Gebruiksaanwijzing /service van het product AVIC-F160 van de fabrikant Pioneer
Ga naar pagina of 76
Black plate (1,1) Owner ’ s Manual HIDE-A W A Y NA VIGA TION SYSTEM FOR TR UCKS/CAMPER V ANS A VIC-F160 HIDE-A W A Y NA VIGA TION SYSTEM A VIC-F260 For details on softwa re updates, visit www.
Black plate (2,1) <127075005641>2 Engb 2.
Black plate (3,1) Thank you for buying this P ioneer product. Please read through these instructions so you will know how to operate your model properly . A fter you have finished reading the instructio ns, keep this document in a safe place for future refer ence.
Black plate (4,1) – Searching for POIs using preset categories 31 Searching for POIs by categories 31 Searching for a POI directly from the name of the facilities 33 Searching for a nearby POI 34 Se.
Black plate (5,1) Other operations More menu 63 Installation Important safeguards 64 P recautions before connect ing the system 64 Before installing this product 65 T o prevent damage 65 P recautions .
Black plate (6,1) Certain country and government laws may pro- hibit or restrict the placement and use of this system in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of your naviga- tion system.
Black plate (7,1) Licence agr eement PIONEER A VIC-F160, A VIC-F260 THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP . (JAP AN) ( “ PIONEER ” ). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULL Y BEFORE USING THE SOF TWARE INST ALLED ON THE PIONEER PRODUCTS.
Black plate (8,1) 3 LIMIT A TION OF LIABILITY IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CL AIM OR LOSS IN- CURRED BY YOU (INCL UDING, WITHOUT LIM- IT A TION, COMPENSA TORY , INCIDENT AL, IN.
Black plate (9,1) END USER LICENSE AGREEMENT PLEASE READ THIS END USER LICENSE AGREEMENT CAREFUL BEFORE USING THE HERE DA T ABASE NOTICE TO THE USER T HIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT FOR SALE - BETWEEN YOU AND HERE B.
Black plate (10,1) <127075005641>10 Engb 10 Chapter 02 Introduction.
Black plate (11,1) About the data for the map database ! Modifications relate d to roads, streets/high- ways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably , those modifications af ter that period are not reflected in this database.
Black plate (12,1) CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only infor- mation about traffic regulations applicable at the time when the route was calculated is consid- ered.
Black plate (13,1) ! Never use headphones while driving. Fuel cost management These calculations are based only on the infor- mation that you provide and not on any data from the vehicle. The fuel mileage displayed is only a reference value, and does not guarantee the fuel mileage displayed can be obtained.
Black plate (14,1) ! If data loss or corruption occurs on the sto- rage device for any reason, it is usually not possible to recover the data. P ioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. ! Never insert or eject an SD memory card while driving.
Black plate (15,1) 1 Insert an SD memory card into the SD card slot. 2 Gently press the card in against the spring latch until it stops, then release. The card will lock firmly into place inside the SD card slot. Resetting the microprocessor CAUTION Please refer to the related section before clearing.
Black plate (16,1) On first-time startup When you use the navigation system for the first time, an initial setup process starts auto- matically . Follow the steps below . 1 Start the engine to boot up the system. 2 Wait approx imately 10 seconds, and then press the MODE button of the A V re- ceiver .
Black plate (17,1) 9 If needed, modify the default route planning options, then touch [Next]. p Later you can change them in “ Route Set- tings ” . = F or details, refer to Modifying the route cal- culation conditions on page 41. p Y ou can restart the configuration wizard later from the “ Settings ” menu.
Black plate (18,1) Screen switching overview Navigation screen Press the MODE button of the AV receiver . AV receiver screen (e.g. AVH-X2600BT) <127075005641>18 Engb 18 Chapter 04 How to use the.
Black plate (19,1) What you can do on each menu 1 Map screen T ouch [ Show Map ] on the “ Navigation Menu ” screen . 2 Quick menu Registering your favourite menu items in shortcuts allows you to quickly jump to the re- gistered menu screen by a simple touch on the quick menu screen.
Black plate (20,1) p When entering text, the first character appears in upper case while the rest of the text is in lower case. T ouch to enter an upper case letter or touch twice to turn on Caps Lock. T ouch again and lower case letters return. 3 Back The previous screen returns.
Black plate (21,1) Most of the informati on provided by your navigation system can be seen on the map. Y ou need to be- come familiar with how informati on appears on the map. How to read the map scr een 1 7 8 2 3 4 6 9 5 a b p Information with an asterisk (*) appears only when the route is set.
Black plate (22,1) T ouching this field displays route information during navigation. By default, only one data field is displayed . T ouch this field to see all data fields. = For details, refer to Browsing the data field on page 24. 9 Current route* The route currently set is highlighted in colour on the map.
Black plate (23,1) 2 T ouch [Show Map] on the “ Navigation Menu ” screen. The map screen appears showing the current position (a blue arrow by default), recom- mended route (an orange line) and surround- ing map area. p The arrow mark appears in blue by default.
Black plate (24,1) Browsing the data field The data fields are different when you are navi- gating the current route and when you have no specified destination (the orange line is not displayed).
Black plate (25,1) An icon showing a petrol station or a restau- rant will appear on the map during you are driving on motor ways. T ouch the icon to open the details of the next few exits or ser vice sta- tions. Motorway exit services p Y ou can add any of them as a waypoint to your route.
Black plate (26,1) p The map orientation is fixed at “ Heading up ” when the 3D map screen is displayed. 1 Display the map screen. = F or details of the operations, refer to Screen switching over view on page 18. 2 T ouch anywhere on the map during na- vigation.
Black plate (27,1) Scrolling the map to the position you want to see 1 Display the map screen. = F or details of the operations, refer to Screen switching over view on page 18.
Black plate (28,1) p Some information regarding traffic regula- tions depends on the time when the route calculation is per formed. Thus, the infor- mation may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question.
Black plate (29,1) Searching for a location by entering the midpoint of a street Y ou can also navigate to the midpoint of a street if the house number is not available. 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 18.
Black plate (30,1) 4 T ouch [T own] and enter the name of the city/town using its postcode. p T o open the numeric keypad, touch . 5 T ouch [Street] and enter the stree t name on the keyboard. 6 T ouch [House Number] and enter the house number on the keyboard.
Black plate (31,1) The list of places opens with names contain- ing the entered character sequence. 5 Scroll the list and touch the place you want. A full screen map appears with the selected point in the middle. The name and address of the place is displayed at the top of the screen.
Black plate (32,1) 2 T ouch [Find], then [Find Places]. 3 T ouch [Custom Search]. 4 Select the area around which the POIs should be searched for . ! In a T own : Searches for a place within a selected city/ town. (The result list will be ordered by the distance from the centre of the selected city/town.
Black plate (33,1) 8 T ouch the POI you want. The searched location appears on the map screen. = F or subsequent operations, refer to Setting a route to your destinatio n on page 38. Searching for a POI directly from the name of the facilities Y ou can search for POIs by their names.
Black plate (34,1) 8 Using the keyboard, start entering the name of the place. 9 After entering a few letters, touch [Re- sults]. The screen appears showing the list of places with names containing the entered character sequence. 10 T ouch the POI you want.
Black plate (35,1) 4 Move and scale the map to locate your destination. 5 T ouch [Select]. The selected location appears on the map screen. = F or details, refer to Setting a route to your destination on page 38. p Y ou can also select a map location as the destination by scrolling the map.
Black plate (36,1) Selecting a location you searched for recently The places that you set as destinations or way- points previously are automatically stored in “ History ” . Smart History T wo of the most recently set destinations are shown in the “ History ” field for easier access.
Black plate (37,1) 5 When finished, touch [Done]. The searched location appears on the map screen. = F or subsequent operations, refer to Setting a route to your destinatio n on page 38. Searching for a location by scrolling the map Specifying a location after scrolling the map enables you to set the position as destination, waypoint.
Black plate (38,1) Setting a route to your destination Y ou can set a route to your destination by using either a searched location or the “ My Route ” menu. Setting a route using a searched location 1 Search for a location. = F or details, refer to Searching for and select- ing a location on page 28.
Black plate (39,1) 5 T ouch any of the alternatives to see it on the map. If you cannot find a good alternative, touch [ More Results ] and scroll down for routes with different routing methods. 6 Select one of the alter natives and touch [Back]. The previous screen returns.
Black plate (40,1) 6 T ouch [Go] to confirm the destination. After a short summary of the route para- meters, the map appears showing the entire route. The route is automatically calculated. p If you have already set the route to the desti- nation, [ Next ] will appears.
Black plate (41,1) Displaying the route overview 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 18. 2 T ouch [My Route] on the “ Navigation Menu ” screen.
Black plate (42,1) 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 18. 2 T ouch [More...], then [Settings]. 3 T ouch [Route Settings]. 4 T ouch [V ehicle], then touch the vehicle type you use.
Black plate (43,1) 5 T ouch next to the vehicle pro file that you want to modify . 6 Scroll the list and touch any of the lines to change the parameters. p Items marked with an asterisk (*) do not ap- pear when the vehicle type is set to “ De- fault Lorry ” .
Black plate (44,1) Setting the route calculation These settings determine how routes will be calculated. Select the type of vehicle you are driving, the road types used in route planning, and the route planning method. 1 T ouch [Menu] on the map screen.
Black plate (45,1) 4 T ouch any of the listed road types. If needed, scroll the list for all road types. The following options can be set for route calcula- tion: p Items marked with an asterisk (*) do not ap- pear when the vehicle type is set to “ De- fault Lorry ” .
Black plate (46,1) 5 When finished, touch and hold [Back]. The map screen returns. Setting driving time alerts p This function is only available on A VIC - F160. Y ou can set countdown timers to alert you when you need a break or a sleep. This feature can be set for one driver or two alternative dri- vers.
Black plate (47,1) Selecting a new destination when a route is alr eady set If you alrea dy have a recommended route and you select a new destination, the navigation system will ask you whether to start a new route, add a new waypoint to the route or ap- pend the newly selected destination at the end of the current route.
Black plate (48,1) 6 Select the start point of the rou te the same way as you select a destination. 7 T ouch [Set Start]. 8 Select [Go] when the new start point is set. The map screen returns with a transparent arrow mark (showing that there is no GPS re- ception).
Black plate (49,1) Checking route alter natives for the current route T o recalculate the current route with a differ- ent route planning method, you can modify the settings for the route calculation (refer to Checking and modif ying the current r oute on page 41).
Black plate (50,1) 4 Scroll down the list and touch [Simulate Navigation]. The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.
Black plate (51,1) Storing a location in “ Favourites ” Storing your favourite locations as “ Favour - ites ” provides you with the opportunity to save the time and effort of re-entering this informa- tion.
Black plate (52,1) 9 Set the necessary parameters. ! T ype of Alert : Set the type of alert point. ! Direction of Alert : Set the direction from which you expect the alert. ! Speed Limit : Set the speed limit for this alert point (if ap- plicable). 10 T ouch [Save].
Black plate (53,1) ! If you want to use the T raffic information function in R ussia, access www .naviextras.co m beforehand and activate the ser vice.
Black plate (54,1) p When the traffic data is available, a 2D map is displayed with road segments coloured by the severity of traffic incidents. T ouch the event type icon at the road segment and then touch to get information about the traffic incident.
Black plate (55,1) Displaying the settings screen 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 18. 2 T ouch [More...]. 3 T ouch [Settings].
Black plate (56,1) The maximum speed set in the vehicle pro - file is also used for this warning. This sys- tem alerts you if you exceed the preset value even if the legal speed limit is higher . This setting lets you decide whether you wish to receive visible and/or audible warn- ings.
Black plate (57,1) T ouching this key lets you bypass parts of the recommended route. ! Cancel Route : Cancels the route and stops navigation. The key is replaced with the next one if way- points are given . ! Remove Next W aypoint : Skips the next waypoint from the route.
Black plate (58,1) Y ou can also set the minimum delay that triggers route recalculati on, and you can in- struct the application if you want to confirm every recalculation. ! Event T ypes : T ouch this key to open the list of traffic event types, and select which events to take into account in route calculation.
Black plate (59,1) Show or suppress the 3D elevation of the surrounding terrain . ! T rack Logs : T urn on or off track log saving, that is, sav- ing the sequence of the locations your jour- neys go through. ! Place Markers : Select which places to show on the map while navigating.
Black plate (60,1) If you are approaching a motorway exit or a complex intersection and the needed infor- mation exists, the map is replaced with a 3D view of the junction. Y ou can turn this feature on or let the map be displayed for the whole route.
Black plate (61,1) Customising the regional settings These settings allow you to customise this sys- tem for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. 1 Display the settings screen.
Black plate (62,1) 3 Select the language that you want to use for voice guidance messages, then touch [Next]. p Later you can change it in “ Sound and W arnings ” settings. = F or details, refer to Setting the volume and the guidance voice for navigation system on page 55.
Black plate (63,1) More menu The “ More... ” menu provides you with various options and additional applications. 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 18.
Black plate (64,1) Important safeguards WARNING Pioneer does not recommend that you install your navigation system yourself . This pr o- duct is designed for professional installati on only .
Black plate (65,1) Before installing this product ! Use this unit with a 12-volt batter y and ne- gative earthing only. F ailure to do so may result in a fire or malfunction. ! T o avoid shorts in the electrical system, be sure to disconnect the ( – ) batter y cable be- fore installation.
Black plate (66,1) Precautions before installation CAUTION ! Never install this product in places where, or in a manner that: ! Could injur e the driver or passengers if the vehicle stops suddenly .
Black plate (67,1) Connecting the syste m FUSE Secure the RGB cable with the 11 mm (.4 in) screw The navigation unit Where applicable, secure the cable to the AV receiver using an 11 mm (.4 in) screw (supplied). Insert one end of the RGB cable into the “DA T A BUS” slot on the side of this product and secure it with an 11 mm (.
Black plate (68,1) Installing with the hook and loop fastener 1 Thoroughly wipe off both surfaces be- fore affixing the hook and loop fastener . 2 Peel off the protective sheet and attach the hook and loop fastener . Navigation unit Protective sheet 3 Decide on the installation position.
Black plate (69,1) Positioning technology Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio sig- nals giving time and position information.
Black plate (70,1) ! If you make a slight turn. ! If there is a parallel road. ! If there is another road ver y nearby , such as in the case of an elevated motorway . ! If you take a recently opened road that is not on the map. ! If you drive in zigzags.
Black plate (71,1) ! If you enter or exit a multi-storey car park or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If trees or other obstacles block the GPS signals for a considerable period.
Black plate (72,1) ! If the destination is too far , there may be in- stances where the route cannot be set. (If you want to set a long-distance route going across several areas, set waypoints along the way .) ! During voice guidance, turns and intersec- tions from the motor way are announced.
Black plate (73,1) Display information Page Find Find Address 28 Find Places 30, 31 Find on Map 34 Favourites 35 History 36 Coordinate 36 My Route Create Route 39 Edit Route 47, 48 Overview 41 Avoidances 41 Cancel Route 48 More.
Black plate (74,1) Glossary Current location The present location of your vehicle; your cur- rent location is shown on the map by a blue triangle mark (default).
Black plate (75,1) Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Earthing system ....................... Negative type Maximum current consumption ...................................
Black plate (76,1) PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagaw a 212-0031, JA P AN PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS (USA ) INC. P . O . Bo x 1540, Long Beach, Calif ornia 90801-1540, U .
Een belangrijk punt na aankoop van elk apparaat Pioneer AVIC-F160 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer AVIC-F160 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer AVIC-F160 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer AVIC-F160 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer AVIC-F160 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer AVIC-F160 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer AVIC-F160 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer AVIC-F160 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
