Gebruiksaanwijzing /service van het product LX1251TI van de fabrikant Planar
Ga naar pagina of 35
.
Preface: This manual is designed for use with the LX1250TI industrial display. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subjec t to change without notice.
LX1250TI User Manual 3 USAG E N OTICE .....................................................................................................................................................................................................................
LX1250TI User Manual 4 USAGE Notic e Precautions To maximize the life and safe use of your unit, always be sure to follow the warnings, precautions and maintenance recommendations in this user’s guide. In a Vehicle: The monitor should be visible to the driver only if it is used for navigation, system control or vehicle information.
LX1250TI User Manual 5 Introduction About Planar’s LX1250TI Rugged Touch Monitor The LX1250TI is a high-performance, rugged touch monitor intended for d emanding environments, such as those inside mining vehicles. The monitor features a 12.1-in ch diag onal liquid crystal display with XGA resolution, bright enough to be read in full sunlight.
LX1250TI User Manual 6 Figure 1 Rendering of the display Reference Document # 076 -0672-00 f or detail ed draw ings. Front View (Descriptions): 1. Backlight control + 2. Backlight Control – 3. LED: Green When video present; Amber when there is no video signal present and the monitor will go into standby mode .
LX1250TI User Manual 7 All mounting & str ain relief holes M4 x 8 mm.
LX1250TI User Manual 8 Product highlig hts Designed for demanding transportation environment Optimized for in cab sunlight viewability One button Display/CPU power on/off Control of backlight dimming .
LX1250TI User Manual 9 Package Overview The following items are shipped with the display: Monitor Quick Start Guide NOTE: No cables ship with the monitor. Cables are purchased separately . Installation Before Installi ng Keep the following in mind while installing the m onitor.
LX1250TI User Manual 10 No cables or power supply are shipped with this monitor, they are available as accessories for order separately. Electrical & SW Ins tallation : Prior to end unit installation verify display works with computing system. 1. Power up display: a.
LX1250TI User Manual 11 Using the displ ay: 1. Once installed and cabled. The display is read y to use. 2. Apply system power. 3. Display & Touc h screen are active Using the Touchscreen 1. The LX1200TI touchscreen a llows y ou to operate the computer by touching the scre en with a I nger or stylus, rather than using a mouse or keyboard.
LX1250TI User Manual 12.
LX1250TI User Manual 13 The following table defines the factory set values for the adjustable parameters. *Backlight retains previous brightness settings. Auto Power On The display automatically turns on when power is restored after a power failure and maintains all operational settings.
LX1250TI User Manual 14.
LX1250TI User Manual 15.
LX1250TI User Manual 16.
LX1250TI User Manual 17.
LX1250TI User Manual 18.
LX1250TI User Manual 19.
LX1250TI User Manual 20.
LX1250TI User Manual 21.
LX1250TI User Manual 22.
LX1250TI User Manual 23 Troubleshooting the Monitor.
LX1250TI User Manual 24 If you are experiencing trouble with the LX1200TI monitor, refer to the following. If the problem persists, please contact your local dealer or o ur service center. Problem: No image appears on screen • Make sure the brightness is not turne d all the way down.
LX1250TI User Manual 25 Performance Conditions Performance characteristics are guaranteed over the envir onmental specification range. This product will be in used in the following condi tions: Dusty .
LX1250TI User Manual 26 Volume Control None: through OS control only . Only available on LX1250TI, LX1251, does not have Audio. Function Buttons on Front of display The LX1250TI will have buttons and LEDs on the front of the display for user interaction.
LX1250TI User Manual 27 Touchscreen controller Built into touch screen frame Externally accessible for firmware updat es Video Controller board Requires standard VGA Auto sync on power up and any video mode change.
LX1250TI User Manual 28 Pin Description Pin Description Pin Description 4 Audio in 23 RX2- 17 Gnd Logic 4 3 Audio out 16 RX2+ 20 H plug detect 2 H- sync VGA 25 DVI VGA SCL 19 +5 V DVI 1 V- sync VGA 24.
LX1250TI User Manual 29 USB Manufacture: LTW Part number: LTWUB-20PMFP-SC8002 Description: USB, B TYPE, Female, IP-68 rated Physical Specifications Optical requirements Maximum luminance through touchscreen: 650 cd/m2 (nits) typical Maximum luminance at full dimming Less than 5 nits.
LX1250TI User Manual 30 Voltage Transients Protected against voltage transients above +/-30V for 100ms Reverse polarity protection The display shall have reverse polarity protection as long as there is a slow blow fuse for power 12 V use fuse 2A 24 V use fuse 1A Maximum Power Consumption Maximum: <10 W @ 12 or 24V Typical power consumption: 7.
LX1250TI User Manual 31 VESA Mount A VESA mount feature must be included on the LX1250TI, located on the back cover. Standard 100 and 75 mm VESA mount M4 x .7 threaded hole pattern. The holes shall be blind. Additional M4 threaded mounting or cable management locations on rear of display also inclu ded to support vertical cable routing.
LX1250TI User Manual 32 Regulatory Compliance Electromagnetic Compatibility (EMC) Must be verified to comply with the following: Emissions 47 CFR. Part 15, Subpart B, Class A CE EMC Directive 2004/108.
LX1250TI User Manual 33 Reliability The MTBF of the LX1250TI shall be 30,000 hours at 25°C demonstrated by test or calculation, excluding brightness degradation.
LX1250TI User Manual 34 Product Specifications Overview 5 Display Type LCD Active Matrix Flat Panel Display (TFT) Viewable Size 12.1 inch Display Viewing Area 246 (W) x 184 (H) mm Display Color 262 K .
LX1250TI User Manual 35 020 -1121-00 A.
Een belangrijk punt na aankoop van elk apparaat Planar LX1251TI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planar LX1251TI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planar LX1251TI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planar LX1251TI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planar LX1251TI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planar LX1251TI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planar LX1251TI kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planar LX1251TI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
