directly from the camera without using a PC.
107 6 Playback/Deleting/Editin g 1 Use the four-way controller ( 23 ) to select [Print One] . 2 Press the OK button. The Print One screen appears. 3 Use the four-way controller ( 45 ) to choose the imag e to print. 4 Use the four-way controller ( 23 ) to choose the number of cop ies.
108 6 Playback/Deleting/Editin g 1 Use the four-way controller ( 23 ) to select [Print All]. 2 Press the OK button. The Print All screen appears . 3 Use the four-way controller ( 23 ) to choose the number of cop ies. The number of copies yo u choose applies to all the images.
109 6 Playback/Deleting/Editin g Disconnect the came ra from the printer when you have finished printing. 1 Turn the camera off. 2 Disconnec t the USB cable from the camera .
110 6 Playback/Deleting/Editin g Editing Images By changing the size and quality of a selected image, you can make the file smaller than the orig inal.
111 6 Playback/Deleting/Editin g 6 Use the four-way controller ( 45 ) to change the recorded pixels. 7 Press the four-way contr oller ( 3 ). The frame move s to [Quality Level]. 8 Use the four-way controller ( 45 ) to chan ge the qua lity. 9 Press the OK button.
112 6 Playback/Deleting/Editin g The digital filters consist of e ight colo r filters (black-and-wh ite, sepia, re d, green, blue, black-and-white + red , black-and-white + green, black-and- white + blue), a soft filter, five illus tration filters and two sp ecial effect filters.
113 6 Playback/Deleting/Editin g 5 Use the four-way controller ( 23 ) to choose a digital filter. The filter effect is creat ed and the image appears on the LCD moni tor. The example shows an image with illustrati on filter 1 effect. 6 Press the OK button.
114 6 Playback/Deleting/Editin g Copying Files You can copy image and sound files from the built-in memory to the SD Memory Card and vice versa. This fun ction can only be selected when a card has been inserted in the camera. When files are copi ed from the built-in memory to the SD Memory Card, all the files are copie d at once.
115 6 Playback/Deleting/Editin g 4 Use the four-way controller ( 23 ) to select [ 5 ] and press the OK button. All the files are copi ed to the SD Memory Card. 4 Use the four-way controller ( 23 ) to select [ 5 ] and press the OK button. 5 Use the four-way controller ( 45 ) to select the file to copy.
116 7 Settings Settings Camera Settings Formatting will delete all the data on the SD Memory Card if you are using a card, and all the data i n the built-in memory if there is no card inserted. 1 Select [Format] on the [ B Set-up] menu. 2 Press the four-way contr oller ( 5 ).
117 7 Settings You can adjust th e playback volume and the volume of operation sounds, such as the start-u p sound , shutter sound and key operatio n sound. You can also change the type of sound. 1 Select [Sound] on the [ B Set-up] menu. Choosing [0] turns the volume of f.
118 7 Settings You can change the initial date a nd time settings. You can also se t the style in which the date and time appears on the ca mera. 1 Select [Date Adjust] on the [ B Set- up] menu. 2 Press the four-way contr oller ( 5 ). The Date Adjust screen appears.
119 7 Settings 6 Press the four-way contr oller ( 5 ). The frame move s to month. 7 Press the four-way contr oller ( 23 ) to change t he month. Set the day and year in the same manner. (Pressing the f our-way controller ( 4 ) moves the frame to the previous i tem.
120 7 Settings The date and time selected in “Initial Setting” (p.27) serve as the Home Time setting. You can display the time in a city other than the Home Time city (World Time). This is useful wh en taking pictures abroad. 1 Select [World Time] on the [ B Se t-up] menu.
121 7 Settings 6 Use the four-way cont roller ( 45 ) to turn [DST] O (On) or P (Off) and press the four-way co ntroller ( 3 ). The frame move s to W (Home Time) city. The default setti ng of the W (Home Time) city is [NY C (New York)]. Use the four-way controller ( 45 ) to change the W (Home Time) city and choose the DST settin g.
122 7 Settings 1 Select [Screen Setting] on the [ B Set-up] menu. 2 Press the four-way contr oller ( 5 ). The Screen Setting screen appears. You can display an i mage recorded with th e camera as the welcome screen when the camera is turned on. 3 Use the four-way controller ( 23 ) to select [Start-u p Screen].
123 7 Settings 8 Press the OK button four times. The camera is ready to take or play back imag es. You can choose the background design and color of the LCD monitor. 3 Use the four-way controller ( 23 ) to select [Background Color]. 4 Use the four-way controller ( 45 ) to choose the backgro und color.
124 7 Settings You can change the lan guage in which the menus, error messages, e tc. are display ed. You can choose from Eng lish, French, German, Spanish , Italian, Russian, Korean, Chin ese (traditional and simplified) and Japan ese. 1 Select [Lan guage/ ] on the [ B Set-up] menu.
125 7 Settings You can choose the output format (NTSC or PAL) for takin g or playing back images on a TV or other video device. 1 Select [Video Out] on the [ B Set-up] menu. 2 Use the four-way controller ( 45 ) to select [N TSC] or [PAL]. Choose the video output fo rmat to match the output format of the TV or other video d evice.
126 7 Settings You can change the USB connection mode depen ding on whether the USB cable is to be connected to a printer (PictBridge) or a computer. 1 Select [USB Connection] o n the [ B Set -up] menu. 2 Press the four-way contr oller ( 5 ). The USB connection mod e selection screen appears.
127 7 Settings You can set the camera to turn off automatically when no operation is performed for a fixed time. 1 Select [Auto Power Off] on the [ B Set-up] menu. 2 Use the four-way controller ( 45 ) to select [2 min] , [3 min], [5 min] or [Off]. 3 Press the OK button.
128 7 Settings You can choose the functi ons you use most frequently from those li sted in the [ A Rec. Mode] menu an d register them on the four-way controller. The functions can then be retri ev ed in Capture mode by pressing the 0 button to display the Function Mode screen, enabling you to change the setting using the four -way controller.
129 7 Settings 1 Align the mode dial with one of the following; d , R , + , . , H , = . 2 Press the 0 button in Capture mode. The functions regist ered on the four-way controller ( 2345 ) appear. 3 Use the four-way controller ( 2345 ) to choose the registered function and change the s etting.
130 8 Appendix Appendix List of City Codes Refer to the followi ng list of city codes when setting the World Time. TYO Tokyo JNB Johannes burg GUM Guam IST Istanbul SYD Sydney CAI Cairo NOU Noumea JRS.
131 8 Appendix Optional Accessories A number of dedicated accessories are available for this camera. AC adapter D-AC5 USB cable I-USB7 ( ∗ ) AV cable I-AVC7 ( ∗ ) Camera case O-CC32 Strap O-ST20 (.
132 8 Appendix Messages Messages such as the foll owing may appear on the LCD monitor du ring camera operation. Messages during shooting Messages during playback Compression error Co mpression of the image yo u captured has failed. Change the quality/ size and try ag ain.
133 8 Appendix Messages for both Messages such as the follow ing may appear on the LCD monitor when using the PictBridge function. Memory card erro r Shooting and playback are im possible due to a problem with the SD Memory Card. You may be able to pla y back images or soun ds on a PC.
134 8 Appendix Troubleshooting Problem Cause Remedy Camera will not turn on Batteries a re not installed Check ba tteries are installed .If not, ins tall batteries . Batterie s are instal led incorrectly Check orient ation of batteri es. Reinsert ba tteries accor ding to the +- symbols on the batte ry compartment.
135 8 Appendix Subject is not in focus Subject is d ifficult to focus on Subjects are difficult t o focus on usin g autofocus: objects wi th little contrast (blue sky, white wa lls, etc.), da rk objects, fin ely patterned objects, fast-moving objects, scenery th rough windo w or net, e tc.
136 8 Appendix Main Specifications Approximate Image Storage Capacity (when using the built-in memory (11MB )) Approximate Image Storage Capacity (when using the SD memory card (128 MB)) Type Fully automatic compact digital still camera with built-in zoom lens Effective Pixels 5.
137 8 Appendix White Balance Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual Lens Focal Length 5.8 mm - 17.4 mm (equivalent to 35.6 mm - 107 mm in 35 mm format) Maximum Aperture f/2.6 - f/4.8 Lens Composition 6 elements in 5 groups (two aspherical elements) Zoom Type Electrically driven Picture Range approx.
138 8 Appendix Battery Life Recording still images: A pproximately 370 images or less (when using the CR-V3 lithium battery) *1 Playback still images: Approximately 450 minutes or less (when using the.
139 8 Appendix Memo.
140 8 Appendix WARRANTY POLICY All PENTAX cameras purchased through authorized bona f ide photographic distribution channels are guaranteed against de fects of material or workmanship for a period of twelve months from date of purchase.
141 8 Appendix • This warranty policy does not a ffect the customer’s statut ory rights. • The local warranty policies availab le from PENTAX distributors in some countries can supersede this warranty poli cy.
142 8 Appendix For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is sub ject to the following two conditi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Comp uters and Peripherals We: Pentax Imaging Company A Division of PENTAX of Americ a, Inc.
Memo.
Memo.
PENTAX Corporation 2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pe ntax.co.jp/) PENTAX Europe GmbH (Europe an Headquarters) Julius -Vosseler- Strasse, 104, 225 27 Hamburg, GERMANY (HQ - http://w ww.pentaxeurop e.com) (Germany - http://www.
Een belangrijk punt na aankoop van elk apparaat Pentax S55 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pentax S55 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pentax S55 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pentax S55 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pentax S55 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pentax S55 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pentax S55 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pentax S55 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.