Gebruiksaanwijzing /service van het product DJM-800 van de fabrikant Pioneer
Ga naar pagina of 24
Operating Instructions DJ MIXER DJM-800.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components.
4 FEATURES CONTENTS CONFIRM ACCESSORIES 1 Designed for high sound quality Analog signals are transmitted by the shortest circuitry and converted to digital format at 96 kHz sampling rate via a 24-bit high quality A/D converter. As a result, signals are passed to the digital mixing stage in the best possible state.
5 CONNECTION PANEL 1. POWER switch 2. MASTER 2 output connectors RCA type unbalanced output. 3. Recording output connectors (REC) RCA type output connectors for recording. 4. PHONO input connectors RCA type phono level (MM cartridge) input connectors.
6 POWER MASTER 2 REC RL R (TRS) L MASTER 1 L R PHONO CONTROL DIGIT AL MIC SIGNAL CUT ADD SIGNAL GND SIGNAL GND LINE DIGIT AL LINE DIGIT AL CD DIGIT AL CD LINE L R AC IN OFF ON 1GND 3COLD MASTER A TT 2.
7 POWER MASTER 2 REC RL R (TRS) L MASTER 1 L R PHONO CONTROL DIGIT AL MIC SIGNAL CUT ADD SIGNAL GND SIGNAL GND LINE DIGIT AL LINE DIGIT AL CD DIGIT AL CD LINE L R AC IN OFF ON 1GND 3COLD MASTER A TT 2.
8 CONNECTING MICROPHONE AND HEADPHONES Microphone The MIC 1 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.3 mm phone plug or XLR plug. The MIC 2 jack on the upper surface of the operating panel can be used to connect a microphone with Ø6.
9 OPERATION PANEL Microphone input control section 1. Microphone 1 input jack (MIC 1) Use to connect a microphone with an XLR or phone plug. 2. Microphone 2 input jack (MIC 2) Use to connect a microphone with a phone plug. 3. Microphone 1 level control dial (MIC 1 LEVEL) Use to adjust the volume of microphone 1.
10 11. TRIM adjust dial Use to adjust the input level for each channel. (adjustable range: – ∞ to +9 dB, mid-position is about 0 dB) 12. Channel equalizer high-range adjust dial (HI) Use to adjust the treble (high-range) frequency sound for each channel.
11 30. Headphones level adjust dial (LEVEL) Adjusts the output level of the headphones jack. (adjustable range: – ∞ to 0 dB) 31. Headphones jack (PHONES) BPM counter section 32. Beat select buttons ( 2 BEAT 3 ) 3 (Beat up): Doubles the calculated BPM.
12 DISPLAY SECTION EFFECT SELECT CH SELECT P ARAMETER 1 2 3 4 MIC MST AUTO MIDI T AP BPM % A B 1 2 3 4 1. Effects display section The < EFFECT SELECT > indicator lights constantly, and the alpha-numeric display (seven characters in two lines) indicates the name of the effect as shown below.
13 BASIC OPERATIONS MIXER OPERATIONS 2 1 8 7 3 4 5 6 PO WER TRIM HI, MID, LO W BALANCE MASTER LEVEL 1. Set rear panel POWER switch to ON. 2. Set the input selector switch for the desired channel to choose the connected component.
14 7 Use the CROSS FADER curve switch to select the cross fader curve response. ¶ At the left setting, the curve produces a rapid signal rise. (As soon as the cross fader lever leaves the [ A ] side, the [ B ] channel sound is produced.
15 EFFECT FUNCTIONS This unit can produce beat effects linked to the BPM, and sound-color effects linked to the COLOR dials provided for each channel, for a total of 18 basic effects (including [ SND/RTN ]). In addition, by changing the parameters for each kind of effect, an extremely wide range of effect variations can be produced.
16 6. FILTER In units of 1/4, 1/2, 1/1, 2/1, 4/1, 8/1, 16/1, 32/1, or 64/1 beat, the filter frequency is moved, greatly changing the sound coloration. Example 1 cycle = 1/4, 1/2, 1/1, 2/1, 4/1, 8/1, 16/1, 32/1, or 64/1 beat Frequency 7.
17 PRODUCING BEAT EFFECTS EFFECT SELECT CH SELECT P ARAMETER 1 2 3 4 MIC MST AUTO MIDI TA P BPM % AB 1 4 2 3 5 TA P AUTO/T AP ON/OFF TIME LEVEL/DEPTH BEA T 2 , 3 Display example Effect Name: DELAY Eff.
18 TYPE OF SOUND-COLOR EFFECT 1. HARMONIC Detects deviation of the input sound from absolute pitch and automatically compensates to the nearest key. By rotating the dial, the pitch/key can be adjusted within a range of ±6 half-tones. COLOR HI LOW Input sound 3.
19 EFFECT PARAMETERS Beat Effect (*1) Sound-color effects Name 1 HARMONIC 2 SWEEP 3 CRUSH 4 FILTER Parameter (COLOR dial) Sets amount of pitch shift in range of ±6 half-tones. Rotating dial to right increases pitch shift by +6 half-tones, while rotating to the left reduces pitch shift by – 6 half-tones.
20 MIDI SETTINGS MIDI is an acronym for “ Musical Instrument Digital Interface ” and refers to a protocol developed for the exchange of data between electronic instruments and computers. A MIDI cable is used to connect components equipped with MIDI connectors to enable the transmission and receipt of data.
21 MIDI SETTINGS PROGRAM CHANGE SNAPSHOT Once the DJM-800 is setup with parameters for a given purpose, that set of parameters can be recorded as a snapshot. When snapshot of the current status is recorded, all messages for control change and program change are transmitted.
22 TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below . Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use.
23 SPECIFICATIONS 1. General Power source .............................................................. AC 120 V, 60 Hz Power consumption ..................................................................... 32 W Operating temperature ...............
24 Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.
Een belangrijk punt na aankoop van elk apparaat Pioneer DJM-800 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer DJM-800 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer DJM-800 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer DJM-800 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer DJM-800 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer DJM-800 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer DJM-800 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer DJM-800 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
