Gebruiksaanwijzing /service van het product CS-228 van de fabrikant ATEN Technology
Ga naar pagina of 41
2 Console / 8 Port KVM Switch CS-228 User Manual www.aten.com.
CS-228 User Manual ii FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which cas e the user may be required to tak e adequate measures. This equipment has been test ed and found to comply with the limit s for a Class A digital device, pursuant to Part 15 of the FCC Rules.
CS-228 User Manual iii User Information Online Registration Be sure to register your product at our online support center: International – http :/ /supp ort.
CS-228 User Manual iv Package Content s The basic CS-228 package consists of: 1 CS-228 KVM Switch with Stacking Pads 1 Power Adapter 1 Rack Mount Kit 1 User Manual* Check to make sure that all the comp onents are present and that nothing got damaged in shipping .
CS-228 User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CS-228 User Manual vi 4. OSD Operation OSD Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 OSD Main Menu Headings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Port Numbering .
CS-228 User Manual vii About this Manual This User Manual is provided to help you get the most from your c/c system. It covers all aspects of installation, configurati on and op erati on. An overview of the information fou nd in th e manual is provided below.
CS-228 User Manual viii Conventions This manual uses the following conven tio ns: Product Information For information abo ut all ATEN produ cts and how they can help you connect without limits, vi si t ATEN on the Web or co ntact an ATEN Authorized Reseller.
1 Chapter 1 Introduction Overview The CS-228 KVM Switch is a control unit that allows two indepen dent keyboard, mouse, and moni tor Consoles to access eight computers, either independently or on a multiuser shared ba sis, in a convenient, cost effective manner.
CS-228 User Manual 2 Features 2 Consoles Control 8 Computers One or T wo Users Can Operate Up T o 64 Computers (via cascade to CS-138A, CS-9138, CS-128A, or CS-1 24A) At The Same Time Each.
1. Introduction 3 Requirement s Console A VGA, SVGA, or multisync monitor capable of the highest resolution that you will be using on any com puter in the in stallation. If a monitor switches to a computer us ing a resolution that is hig her th an the resolution that the monito r can support, serious damage to the mo nitor may result.
CS-228 User Manual 4 Cables Use of substandard cables may damage the connected devices or degrade overall performance. For optim um sign al integrity and to simplify the layou t, we strongly recom mend that you use the follo wing high quality Custom Cable sets: Note: 1.
1. Introduction 5 Component s Front Panel No. Component Description 1 Port LEDs An On Line LED lights ORANGE to indicate that the computer attached to its corresponding port is up and running. If the LED is flashing, it indicates that the Port is being used for Cascading to another switch.
CS-228 User Manual 6 Rear Panel No. Component Description 1 Power Switch This is a st andard rocker switch that powers the un it On and Off. 2 Power Jack The power adapater cable plugs in here. 3 Console 2 KVM Section The microphone, speakers, monitor , keyboard and mouse that belong to Console 2 plug in here.
7 Chapter 2 Hardware Setup S t acking and Mounting The CS-228 can be placed on the desktop or it can be rack mounted, as described in the sections that fo llo w. St acking The unit comes with the stacking brackets already attached. No te that there is a top and bottom half to each bracket.
CS-228 User Manual 8 Rack Mounting The CS-228 can be mounted in a 1U syst em rack. To rack mount the unit, do the following: 1. Remove the stacking brackets by unsc rewing them from the unit, as shown in the diagram below: 2.
2. Hardware Setup 9 Single St ation Installation The most basic installation is a Single Stage installati on, in which no additional Master Views are cascaded down from the first unit. To set up a single stage installation, refer to the installation diagram on the fo llo wing page as you perform these steps: 1.
CS-228 User Manual 10 (Continued from previous page.) 6. Plug in the power cords and power On all the computers. Note: Y ou must turn on the power to the CS-228 before turning on the power to the comp uters.
2. Hardware Setup 11 T wo St age Installation To control even more computers, up to eight additional switches can be cascaded from the KVM ports of the CS-228. The cascaded switches that connect back to the First Stage unit (the CS-228 ), are considered Second Stage units.
CS-228 User Manual 12 T wo St age Installation Diagram 1 2 3 4 5 6 7 8.
13 Chapter 3 Basic Operation Hot Plugging The CS-228 supports hot plugging – co mponen ts can be removed and added back into the installation by unpluggi ng their cables from the KVM ports without the need to shut the unit down. In order for hot pluggi ng to wo rk properly, however, these pro cedures must be followed: 1.
CS-228 User Manual 14 Port Selection Instant access to any computer on the in stallation is provided by the m enu driven On Screen Display (OSD) function.
15 Chapter 4 OSD Operation OSD Overview The On Screen Display (OSD), provides a menu driven interface to handle the computer switching procedur e. All operations start from the OSD Main Menu. To activate the Main Menu, tap either [Ctrl] key twice. Note: 1.
CS-228 User Manual 16 OSD Main Menu Headings Port Numbering Each computer on the installation is assigned a unique Port Number (PN). The PN is a one or two segment number that is determined by the Stage Level and KVM port of the KVM switch that the co mputer is connected to.
4. OSD Operation 17 OSD Navigation T o dismiss the menu, and d eactivate the OSD, Click the X at the upper right corner of the OSD W indow; or press [Esc] . T o move up or down through the list one line at a time, Click the Up and Down T riangle symbols ( ST ) or use the Up and Down Arrow Keys.
CS-228 User Manual 18 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can: rapidly switch to any port; scan selected ports only; limit the list you wish to view; designate a port for Quick View scanning; create or edit a port name; or make OSD setting adjustments.
4. OSD Operation 19 F3: LIST This function le ts you broaden or narr ow the scope of which ports th e OSD lists. This will be different for each Console, depending on the choices made for that Console. The choices and their meanings are given in the table, below: Double-click the choice you want, or move the Highlight Bar to it then press [Enter] .
CS-228 User Manual 20 F4: SCAN Clicking the F4 field, or pressing [F4] ini tiates Scan Mode , in which the OSD cycles through all the ports that have been selected for scanning with the Scan Mode setting (see SCAN MODE , page 23). Wh en you want to stop at a particular location, press the [Spacebar] to stop scanning.
4. OSD Operation 21 F5: ADM F5 allows an Admini strator to configure th e OSD operation of the C onsole. To change a setting double-click it; or use the up and down arrow keys to move the highlight bar to it then press [Enter] . After you select an item, a submenu with further choices for you to select from appears.
CS-228 User Manual 22 F6: Set [F6] allows you to configure the OSD settings for the Console you are working at. To change a setting: 1. Double-click it; or move the highlight bar to it , then press [Enter] 2. P ress [Esc] to activate it. After you select an item, a submenu with further choices appears.
4. OSD Operation 23 (Continued from previous page.) Setting Function SCAN MODE Selects which Ports are av ailable for scanning. There are six choices: ALL - All the Ports which have been set Acces.
CS-228 User Manual 24 F7: QV You can broaden or narrow the number of ports that get automati cally scanned by selecting only the ones you want wi th the QV (Quick View Scan) function. [F7] is a toggle that selects or deselects the currently highligh ted port for the Quick View Scan ning function (see F4, above).
25 Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the dev ice. Do not place the device on any unstable su rf ace (cart, stand, table, etc.
CS-228 User Manual 26 T o help protect y our system from sudden, transient increases and decreases in electrical power , use a su rge suppressor , line conditioner , or un-interruptible power supply (U PS). Position system cables and power cable s carefully; Be sure that nothing rests on any cables.
Appendix 27 Rack Mounting Before working on the rack, ma ke su re that the stabilizer s are secured to the rack, extended to the floor , and that the full w eight of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.
CS-228 User Manual 28 T echnical Support International North America When you contact u s, please have the followin g information ready beforehand: Product model number, serial number , and date of purchase. Y our computer configuration, incl udin g operating system, revision level, expansion cards, and software.
Appendix 29 Specifications Function S pecification Computer Connections Direct 8 Max 64 (via Cascade) Port Selection OSD (On Screen Display) Connectors External Console Ports Keyboard 2 x 6-pin Mini D.
CS-228 User Manual 30 Master View - Com puter Connection T ables Switches Ty p e Co mputers 1 CS-228 1 - 8 2 CS-128A / CS-138A / CS-9138 8 - 15 3 CS-128A / CS-138A / CS-9138 15 - 22 4 CS-128A / CS-138.
Appendix 31 OSD Factory Default Settings Setting Default MUL TIUSER MODE Enabled ACCESS TIMEOUT 2 Seconds OSD HOTKEY [Ctrl] [Ctrl] DISPLA Y MODE The Port Number plus the Port Name DISPLA Y DURA TION 3.
CS-228 User Manual 32 T roubleshooting Symptom Possible Cause Action Keyboard and/or Mouse not responding. The connection f rom the selected port to the targ et comput er has been broken, or the compute r is turned OFF . Check the Online LED for the selected port.
33 Index C Cables, 4 Components Front Panel, 5 Rear Panel, 6 Connection Tables, 30 F Factory Default Settings, 31 Features, 2 H Hot Plugging, 13 I Installation Cascaded, 11 Single Station, 9 L Limited.
Een belangrijk punt na aankoop van elk apparaat ATEN Technology CS-228 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ATEN Technology CS-228 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ATEN Technology CS-228 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ATEN Technology CS-228 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ATEN Technology CS-228 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ATEN Technology CS-228 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ATEN Technology CS-228 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ATEN Technology CS-228 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
