Gebruiksaanwijzing /service van het product VSX-D309 van de fabrikant Pioneer
Ga naar pagina of 48
Operating Instructions AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-D309.
2 Congratulations on buying this fine Pioneer product. Please read through these operating instructions so you will know how to operate your model properly . After you have finished reading the instructions, put them away in a safe place for future reference.
3 READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference. HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to.
4 DTS* (Digital Theater Systems) decoder equipped R DTS is a digital sound system introduced in theaters. Playback of DVD, LD, and CD recorded in DTS audio creates the environment of a theater or the sensation of a concert hall in your home.
5 T able of Contents Set up Operation Features ................................................................. 4 Introductory Information ..................................... 6 Checking the Supplied Accessories .....................................
6 Introductory Information Remote control unit AM loop antenna FM wire antenna AA size IEC R6P batteries (x2) Using this Manual The following symbols are used throughout this manual: Provides detailed precautions and advice on operations, etc. Indicates that display is blinking.
7 Set up Introductory Information Operating range of remote control unit 30 30 23ft (7m) 1 2 3 4 5 6 + + - - The remote control may not work properly if: ¶ There are obstacles between the remote control and the receiver's remote sensor . ¶ Direct sunlight or fluorescent light is shining onto the remote sensor .
8 Connecting Y our System FM wire antenna Connect the FM wire antenna and fully extend vertically along a window frame or other suitable area, etc. 7 T o improve FM reception Connect an external FM antenna.
9 Set up Connecting Y our System CD player Cassette deck , CD-R MD, DA T etc. FM UNBAL 75 Ω L RL R AM LOOP ANTENNA FM ANTENNA CD OUT CD-R /TAPE /MD IN IN IN IN IN IN IN IN OUT CONTROL SURROUND CENTE.
10 Connecting Y our System FM UNBAL 75 Ω L RL R AM LOOP ANTENNA FM ANTENNA CD OUT CD-R /TAPE /MD IN IN IN IN IN IN IN IN OUT CONTROL SURROUND CENTER SUB WOOFER PREOUT TO MONITOR TV VCR/ DVR VIDEO TV.
11 Set up Connecting Digital Components You can connect your audio and video equipment that have digital outputs by either digital or analog hook ups (you don't need to do both). In order to use DVDs with Dolby Digital/DTS soundtracks you need to make either digital audio connections or 5.
12 Speaker terminals Use good quality speaker wire to connect the speakers to the receiver. 1 T wist around 1/2 inch of bare wire strands together . 2 Unclip the speaker terminal and insert the wire.
13 Set up Hints on speaker placement Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best. Some should be placed near a wall; others should be placed away from walls.
14 Preparations memo 1 MUL TI CONTROL DVD/LD TV/SA T VCR/DVR CD LOUDNESS FUNCTION MUTING RECEIVER D.A CCESS CHANNEL AT T VOL MENU TOP MENU VOL CH 2 DSP MODE MIDNIGHT 5.
15 Set up Preparations memo SPEAKER (Front, Center, Surround) setting mode This setting establishes the size and configuration of the speaker system you have connected. So, for example, here you set whether you have connected surround speakers or not, and how big they are.
16 Preparations SUB WOOFER ON/PLUS/OFF setting mode Sets whether the SUB WOOFER is used or not. Also, when used you have the option to use the “PLUS” setting. • Initial setting is “ON”. • Setting the front speaker size to “Small” in the SPEAKER setting mode automatically locks the sub woofer in the “ON” position.
17 Set up Preparations Low cut filter ON/OFF setting mode Turn the low cut filter ON when distorted sound is output through the sub woofer. • Initial setting is “OFF”. • If the SUB WOOFER is set to “OFF” in the SUB WOOFER ON/OFF setting mode, the low cut filter cannot be set.
18 Preparations Dynamic range control setting mode Dynamic range is the difference between the loudest and softest sounds in any given signal. The dynamic range control helps you play back sounds so the quieter sounds are audible yet the louder sounds don’t get distored.
19 Set up Preparations FL CT FR SR SL SW Setting the volume level of each channel (Adjusting the speaker volume balance) • Since the SUB WOOFER transmits an ultra-low frequency its sound may seem quieter than it actually is. • The speaker volume can be adjusted without outputting the test tone by pressing CHANNEL LEVEL or CHANNEL SELECT .
20 1 Press REMOTE SET UP and 1 at the same time to select the preset mode. The LED on the remote control starts to blink. T o cancel the preset mode at any time Press REMOTE SET UP . 2 Press the MULTI CONTROL button for the component you want to control.
21 Set up Preparations 4 Point the remote toward the component to be controlled, enter the 3 digit setup code. When you enter the setup code, the remote emits a power ON/ OFF signal. If the component turns ON or OFF , you have entered the proper code.
22 Preparations Clearing the Remote Control Settings Clears all presets and restores factory default settings. Press REMOTE SET UP and 0 at the same time for more 3 seconds. The LED display at the top of the remote control will blink. After blinking three times, all the settings will be canceled.
23 Operation Displays & Controls Front Panel 1 ST ANDBY indicator Lights when the receiver is in standby mode (note that the receiver consumes a small amount of power (1W) in standby mode). 2 ST ANDBY/ON button Switches the receiver between on and standby.
24 Displays & Controls Display 1 DTS indicator Lights when DTS mode is being used. 2 2 PRO LOGIC indicator When the 2 Surround/DTS mode of the receiver is on, this lights to indicate playback of a two channel source. 3 DSP indicator Lights when any Advanced Theater or DSP mode is selected.
25 Operation 1 MUL TI CONTROL buttons Use to put the receiver/remote control in the stated mode. For other equipment controls, see Controlling the Rest of Your System on pages 36-40. 2 RECEIVER button (see page 14) Use this button when setting up the surround sound for the receiver.
26 ATT Use to attenunate (lower) the level of an analog input signal and prevent distortion (refer to p.24 - , = ). To use first press the RECEIVER button then operate this button. CHANNEL LEVEL +/– (see page 19-note) Use to set up the levels of the surround sound of the receiver.
27 Operation Sound Modes The sound modes are explained here. There are two cinema modes: ST ANDARD, and ADV ANCED THEA TER. These are designed to be used with multi channel surround sound audio/visual sources (like DVDs and LDs).
28 MUL TI CONTROL DVD/LD TV/SA T VCR/DVR CD LOUDNESS FUNCTION MUTING RECEIVER D.A CCESS CHANNEL AT T VOL MENU TOP MENU VOL CH 2 DSP MODE MIDNIGHT 5.1CH CD-R/ T APE/MD CHANNEL SELECT CHANNEL LEVEL EFFE.
29 Operation Playing Sources with Dolby Digital or DTS Sound Sound Modes 1 Follow steps 1 to 3 of the playback procedure. (Refer to “Playing a source” on the previous page.) 1 T urn on the power of the playback component. 2 T urn on the power of the receiver .
30 MUL TI CONTROL DVD/LD TV/SA T VCR/DVR CD LOUDNESS FUNCTION MUTING RECEIVER D.A CCESS CHANNEL AT T VOL MENU TOP MENU VOL CH 2 DSP MODE MIDNIGHT 5.1CH CD-R/ T APE/MD CHANNEL SELECT CHANNEL LEVEL EFFE.
31 Operation ADVANCED THEATER mode ( Dolby Digital/DTS mode) Switch on the Dolby/DTS mode by pressing the 2 button. When Dolby/DTS/ mode is ON, Dolby Pro Logic, Dolby Digital and DTS, and signal processing is performed automatically corresponding to the input signal.
32 Finding a Station The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the exact frequency of the station you want to listen to, see Tuning Directly to a Station on the following page.
33 Operation Memorizing Stations If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time.
34 Using the T uner 3 Press CLASS to select one of the three classes. Repeatedly pressing this button cycles through the three available classes, A, B and C. 4 Press STATION +/– to select the desired station memory number. Pressing these buttons repeatedly cycles through the 10 available station memories in each class.
35 Operation Making a Recording Making an Audio or a V ideo Recording The following steps show you how to make an audio or a video recording from the built in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV).
36 Controlling the Rest of Y our System memo 1 SOURCE Press to switch the CD, MD, CD-R, VCR OR LD player between ST ANDBY and ON . 2 4 Press to return to the start of the current track. Repeated presses skips to the start of previous tracks. When controlling a VCR, use this button to go back channels (channel -).
37 Operation Controlling the Rest of Y our System memo Cassette Deck Controls This remote control can control these components after entering the proper codes (see p.20-21). 1 SOURCE Press to switch the cassette deck between ST ANDBY and ON (not possible on all models).
38 Controlling the Rest of Y our System memo DVD/DVR Player Controls This remote control can control these components after entering the proper codes (see p.20-21). 1 SOURCE Press to switch the DVD/DVR player between ST ANDBY and ON. 2 4 Press to return to the start of the current chapter (track).
39 Operation DTV Controls This remote control can control these components after entering the proper codes (see p.20-21). 1 SOURCE Press to switch the DTV on or off. 2 TOP MENU Press to clear the DTV menu. 3 Number buttons Use to select a specific TV channel.
40 Cable TV/Satellite TV/TV Controls This remote control can control these components after entering the proper codes (see p.20-21). memo Use MUL TI CONTROL buttons to put the remote control in the stated mode. THE FIRST FOUR BUTTONS ARE DEDICA TED TV CONTROL BUTTONS FOR ANY TYPE OF TV SETUP .
41 Additional Information Cause • The power plug is disconnected. • The protection circuit may have been activated. • Static electricity caused by dry air . • Improper connections. • Sound is muted. • The volume is turned down. • The MONITOR is ON.
42 Additional Information Symptom Broadcast stations cannot be selected automatically . No sound from surround or center speakers. Sound is produced from other components, but not from LD or DVD player . No sound is output or a noise is output when software with DTS is played back.
43 Additional Information Device DVD LD TV CA TV SA T DTV DVR CD Manufacturer TOSHIBA SONY P ANASONIC JVC SAMSUNG SHARP AKAI RCA PIONEER SONY P ANASONIC KENWOOD PHILIPS RCA MITSUBISHI PIONEER RCA ZENITH MAGNA VOX GE P ANASONIC SONY TOSHIBA MITSUBISHI HIT ACHI JVC SHARP SANYO PHILIPS GOLDST AR GRADIENT RADIO SHACK PIONEER JERROLD S.
44 Specifications +0 –3 Additional Information Amplifier Section Continuous average power output of 60 watts* per channel, min., at 8 ohms, from 40 Hz to 20,000 Hz with no more than 0.2 %** total harmonic distortion (front). * Measured pursuant to the Federal T rade Commission’ s T rade Regulation rule on Power Output Claims for Amplifiers.
45 Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
46.
47.
Printed in <ARB7214-A> <99J00ZF00> Please do not ship your product to Pioneer without first calling the Customer Service Department at the above listed number for assistance. 8 0 0 – 4 2 1 – 1 4 0 4 For warranty information please see the Limited W arranty sheet included with your product.
Een belangrijk punt na aankoop van elk apparaat Pioneer VSX-D309 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer VSX-D309 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer VSX-D309 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer VSX-D309 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer VSX-D309 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer VSX-D309 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer VSX-D309 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer VSX-D309 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
