Gebruiksaanwijzing /service van het product 5500208-43 van de fabrikant Perle Systems
Ga naar pagina of 89
IOLAN DS1/TS2 Command Line Interface Reference Guide Version 4.3 Part #5500208-43 January 2012.
Copyright S tatement This document must not be repro duced in any way whatsoever , either printed or electronicall y , without the consent of: Perle Systems Limi ted, 60 Renfrew Drive Markham, ON Canada L3R 0E1 Perle reserves the right to make change s without further notice, to any products to improve reliability , function, or design.
IOLAN DS1/TS2 CLI Refere nce Guide, V ersion 4.3 3 Preface ........................ ....................................................... 11 About This Book .............. .................................... ...................... 11 Intended Audience .
4 Show Server ............. ................................................. ................ .............. 19 Hardware Commands ........... .............................. ........................ 20 Set Ethernet ......... ..........................
5 Show Sessions ................... ............................ .............. ............... ........... 29 Show Termtype .......... ................ .................................................. ........... 29 Start ................ .........
6 Show Interface ......... ................ ................................................. .............. 53 Show Modbus............. ................................................. ................. ........... 53 Show Telnet-Client..... .......
7 Gateway Commands .............. .............................. ...................... 62 Add Gateway .............. .................................................................. ........... 62 Delete Gateway .......... .........................
8 Set ................. ................................. ................................ ............... ........... 71 MOTD Commands .................. .............................. ...................... 71 Set MOTD .......... ................ ..
9 Set IOChannel Analog (True Analog) ......... ................ ............... ........... 81 Set IOChannel Analog (Tempera ture).......................................... ......... 83 Set IOChannel IOExtension ..... ............... .................
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 1 1 Preface About This Book This guide provides the information you need to configure the IOLAN using the Comm and Line Interface (CLI). Intended Audience This guide is for adm inistrators who w ill be configuring th e IOLAN.
12 Contacting T echnical Support Cont acting T echnical Support Making a T echnical Support Query Who T o Cont act Note: Perle offers free technical suppo rt to Perle Authori sed Distributors and Registered Perle Resellers.
13 Contacting T echnical Support Rep air Procedure Before sending a IOLAN for repair, you must contact your Perle supplier . If, however , you bought your product directly from Perle you can contact direct ly . Customers who are in Europe, Afri ca or Middle East can submit repair d etails via a websit e form.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 14 Introduction Chapter 1 1 Introduction This chapter provides the command line interface (CLI) options availabl e for the IOLAN. The commands are grouped by function. CLI Conventions This section explains how to interp ret the CLI synt ax.
CLI Conventions 15 IOLAN DS1/TS2 CLI Reference Guide, V ersion 4.3 z Options —Provides an explanation of each of the op tions for a command and the default value if there is one.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 16 Server Commands Chapter 2 2 This chapter defines all the CLI commands asso ciated with co nfiguring the IOLAN’ s server parameters. Server Commands Set Custom-App Description Y ou can create a custom application that can run on the IOLAN using the Perle SDK.
Server Commands 17 IOLAN DS1/TS2 CLI Reference Guide, V ersion 4.3 banner This parameter concerns the b anner informa tion (product name/so ftware version). This banner information is presente d to a user with a login prompt. For security reasons, you can turn off the display of this information.
18 Server Commands netmask The network subnet mask. For example, 255.255.0.0. oem-login When set, and a custom language file is in use, the login prompt will use the string defined in the language file as the login prompt inst ead of the default prompt, login: .
Server Commands 19 IOLAN DS1/TS2 CLI Reference Guide, V ersion 4.3 Set Service Description Sets server service parameters. User Level Admin Syntax Options telnetd httpd snmpd spcd syslog dmgrd modbusd Show Custom-App Description Shows the custom appli cation server settings.
20 Hardware Commands Hardware Commands Set Ethernet Description Sets the hardware configuration for th e Ethernet port(s). User Level Admin Syntax Options auto|10-half|10-full| 100-half|100-full Show Hardware Description Shows the hardware resources, Ethernet link status, date and time.
Modbus Commands 21 IOLAN DS1/TS2 CLI Reference Guide, V ersion 4.3 Modbus Commands Set Modbus Gateway Description Sets the Modbus parameters for the IOLA N wh en it is operating as a Modbus Gateway .
22 T ruePort Baud Commands Show Modbus Description Displays the Modbus Gateway parameters. User Level Admin Syntax T ruePort Baud Commands Set T ruePort Remap-Baud Description This command allows for the remapping of th e baud rate being specified by the Serial application to a different value on th e physical serial port on the IOLAN.
IPv6 Commands 23 IOLAN DS1/TS2 CLI Reference Guide, V ersion 4.3 IPv6 Commands Set IPv6 Description Configures the basic IPv6 settings. User Level Admin Syntax Options dhcpv6-settings ivp6-addr ess ne.
24 IPv6 Commands Add Custom-IPv6 Description Adds a custom IPv6 address to the IOLAN. Y ou can specify either a complete IPv6 address or an IPv6 network address.
IPv6 Commands 25 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Delete Custom-IPv6 Description Deletes the spec ified custom IPv6 add ress. T o see a list of configured IPv6 addresses, type the command delete custom-ipv6 ? . User Level Admin Syntax prefix-bits (auto) Specify the network prefix bits for the IPv6 a d dress.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 26 User Commands Chapter 3 3 This chapter defines all the CLI commands avai lable to users who are logged into the IOLAN. Commands for Users Logged Into the IOLAN Admin Description Changes a Normal-level user to the Admin user .
27 Commands for Users Logged Into the IOLAN Menu Description Switches from a command line based interface to Menu mode of operation. User Level Restricted, Normal, Admin Syntax Ping Description This command checks to see if a given host is reachable via an IP me ssage.
28 Commands for Users Logged Into the IOLAN Set User Description Sets the current users settings. User Level Normal, Admin Syntax Options hotkey-p refix language password Set User Session Description Sets the current users session settings.
29 Commands for Users Logged Into the IOLAN Show Line Users Description Shows the users who are on the line. User Level Admin Syntax Syslog Console Description Starts/stops or displays the status of the syslog console. User Level Admin Syntax Options start|stop Star t or stop console lo gging.
30 Commands for Users Logged Into the IOLAN Te l n e t Description Starts a telnet session to the specified host/IP address. User Level Normal, Admin Syntax telnet < hostname/IP_address > [< .
31 Configu ring Users Ve r s i o n Description Displays firmware version and build . User Level Normal, Admin Syntax Configuring Users Add User Description Adds a user . For units with 4 or less serial ports, you can configure up to 4 users. For units with 8 or mor e serial por ts, the maxi mum number of users which can be added is 48.
32 Configu ring Users hotkey-pre fix The prefix that a user types to control the current session. The default value is hex 01 , which corresponds to Ctrl-a ( ^a ) (hex value 02 would be Ctrl-b (^b), etc. ): z ^a number —T o switch from one session to another , press ^a and then th e required session number .
33 Configu ring Users line-access Specifies the user access rights to each IOLAN device line. Options are: z Read/Write —Users are given read an d write access to the line. z Read In —Users are given access to read only outbound dat a, data that is going from the IOLAN to the device.
34 Configu ring Users Set User Description Sets users settings. Normal-level users can configure only t heir own settings. Admin-level users can configure any users settin gs, including their own (with the exception of their User Level, which must st ay at Admin).
35 Configu ring Users level The access that a user is allowed: z Admin —The admin level user has total access to the IOLAN. Y ou can create more than one admin user account but we recomm end that you only have one. They can monitor and configure t he IOLAN.
36 Configu ring Users Set User Session Description Configures a users session settings. See Set User Ses sion on page 28 for the opt ions descriptions.
IOLAN DS1/TS2 CLI Referenc e Guide, V e rsion 4.3 37 Line Commands Chapter 4 4 This chapter defines all the CLI commands associat ed with configuring the IOLAN ’ s line parameters.
38 Line Commands Options br eak Specifies how a break is interpreted: z off —The IOLAN ignores the break key completely and it is not passed through to the host. This is the default setting. z local —The IOLAN deals with the break locally . If the user is in a session, the break key has the same effect as a hot key .
39 Line Commands hotkey-pre fix The prefix that a user types to lock a line or redraw the Menu. The default value is h ex 01 , which corresponds to Ctrl-a ( ^a ) (hex value 02 would be Ctrl-b (^b), etc.): z ^a l —(Lowercase L) Locks the line until the us er unlocks it.
40 Line Commands keepalive Enables a per -connection TCP keepalive f eature. After the configured number of seconds, the connection will send a gratuit ous ACK to the network peer , thus either ensuring the connection stays active OR cau sing a dro pped connection condition to be recognized.
41 Line Commands session strings Controls the sending of ASCII strings to se rial devices at sessi on start and session termination as follows; z Send at S tart —If configured , this string will be sent to the serial device when the serial device is detected (i.
42 Line Commands Set Line Interface Description Configures line interface (hardware) parameters. User Level Admin Syntax set line .|< number >|* interfa ce eia-232 [monitor-dcd on|off] [monitor-.
43 Line Commands Set Line Service echo-suppression This parameter applies only to EIA-485 Half Duplex mode. All characters will be echoed to the user and transmitted across the serial port s. Some EIA-485 applications require local echo to be enabled in order to monitor the loopback data to determine that line contentio n has occurred.
44 Line Commands < host_port > The port number the target host is listening on for incoming connections. direct Direct connections b ypass the IOLAN, enabling the user to log straight into a specific host. A direct connectio n is recommended where a user loggi ng in to the IOLAN is not required.
45 Line Commands Set Modem Description Sets the modem initialization string fo r a modem defined in the modem table. If you wish to add a new modem, use the add modem command. User Level Admin Syntax Options < mod em_name > Predefined modem name.
46 Line Service Commands Set T ermtype Description Sets the terminal type for th e current terminal session. term1, term2, and term3 refer to the user-uploadable custom terminal definitions .
47 Line Service Commands Set T elnet-Client Description Configures the T elnet parameters for the sp ecified line. When the IOLAN initiates a T elnet connection to a host, it is acting as a T elnet client. User Level Normal, Admin Syntax Options termtype line-mode map-cr -crlf local-echo echo eof erase intr quit escape set telnet-client line .
48 Line Service Commands Set UDP Description Configures the UDP settings for the serial line. User Level Normal, Admin Syntax Options entry 1|2|3|4 Selects which of the 4 available entries we wish to define/modify . For each entry the user can specify a dif ferent IP address ra nge, UDP port and direction of data flow .
49 Line Service Commands Set Vmodem Description This command associates a phone number w ith an IP address and TCP p ort. This enables an existing modem application to i ssue a dial command with a phone number .
50 Line Service Commands Set Vmodem-Phone signals dtr Y ou can specify how the DTR signal pin acts during your modem application connection, as itself (DTR), as DCD, or as RI. signals rts Y ou can specify how the R TS signal pin acts during you r modem application connection, as itself (R TS), as DCD, or as RI.
51 Line Service Commands Set Modbus-Slave Line Description Sets the Modbus slave pa rameters for the line. User Level Admin Syntax Options crlf protocol uid-range Set Modbus-Master Line <ip _address > Specify the IP address of the remote hos t that is receiving the vmodem connection.
52 Line Service Commands Set Multihost Line Description Configures multiple hosts or a prim ary/back up host schema fo r Silent Raw , Reverse Raw , or Client-Initi ated T ruePort servi ce types (multihost must be enabled by the line service type for this to take effect, see Set Line Service on page 43 for the command to enable multihost).
53 Line Service Commands Show Custom-App Description Shows the custom application line settings. User Level Admin Syntax Show Interface Description Shows the network interface information. User Level Admin Syntax Show Modbus Description Shows the Modbus settings for a line.
54 Modem Commands Modem Commands Add Modem Description Adds a modem. User Level Admin Syntax Options < mod em_name > < initialization_ string > Delete Modem Description Deletes a modem. User Level Admin Syntax Option < config_modem_name > Y ou can see a the list of modems that can be deleted by typing delete modem ? .
55 Packet Forwarding Commands Packet Forwarding Commands Set Packet-Forwarding Line Description The Packet Forwarding feature allows you to control how the data coming from a serial device is packetized before forwarding the packet onto the LA N network.
56 Packet Forwarding Commands custom-on-specific-events This section allows you to set a variety of packet definition options. The first criteria that is met causes the packet to be transmitted.
57 Packet Forwarding Commands Show Packet-Forwarding Line Description Shows the packet-forwarding settings for the line. User Level Admin Syntax force-transmit-timer When the specified amount of time, in milliseconds, elapses after the first character is received from the serial port, th e packet is transmitted.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 58 Network Commands Chapter 5 5 This chapter defines all the CLI commands asso ciated with co nfiguring the IOLAN’ s network parameters. SNMP Commands The IOLAN supports SNMP traps for restar t and SNMP communi ty authentication error .
59 SNMP Commands Delete Community Description Deletes an SNMP community (version 1 and version 2). User Level Admin Syntax Option < config_community_number > When you add an SNMP communi ty , it gets assigned to a number . T o delete the SNMP community , you need to specify the number of the community that you want to delet e.
60 SNMP Commands Set SNMP engine-id-string Description Configures SNMP v3 Engine ID . User Level Admin Syntax Options string Set SNMP inform-timeout Description Configures SNMP inform traps timeout value. User Level Admin Syntax Options number Set SNMP inform-retries Description Configures SNMP i nform traps number of retires.
61 TFTP Commands TFTP Commands Set Server TFTP Description Configures the IOLANs TFTP client settings. User Level Admin Syntax Options retr y timeout Host s Commands Add Host Description Adds a host to the IOLAN .
62 Gateway Commands Show Host s Description Shows the IOLAN host table. User Level Normal, Admin Syntax Gateway Commands Add Gateway Description Adds a gateway .
63 Gateway Commands Set Gateway Description Configures the gateway . User Level Admin Syntax Options < config_gateway_host > Y ou can view the configured gateways that can be d eleted by typing delete gateway ? .
64 Logging Commands Logging Commands Set Syslog Description Configures the system log. User Level Admin Syntax Options level primary-host secondary-host Show Syslog Description Shows the syslog settings.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 65 T ime Commands Chapter 6 6 This chapter defines all the CLI commands a ssociated with configuring the IOLAN’ s time parameters. T ime Commands Set T ime Description Sets the IOLAN’ s system clock.
T ime/Date Setting Command s 66 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Show Date Description Shows the date, according to the IOLAN system clock.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 67 Administration Commands Chapter 7 7 This chapter defines all the CLI commands associ ated with configuring the IOLAN ’ s ad ministration parameters. Bootup Commands Reboot Description Reboots the IOLAN.
68 Bootup Commands Set Bootup Description Specifies remote the TFTP host and pathname for files to be loaded after a IOLAN reboot. User Level Admin Syntax Options firmwar e file configuration file host The host name or IPv4/IPv6 address of the se rver that contains t he configurati on or firmware file.
69 TFTP File T ransfer Commands TFTP File T ransfer Commands Netload Description T ransfers a file from a remote host to the IOLAN using the TFTP protocol. User Level Admin Syntax Options text-config Specify this option i f you are uploading a text-based configuration file to the IOLAN from a TFTP server .
70 Custom Factory Default Net save Description T ransfers a file from the IOLA N to a remote host using the TFTP protocol. User Level Admin Syntax Options configurat ion Specifies that you are going to upload a co nfiguration file from the IOLAN to the specified host or IP address.
71 MOTD Commands Set Description Sets the current configuration on IOLAN to act as the factory default configuration. See the User Guide for dir ections on ho w to rever t b ack to the original facto ry default configuration, if required.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 72 S t atistic Commands Chapter 8 8 This chapter defines all the CLI commands asso ciated with co nfiguring the IOLAN’ s statistic parameters. Configuration S t atistics Show Net stat Description Shows currently used TCP/UDP sockets/ports.
Run-T i me S tatistics 73 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Show Net st at S tatistics Description Shows protocol (IP/IC MP/TCP/UDP) counters. User Level Admin Syntax Show Routes Description Shows current information about IPv4 or IPv6 network routes.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 74 I/O Commands Chapter 9 9 This chapter defines all the CLI commands associat ed with configuring the IOLAN’ s I/O parameters. Global I/O Commands Set IO UDP Description Sets the UDP settings fo r I/O unicast messages.
Set Line 75 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IO Failsafe Description Sets the failsafe (watchdog) settings for I/O. User Level Admin Syntax Options mode timeout Set IO Modbus Descr.
76 Set IOChannel Set IOChannel Set IOChannel Mode Description Sets general I/O channel set tings for the sp ecified channel, these settings are available to all channels and I/O serial pins. User Level Admin Syntax Options i/o_channel Specify the channel number , for example, d2 or a4.
Set IOChannel 77 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IOChannel Digit al Input (Serial Pins) trigger When the trigger con dition is met, tr iggers the specified alarm action. T riggers can be: z Disabled —No alarm settings. This is the default.
78 Set IOChannel Set IOChannel Digit al Output trigger When the trigger con dition is met, tr iggers the specified alarm action. T riggers can be: z Disabled —No alarm settings. This is the default. z Inactive —When the expected Digital input is active, going inactiv e will trigger an alarm.
Set IOChannel 79 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 type Specify the type of digital output: z Sink —Specifies that the channel will be grounded when active.
80 Set IOChannel Set IOChannel Digit al Output (Serial Pins) Description Sets the Digital output for serial pins R TS and DTR. This option is only availa ble when the Line Service is set to Signal I/O .
Set IOChannel 81 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IOChannel Analog (T rue Analog) active-to-inactive-delay When the I/O is commanded to an inactive state, this is the len gth of the delay b efore the command is executed. V alid values are 1-9999 x 10 0 ms.
82 Set IOChannel alarm Configures alarm settings when the Analog input trigger is activated. level Y ou can specify up to five alarm tr igger/clear severity levels.
Set IOChannel 83 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IOChannel Analog (T emperature) Description Sets the Analog input channel se ttin gs for T emperature models .
84 Set IOChannel level Y ou can specify up to five alarm tr igger/clear severity levels. If the Tr i g g e r Ty p e is Low , an alarm is triggered when th e input drops below the specified T rigger value; other severity level trigger va lues must decrease in value with each subsequent level.
Set IOChannel 85 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IOChannel IOExtension Description Configures the I/O extension options that allo w you to connect the Digital Input channel or inp.
86 Set IOChannel connection-method The connection-metho d is one of the following: z Client-Initiated —When specified, the channel/seri al signal pin will wait for connections to be initiated by an othe r I/O channel or a TCP/IP application.
Set IOChannel 87 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 Set IOChannel Multihost Description Configures up to 49 hosts/IOLANs that the Di g ital input channel or input serial signal pins (DSR, DCD, or CTS-when the line is configured for signal -io) will connect to.
88 Set IOChannel Show IO Description Shows global I/O information (for example, UDP , TruePort, Modbus). T emperature input is Analog. User Level Admin Syntax Options i/o_channel Specify the channel number , for example, d2 or a4. T emperature models use Analog input, so the channel numbers are a1-a4.
I/O Channel Control Commands 89 IOLAN DS1/TS2 CLI Reference Guide, V e rsion 4.3 I/O Channel Control Commands The I/O commands in this section are used to manual ly manage the I/O channels. Digit al Output Description Manages the Digital output channel status.
IOLAN DS1/TS2 CLI Referenc e Guide, V ersion 4.3 90 Glossary This chapter provides definitions for IOLAN terms. BOOTP (BOOT strap Protocol) An Internet protocol that enables a diskless workstation to discover its own IP address, the IP address of a BOOTP server on the network, and a file to be loaded into memory to boot the machine.
Een belangrijk punt na aankoop van elk apparaat Perle Systems 5500208-43 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Perle Systems 5500208-43 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Perle Systems 5500208-43 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Perle Systems 5500208-43 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Perle Systems 5500208-43 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Perle Systems 5500208-43 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Perle Systems 5500208-43 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Perle Systems 5500208-43 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
